Apple TV 4 - Ethernet network problems

Similar Questions

• Satellite A300-2 TB-Ethernet network card problem

  Hi all

  I have a laptop Satellite A300-2 CT with Windows XP SP3 for a year. There is a problem in the network ethernet card, I think.

  If I connect my computer to a wireless network, all right. However, if I connect the computer to a wired network via the ethernet card, problems begin.

  A little later after the connection. 'something' is happening and my windows theme changes to "classic", plus none of the applications that uses the beginning of the soundcard NOT working. In addition, the system slows down a lot for all the one or two minutes. When I check running applications during the"slow", I see that deferred procedure calls takes a lot of time processor.

  Problem does not end with this, after that I disconnect the ethernet connection and restart my computer, the application of the wireless (Atheros) adapter takes control of wireless connections, so I can not connect wireless networks I wanted. I have to restart the computer to resolve this problem.

  I've updated the network ethernet card driver, nothing changes.

  In conclusion, I think the network ethernet card has a problem and maybe it is in conflict with other hardware (such as the sound card).

  Y at - it suggestions to solve this problem?

  Thank you.

  Hi alp37,

  I have never heard of this issue, and I think all you can do is update the LAN and the audio driver. The two you can download from the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  If it doesn t work I think I think it is a software problem I would recommend reinstalling Windows Toshiba recovery disc. Who can restore the factory settings, and then you can test it again.

• Ethernet network Officejet Pro L7555 printer-perfect on one but feel problems with others

  My HP Officejet Pro L7555 is connected to an ethernet network.  Two computers are on the network in the same residential group.  The printer is installed on computer A (I-5 with Win 7 Pro) files downtloaded the HP support assistance.  It is shared with computer B (I-3 with Win 7 Home).  The printer works perfectly with A computer, which gives a perfect page test, but on computer B, it will print only a small portion of the top line, true for all applications I tried to print from.

  When I try to use the HP solution on computer A Center, I receive a message that the installation is not complete.

  The Scan doesn't work at all, showing no connection when used with Windows Fax & Scan, but then I could never run early on with my old Windows XP computers, and all attempts to download updates for the older systems failed.

  Print clues about how to solve the problem would be greatly appreciated.

  J_A_K

  8Lives,

  Just a note to say thanks for hanging with me and driving me to an exceptional result.  The printer work from now on, the two computers and not only as a printer, but as a fully functional all-in-one.  He has never worked this way before, mode scan fax or computer.

  I hope that my questions has not caused too much eye-rolling on your part.  Be accomplished without your knowledge, this never could clear and excellent help.  I especially appreciate timely responses, you have done throughout this process.

  Kind regards

  J_A_K

• Airport network problem

  Today I started having problems with my home network that worked for a couple of years now without any problems. The network is based on a 5th Gen Time capsule as the main with a router number of secondary devices providing a roaming throughout my home network that is to say a 2nd Time Capsule Gen, 2nd Gen Airport Express and 1 st Gen Airport Express all connected by ethernet. The problem my wife initially reported that its Macbook Air was not connected to the internet. When I used the Airport utility to see what is going on he has reported that all secondary devices cannot be found. At the same time, I found that my MacBook and our iPhones and an iPad where no connection to our wifi. I said to THE forget secondary devices and then tried to switch the power to them to see if they would then appear in Airport utility, but without success. If I turn on secondary devices that they do not appear in UA. If I try to use configure other... in UA to access secondary devices it does not appear to be able to communicate with them.

  I don't know if it's relevant or not, but I remember that, on 21 August, I discovered that Time Machine did not all backups since 15 August and I restarted the primary time capsule by activating / deactivating the power. Since then, Time Machine seems to work very well.

  The main time Capsule is set to use back to my Mac.

  Any advice would be much appreciated.

  Apple has had some recent problems with Back to My Mac, which seem to have been resolved, but still there may be consequences.

  For now, please turn off Back to My Mac on the Time Capsule and let all other airports shut down.

  Check that devices can connect to the Capsule of time properly, and that backups are properly trigger.

  Once it's done... and assuming that the devices can connect at the same time Capsule correctly... Turn on only other airports and check to see if the devices can connect to the airport "extended" and also if it will appear in AirPort Utility.

  If so, then start another airport and test the same way.  Continue to turn on airports and tests as you go.

  If the entire network is power back up and running new and get the rear Capsule and work as well as your main Mac. Back to My Mac to reactivate and check that devices can connect to properly Time Capsule.  Then, turn the other airports, one at a time to check each of them before you turn on the other.

  However, if one of the other airports will not work properly or it does not appear in AirPort Utility, then you have to stop at this point and after return.

• Cannot download the software due to a network problem

  Hi all I'm on MacBook Pro (retina, 15 inches, end of 2013).
  I try to install Windows 10 with the version downloaded from the Microsoft Web site.
  I finished uploaded and am trying to use Boot Camp to install Windows 10.
  However, I faced a question and it is that he "cannot download the software due to a network problem".
  I'm stuck here for an hour and I can't find a solution.
  I did all right until now by the following online tutorial but it prevents me to continue.
  Any help will be appreciated.
  Thank you.

  It is a very common problem. To fix this, first try to start your Mac in safe mode by following these steps-> safe mode try if your Mac does not commissioning - Apple Support

  Then, restart your Mac as usual and try to download the Windows support software again.

• Ethernet network card does not show my Satellite L830 - 16H

  Hello

  Ethernet network adapter do not show my Toshiba Satellite L830 - 16H, and it can not reset it

  What can you do to restore it?

  I thank everyone

  You can try to access the BIOS (turn the unit on and press F2) and set it to default and save the changes.
  Sometimes this help

  Otherwise, it can be device LAN card problem.
  The fix can be very expensive because such port is part of the motherboard.

  I think you can try using an optional USB LAN RJ45 Ethernet adapter

• not possible to bind a variable shared via Ethernet network

  Hello!

  I have computer A and B with windows xp, sp3 and labview 8.6, professional edition. The two computers are in the ethernet network. I'd like to Exchange data between two applications of LV using shared variables. I create a shared variable (published network) on both computers.
  The problem is in the properties of shared variables not possible to bind the variable of the remote computer to the local computer. In the first step, there is even no possible to see any computer on the network. After the registration of the computer (Tools-> shared-> computer registry variable)
  I see the computer remote, but without any variable sharing.

  Do you have any idea how to solve this problem?

  Thank you for the answers.

  Hi ,

  Visit this link, maybe it can help you.

• PE2950 intermittent network problems

  Hey guys, I have a PE2950 running Windows 2008 R2. It's a (non-primary) domain controller and I'm having all sorts of problems with replication errors. I also have problems with DNS errors.

  When I log on the 2950 and run nslookup ifc.local, sometimes it comes complete with success immediately. Then if I run it again a few seconds later, it expires. I checked the reverse on both servers search areas and have the correct PTR records (it seems) and points NIC of each server to the other server, and then to his self for DNS. There are forwarders in DNS records, but not on the network card. I seem to have no problem with the PDC network (a 1950).

  It seems that my network problem is intermittent and can be hardware/driver related, but I'm not sure. One thing I found interesting is that if I try to activate IPV6 on the 2950's NIC, I receive an error message that says I need to install a network card in order to configure TCP/IP, but there is clearly a here and IP4 is set up very well.

  IPconfig shows also two cards tunnel I'm not familiar with. Clear that they are not used. I would like to disable some how?

  Here are the results of an ipconfig/all and nslookup example. Of course, when I went to this post, I couldn't nslookup to expire, but when he does I have server: UNKNOWN and IP address correct and therefore three lines of time-out.

  Thanks in advance for any help you can offer!

  Windows IP Configuration
  
     Host Name . . . . . . . . . . . . : IFCServer2
     Primary Dns Suffix  . . . . . . . : IFC.local
     Node Type . . . . . . . . . . . . : Hybrid
     IP Routing Enabled. . . . . . . . : No
     WINS Proxy Enabled. . . . . . . . : No
     DNS Suffix Search List. . . . . . : IFC.local
  
  Ethernet adapter Local Area Connection:
  
     Connection-specific DNS Suffix  . :
     Description . . . . . . . . . . . : Broadcom BCM5708C NetXtreme II GigE (NDIS VBD Client)
     Physical Address. . . . . . . . . : 00-1C-23-CF-7E-6E
     DHCP Enabled. . . . . . . . . . . : No
     Autoconfiguration Enabled . . . . : Yes
     IPv4 Address. . . . . . . . . . . : 192.168.2.11(Preferred)
     Subnet Mask . . . . . . . . . . . : 255.255.255.0
     Default Gateway . . . . . . . . . : 192.168.2.1
     DNS Servers . . . . . . . . . . . : 192.168.2.10
                                         192.168.2.11
     NetBIOS over Tcpip. . . . . . . . : Disabled
  
  Tunnel adapter isatap.{865DC311-438F-4420-9B23-0062AF1CFBE5}:
  
     Media State . . . . . . . . . . . : Media disconnected
     Connection-specific DNS Suffix  . :
     Description . . . . . . . . . . . : Microsoft ISATAP Adapter
     Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
     DHCP Enabled. . . . . . . . . . . : No
     Autoconfiguration Enabled . . . . : Yes
  
  Tunnel adapter Teredo Tunneling Pseudo-Interface:
  
     Media State . . . . . . . . . . . : Media disconnected
     Connection-specific DNS Suffix  . :
     Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
     Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
     DHCP Enabled. . . . . . . . . . . : No
     Autoconfiguration Enabled . . . . : Yes
  
  /////////////////////////////////////////////////////////////////////////////////////////////
  

  Server:  ifcserver1.ifc.local
  Address:  192.168.2.10
  
  Name:    ifc.local
  Addresses:  192.168.2.11
        192.168.2.10
  

  Is that what your firmware up-to-date?  There were several problems with these early s NICS that have been addressed through firmware updates and driver (drivers was with 2003... have not heard anything specific about 2008).  You need to update your BIOS and ESM before updated the firmware of the NETWORK adapter.

• Network problem between Windows 7 laptop with the Windows XP desktop computer via Linksys WRT54 router.

  Original title: network problem!

  How can I get my laptop with Windows 7 Home Edition to connect to my desktop with Windows XP on it. I have a router Linksys WRT54 plugged directly to the desktop via ethernet and my laptop has an excellent signal but I can't access programs or the printer with it. I know the 'host group' on 7 but XP isn't that. Are there alternative than to put 7 on my desktop? Any suggestions?

  Thank you!

  Hello

  Thanks for posting your query in Microsoft Community and we give the opportunity to help you.

  According the description of the problem face you connection problems in Windows 7 laptop with the Windows XP desktop computer via Linksys WRT54 router.

  Residential group option is available on Windows 7 and Windows 8 operating systems. However, you can see the following article for more information on the connection of Windows 7 and Windows XP computers:

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-in/Windows7/networking-home-computers-running-different-versions-of-Windows

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Network Drive will not refresh, I use 2 machines to Windows 7 Professional 64 bit and 1 Windows 7 Professional 32-bit machine on a wired Ethernet network.

  I use 2 machines to Windows 7 Professional 64 bit and 1 Windows 7 Professional 32-bit machine on a wired Ethernet network.

  The network works fine with one question. When I add a new file on the same machine and try to access this new folder from another machine the new folder does not appear. I have to disconnect the network drive of the machine with the new folder, and then map a new drive. When I map the new drive the new folder appears in Windows Explorer on the second machine.

  It's very frustrating when I want to add a file attachment to e-mail from another machine and it does not appear until I disconnect and re - map the drive.

  I hope this all make sense. Does anyone have an idea how to solve this problem? I don't remember this problem when my network was XP Pro machines.

  Thanks for your help.

  Thank you for your help.

  The I work around this problem is to do step 1 and step two, as you suggest.  I haven't restarted the computer though - I will also try it.  I have also not tell abled my ESET NOD32 Antivirus software either - I'll try that too.
  The network drive I'm seeing 'change' on does not refresh by itself, when I press F5 or go to view/update.
  Search Google indicates that this refreshing a network drive issue to show a newly created folder, etc. is a long time, Windows 7 problem.
  I would like your ideas on the potential problem of Windows 7 found on Google.
  Thanks again for your help.
  Bill

• 2 computers on an Ethernet network directly windows 8

  I want to connect to my backup PC directly without running into my router (my PC has two network adapters)

  Plenty of info out there to do this on win7 and vista, none for win8.
  I connected the 2 together and in network and sharing Center and I can see my original network and the 'network unidentified' - Public network
  Connections: ethernet.

  Hello

  Please follow the steps from the link and check that it works very well.

  Check out the link:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab2&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Someone in the building uses Apple can 790-795 network this person hack me and who is? Berlin writes. Very often, I notice that my network does not work as it should.

  Someone in the building uses Apple can 790-795 network this person hack me and who is? Berlin writes. Very often, I notice that my network does not work as it should. Thank you. I'm really not sure if it's true that Apple can´t be hackend? First because I use Google and Google mail on the same computer.

  Someone in the building uses Apple can 790-795 network this person hack me and who is?

  Wi - Fi networks will be displayed in the menu OS X Wi - Fi, including those created by other Apple routers. It's normal. It does not necessarily indicate that users connected to these networks can connect to yours. In particular, if you use a wireless password and change it often.

• According to Apple, I have a billing problem.

  ID: * @ * .com

  According to Apple, I have a billing problem.   The account you are trying to use an internet account and does not serve unless I have buy any item on the net.  This way I can keep a check on who try to soak my account.

  Please inform me what is the billing issue, as I have not did not have Apple purchases for a few months.

  John *.

  < personal information under the direction of the host >

  This is a user to user support forum, so we cannot help you with that. You need to contact apple Support to find out what the issue is:

  iTunes worldwide support

  See you soon,.

  GB

• Cannot access Ethernet network

  I have recently updated my network router and has difficulties to get things to work. My Internet is wireless (no land line). For more than 6 years, I have used with success a Netgear MBR624GU 3 G Router wireless broadband that allowed me to access the Internet as well as to support a physical Ethernet network (with other computers, printers and a Sonos music system with the iTunes library on a NAS). The Netgear router was also on the Ethernet network (all with 192.168.2.0/24 IP addresses). There is also WiFi access for iPad, etc.

  Go now my new contract LTE brought me a router Huawei Mobile WiFi E5577C. There is no Ethernet port. I managed to access the Internet through it. However, I cannot now access the Ethernet - ping reports "Request Timeout" and printers and Sonos system are not accessible. This seems strange to me, I thought of a direct access to the physical network should be easy. I tried things like turn off Wi - Fi, but who did not have Ethernet access works. I put the Ethernet network with the highest priority in the order of Service, a second Wi - Fi connection. Currently I have two Ethernet and Wi - Fi configured manually (attribution 192.168.3.0 Wi - Fi and Ethernet 192.168.2.0 IP addresses, Wi - Fi with 192.168.3.2 as router - I also tried to use DHCP but with no more success). I also tried with and without the Netgear router that is also attached to the Ether net but that doesn't seem to make a difference.

  I thought that I have perhaps need a router different with a port Ethernet (like the Netgear) but, given that I have to pay for that myself, I know whether it is the only solution before spending money.

  I guess I understood something wrongly in this configuration. If anyone can give me any advice or suggest what I might try, I'll be very grateful. If I should post more detailed data, please let me know.

  You are going to have to implement some sort of IP routing or bridging of the connected to the wireless network, or you will need to implement local areas with several connections network with separate subnets.   You might need the static routes for devices with multiple network paths, but you will need at least to have your wireline and wireless in separate subnets.   This so that your network traffic can be set via Wi - Fi to the ISP, or via cables to other local devices.

  Or get a modem that has wired and wireless.   Or one that has a cable, if you are inclined to set up and manage your own network.

  If there is the budget and the desire to run your own network...  My usual preference involves isolated for each of the main functions and including the PSI at the edge device and devices configured to a minimum.   In other words, an ISP modem device with a wired connection and a "bridge" of the ISP connection mode.   Then a box of firewall router gateway controlled locally and a distinct feature of Wi - Fi and preferably one with an access point (AP) mode.   Get your own gateway firewall services, NAT and associated box.   Keep your ISP as simple as possible.   It is more boxes at the front, but when a box crashes or when you change your ISP, you may need to change only the ISP modem.  Other devices will not need to change.   There are positives and negatives of this approach points as, for example - you also manage all the security of your network and your configuration, 'in' your network 'behind' the ISP modem.   The ISP technicians can get only in what concerns the modem and only will help you with the part of your network.

  Network Bridge: works like a piece of wire to a wired network for most of the considerations.  Transparent background for IP network traffic.

  Network router: transfers the IP traffic between two or more different IP subnets.  Very well visible for IP network traffic.

  Welcome to IP network.

• How to add the computer to the ethernet network

  For some unknown reason, a MacBook Pro than on the ethernet network home. Previously I would just plug the ethernet cable and the connection is between my Mac Pro and the laptop, but not more. What are the settings must be restored?

  If no changes were made for all the work previously to check setting on the Mac, the other end. The cable could be bad or the router/modem may have been modified. I guess that all Internet services do NOT work on the laptop.