Management command ship confirm API

Similar Questions

• Ship confirmation error.

  While the ship confirming an order there is an error - the Action cannot be completed because the selected records are not eligible.
  
  What is the reason for this?

  Hello
  There may be multiple reasons for the error. Click on "Details after getting the error for more information.
  some of the reasons for the error can be
  The command line is awaiting confirmation of the ship. Hold to check on the command line
  If item is controlled series and the line is cut in half after withdrawal receipts, serial numbers are unassigned. Check all lines not assigned a Sanchez
  If you don't use a localization of the India, there are certain conditions related to the location of the India which prevents the ship confirmation

• Manager command line tool extension works is not in Windows 10

  Hi all

  When we try to use the Extension (exmancmd.exe) Manager command-line tool to install a new Panel in Windows 10 his watch denied access message.

  Also, when we try to see the details of command Exmancmd.exe line its says "this application cannot run on this PC.

  Please find the screenshot.

  

  Thank you and best regards,

  Anoop

  Maybe it's some setting (?) Windows security; works well on my Win10 systems.

• After the ship confirms delivery is not inserted into the table WSH_DOCUMENT_INSTANCES

  After ship confirm, sheet print Pack but the pages are not virgins no data.

  Then when I tried to submit the request manually, it did not allow the delivery name is set to the name of delivery.

  I checked and found that the delivery data are not there in the table WSH_DOCUMENT_INSTANCES.

  Can anyone here help to explain the data inserted in this table and in what scenarios, this problem may occur, where the data is inserted in this table.

  And how the pack slip can be reprinted.

  Found the Solution

  Profile of sequential numbering option was not setup at the level of the Application for the execution of the shipment.

  Defined as always used for executing shipment and that worked.

• Extensions Manager command-line tool will not install extension for Photoshop CC 2015

  I use Photoshop CC 2015.0.1 on a MacOS 10.9.5

  I try to install the extension FlatIcon found here: http://www.flaticon.com/download-plugin#

  Using the information I found here: https://helpx.adobe.com/extension-manager/using/command-line.html

  I downloaded, unpacked and installed the Extension Manager command line tool: http://www.adobeexchange.com/ExManCmd_mac.zip

  (I found the link to this file here: https://www.adobeexchange.com/resources/28)

  I opened the Terminal and entered in the following:. / ExManCmd - install "Users/angyb/flaticon-CC-2.5.5.zxp".

  And he received in response:

  dyld: library not loaded: @rpath/LibExManCoreLib.dylib

  Referenced from: /Users/angyb/./ExManCmd

  Reason: image not found

  Trace/BPT trap: 5

  Other that to wait for the author of the extension release a Photoshop CC 2015 compatible Installer, do you have advice on what I need to do to properly install this extension?

  Thank you.

  I just found this today that allowed me to install a plug-in for Photoshop CC 2015:

  Site - Installer Zxp

  Install it, run it, and then drag your file zxp the indicated place. Voila! Extensions to work Photoshop CC 2015!

• Ship Confirm runs at unity of ORGANIZATION or e/s?

  We get the following configuration:
  
  CEN (UO)-> CEN (IO)
  
  NOR (UO)-> OR (IO)
  
  We have created a SO to CEN which will ship of the NOR.
  
  We have created a SO to CEN (which, in our view, is the ORGANIZATIONAL unit)
  We release the SO to CEN (what we believe to be UO also)
  We transact the MO to NOR (which we believe is IO)
  
  and we can do
  (1) ship confirm the NOR using a responsibility of the OM that point to the CEN OR.
  (2) ship confirm the NOR using a responsibility of OM linking to NOR UO.
  
  where actually confirm the ship is done? CEN OR? or NOR IO?

  Ship confirm is done NOR IO.

• Guests of Catalog Manager command line

  Hi all
  
  I found a great blog on how to generate reports of catalog command-line from blog below.
  
  http://www.rittmanmead.com/2010/06/Oracle-BI-EE-10-1-3-4-1-Catalog-Manager-command-line-options/
  
  When I try the above, it did not work for me. I'm getting ""catalogmanager"is not recognized as internal or external command an executable program or batch file."
  
  can you get it someone please let me know what file I need to run the above commands. I use OBIEE 11 G.
  
  Thank you
  Neeraj

  Hello

  The path is MWHOME\instances\instance1\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\catalogmanager\runcat.cmd

  The command below will give you a report in excel format

  runcat - cmd report - C:\middleware1\instances\instance1\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\catalog\SampleAppLite outputFile offline - c:\report.xls - excelFormat-delimiter ""-"Analysis" "Column" type "table"

  You can run runcat - cmd report - help to see more options.

  I hope this helps.

  Thank you

• Ship confirm the determination of the rule after the expedition

  Dear all,
  
  How to find one, which ship confirm the rule was used to ship an order once the order has been shipped?
  
  Either by Frontend through backend.

  Sery
  wsh_picking_batches aura. Batch_is has nothing, but your number of strokes used to pick up confirming (mtl_txn_request_headers). From there, you can link the tables too expedition.

  Thank you
  Claire

• Generate Docs before ship confirm

  Hello
  
  
  I need to generate shipping documents, packing slip and product customer label the front of the ship report confirmed.
  means that I have to call these documents before confirming ship.
  
  So can someone please tell me how I can do this. is there an API for this.
  
  Thank you

  Have you tried wsh_deliveries_pub.delivery_action with PRINT-DOC-SET action?

  Thank you
  Claire

• 3rd party RAID management commands execution?

  Hi all

  When I SSH directly in one of my hosts, there is a command set available to manage/monitor the RAID called promise-raid-cli. I can access it simply by typing promise-raid-cli and it opens up a new series of options to order for me.

  I try to use the vMA, and target an ESXi host directly and run this command, but it says not found. How is it? This would act as if I'm in the shell locally?

  I even went with regard to a know exactly where that file was on the ESXi system, it is/sbin/bride-raid-cli, the VMAs and on a specific target of ESXi, I did a cd /sbin/ then promise raid cli and I still have nothing. I even do a LS and it is not listed. However a LS on ESXi local shell displays this file.

  Why the vMA cannot run or see this command?

  vMA is a virtual appliance that has pre (vCLI) remote control command-line tools installed and ready to use, when you set the target you say just what host to run commands on making not really an SSH remote login to the ESXi host.

  CLI is only on the host computer, and not the part of vCLI and therefore not accessible through vMA.

• From server managed by using the Node Manager command line

  Hello
  
  I have configured the Node Manager and it is connected to the administrator of the server without problem. Now, I wanted to start the server managed through the console but it is a failure and my guess is that the syntax of the command line used is not correct.
  
  My question is, how do I change the command line used to start the Node Manager-managed server? I try to use the configuration tab start the server and it seems that does not. I also try to update the file .properties for the managed server.
  
  Whenever I look at the managed server logs, it gives me this line...
  
  NodeManager > < start WebLogic server with command line: <>...
  
  The command-line in newspapers aren't what I put in the .properties file or on the Server Start tab. She is from somewhere and I don't know where. I just want to set up the command line Node Manager uses to start a managed server.
  
  If all goes well, I'm clear with my problem and someone might be able to help. Thank you.

  You can try to follow the Option-2) mentioned in the link below: http://jaysensharma.wordpress.com/2010/03/26/nodemanager-based-managedservers-setting-mem_args/

• BEEP report fails to print automatically on ship confirm (all documents)

  Hello
  
  We replace our Oracle of the custom reports with reports of BIP in EBS 11.5.10.2 and just, we replaced our Bill of lading custom with a new version of BEEP.
  
  When the report is run manually, and the PDF file opens in a browser he realizes very well...
  
  When it is performed manually and the PDF output is sent directly to a printer using the style 'Editor of PDF' report also works very well. Apply the default model, that we specified in the simultaneous programs section place settings (tab) using the responsibility for the Administration of the system...
  
  However, when our ship users confirm all they get from their printers is given raw XML. The format patterns are not be applied, but only when the reports are called automatically in all documents.
  
  It's impact on the production and any contribution is appreciated.
  
  Scott

  MetaLink Note 413108.1 might help.

• Set by default in the management commands 11.5.10.2

  Hello
  
  I found my error in 790103.1.
  
  
  I ordered and I want copy this sales order and change the type of command to return. In the standard copy function does not copy point FAB. That's why I created the procedure.
  
  create or replace package xx_lp1 is
  
  function xx_get_fob (p_database_object_name IN VARCHAR2,
  p_attribute_code IN VARCHAR2) RETURN VARCHAR2;
  end xx_lp1;
  
  create or replace package body is xx_lp1
  function xx_get_fob (p_database_object_name IN VARCHAR2,
  p_attribute_code IN VARCHAR2) RETURN VARCHAR2 IS
  p_fob varchar2 (100): = NULL;
  p_header_rec OE_AK_ORDER_HEADERS_V % ROWTYPE;
  BEGIN
  
  p_header_rec: = ONT_Header_Def_Hdlr.g_record;
  
  Select FOB. LOOKUP_CODE
  
  in p_fob
  of oe_order_headers_all volume.
  oe_order_headers_all ohas,
  Fab FND_LOOKUP_VALUES_VL
  where ohar.source_document_id = ohas.header_id
  and Fab. LOOKUP_CODE = ohas.fob_point_code
  and ohar.order_number = p_header_rec.order_number;
  -Select "04FCA" in the double p_fob;
  
  If p_fob is null then
  Returns a null value.
  end if;
  
  If p_header_rec.order_number is null then
  Returns a null value.
  end if;
  RETURN p_fob;
  
  EXCEPTION
  WHILE OTHERS THEN
  Returns a null value.
  END;
  
  end xx_lp1;
  
  Default configuration FOB Point.
  I've added new type default 'always' condition and source attribut1 PL/SQL API and xx_lp1.xx_get_fob OE_AK_ORDER_HEADERS_V.
  
  Procedure always goes to others.
  
  Could someone give me some advice?
  
  Kind regards
  Luko

  Hello

  I found my error in 790103.1

  Thanks for sharing the solution.

  If it is no longer a problem, please mark this thread as answered for others he can view later.

  Thank you
  Hussein

• Node Manager command 'CALL' failed done Oracle 12 c

  Hi all

  I started the servers like this

  (1) node manager started. Running successfully

  (2) logical web Admin Server started. Running successfully

  (3) Wls_forms server started. Running successfully

  (4) Wls_Reports server started. Running successfully

  (5) http Server. ohs1 running successfully

  After I began namingservice.bat 14021-> the appointment service has started successfully.

  But when I start the server reports-> startComponent.cmd rep_wls_reports <-my name of report server started successfully.

  Status is displayed in the Console of Node Manager rep_wls_reports now works.

  But after awhile, he launched the warning

  < WARNING > < order Node Manager 'INVOCATION' unexpected failure due to: [Plugin not found for the 'ReportsServerComponent' system component type, type of plugin "METRICS"].

  Please check Node Manager log or journal of the server for detailed information. >

  Please provide the solution? How do I solve this problem

  Thanks to everyone who helped me.

  My problem has been resolved I have reinstall java, weblogic, and forms 12 c my problem has been resolved.

• Having to manage update person p_name_combination_warning API in my package

  Hi all

  I created a package for updating the data of people using hr_person_api for a conversion process.

  When I try to update an employees appoint his throw p_name_combination_warning. In the Application, it prompts you for decision or not to continue and if we click Yes it will update the name provided as it is. I want to apply the same in my code also. That is to say whenever the combination name warning occurs, it must be deleted and complete the update.

  Your input will help me. Thank you.

  The API going, the warning is returned to a variable boolean not as an error in the API; If you want to proceed when it returns true just commit.