Make Windows 8 Pro main administrator user

Similar Questions

• Windows 7 security, permissions, administrative user accounts, access

  My old computer does not start and it was recommended to me to buy a drive external hard drive enclosure, I did.  I put the old hard drive in the enclosure and connected to my laptop.  The laptop added drivers, no problem; However, when I tried to access the drive, I have no access.  I bought the laptop as an obsolete prior to a rental store and removed as an administrator.  I'm the only user and administrator privileges assigned to myself but continue to have access problems.  I tried to change the permissions to grant me the property nothing helps.  Help, please!  I'm in the middle of a very important project and all my data is on the hard drive that I'm trying to access.  I look forward to your reply.

  You may need to take possession of your records - see here:
  http://social.answers.Microsoft.com/forums/en-us/w7network/thread/24bdf172-2DBC-43b8-995d-a99b6a81413c/

  You back up your files after the event: you should consider this incident as a warning shot. Regularly backing up files is not just for wimps. Tough gals lose files too and you is maybe not so lucky next time you have a problem.

• Whento download iTunes for separate iTunes accounts linking 10 separate Windows to make user accounts, I download iTunes from the first main administrator account, or does it download it separately in our own Windows user account

  If we want to have separate iTunes accounts running from Windows 10 separate user accounts can I download iTunes on the first main administrator account, or does download it separately in our own Windows user account

  Install it from the admin account, and then all user accounts will be able to use it.

• Account Exchange does not authenticate to exchange server with a domain under Windows Surface 3 pro 8.1 user

  Hello

  We recently bought a Surface 3 pro from our supplier that has windows 8.1 pre installed (OEM) and I have set up a local user with local administrator rights account, I did windows updates, also activated the account administrator local and then added the device to our area, but I can not set up exchange on the domain user account. I also gave this area local administrator user rights, but it does not check the name on the Exchange Server. It makes the connection to the network, on behalf of the research, but it will not connect to the server. I tried to manually configure upwards, but not luck. When I created this same domain account on a local user with administrator rights, I works very well. I did several times on Windows 7 and never had any problems. Has anyone encountered this problem? Help please.

  Thank you!

  Hello

  Thanks for posting in the Microsoft Community.

  As you said you are trying to connect to the domain network, we have a dedicated team with advanced tools and permission to help with such issues.

  I suggest you to send your query in TechNet forum for better support.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Let us know if you have other questions about Windows in the future. We will be happy to help you.

  Thank you.

• Help! -New Dell i3847 - Windows 7 Pro - Dell Recovery Disk Win 8.1 & DBaR don't make a backup of the system

  I bought a new Dell i3847 and it has Windows 7 Pro 64 bit installed at the factory on it.

  I wanted to make a complete backup of the system, but the Dell Backup and Recovery software does not allow me to make a backup of the system.  In addition, I was unable to create a system recovery disk using Dell backup and restore.

  I can't use the drive system recovery expected Dell because it clearly states Windows 8.1

  (1) why is a Win 8.1 drive included with a Win 7 Pro 64 bit system?

  (2) what is the problem with Dell backup and recovery that she:

  (a) cannot create a recovery disc factory

  (b) allow me to create a backup system so I can go back to the factory State

  Help!

  It has been 2.5 hours and it is still "initialize disk" to create a recovery of the plant.  It usually somewhere fails during initialization or in writing.    Spend hours for each failed attempt to create a factory recovery disc is NOT GOOD!

  The factory restore disk was finally created.

  Dell is now a person pays create a backup system and the user must download a update to do so.

  Microsoft has a tool to create a system image and make a recovery / restore disc which is free.

  So, I used DBaR do restore disk by the factory.

  However, to make a system image and a recovery / restore for that, I used windows 7 built in software.

• How do I disable my account user, password in Windows 7 Pro

  I want to disable password on windows 7 Pro, I have no need of a password. The problem is that the program asks you to turn it off, the 'old' password that I do not have. How to get around this problem and be able to disable this feature.

  Welcome!

  Although the topic says How to disable my user account , I understand that you really mean How to remove my account password.

  I guess you automated your connection years process so that you do not need to enter a password. Fortunately, you can reset this password long since forgotten as follows:

  1. Click the start planet.
  2. Type cmd.exe in the search box.
  3. Press Ctrl + Shift + Enter
  4. Click on "Run as Administrator".
  5. Type the following command exactly:
     NET user "user %%nom" ' "{Enter}
     (this will reset your password for a white)
  6. Type the following command:
     Control UserPasswords2 {Enter}
  7. Check the box "users must enter a user name...". »
  8. Click on your account name.
  9. Uncheck "users must enter a user name...". »
  10. Click OK
  11. Leave the fields blank password and click OK.

  Don't forget to mark my reply as 'response '.

• Through router remote desktop connection gets login screen, but the administrator is the only option (windows 7 pro)

  I have a new windows 7 pro system which has been configured to host a remote desktop connection.  There are 1 user account (active admin), the port number was changed from 3389 and I think that the firewall is disabled (it's Norton Internet Security and I tried to completely disable the firewall).

  When I established a remote connection from another computer on the same subnet, the client asks for login/password and the connection ends and goes directly to the screen of the user.

  This subnet has an internet connection via a firewall or router.  It has been configured to redirect incoming connections for the custom to the host port number.

  When I establish a remote connection from outside through the firewall I am invited to login/password, but the Welcome screen appears and the only options are administrator and other users.  Administrator is blocked for the account restrictions and using other users to type the login and the password does not work - it still fails on bad login/password.

  I've seen this problem described in other forums, but have not seen a solution - anyone got one?

  Thank you

  Hello
  I guess that its due to the settings.
  Check out this link. you might get a few steps.
  http://Windows.Microsoft.com/en-us/Windows-Vista/Remote-Desktop-connection-frequently-asked-questions

  Kind regards.

• Can I make a new installation on new hardware with Windows 8 Pro OEM?

  But seriously, I have a new MB that I need to use as there is a problem with my Chipet a PCB there is some problem with power. I have not really but it's a mess now of working with and I bought a copy of Windows 8 pro OEM System builder and I made sure that if reason I could use the liscence to win 8 OEm on new hardware store and this Orginal Statemant of Microsoft saying it's fine as long as it's only on a PC. Although I found many threads say otherwise and win 8 OEM is not transferable, as are all the Windows OEM. So I ask you once again so I can have a PC is able to install on new hardware?

  Original title: fishing trolling warn... Can I make a new installation on new hardware with Windows 8 Pro OEM?

  Windows 8 Pro OEM System Builder has rights of transfer, then Yes, you can move it to a new computer or the motherboard.

  http://personaluselicense.windows.com/en-US/default.aspx,

  "Can I transfer the software to another computer or user?

  You can transfer the software to another computer owned by you. (You can also transfer the software (as well as the license) to a computer that belonged to someone else if one) you are the first user under the software license and b) of the new user accepts the terms of this agreement. To make a transfer, you must transfer the original media, the certificate of authenticity, the product key and the proof of purchase directly to the other person, without keeping all copies of the software. You can use the backup copy that we do or the media the software provided on transfer the software. Whenever you transfer the software to a new computer, you must remove the software from the previous computer. You can not transfer the software to share licenses between computers. You can transfer the Get Genuine Windows, Pack Pro or Media Center Pack software only in combination with the licensed computer. »

• How to remove a user account from microsoft since the local account main administrator?

  Basically started nitialy I entered my email incorrectly. Then I created a new profile with the correct e-mail and he agreed to become a microsoft account. Then I deleted the old start microsoft account via the browser, as it was useless, because I could not verify that the email was incorrect, and I could not change this without checking the account... Bit of an odd he implemented.

  anyway. Now my main Administrator profile is not a profile of microsoft and electronic mail microsoft profile has no administrative privileges. I also want that one account as theres not point have two if they are identical. I tried to go to the users and manage the account but can't see anywhere. Please help me through this mess

  Hello

  I understand that you are unable to remove a user account that is not listed in the control panel under users, manage account.

  Follow these methods and check if that helps.

  Method 1:
  Please refer to these steps on how to remove a PC user account.

  To remove an account from your PC

  You must be logged in as an administrator to perform these steps.

  a. drag from the right edge of the screen, tap settings, and then tap Change PC settings.
  Press or click accounts, and then press or click on other accounts.

  b. press or click the account that you want to remove, and then press or click delete.

  c. press or click delete the account and data. (Please back up all important data before you delete the user account).

  d. it may take a few minutes, if the account has a lot of associated data.

  Method 2:
  If you are not able to find the user account, and then follow these steps.
  a. press Windows + R and type netplwiz, and then press ENTER.

  b. in user accounts, select the user tab.

  c. now, click the account you want to remove and click Remove.

  Check if it helps. If the problem persists, we would be happy to help you.

• Windows 8 Pro includes the MLUI (multi-Language User Interface), as Windows 7 Ultimate?

  I find this feature very useful and I was wondering if it is also available in Windows 8 or Windows 8 Pro.

  Indigo salvation,

  The ability to install the Multilingual User Interface is available for all editions of Windows 8.

  "For Windows 8, we redesigned the experience of display language, focusing on the additional input displays the languages available to all Windows users, which makes them super easy to find and install and allowing users to switch between them."

  Take a look the MSDN Blog for more information:
  With the help of the language you want

  Thank you!

• Different drag / drop behavior of the mouse on different users on the same virtual machine Windows 10 Pro accounts

  I just upgraded to 8.1 on Mac OS X 10.11.3 Fusion "El Capitan" on a new iMac 27-inch 5K retina. The guest operating system is a new virtual machine Windows 10 Pro. I have two user accounts on the virtual machine, my local administrator account and another account local standard user. When I am logged into my account, I am able to drag and drop files to and from the guest to the normally Mac OS. As the mouse moves freely between the guest OS and the Mac. However, when I connect using the standard other account, I can't drag - move to and from the guest for the Mac OS. Also once I click into the virtual machine the mouse movement is limited to the virtual machine until I have press the buttons on the Mac to free the movement of the mouse to the Mac. I tried to uninstall and reinstall the vmware tools but the same behavior persists. Any ideas on a solution and why these two users accounts would act differently?

  Just phone with the help of VMware. They solved the problem in uninstalling and reinstalling VMware tools and change the following VMware Fusion preferences-> preferences-> General-> Gaming: to 'Never mouse optimize for games '. It has been set to 'always optimize the mouse for games '.  After that drag & drop, mouse movement works smoothly and perfectly now. Thank you VMware support!

• Upgrade to Windows 8 Pro fails miserably, why?. What can I do to make sure it works this time.

  DV6 - 7247cl just bought 1 week ago, I bought windows 8 pro upgrade pack and backed up my windows 8 base images.  When to perform in-place upgrade today ' today-all seemed well until it has restarted and came to a start with three boxes menu: Windows 8 on volume 4

  Windows 8 on volume 4

  Installation of Windows

  I tried all 3 and each of them became all black and then blue screen, your computer has encountered a problem....

  I went into recovery options and each tried and nothing worked.  The last option that I came was to make Factory Image Recovery, I need Windows 8 Pro because I join domain and use Bitlocker and start with the virtual hard drive.  Why it failed, would it secure boot or UEFI.  Please tell me what I can do to get this update to work.  The upgrade looked like it was working but then wouldn't boot into Windows more after the reboot.

  Sorry for the experience with the support of Microsoft. I wasn't expecting that. Let us try the old process to restore the system to the factory settings, uninstalling unwanted applications and then create an inplace upgrade to Windows 8 Pro. Let's see what happens this time.

• Make an ISO of a system running (Windows XP Pro SP3)

  I have a few HW record that has ONLY the drivers to run on XP - I DO have a Windows XP machine!

  I just upgraded to a machine more powerful and you have installed

  Windows XP Pro SP1, then

  Updated til SP3, then

  upgrade to SP3

  and then I installed all my SW - Total use on the 11 GB disc - and the machine is runing like a dream!

  It's a job to do all this, so I was wondering if I cam make an ISO of the entire installation file - because it's 11 GB there must be on severel DVD?

  If not the whole installation, then only the OS would be very nice to make an ISO of only one file.

  If yes how can I do that?

  Yes, use a disk imaging software to create an image of the entire hard drive.  In fact, if you have an external hard drive - reasonable size, you can (and should) make periodic images of the disk as backups.

  A diagram would be to do an image immediately after the system has been setup as you wish.  Then make a series of periodic backup images, with the frequency of backup images depending on how often you make major changes and the number of backup images (before throwing 'old') depending on the size of your external hard drive.

  Here are a few representative programs.  Most created images or clones, but some may be cloning applications only.  Some are free, others are not.  Vs clone image

  If you have a Western Digital hard drive, you can get a version of Acronis True Image free of WD (http://support.wdc.com/product/downloaddetail.asp?swid=119) or you can get the software of cloning separately (this is not an exhaustive list and in no particular order, some are free, some not):

  Acronis True Image Home
  EASEUS ToDo Backup
  Paragon Drive Copy or Partition Manager Personal
  Casper
  XXClone

  Macrium Reflect free

• unusual files in the user part of windows xp pro.

  Hi, this could be something I did and maybe not. If I go to Documents and Settings all users, it has acquired a two different application data folders. And on top of the USER folder now has one in this document, 'MY Documents' and if I try to delete the file it deletes all: MY Document: files. I don't know what I did. And I have no idea on how to fix.
  I usually keep all four records: administrator, user by default, all users and users of vacuum. With the exception of all users. I keep the rest blank. It is a single computer and I'm the only person who uses it. Also, the start Menu folder has a folder Administrator.
  The user file is large 120 gigas!

  If anyone has any ideas I'd like to hear from you.

  Thank you

  genedm

  Hello Gene,

  In Windows XP, there will be some default files in the c:\Documents and Settings folder.
  c:\Documents and Settings\Administrateur
  c:\Documents and Settings\All Users
  c:\Documents and Settings\All Users
  c:\Documents and Settings\Default User
  c:\Documents and Settings\LocalService
  Etc. are some of these files. For the Normal operation of Windows XP, we have all these files in these place.
  It seems that all of these files, you mentioned is good only...

• Windows XP logon screen - Pro - can the user's list be oriented horizontally rather than vertically?

  I would like a list of the Windows XP logon screen - Pro User horizontally rather than vertically?

  Windows-7 lists horizontally and allows several user names be seen without scrolling down.

  Windows XP - Pro can be modified to do the same thing?

  Sorry Mike Lynch, but you can not list horizontally. But try to use aWindows 7/Vista theme. It can the list of users the list horizontally.

  I hope I helped!

  -MIFRAS