Manipulation of table (delete the lines which are > lines after them)

Similar Questions

• I have a file Windows pop up message Protection. It is said: the files which are required for Windows to run properly have been replaced by unrecognized versions.

  Original title: Windows File Protection Pop Up Message.

  I have a file Windows pop up message Protection. It is said: the files which are required for Windows to run properly have been replaced by unrecognized versions. To maintain system stability, Windows must restore the original versions of these files. Insert your Windows XP Home Edition CD-Rom now. The problem is that I do not have this CD and need a way to solve this problem. Thank you

  Hello

  1. have you made any hardware changes or software on the computer before this problem?
  2. when exactly you receive popup?

  Run SFC scans the computer and check.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

• When I download Apps, I get a download error 'undefined '.  I followed the instructions to delete the OOBE, which did not solve the problem.

  When I download Apps, I get a download error 'undefined '.  I followed the instructions to delete the OOBE, which did not solve the problem.

  Using creative cloud | Download error in the applications tab of Creative Cloud Desktop Application

  If you have found and deleted files oobe and who could not solve the problem, check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• List of the ESX which are not in the maintenance of a cluster

  Hello

  I am the name of a cluster, but I the name of the esx which are not in a normal maintenance.

  I have a powershell command

  can you help me?

  Thank you

  Something like that

  Get-Cluster-name mycluster.

  Get-VMHost |

  Where {$_.} State - eq 'connected'} |

  Select name

  or

  Get-Cluster-name mycluster.

  Get-VMHost |

  Where {$_.} The State - only 'Maintenance'} |

  Select name

  But that last one will also list the ESXi are disconnected or NotResponding

• I have Photoshop installed on my desktop and laptop. The photo folders are synchronized between them, but I don't mean to maintain synchronized so catelogs. What folders/files I need to copy to keep items Organizer catelogs and keywords, the t

  I have Photoshop elements 14 installed on my desktop and laptop. The photo folders are synchronized between them, but I don't mean to keep synchronized and catalogs. What folders/files I need to copy to keep organizing items catalogs and keywords, tags, synchronized on the laptop and the face recognition Office?

  oliverk3402531 wrote:

  I have Photoshop elements 14 installed on my desktop and laptop. The photo folders are synchronized between them, but I don't mean to keep synchronized and catalogs. What folders/files I need to copy to keep organizing items catalogs and keywords, tags, synchronized on the laptop and the face recognition Office?

  Looking for the location of your catalog in the menu help > system information. It's all the folder containing the database file catalog.pse14db.

  It's easy to synchronize your catalog...

  But...

  Even if the media folder tree has the same structure, which does not work and all your files will be displayed as "offline" in the catalog synchronized. The reason is that the catalogue in computer stores the location of the media files by the full path AND the identification of the drive (internal serial number). The synchronized catalog will not find files on computer B.

  So, what would be your choice?

  -Store your multimedia files on an external drive and plug it alternately on both computers. No need to synchronize media files; You can even save the catalog on the external drive, no need to synchronize the catalog folder either. Downside: who does not act as a backup. You can use your sync as a simple backup to restore in the drive of origin if necessary.

  -According to John R Ellis, you can assign the same serial number for both drives.

  psedbtool (database of the elements of Photoshop tool)

  I have not tested this, but it should work.

  -The good old method of backup and restore, forgetting the 'sync' is slow, but much more secure (you have two copies over a backup). The HUGE advantage is that you can easily migrate to another computer and still another version of elements, even another OS.

  -My own solution requires some fiddling with the sqlite database and a good understanding of the structure of the database. I have syncs media and catalog or via Synctoy Windows files on an external drive. I create a copy of the catalog I have change in sqlite to point to the serial number of the external drive. The catalogue of the external drive and media are available to any computer with the same version of elements. The advantage of the 'synctoy' method is that it is much easier and faster than an incremental backup in the Organizer.

• It is Possible to reduce the space between the lines after < CR > a text block?

  Hello

  I paste text without ANY special models in my custom CSS layout.

  I would have less space between the line after a < CR >.

  see you soon,

  Dreamer101.1

  Using the following style rules

  p, {br}
  margin: 0;
  padding: 0;
  }

  and look at the result.

  I hope this helps

  Ben

• Delete the line feature in a Table with Multiselect LOV

  [Issue]

  Is it possible to add a remove function line in a Table Advancced with Multiselect LOV?

  [Reminder]

  I created a page OFA by "LOV Multiselect for Advanced of Table" according to the developer's guide.
  This is the expected behavior.

  • The values in the LOV screen have been added to the table in the main screen.
  • The values selected in the new LOV screen have been inserted to the table in the basic screen by additions.

  Then, when I have attached an icon to remove a table, it was not the expected behavior.

  • The values in the LOV screen have been added to the table in the main screen.
  • Again selected in the screen LOV values were NOT inserted into the table of the basic screen by additions.

  The deletion icon was created according to the tutorial from the OFA (Chapter 2: lessons from Core - delete)
  and here are the properties of the element.

  • customer action type: fireAction
  • form: true
  • paraemter name: target
  • parameter value: 1 (nominal value)

  Before attaching the trash icon,
  When the user select values in the LOV screen, processFormRequest method in the basic screen is executed.

  But after attaching the trash icon,
  When the user select values in the LOV screen, processFormRequest method in the basic screen is NOT executed.

  Is it possible to add a remove function line in a Table Advancced with Multiselect LOV?

  Best regards

  Eimei

  The problem was solved by changing a parameter name.

  It seems that the parameter name 'target' is used in a standard program.

• CD Rom drive not recognized of the games which are already installed.

  Hi, I have a similar problem.
  But let's start at the beginning.

  About 5 months ago, I bought a game. It did not work properly. After a month without playing, I wanted to have fun again. And here it starts.
  I clicked on the game icon and the message "' Please insert the correct dvd - rom, press OK and restart the application".» And that's all. So I tried to run every possible way, my two dvd-drivers, then I uninstalled and installed again first on one, on the second disc, but nothing new.
  The thing is, that she even download necessary patches and computer, he sees (in my computer). But every time I want to play appears this irritating message.
  Pilots celan are the disc has not yet a little dust on it.
  On my brother's computer, it works perfectly.
  My computer system is Vista, but I don't think that this has something to do with it.

  Please, please help.

  Hi Neilameane,

  Thanks for posting your questions to answers.microsoft.com

  Just to let you know, I moved your post to

  http://social.answers.Microsoft.com/forums/en-us/vistagaming/threads?page=3

  to place it as a new question on the community forum.  When has already been answered in a previous question, less than MVP and moderators will seek to these posts, so when something new happens on these positions they get very often over looked.  Sometimes just to reference the URL and post a new question will help to get good support on the question line.

  Once again, 'Thank you' for the display of answers.microsoft.com

  Article which was featured on the forum on this link;  Reset you the upper and lower filters?  A big question really to ask, does your system recognizes the other DVD/Cd?

  Here's how to reset the upper and lower filters for the DVD;

  Be sure to have a good restore point before you do the steps described in this article.

  You can follow the steps below or click on this link to go directly to the Knowledge Base article and run the FIX for this issue.

  http://support.Microsoft.com/default.aspx/KB/314060

  Fix it myself

  Important this section, method, or task contains steps that tell you how modi...
  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows
  
  This problem is due to two Windows that have been corrupted registry entries. To resolve this problem, you must use the registry editor to delete the corrupted registry entries. To use this method, you must be running Windows as an administrator. If you need help, check that you are an administrator, visit the Microsoft Web site at the following address:
  http://support.Microsoft.com/GP/Admin (http://support.microsoft.com/gp/admin)
  Back to top

  Microsoft Windows Vista

  1. Click Start
     and then click all programs.
  2. Click Accessories, and then click run.
  3. Type regedit and then click OK.
     If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  4. In the navigation pane, find and then click the following registry subkey:
     HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  5. In the right pane, click UpperFilters.
  
  Note You can also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters . If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step 8.
• On the Edit menu, click delete.
• When you are prompted to confirm the deletion, click Yes.
• In the right pane, click LowerFilters.

  Note If you do not see the LowerFilters registry entry, unfortunately this content can't help you. Go to the section "next steps" to learn how you can find more solutions or more help on the Microsoft Web site.

• On the Edit menu, click delete.
• When you are prompted to confirm the deletion, click Yes.
• Exit Registry Editor.
• Restart the computer

Please keep us informed if, in addition, help is needed.

Debbie
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

• How imp one table, delete the old data? or the deletion of the table (before)

  Suppose that: in my tcomven of the actual table, I have 15 records, guess also, I have the file: h12292008.dmp there are 27 records
  
  If I type:
  
  IMP TABLES = (tcomven) UFIERROS/linuxx fromuser = UFIERROS touser = UFIERROS file = h12292008.dmp ignore = Y
  
  show imported 27 files, I checked the table and I have 15 + 27 files = 42 Records
  
  My question:
  
  before you import the table is possible delte all the contents of the Tcomven table (note I do first with sqlpleu and or sqldeveloper) my question is exista flag custom imp?
  
  
  or:
  
  If I type (same command ignore without flag):
  
  IMP TABLES = (tcomven) UFIERROS/linuxx fromuser = UFIERROS touser = UFIERROS file = h12292008.dmp
  
  tells me an error: the object exists, same question: the imp command flag for gout have first of all the tcomven of the table (or in any case, at the head of exp e)?
  
  
  Thank you

  Your needs:

  When you use imp (old style) of command line... you must delete/truncate the table before

  If you are using expdp/impdp, there option TABLE_EXISTS_ACTION help 'TRUNCATE' table before.

  TABLE_EXISTS_ACTION Action to perform if any object already exists.

  Valid keywords: (SKIP), APPEND, REPLACE and TRUNCATE.

• Is there a way to delete the lines of separation in a comb box?

  Hello

  I have created a form that requires fields numbers (of a specific amount of characters) of a table, but I don't want the lines of separation between characters.  Is it possible that turns off?

  Thanks in advance for your help.

  p.s. I also noticed that if I copy the first field in the column of the second line, the dividing lines are not in the second row? That's what I want the first row to look like.

  Kim

  Thanks Radzmar

  When I tried to put tags in manually when I saved the xml it erased them all once again.

  That being said, I found a way to do it.  In the palette object-> cell-> :-> Appearance tab Custom--> I set the border width to zero... Who did it!

  Thanks for your help and your quick response so.

• Not able to access the PV which are deployed in the RT using the EPICS IO Server

  Hi, we have NIPXIe 8133 and 1 windows vista (32-bit) PC and I installed LabVIEW 2012 (32 bit) and the required modules. I also have another PC (6.3 Santiago RHEL) based on RedHat Linux and all 3 PCs are connected to the same network. I want to develop an application in which I want to deploy some variables of process in RT and want to access this PVs in Red Hat Linux PC. In order to develop this application, I do RT as a server of EPICS and Red Hat Linux PC as a Client of EPICS. I have deployed some variables of process using Server EPICS in RT now I want to access the value of the PVs in Red hat Linux PC and in this EPIC PC base is already installed but I am not able access PVs that are deployed in RT if you please help me solve this problem. Best regards, Ishan

  I have not assigned by default in one of my system and bridge that was the only problem in my system. Once I have given Defaullt bridge in all systems, I can access all of the HP that are deployed in the RT other 2 machines connected in network.

• Is it still possible to synchronize my calendar on my mobile devices and the computer (which are mac)

  Original title: Mail without parallel

  I bought a mac and windows is installed. Is it still possible to sync my calendar on my mobile devices and computer (which are mac) my calendar Microsoft and vice versa?

  Simply connect the two to the same calendar service, which is responsible for the synchronization between all devices.  My recommendation is Outlook.com because it supports IMAP (sync mail) and Exchange Active Sync (which can synchronize mail, more address books and calendars).

  Google Apps has also supported Exchange Active Sync.  I'm not sure icloud.  Really, you're at the mercy of your email provider in this area.  But the deal on the use of Outlook.com is that you can use as the backend without changing your email account/provider. Just install Outlook.com to connect to the e-mail service you use already today, and he will take care of the rest.

• SWF playing the layers which are grey.

  I tried to record on a swf animation.  However, for some reason, it's playing animations layers that was grayed out (which I didn't include in the swf backup).

  I don't know what is happening.  I want to just the "Walk_forward" layer to animate in the swf layer time 'Walk_forward' and not 'Walk_in_place' I could just delete the layer, but I want to save them in the same file.

  Any ideas?  Thank you

  

  File-> release-> Flash (tab)-> layers Include settings (uncheck) hidden.

• Need help in the design of the structure of the table with the lines of the query

  Hello
  
  Need to design a page
  
  ex:
  
  Select empno, emp wage; is my query and returns two columns and four rows
  
  
  the four rows should be my values in the structure of the table.
  
  
  EmpNo - salary
  ---------------------
  1 - 1000
  -----------------------
  2 - 2000
  ------------------------
  3 - 3000
  ----------------------
  4 - 4000
  
  
  
  
  Kind regards
  
  Krishna

  Hello

  One of the ways is to create 2 RowLayouts dynamically like this

  Row1-> Cell1--> HeaderRegion--> StaticStyleText (EMPNO attribute)
  Row2-> Cell1--> StaticStyleText (EMPNO attribute) Cell2--> StaticStyleText (SALARYattribute)

  and iterate this code for all the lines of the vo.

  Kind regards
  Mukesh Uchaniya

• How to remove or delete the line in a string indicator?

  I have a string indicator that receives data continuously. If the number of rows in the indicator becomes 100 then receives a new line after the very 1st line 100 line will be removed and so forth... in simple terms, I need to keep only the last/final 100 lines received in the indicator. How can I do this? Kindly help me.

  Hello

  Please find the attached snapshot.

  Hope this helps

  Concerning

  David