Manager of the assignment compared to custom entities

Similar Questions

• Steps to install and configure Node Manager on the local machine and remote

  Hello
  
  I'm using WLS 10.3 on Windows.
  I did the following till now.
  
  (1) installed WebLogic 10.3 on one machine (local computer, on which I created the field and my Server Admin is under execution. 1 managed server is also created on this machine).
  (2) installed WebLogic 10.3 on computer B (remote computer, which Managed Server 2 will be created).
  (3) on the machine, I used the Setup Wizard and create a domain. When creating the domain, I did the following:
  (i) created two managed servers.
  (II) create a cluster
  (III) the servers assigned to regroup.
  (IV) created two machines.
  (v) the servers assigned to machines (Admin Server and MS_1 to the machine and MS_2 machine B).
  
  (4) start Admin Server.
  (5) on the administration Console, I made some configurations for the node Manager on Machines-> Machine A-> Node Manager. The assigned values:
  (i) type (SSL)
  (II) Address (ip_address machine A) listen
  (III) listening port (5556)
  (6) in the same way it did for Machine B.
  
  So far, phsically the managed server (MS_2) directory and configuration is not there on the Machine B (its only configured on A computer because I created the field on computer A).
  
  I went through the documents on the Node Manager and found what to configure. But I have not found what is the sequence of configuration.
  
  Please let me know the sequence of steps I must follow to install and configure the Manager of nodes on the local and remote machine. I want to use Java Node Manager (not the Script node Manager).
  
  Thank you
  
  Sanjay

  Hello Sanjay

  Basically if I understand your question, you have A machine where you had installed ""(permet de supposer admin serveur) and "VAS_MS1_A VAS_ADM_A" (lets assume the managed server.» And on the second machine B you want to create a managed server 'VAS_MS2_B' which must be controlled by node manager, so that you can start console, auto restart the managed server and perform other activities such as the migration of servers using nodemanager. If this is correct, this is the sequence of steps.

  Since you say you are on windows, I start from the principle

  WebLogic version 10'3
  BEA_HOME:-c:\bea
  WL_HOME:-C:\bea\wlserver_10.3
  DOMAIN_DIR:-c:\VASDomains

  Machine has

  (1) install the BEA.
  Using 2 Setup Wizard) create the domain under "c:\VASDomains".
  (3) to start the Admin Server and connect to the console and create two machines "Machine_A" and "Machine_B". Select the types of machines as 'other '.
  (4) once machines are created go to each machine and go to the tab 'NodeManager' and enter the details nodemanager.
  (5) create server 'VAS_MS1_A' and 'VAS_MS2_B '. Enter the respective details. To "VAS_MS1_A", enter a machine name of host or ip and machine "Machine_A" and "VAS_MS2_B", enter the hostname of the machine B or ip and machine 'Machine_B '.

  Machine B

  (1) on this machine install BEA
  (2) then you have to register the machine with the Manager of nodes. So for this first set the environment go to "C:\bea\wlserver_10.3\server\bin" and run "setWLSEnv.cmd". Then type 'java weblogic. Enter the WLST", once you run this command at the next prompt Details ' connect ('', 'adminserverpassword','t3: / / adminserver:port" ")
  (3) then run this command.
  nmEnroll('c:/VASDomains','C:\bea\wlserver_10.3\common\nodemanager')

  Orders above fits machine with nodemanager. The first parameter is "domestic field", now if you see "c:\". ' directory 'VASDomains' will be created. Second parameter is nodemanager House, now if you go into nodemanager houses that some properties will be updated.
  (4) If this node Manager runs on this computer, kill that one and restart the node Manager again.
  (5) now if you go to "Adminconsole--> Machines--> Machine_B--> Monitoring" you can see the status as accessible.
  (6) now you can go "Servers--> VAS_MS2_B--> Control" and start the server. Newspapers to see how the server gets up the tail.

  If you want more details on "nodemanager", dedicated to my 'vasweblogic.blogspot.com' blog, not a lot of messages but post nodemanager can help you.

  I hope that's what you're looking for, have a nice day.

  Naour Vijay.

• Evaluation period for the stage of field custom object compare?

  I've never used an evaluation period during a stage of field of the custom object to compare on the canvas of the campaign and I want to confirm that she will be as I wait for him.

  We have a campaign that will send an email in nine batches, each a week after previous. I have a custom object with a field that contains the batch number (1-9) and I put nine steps to compare items customized on the canvas. The first checks to see if batch = 1, the second batch = 2, etc. I added a trial period of 7 days for the first eight steps. After I activated the campaign, I would expect all flow into the first stage of the decision and all those whose lot = 1 will immediately proceed to the stage of e-mail and the rest will wait seven days before moving on to the second decision, where everyone with batch = 2 will be moved to the stage left and e-mail everyone will wait for more than seven days, etc.

  I want to just make sure that this will be similar to, say, the Email step click on decision given that the data in the custom object will not change during the evaluation period, as it can to the other stages of decisions. And I don't want to accidentally send all nine lots at a time.

  Thank you.

  Hi Rob,

  This could work, as the Yes path would fire instantly and without the path would check during the evaluation period. Is there a reason to not only use a delay of a week between each stage of the decision well? A little more crowded, but perhaps more clearly during the audit of the canvas to the wire without having to enter each stage?

  See you soon,.

  Phil

• When the Manager of the custom function in a configuration of link file gets error?

  The question she get error when the Manager of the custom function in a config file in the plan to include the link.
  When she went to join the custom function Manager in the debugger, everything is OK.
  
  <? XML version = "1.0" encoding = "utf-8"? >
  < configuration >
  < custom function platform = "DotNet".
  library-path="G:\RB1\Include\CustomFunctions.dll".
  Class="Viking.CustomFunctions.CustomFunctions"/ >
  < / configuration >
  
  THS, category and path is correct.
  So is there any problem for < custom function platform = "DotNet"?
  
  OPA version 10.2
  
  OPA error message translated from the Germany into English: Exception has been thrown by the target of a call

  In general, you should not give the full path of the custom function, it should be rather in relation to the project include file.

  for example:
  

  and then make sure that the CustomFunctions.dll file is copied into the project folder until the project is built.

  In addition, if you use 10.2 for a new project, the mechanism that you use is now replaced. An extension of the custom function is the new thing, and it will look much nicer when it is used in the rules. Refer to the section 'Write a Custom function Extension' in aid of developer for more information.

• Approvers on the approval step relief custom / query

  Hello experts,

  I ran into a problem when you create a custom query for an approval step on a workflow application. When I assign approvers relief on request STANDARD (for example, the Manager of the recipient) and approval step is not no matter what approvers based on the query, the approvers of rescue are showing correctly and demand goes to the approvers of relief role. However, when I try to do the same to a custom query, approval step shows no approving relief and the workflow is interrupted.

  I compared OOTB a single approval procedure custom and see no difference, both have only one query and both work when some users match the query. But when no user is the emergency request approvers only work for OOTB application.

  All the world experiences anything like this in v 7.0.1? Is this a bug?

  Thank you

  Sergei

  Markus,

  Thank you for your response, I managed to solve the problem, the custom query that we used was a blank line, then it was never going to the approvers help at all.

  Thank you

  Sergei

• I'm really angry at the attitude of Motorola customer support

  I'm really angry at the attitude of Motorola customer support

  I'm sorry to hear that. It is a community of support-to-peer. If you need help, by a representative of Motorola, you can visit http://www.motorola.com/support

  Mark

  Support Forums Manager

• (Redirected) The worst experience with customer

  I've been buying Dell computers among more than 15 years for me and help my friends for more than 15 years.  I would say that I've spent more than $20 K with them.  The most recent experience I had with Dell is the worst and I will no longer consider them as a source.  Here is a chronology of the events:

  11 August 2014: place an order for the laptop computer Inspiron 17R for a customer.

  August 14, 2014: received the laptop.  I tried to turn on the laptop.  It feeds for 5 seconds and stops (not "Dell" screen).  I checked all cables power, power supply and plug different.  I was very disappointed because the customer needs of the computer by the weekend.

  August 15, 2014: at 10:00, I called Dell to try and get a replacement via 800-822-8965 computer.  Dell said that they need the computer in front of me to help diagnose the problem.  I told them that this computer does not stay on.  They indicated that they me to run the installation program and a diagnostic problem.  I told them not possible because the computer does not stay on.  I said at this point, I want to send it to dell and have dell ship me a new.  They asked me to call 800-624-9896.  After you dial the #, they said they can't help me and asked me to call the # original (800-822-8965).  I have re-made the original # and they after me in good number of different departments, I need to call another # (800-624-9896).  I called the # asked and they have sent me everywhere in places (and repeating the problem each time).  He is now 6 hours later.  I retried the # more later in the evening and give all the information.  At this stage, they said that according to the information I gave them, it is not a Dell computer.  I said "(pas possible-j'ai obtenu l'ordinateur par l'intermédiaire de dell.com, a reçu avec un dell boîte avec l'ordinateur a un logo dell)."  I insisted to speak to a Manager.  Roy's came on the line and said that I can call 800-695-8133 day and next call and they would take care of her.

  August 16, 2014.  At 10:00, I called 800-695-8133, and they said that, because I want to exchange the phone, I need to call 800-822-8965 and they will refer me to a special division to have my computer fixed and that they are available during business hours only.

  At this point, I'm a bit fed up!  Why don't dell.com help me when I call during business hours to resolve the issue and rather me directions in all directions.  At this point, I want dell to take the laptop and give back me the money.  I will NEVER buy another computer from the new.

  Hi blee123,

  I'm sorry that you are having so many problems.

  Please repost this in the forum to support customer care.

  http://en.community.Dell.com/support-forums/customercare/

• Not able to see the fields within a custom resources optimization

  Hi all

  I am not able to see the fields within a custom value.

  Here is my code for the custom resource optimization:

  public class CustomContentContainer extends VerticalFieldManager{
  
      String content_header;
      int container_height;
      int displayWidth = Display.getWidth();
      int displayHeight = Display.getHeight();
  
      public CustomContentContainer(String content_header,int height){
          super(Manager.NO_VERTICAL_SCROLL | Manager.NO_HORIZONTAL_SCROLL);
          this.content_header = content_header;
          container_height = displayHeight-height;
      }
  
      protected void sublayout(int maxWidth, int maxHeight) {
          super.sublayout(maxWidth, container_height);
          setExtent(maxWidth,container_height);
      };
  
      protected void paint(Graphics graphics)
      {
          int X_POS = 20;
          int Y_POS = 20;
  
          int width = displayWidth;
          int height=container_height;
          int[] xPts = {0, width, width, 0};
          int[] yPts = {0, 0, height, height};
          int[] colors = { 0xffffff, 0xf7f7f6, 0xd4d0cc, 0xb0a9a2 };
          graphics.drawShadedFilledPath(xPts, yPts, null, colors, null);
  
          graphics.setColor(0xc0c0c0);
          graphics.drawRoundRect(X_POS, Y_POS, getWidth()-40, container_height-40, 10,10);
  
          int stringWidth = getFont().getAdvance(content_header);
          graphics.setColor(0xF8F8F8);
  
          graphics.fillRect(35, 5, stringWidth+10, 30);
  
          graphics.setColor(0xFF0000);
          graphics.drawText(content_header, 40, 5);
      };
  
  }
  

  Here is the Code inside the class from the main screen

  settingsContainer = new CustomContentContainer("Settings",vodavaultLogo.getHeight());
          contentContainer = new VerticalFieldManager(Manager.VERTICAL_SCROLL|USE_ALL_WIDTH);
  
          passwd1 = new CustomEditField();
          passwd2 = new CustomEditField();
          contentContainer.add(passwd1);
          contentContainer.add(passwd2);
          contentContainer.setMargin(35,35,35,35);
  
          mainContainer.add(vodavaultLogoField);
          settingsContainer.add(contentContainer);
          mainContainer.add(settingsContainer);
          add(mainContainer);
  

  You must call the super.paint (.) in your paint (...) optimization of resources, if you paint all areas which are added.

• Is it possible to generate scripts the assignment of drive letters, such as the computer will remember each reader the same way with every new beginning?

  * Original title: Windows 7 - letters card readers

  I have a laptop computer when it is in a dock, it will have two hard drives connected.  It will also in most cases, a USB flash drive connected in and out of the dock.

  These discs are used for the back to the top of file transfer and I always wish to have the same assigned to them to drive letters.

  When I was with Windows XP, the computer remembered the mapping and each player has been located at the same place every time.  However, now I've upgraded to Windows 7 and is not only the computer remember the drive letter every time, it disconnects regularly readers.

  My question is: is there a way to the assignment of drive letters, such as the computer will remember each script will travel the same with every new beginning?

  I can live with it disconnect readers, but it is precisely an effort to use disk management to change the drive letter for each reader, whenever a re-start of your computer.

  Details: Dell E6510, Windows 7, Western Digital external drives (e-sata) 1 Flash drive (USB).

  You are aware that usb keys are not designed to stay connected on the start or stop, because there is a possibility of resulting corrupt file

• How to select the entity for the management of the process of HFM?

  Hi all

  I have a confusion as I know, a process allowing management to the statement my Scenerio metadata property. Now let's say I have an application with more than 800 members of the entity in the entity Dimension. Now that all entities will require to have process management, how can I decide?

  Help, please.

  Thank you

  Zitouni

  Hello. Once you enable for the scenario of all entities will require from, promotion, etc.. Process control screen allows you to apply patches to the selected entities and his descendants, so it is not difficult.

  Eric

• Update of the oracle.iam.ui.custom - dev-starter pack

  Hello

  I created a super-simple library that I added to the oracle.iam.ui.custom - dev-starter pack. However, I'm not sure how to actually deploy such things, and what do you do with regard to get things to work.

  That's what I currently have:

  -Simple class called EchoUtils that has a method named 'getPing()' - this thing returns 'PONG', and that's all, nothing else.

  -Defined the EchoUtils as a backingBean (I wish really is an applicationScoped-bean, but never min now). The configuration is simple:

  <> managed-bean

  <managed-bean-name>echoUtilsBean< /managed-bean-name>

  < managed bean class >com.vegaasen.play.adf.utils.EchoUtils< /managed bean class>

  <managed-bean-scope>backingBean< /managed-bean-scope>

  < /managed-bean>

  
  

  I tried to deploy the changes, but I'm just the following error all the time:

  
  

  javax.faces.validator.ValidatorException: oracle.adf.controller.ControllerException: ADFC-10001: failed to instantiate the class "com.vegaasen.play.adf.utils.EchoUtils".

  
  

  It matters little if I restart the entire server WebLogic, only the IOM or just to redeploy the package. The error persists throughout all my trials. So what the hell I am doing wrong? This is supposed to be so easy, so I don't understand how I can manage to screw it up .

  What about a frustrated guy named Vegard

  As my application doesn't have something special, I never saw this error message:

  .. more than 74

  Caused by: java.lang.UnsupportedClassVersionError: com/vegaasen/game/adf/utils/EchoUtils: version unsupported major.minor 51.0

  at java.lang.ClassLoader.defineClass1 (Native Method)

  at java.lang.ClassLoader.defineClassCond(ClassLoader.java:631)

  at java.lang.ClassLoader.defineClass(ClassLoader.java:615)

  at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:141)

  at weblogic.utils.classloaders.GenericClassLoader.defineClass(GenericClassLoader.java:343)

  at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:302)

  at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:270)

  ... more than 82

  .. Which explains everything. Well, then I know that there was nothing wrong with what I've done, it's just that I've compiled with jdk 1.7 stuff, when we IOM running on jdk 1.6.

  Bah.

  This error arose in the GUI when I accidentally saved my changes to the graphical interface, which was not intended. So my new question is this:

  When I try the expression builder, where will the exception logging? I can't find them anywhere :-)

  Kind regards

  Vegard

• Management of the SmartView metadata attributes

  Hi all

  I'm trying to handle attribute selection SmartView but no success yet.

  Is it still possible? I want to say is possible to change the assignment of the attribute for membresdans SmartView dim?

  BR

  Vladino

  Hello

  Unfortunately, I think they forgot implement the attribute management in Smart View

• Hi can anyone give me the number to contact customer care for the Malaysia? I bought adobe membership yesterday but am facing a host of issues since then

  I bought the subscription yesterday but a number if issues are popping up and I am unable to use any of the same

  Can someone please give me the number of Malaysia customer please

  (1) I am unable to download the creative application of clouds. It shows it as trying to connect to the server and stay like that

  (2) when I am connected and try to "manage my account" I don't get the page. It times out

  (3) I am a paying member, but in my options learning and support after I click on contact on I only get the option to ask community.

  He was very confused.

  I am very keen to speak to a customer care agent, if someone can give me the number, please

  Please contact the Support from Adobe on the Customer Contact

  Kind regards

  Hervé Khare

• Is impossible to cancel the membership of CC - customer support sent me here

  I ve gone through the support and account management page, the only option I get at the end is to post here. At what s * t way provides (not) support the customer, worse still, given the volume of complaints I've seen people with the same issues. I guess that these help inflated the number of messages in the Adobe forums...

  Can someone of the staff please cancel my membership?

  Because apparently filling the forums of junk messages as this is the only way that some clients have to do what is supposed to be 'easy': cancel their subscription. It seems that Adobe could afford a button to do this automatically with all the money they get from the subscription.

  My apologies to anyone who actually uses the forum. You have a good day.

  Hello

  Please contact via https://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  Kind regards

  Sheena

• "Tell me why I want to have a separate group for the view? -Mr. customer

  Hello, my name is Mr. Customer.  My VAR tells me I shouldn't run VMs Office through the view on the same hosts and in the same cluster as my server of virtual machines.  Now, I know that normally licenses VMware makes it easier to just buy view with ESX and vCenter, but I did not follow the rules and actually wound up overpaying some licenses. I did not violate any point of the EULA and I want technical answers, why so I can make the right decision and buy a new hardware and do the work stations my users to shine.

  Signed, Mr.Customer.

  Hello, I am of the VAR and I gave my client some reasons including: better sharing of resources, windows failure, more flexible less impact in the event of power failure, streaming and e/s memory management.  I want to hear from you guys, what do you think?  The best answers are those of our community, so we'll have em and I thank you in advance.

  I don't have the same experience as you all. I am the user as your customer. I separated into two different groups. I think that the point is the priority and dedicated resources. I would not want desktop computers in my Accounting Department (sending of junk e-mail to friends all day) using resources and slow down my accounting system, my e-mail server and important functions. Memory seems to be the first resource exhausted and can accumulate with view. In my office cluster, memory gets sucked upward, long before any amount of CPU is affected.

  At the same time, I have the idea to combine in my DR site so that they can share resources. It's really because I hope I never need this side DR of it but have some resources available for it. This would allow me to work (even if disabled) and resources for an interim period.

  I'm smaller in the sense that I don't have a server and a division of the office. I imagine that your client is not, or they would not think to combine desktop and server computers. And it would be really defined each arm pointing the finger the other problem they have at all.

  Dave