Management of the transition from the page = reverse do not work.

Similar Questions

• the page flow does not work after deployment on application server

  Hello
  
  I created a stream of very simple page resulting from page 1 to page 2 by link. I tested by jdeveloper Run with built-in server which took place as planned. However, when I deployed to the server integrated as a stand-alone application, the work of the page did not. I clicked on the link, the action of the method, however, the page does not advance to page 2. It looked like some kind of security problem, but I did not all security measures for the application. No idea what is the problem? Thank you.
  
  I use jdeveloper 11.1.1.6.0.
  
  Published by: 883652 on November 5, 2012 03:17

  Make sure that the two pages are defined in your workflow task Unbounded (adfc-config. XML) and when you go to the first page, remove the extension of the URL (for example .jspx) page.

  CM.

• Stop loading the page function does not work

  When you try to stop loading a defective or incomplete url the browser still loads a page or load a search engine. Only one I've found to get around this undesirable feature is to press the stop loading shortened the page several times.

  The problem probably lies in the browser making the request to load TWICE (or more) instead of once. Which means that just hit the stop button once has no effect, because you stopped only one application, the other is leaving still active...

  So my question is: how to stop this annoying behavior?

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  Once you get the pop-up, simply select "" boot mode safe. "

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• The Menu items in the page header do not work

  When Web pages have "menus" in the head like on your page using Firefox, I can't access it. for example today I signed I can't disconnect. This also occurs on the page of Lloyds bank Sainsbury shopping page and also

  The extension of the Yahoo! toolbar reported that causes this problem. Disable or uninstall this add-on.

     * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
  

• To work with the text to the assignment by the cursor of the large fragment of page it is necessary to change all the time down, 'against the judgment", but the page automatically does not start to rise upward, as happens in other browsers. I ask you for

  After the transition to Windows 7, there was a problem with Firefox. To work with the text to the award by the cursor of the large fragment of page it is necessary to change all the time down, 'against the judgment", but the page automatically does not ascend to the top as it was earlier, and like that occurs in other browsers. It is necessary to press the other key "down" which is him very troublesome. Resettlement on an earlier version (8.0) earlier irreproachably working, gave nothing. I ask you to help

  You must activate the module bar (Firefox > Options or view > toolbars;) CTRL + /) or find bar to make Firefox scroll the page while selecting the text (Ctrl + F).

• Connection problem: trying to connect to my computer at the title of the administrator, but after I put my login in it goes to check on the page and will not let me connect

  Try to connect to my computer as the administrator, but after I put my login in it goes to check on the page and will not let me connect. The regular connection for the computer works fine.  Any ideas?

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  It is the instance of Vista installation.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/threads

  Adjust settings, manage user accounts.

  Try the Forum above to repost, if necessary.

  See you soon.

  Mick Murphy - Microsoft partner

• page up and down and the arrow keys do not work, they do on any other programs

  Page up and down and the arrow keys do not work or jump at the bottom of page.

  You may have accidentally entered mode 'Keyboard Navigation. The F7 key will toggle "Keyboard Navigation" on or off.

  • See-> http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• Unexpected error in the property page. The VSS service uses the system restore does not work. Error (0 x 810000202). __

  original title: "there was an unexpected error in the property page. The VSS service uses the system restore does not work. For more information, see the journal of events (0 x 810000202). __

  "There was an unexpected error in the property page. The VSS service uses the system restore does not work. For more information see log of events (0 x 810000202).

  Please try the troubleshooting below to check the status of the shadow copy Volume service

  1. click on start > all programs > Accessories > run

  Type the following text in the run window, and then click ok:

  Services.msc

  You will get the Services window.

  2. Please check service Volume shadow copy service is "started" and "automatic".

  If these services are not set to "Started" and "Automatic", please, do a right-click on the service and select "Properties".
  On the window properties, please change the startup type to automatic, and use the Start button to start the service.

  Click on apply, click ok.

  Close the Services window

  Restart the computer and check if the problem occurs again.

  If the problem persists, start your computer in safe mode and try to do a restore of the system again. Temporarily disable your anti-virus protection

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  I hope this helps
  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My optical drive is not displayed in "Device Manager" the eject button does not work

  Latitude Dell with Windows 7

  My optical drive does not show in the "Device Manager", the eject button does not work - I can only eject through the pin hole.

  This means that the drivers are missing or that the disc is broken?

  I tried to restart.

  Thanks in advance

  Dave Roberts

  Original title: Reader in mind windows 7

  Its possible the drive has failed. Is this an internal or an external drive? In both cases, make sure that all cables are properly connected and functional, including the power cables. If its a USB external drive then try another USB port.

  But, assuming that you tried to update the drivers (get the latest compatible drivers on the manufacturers for your brand/model/OS(32/64 bit) PC support site and install to see if that helps - first set a system restore point)) and then see if this MS article helps - https://support.microsoft.com/en-us/mats/cd_dvd_drive_problems?wa=wsignin1.0

• Video tutorial of Danielle Beaumont 'Add sensitive to the master page items' is not working properly. Adobe can address?  Or, please can someone help me?

  Video tutorial of Danielle Beaumont 'Add sensitive to the master page items' is not working properly. Now I'm stuck with the "Pigeon" - site and I do not know. can someone help me?

  Hello

  I don't know why he's not working on your side, because I am to play the tutorial in all browsers, however, I would suggest you to please try to delete the cache of your browser.

  And also to change your network if you are connected to a wifi.

  If none of them works, please try to uninstall the flash player and put it back, once the browser will ask you to do.

  Kind regards

  _Ankush

• I try to install the update of PS CS6 can read files camera raw Nikon D800.  The exe file fails and says trying to install the application manager.  I did it and the update still does not work.  Now what?

  I try to install the update of PS CS6 can read files camera raw Nikon D800.  The exe file fails and says trying to install the application manager.  I did it and the update still does not work.  Now what?

  update by downloading the files directly and then apply them: http://www.adobe.com/downloads/updates/

  If this fails, attach a screenshot of the error message if it is in English.  otherwise, quote it.

• Shared services and the workspace URL do not work in the EPM 11.1.2.2 system

  Hello
  Shared services and the workspace URL do not work in the EPM 11.1.2.2 system
  I installed the EPM V11.1.2.2 system in the single server environment (MS 2008 Server R2) with the following components:
  * Foundation Services
  * HFM
  * FDM
  
  Have used embedded Weblogic server as a web application server and Oracle HTTP server as a web server. The installation was successful.
  During configuration.
  (1) I selected the option to deploy applications web SSP and workspace to a single managed server. Applications deployed successfully at EPMServer0.
  (2) in addition, I have selected to configure Oracle HTTP server as a web server.
  These two steps were successful.
  
  But shared services and the workspace URL do not work. We get a 404 error.
  Shared services: http://inmum01hyp05.internal.vodafone.com:19000/interop/index.jsp
  Workspace: http://inmum01hyp05.internal.vodafone.com:19000 / workspace /.
  
  When I checked the EPMServer0, Weblogic administration console is in SHUTDOWN State, tried to start it but it goes by State ADMIN instead of RACING.
  Checked the newspaper EPMServer0 to 'D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs' and found the error at the end of this message.
  
  Can someone please suggest a solution for this.
  
  # < 6 June 2013 11:43:20 IST > < emergency > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499200246 > < BEA-149259 > < server 'EPMServer0' 'EPMServer' is high in the State of the administration due to the failure of the deployments. >
  # < 6 June 2013 11:43:20 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499200902 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceHttps for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201090 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceJms for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201090 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseService for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201106 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceSoap12Jms for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201121 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceSoap12 for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebService > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201121 > < BEA-220103 > < asynchronous web service support is not fully configured. The response of async web service /AsyncResponseServiceSoap12Https for this server was deployed not entirely because the queue JMS reliability was not defined/deployed: weblogic.wsee.DefaultQueue. Periodically, the server either completing the deployment for the service. Usually, this message can be ignored unless there are asynchronous web service applications. To completely disable the support of web service asynchronous to avoid this message, set - Dweblogic.wsee.skip.async.response = true. >
  # < 6 June 2013 11:43:21 IST > < Info > < WebLogicServer > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201137 > < BEA-000256 > < Invoking weblogic.transaction.internal.StartupClass.main (null) >
  # < 6 June 2013 11:43:21 IST > < Info > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201168 > < BEA-149059 > < dms.war request DMS Module [Version = 11.1.1.1.0] changes from STATE_PREPARED to STATE_ADMIN on the EPMServer0 server. >
  # < 6 June 2013 11:43:21 IST > < Info > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499201168 > < BEA-149060 > < dms.war DMS [Version = 11.1.1.1.0] request Module successfully go from STATE_PREPARED to STATE_ADMIN on server EPMServer0. >
  # < 6 June 2013 11:43:22 IST > < Info > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499202402 > < BEA-149059 > < inspection.wsil STATE_PREPARED request Module, wsil-wls is transition to the STATE_ADMIN on the EPMServer0 server. >
  # < 6 June 2013 11:43:22 IST > < Info > < hats > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000JwO7UBi7e5V5u35EiX1Hg2Xf000000 > < 1370499202402 > < BEA-149060 > < inspection.wsil request Module wsil-wls successfully moved from STATE_PREPARED to STATE_ADMIN on the EPMServer0 server. >
  # < 6 June 2013 11:44:13 IST > < Info > < Diagnostics > < INMUM01HYP05 > < EPMServer0 > < ExecuteThread [pending]: '3' for queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1370499253433 > < BEA-320000 > < Diagnostics of the subsystem initializes on the server EPMServer0. >
  
  Thanks in advance.
  TEJ

  Hi all.

  Thanks for all your useful contributions.

  Finally, the reconfiguration is successful.

  Yes John, the problem was with the deployment, but was not able to understand what goes wrong with the deployment.

  Tried to uninstall clean twice with the deletion of registry. Last updated variable of path by removing all entries related to Hyperion during the uninstall.

  Installation and configuration was successful after that. In addition, I did not compact deployment this time and used separate web servers to the deployment.

  Finally, Shared Services and the workspace URL work correctly.

  http://servername:28080/Interop/index.jsp

  http://servername:28080 / workspace /.

  Kind regards

  TEJ B

• my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

  my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Step 1

  VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

  Step 2

  When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Step 3

  In the LaunchDaemons folder, there may be one or more files with the name of this form:

  com Apple.something.plist

  When something is a random string, without the letters, different in each case.

  Note that the name consists of four words separated by dots. Typical examples are:

  com Apple.builins.plist

  com Apple.cereng.plist

  com Apple.nysgar.plist

  There may be one or more items with a name of the form:

  com.something.plist

  Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

  These names consist of three words separated by dots. Typical examples are:

  com.semifasciaUpd.plist

  com.ubuiling.plist

  Sometimes there are items (usually not more than one) with the name of this form:

  com.something .net - preferences.plist

  This name consists of four words (the third hyphen) separated by periods. Typical example:

  com.jangly .net - preferences.plist

  Drag all items in the basket. You may be prompted for administrator login password.

  Restart the computer and empty the trash.

  Examples of legitimate files located in the same folder:

  com.apple.FinalCutServer.fcsvr_ldsd.plist

  com Apple.Installer.osmessagetracing.plist

  com Apple.Qmaster.qmasterd.plist

  com Apple.aelwriter.plist

  com Apple.SERVERD.plist

  com Tether.plist

  The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

  Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

  If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

  Step 4

  Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  Step 5

  The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

  Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

  Step 6

  This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

• I have a Hp and the micro build does not work how to fix this?

  Can someone help me please? I have a HP T5800 and the micro build does not work how can I solve this problem?

  Hello

  Check with HP, their drivers support and documentation online and ask in the forums about known issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ========

  It's probably the pilots who are responsible and who may not really be later or they need to be
  re-installed anyway. The best way is to manually review using the methods below.

  References to Vista also apply to Windows 7.
  
  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek High
  Audio definition (this is an example and you can have an other name/maker).

  Write the description and the model double click on it - tab drivers - write down
  Version. Now click on update drivers who cannot do anything as MS is far behind certifying
  drivers. Then CLICK RIGHT on it and UNINSTALL - REBOOT - this will rebuild the driver
  stack.

  You can have the default windows or a former certified pilot and it's all or part of the
  issue.

  Now, go to the site of the manufacturer of the system and get the latest Audio/Sound drivers - download - SAVE - go to
  where you put - right-click on Reboot - RUN AS ADMIN-

  Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
  and then install the latest version. Restart and check after each test, not
  rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
  installed shows upward on the tab of the driver.
  
  Go to the site of the manufacturer of the device, and then search for the even more recent drivers and install repeat
  operating mode. Download - SAVE - go to where you put them - click on - RUN AS
  ADMIN - Reboot

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (updated drivers manually using the methods above is)
  to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check see the
  Disconnected devices and show disabled devices - check your micro - highlight
  then on lower right properties. Make sure that the appropriate injector is selected and check
  other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  The volume of the audio recorded by sound recorder in Windows Vista or in Windows 7 is less than
  in Windows XP (or Vista)
  http://support.Microsoft.com/kb/973446

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Clean install of Windows 7 but the activation key does not work

  Hello, enter a new installation of Windows 7, the first OS on a new construction of the mine.

  The problem I have is that the activation key will not work, the problem would be
  I use a Windows 7 (updated for Win Vista)? Or do I need a new
  product key?
  Thank you
  Eric

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us
  ----------------------