Making mobile phones Focus on text fields

Similar Questions

• A message from windows live saying the acct has been hi-jacked by a hacker and they wanted our mobile phone # send a text msg to solve the problem.

  problem of pirate?

  We received a message from windows live saying the acct has been hi-jacked by a hacker and they wanted our mobile phone # send a text msg to solve the problem.  We have not so much text msging and then they want all sorts of personal information (name, DOB, address, e-mail addresses, etc.) and we do not want to do that.  is this a legitimate windows msg and is it possible that I can call someone from microsoft was finishing speaking?  Thank you.

  Hello

  That sounds like a SCAM don't respond so not! Unless you have launched the contact of its likely someone
  I'm trying in fact to steal your account and your identity. If your account has been compromised, see the
  below.

  Unfortunately the answers is a site of support of peers supported and has no real influence
  with Windows Live.

  Check with Windows Live Support and Forums

  Windows Live Mail Forums
  http://www.windowslivehelp.com/forums.aspx?ProductID=15

  Windows Live Solutions
  http://www.windowslivehelp.com/solutions.aspx?ProductID=15

  Windows Live Solution Center
  http://www.windowslivehelp.com/

  Compromised account - unauthorized account access
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Muse of the synchronized text fields disabled during the download of 3rd party hosting

  The customer site is done in the office and in a version of the phone. The text field for the menu of the day, which he is editing with the 'inbrowserediting.com' function is implemented as a synchronized text. Great, but it does not work! I assumed that it is has something to do with PHP, then I changed hosting and now all these features (also the supplier confirmed it).

  But once again: it does not work.

  After downloading by ftp to a third host, I get the message, that muse disabled the inbrowser function because it seems the host does not support redirection of Web sites.

  -> and then... the text synchronized the ist field cannot be changed.

  I contacted the supplier and that he thinks that all actions are enabled and it should work

  The question now is:

  Which confirms exactly MUSE during the download? are there other technical bases that must be met? I can't find something. No description about this article.
  

  Y at - it ideas? Thanks in advance!

  I found the solution in this discussion (which I have not found before... Sorry ;-).

  Re: Why I can't use in browser with synchronized text editing?

  Thanks anyway!

• How can I add text to photos save to JPEG? The photos have been imported into my computer from a mobile phone

  How can I add text to photos save to JPEG? The photos have been imported into my computer from a mobile phone

  Hello

  What operating system do you use?

  You can use the paint on windows feature to add text on the pictures.

  Reference:
  http://Windows.Microsoft.com/en-us/Windows7/products/features/paint (you can also use this article for windows vista)
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/app_paintbrush.mspx?mfr=true
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/mspaint_overview.mspx?mfr=true

• How can I send sms text message from my Windows 7Pro PC to any mobile phone?

  SMS from the mobile phone PCto

  How can I send sms text message from my Windows 7Pro PC to any mobile phone

  By electronic mail.  Exact address depends on the carrier.

• By lining up the spaces between the text fields in the horizontal panel layout group - mobile ADF

  

  Hello

  I created a mobile page of ADF sample as shown in the image above. All components have been aligned perfect await the fields Firstname and lastname fields IE whose number of 971, 50 and Mobile.

  The problem is arraging spacers between these fields aligned horizontally. I used the available to the Group Panel with page layout in horizontal. But when I gave the first two got fields narrowed spacers between them, and the last field that is mobile has become normal. My requirement is the first field that has '971' to go to the far left and the width of the Mobile phone, input field must be increased, and also the alignment of the spacers should be uniform in their full horizontal. IAM can use spacers perfect between them. How can I achieve this? Please help me solve this!

  < amx:panelGroupLayout id = "gp1" layout = "horizontal" >

  < amx:inputText value = "971" hintText = "Country Code" id = "it3" inputType = 'number' / >

  "" < amx:inputText value = "50" hintText = "code" id = 'it8' inputType = 'number' / >

  < amx:inputText value = "#{pageFlowScope.mobile_number}" hintText = 'Mobile' id = "it6" inputType = "number" / > "

  < / amx:panelGroupLayout >

  This is the code I used. Please suggest me a solution

  That you do not use labels you can set the simple = "true" for components Inuuttext property. This will give you the space designed for the label. You must set a fixed with components as the panelGroupLayout handles this better,

  Timo

  PS Please tell us your jdev version!

• How to set the focus to a text field.

  Hello
  I have a form that contains 5 textfields. When the form is loaded, by default, the cursor should be on the second field. How can I concentrate on the text field.
  I checked in the API of the TextField object, and it is observed that the focusedProperty is a read only field.
  
  Can someone let me know how to focus on the desired TextField. ?
  
  Thanks in advance.
  The SAI Pradeep.

  Use textField.requestFocus)

  If your node is not always lay out to the point because of a management of the default focus of the javafx platform, wrap the call for development in Platform.runLater

• set the focus to the text fields named incrementally

  I created the many (hundreds) of the fields of text through actionscript. I gradually name them and place them on the stage and then subsequently access to set focus.
  I use create a textfield object:
  var txtbox:TextField = new TextField();
  
  and then use a name incremented to the text field to identify it later:
  
  var txtname:String = txtn + txtcnt; txtcnt is a number incremented variable. txtn is a string variable.
  txtBox. Name = txtname;
  
  I add an eventlistener on stage. The event listener works very well and has a companion function.
  I can identify the text field I want access once the move is running through his name.
  Then I use this .name property to set the focus:
  
  internship. Focus = "txt88";
  
  Again, "txt88" is the .name of the text field.
  
  What I am doing wrong?
  
  ypeError: Error #1034: Type coercion failed: cannot convert "txt88" in flash.display.InteractiveObject.
  to MethodInfo-(200)
  
  
  Also, I tried to use the variable incremented during this step, but get a msg of error affecting the variable this way textfield name.
  var txtname:TextField = new TextField();
  

  Awesome!
  Who did it! I appreciate your help. It is a major obstacle and I went through the help files and books without success. (If it works fine in the AS2 version!)
  Anyway, you are a lifesaver. Thank you.

• Set focus to the text field

  Hello...
  
  Alread search on the forum but I can't find my answer...
  
  I need my text field early with a focus when my page load... How can I do? West an attribute apex or must be in javascript? If anyone can help with this?
  
  tnks to all

  If your textitem is the first element on your page that you can set in the properties of the page

  Display the attributes > Cusror Focus > for an object on the Page

  If this is not the case, try to add to the footer of your page:

  html_GetElement ('P1_TEXTFIELD'). Focus();

  Where you need to change P1_TEXTFIELD in the id of the item that you want to set the cursor focus.

  Denes Kubicek
  ------------------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  ------------------------------------------------------------------------------

• A program in which I can send sms or mms text to a mobile phone from my computer.

  I don't have possibility to send SMS on my mobile phone service plan. I wish seng SMS to my friends who have this free on their mobile phone service plans. I was told there is a way to do this without going through each site of phone carriers. If someone who knows how I can do that on my computer please, please help me?

  Verizon: phone 10 digit # more:

  @vtext.com

  or:

  @vzwpix.com (for pix)

  AT & T:

  @txt.att.net

  or:

  @mms.att.net (for pix)

  Google for the rest.

  Bruce Hagen ~ MS - MVP [Mail]

• How to get an image of text from a mobile phone to laptop

  I have the right wire to connect the phone to a USB for laptop but do not know the steps to actually see. I had to download something I did. Now how to see it

  Hello

  Most of the cell phones available today can be connected and synchronized with a PC to transfer data. Most of us would want to transfer songs, videos or other documents in our PC in our cell phones. The simplest method to transfer data between a mobile phone and PC using the data cable. The following steps show the procedure for a session of data transfer between your computer and mobile device.

  a. connect your phone to the computer via a data cable. Connect one end of the cable to your phone and the other end of the USB drive on your PC. The data cable is a cable that usually comes with the pack of your cell phone.

  b. Insert the CD supplied with your phone portable pack into the CD into the computer and install the necessary drivers for your phone. When you're done, eject the CD from the drive and restart the computer.

  c. download and install the utility mobile freeware. It is a simple software utility that allows you to view and manipulate the contents in the cell phone to your PC.

  d. start the utility and wait until it detects automatically and detects your wireless device.

  e. click on the folders to view its contents in the right pane. Locate the files that you must transfer between PC and also select the file whose content must be transferred to your mobile phone.

  f. after the file transfer is successful, close the utility, then disconnect the data cable from your PC first and then cell phone.

  g. restart your mobile phone and go sailing in the target directory indicated during the transfer of files to find the files transferred from your PC to mobile phone.

  For your reference:

  Connect to Bluetooth and other wireless or network devices

  http://Windows.Microsoft.com/en-in/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  Install a USB device

  http://Windows.Microsoft.com/en-in/Windows7/install-a-USB-device

  It will be useful.

• Code for mobile text fields?

  I am just trying to cram a few learning in and become familiar with the basics of HTML and CSS, but I hit a block stumlbing. Sorry if I sound a bit stupid here, I'm getting just not this thing whole css at all, I don't understand how it works.

  Anyway now that I'm just trying to create a basic website, nothing complicated and I want at this stage are a background, images I can drop and drag whenever I like and especially of the text fields I can do the same thing with. I managed to find how easily place images on the page using the code - next

  < div > < img src = "image" width = "300" height = "466" alt = "" style = "position: absolute; top: 68px; left: 280px; / & gt; & lt; /p & gt;

  & lt; class p = "style2" > < / div >

  but when it comes to text is I seem to be forced to positioning itself as a word document, that is to say. left, right, Center etc...

  I watch the tutorials, in google search, and play with dreamweaver, but just can't seem to find any way to insert the same kind of... .layout object? where do I insert the text and then click on and drag, change the size of the text field and just place on the page somewhere, next to the image, below, where it is best according to me. I just want a piece of code that does this, it seems to me quite a basic function, and that's all I want at this point, just basic has to form the structure of my site, so I can get it square and then continue and further develop. I can't find anything anywhere that explains how to do this! So, I start to wonder if it is even possible and maybe completely misses me the point on web design.

  Can you please explain this or tell me a little bit of code that does the same as the code above to place images, I can insert text in and change size and drag and drop easily with the mouse?

  I spent the day ripping my hair out trying to figure this simple thing in order to climb and build my site. Until now, I've been with tables, but I don't think it's a very good way to address the issue.

  Help, someone, please! Some code is all I want and then I can go up and build the rest of my site...

  No worries. No idea how to get the text to remain fixed on the bottom, I don't know what it is who changed bewteen the two exmaples I posted.

• BlackBerry Z10 writing new Messages - Contacts combines a Mobile phone number, home

  When I chose to compose a text Message and select by a Contact who has multiple phone numbers stored, the phone selects the telephone number of the Contact homepage default rather than their Mobile phone number. I'm doing something wrong?

  I did a little experiment, created a group with 1 contact, send a text message to the group, sms went to the house number.

  I deleted then house number (which was at the top of the list) then added a new home field. After that the number of publishing house has yet shown on the top of the list, but sms now went to the Mobile number.

• FlowFieldManager not 'compatible' with the text fields?

  Hi all.

  I'm making an icon to follow the end of a given text. A bit like the phoneLog done with the green phone icon next any number that you enter.

  I tried the substitution of the DrawText, but unfortunately after conditioning to the new line I don't have an X coordinated to begin to draw.

  That's what I would like to:

  +-----------++-----+

  | text 1234 | icon |

  +-----------++-----+

  After entering the text more:

  +--------------------++-----+

  | text 1234567890 | icon |

  +--------------------++-----+

  Unfortunately FlowFieldManager encapsulates the new line icon

  It seems that she's done this before and after each text field. If I have two icons, one after the other, they have a format horizontal, but at the moment where I have to add a textField, it is wrapped in a new line (are complemented by the icons) or icons are pushed to the next line (if the text box before the icons).

  So, how can I add this icon to track the length of the text?

  The problem here is that text fields normally tell their manager encompassing that they want to take the entire width.  FlowFieldManager who will respect and give them the entire width.

  You will need to customize the text field, replace the functions of layout and width and make sure he asks only the size that he actually need.

  If the text cannot be updated, and then you try to use rather than RichTextField LabelField.  LabelField asks only the width he needed.

  Sorry I can't give you any appropriate code because I have never done this.  I did not because from a user interface point of view I don't think it looks good.

  This mechanism can fail when the text field resumed more size on a width - fields are always "rectangular".

• By assigning a value to a text field not working PHP/javascript?

  I have a site to someone else coded, where a text field does a value that is assigned.

  Both
  Form1.textfield3.value = form1.textfield1.value;
  and
  Form1.textfield3.value = "99";

  not work, and the field is left blank.

  This same code works on Internet Explore (Win and OSX), Safari, Chrome and Opera. It does NOT work on Firefox 8 or 9.01 (Win and OSX) or 3.6.25. He used to work on an older Firefox, we had (unknown version).

  JavaScript is enabled; is there anything else we can check?

  If you check the error in Firefox (Ctrl + Shift + j) Console, you will see "form1 is not defined. This is because Firefox converts automatically form1 in reference to < form = "form1" name >. Instead, you must change the code a bit.

  You can fix the above error starting each function where you refer to form1 with this:

  Form1 = return ["form1"] var;

  However, probably just move the error to the next part of the notation (for example, textfield3). The proper way to refer to the value of a form field named is:

  document. Forms ["Form1"]. Items ["textfield3"]. Value

  or if you have set form1,

  Form1.elements ['textfield3'] .value

  If you have a few changes to make. Not sure if there are shortcuts.

  This forum focuses on the care of the end user. You can find more help web development on the mozillaZine Web Development Council. Separate forum, separate registration.