Restrict user access to make changes to the form of assignment

Similar Questions

• Directory issues active with SBS 2008. Cannot use NTDSUTIL or management tools or make changes to the DNS.

  In July 2010, I've migrated a SBS2003 system to a system of SBS2008. There were a few hiccups along the way, but eventually everything worked very well and the original server was demoted and closes.

  Fast forward to today, June 2013, and now that I see errors in the event log that read:

  «This server is the owner of the following FSMO role, but considers that it not invalid.»

  "This directory server has not recently received replication of a number of directory servers."

  And when you run NTDSUTIL I can't join the domain controller by name or the domain name. I always get the following error message:
  "Error DsBindWithSpnExW 0x6ba (the RPC server is unavailable".

  I have read and tried all the imaginable solutions I could find. However, the difference between my situation and all the other scenarios that I have met is that there is usually another available domain controller. This isn't my case.

  Here is my configuration:

  1 - SBS 2008 Server.

  7 - workstations running Windows 7 Professional

  I can't run Active Directory users and computers, Active Directory and approvals, or make changes in the DNS. However, DNS is working and my domain controller points to itself as a single domain controller and resolves the name to the IP address.

  That I could track down, it's the original domain controller does not correctly downshift and there is always a ton of references to it in Active Directory, but I can't run any tools to remove the reference and seize the roles.

  Is there someone out there who can help you?

  Thanks in advance for your suggestions

  I would recommend posting your query in the TechNet Forums. This forum is dedicated for windows servers... We'll find a solution much more effective here...

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Unable to make changes to the registry.

  Original title: The status bar notification

  I used to be able to go to regedit, theoretically/local settings, current version, and then in the notification bar and remove previous workflow icon and another thing after the cache then go to Explorer and delete, but now I can not do this way somehow.

  I already know how this hide them

  

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem, you cannot make changes in the registry, that you were able to do before. The question might be if there is a file system corruption or corruption of the registry settings. Then, I suggest you to try the steps below and see if it helps.

  Method 1

  There could be a chance that there is a file system corruption. So, I suggest you run SFC scan and see if it makes a difference.

  The file system check is a utility built into the operating system that will check for the corruption of system files. The sfc/scannow command. (System File Check) analyzes the integrity of all protected operating system files and replaces incorrect versions, damaged, altered, or damaged with correct versions where possible.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7.

  • Go to Start, click all programs and open the Accessories.
  • Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.
  • In the command prompt, type the following command and press ENTER:

  sfc/scannow

  For more information, refer to this link:

  http://support.Microsoft.com/kb/929833/en-us

  Method 2

  If the problem persists, then there might be a corruption of the registry settings so, I suggest you to check the steps in the below mentioned thread and see if it helps you to solve the problem.

  Access denied - owner and/or setting permissions on the registry key

  Registry warning : This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  You can use the following link to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756/

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Windows 7 does not recognize me as an administrator and do not make changes to the notifier of explicit congestion using cmd

  Windows 7 does not recognize me as an administrator and do not make changes to the notifier of explicit congestion using cmd

  I am the administrator also have an account invited and created another user account to see if this helped (she didn't)

  Hello

  If you use the command prompt, you must bring up the command prompt.

  Go in Start / All Programs / Accessories.

  Click on the command prompt and select run as administrator .

  Concerning

• Allow the child to "make changes to the computer.

  How can I allow the user of my child to "Make changes to the computer" as facilities, make her an administrator, or lose its other parental controls?

  I am using Windows 7 Parental control with none of the additional controls. I want to be able to install its programs without asking me to enter my password every 10 minutes.

  How can I allow the user of my child to "Make changes to the computer" as facilities, make her an administrator, or lose its other parental controls?

  I am using Windows 7 Parental control with none of the additional controls. I want to be able to install its programs without asking me to enter my password every 10 minutes.

  You can not. Windows 7 accounts either have administrator privileges, or they do not. There's nothing in between.

• How and in which files that I can combine my computer policy in the html for my captivate project file? I know that I need to make changes on the css, HTML, and I need to add fonts to a folder, but do not know where please help

  How and in which files that I can combine my computer policy in the html for my captivate project file? I know that I need to make changes on the css, HTML, and I need to add fonts to a folder, but do not know where please help

  https://forums.Adobe.com/servlet/JiveServlet/showImage/2-7496573-757050/pastedImage_0.PNG

  This is an image of the files I see

  If the police will not be on the end user's computer, it won't make a difference.

  You should try to include a web font, but you cannot use those during the creation of course, so when you publish or correct fonts you have alignment issues.

• I can't make changes to the settings of Firefox - none of this works

  As usual, when I allow an update firefox Win Desktop, more things gets sacked. God I wish there was an alternative to that shit from ff!

  I can't make changes to the settings of Firefox - none of this works

  It was theme Aeon 7.5 - this is obviously totally redesigned the appearance of the settings options and caused my mouse does not work.

  Thanks for your help - and I'm sorry for the insults.

• Access denied make sure that the drive is not full or write protected

  Original title: when insert my USB it is detected but when I try to copy a file from the PC to the USB it shows an error message. Access denied make sure that the drive is not full or write protected
  When insert my USB it is detected but when I try to copy a file from the PC to the USB it shows an error message. Access denied make sure that the drive is not full or write protected

  Hello

  Thanks for posting the question in the Microsoft Community Forum.

  Will guide us in the question.

  You can try the steps and check if you are able to copy a file from computer to the USB key.

  Method 1:
  You can try to copy the file on computer for USB in SafeMode.
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  Method 2:
  You can try the steps in the article to (KB) knowledge base and check if it helps:
  Error message when you try to delete a file in Windows XP: "access denied".
  http://support.Microsoft.com/kb/298345

  Reference link:

  How to capture a file or a folder in Windows XP
  http://support.Microsoft.com/?kbid=308421

  Hope that the information provided is useful.

  If you need further assistance, please answer and we will be happy to help you.

• How can I save information on a cd - rw and be able to make changes to the documents instead of read-only

  I'm trying to save the information from my laptop to a CDRW. But it wont let me make changes, says that this is a read-only.

  Hi GracieGritton,

  It is not possible to make changes on the data stored in the CD. You must copy the data to the laptop, and then make the necessary changes. You can also make the changes before saving the data to a CD.

• I need my permission to make changes to the network folder

  Hello

  I met a few weird problem on network
  I was provided with security reading group, write permissions on one of the network folder, now, whenever an attempt to read the file is fine, but when I would write or create any folder, it says, "you require permission to 'domainane\myid' to make changes to the file, now, what to do?

  It of permission to my self, I'm already, log on to the domain, but still,

  below things, I did up to now
  1 deleted my self by system admin security group and added again.
  2 done GPupdate, restart my PC with the boot,
  3 - tried it on different PC

  Still no change, can anyone help?

  Thank you

  Hello

  Since the network folder is on a computer in the domain, the question you posted would be better suited for the IT Pro TechNet public. I would recommend posting your query in the TechNet Forums to get help:

  Windows 7 networking TechNet Forums

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Hello, I recently created a website for a client. I also created a brochure with a QR code that automatically redirects visitors to a single page in the site. Well, I had to make changes to the site and I had to change the name of the page in which t

  Hello, I recently created a website for a client. I also created a brochure with a QR code that automatically redirects visitors to a single page in the site. Well, I had to make changes to the site and I had to change the name of the page in which the QR code pointing to. Is it possible to keep the current name of the page but create a page of automatic redirect named like the QR code? Basically, the brochures have all been printed already, so I need the QR code when analyzed in order to continue working. Now, it is not the case.

  Nevermind, I figured it. I've reproduced the page, renamed the QR that indicates the code of the page, and then he hid in the menu of page properties.

• When a snapshot is complete, so I can start to make changes to the virtual machine?

  When I take a snapshot in merge, a progress bar appears in the window of virtual computer, then disappears in a few seconds.

  But a picture of a clock also appears on the Fusion icon in the dock. Only the clock takes a minute or two to disappear.

  What process is the clock?  What is the take a complete snapshot?  When the progress bar disappears, or when the clock disappears?

  Can I safely begin to make changes to the virtual machine, I want to be able to restore, immediately after the progress bar disappears?

  Or, it is more prudent to wait to make changes until the clock disappears?

  Thank you

  (The progress bar and the clock appear in my Fusion 3 that I use always happy... I don't know what appears in more recent versions).

  While the stopwatch turns, Fusion is busy writing the snapshot to disk, so the performance of your comments and your host could be reduced.

  As long as the performance isn't an obstacle, you can continue to use the virtual machine while the snapshot is taken.  Merger will ensure that the snapshot includes the exact state of the virtual machine at the moment, you started the snapshot: nothing of what you are doing inside the guest, while the snapshot is in progress does not affect the State of the socket.

  See you soon,.

  --

  Darius

• How can I prevent the text fields and drop downs changed after the form has been signed using a digital certificate? Thank you.

  Hi all

  How can I prevent the text fields and drop downs changed after the form has been signed using a digital certificate? Thank you.

  There is also a checkbox on the dialog box 'Sign' to lock document after signing.

• Add salary on the form of assignment button

  Hi, hopefully an easy question...
  
  I created a new responsibility that the form of the person and on this form he assignment button, once on the form of assignment, I added the button to pay. in the definition of workflow, I used the SALREVIEW node that uses the launch of the Administration of treatment Page. I thought that everything was set up correctly, but I must be missing something... when I click on the pay button, I get an error box indicating "feature is not available to this responsibility... ».
  
  Thanks for any help

  Dear Sir

  You must add this function that in which you are faced with the question of responsibility.

  Add SAL_ADMIN_LAUNCH this function

• Access 2003 - repeated "You cannot make changes to the database" error

  Hey all,.

  Im having a very strange problem with Microsoft Access 2003, we work with the old databases and when we open them by Access 2003 we get the message "you cannot make changes to objects in database" error, which is expected. However, the laptop began to repeat this message repeatedly about 8 times after the first time that you click on it. Its very annoying to have to keep clicking to get rid of the error message. Its a very strange problem, any ideas on how to solve this problem, or even explain what could of happened will be appreciated.

  Thanks in advance

  PS Ce is not an option for updating the database, we work with a program that uses a database of 97 old and if you update the database the program will stop working.

  Hello

  First of all it doesn't seem that it is a Toshiba laptop failure.
  This looks more like a problem of Microsoft.
  I recommend to check the articles in the Microsoft Knowledge base or / and contact Microsoft technical support.

  I studied a bit and found these pages. Maybe you will find useful information.

  http://www.smartcomputing.com/editorial/article.asp?article=articles/WebOnly/TechSupport/420w10/20w01.asp&GUID
  http://support.Microsoft.com/kb/824260/
  http://support.Microsoft.com/?scid=kb;en-us;824278&SPID=2509&SID=98

  Good luck