SWF playing the layers which are grey.

Similar Questions

• I have a file Windows pop up message Protection. It is said: the files which are required for Windows to run properly have been replaced by unrecognized versions.

  Original title: Windows File Protection Pop Up Message.

  I have a file Windows pop up message Protection. It is said: the files which are required for Windows to run properly have been replaced by unrecognized versions. To maintain system stability, Windows must restore the original versions of these files. Insert your Windows XP Home Edition CD-Rom now. The problem is that I do not have this CD and need a way to solve this problem. Thank you

  Hello

  1. have you made any hardware changes or software on the computer before this problem?
  2. when exactly you receive popup?

  Run SFC scans the computer and check.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

• How can I play the songs that are in the format of .wma on my PC using my Desktop 4.0.9.17 Windows XP iTunes app?

  How can I play the songs that are in the format of .wma on my PC using my Desktop 4.0.9.17 Windows XP iTunes app?

  Thank you
  RS

  Hello Ristrawn,

  Thank you for your message.  There is no way to play .wma in the iTunes player.  You will need to find a 3rd party software to convert .wma to .mp3 files.  From there, you would be able to listen to the MP3 in the iTunes player.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• List of the ESX which are not in the maintenance of a cluster

  Hello

  I am the name of a cluster, but I the name of the esx which are not in a normal maintenance.

  I have a powershell command

  can you help me?

  Thank you

  Something like that

  Get-Cluster-name mycluster.

  Get-VMHost |

  Where {$_.} State - eq 'connected'} |

  Select name

  or

  Get-Cluster-name mycluster.

  Get-VMHost |

  Where {$_.} The State - only 'Maintenance'} |

  Select name

  But that last one will also list the ESXi are disconnected or NotResponding

• Not able to access the PV which are deployed in the RT using the EPICS IO Server

  Hi, we have NIPXIe 8133 and 1 windows vista (32-bit) PC and I installed LabVIEW 2012 (32 bit) and the required modules. I also have another PC (6.3 Santiago RHEL) based on RedHat Linux and all 3 PCs are connected to the same network. I want to develop an application in which I want to deploy some variables of process in RT and want to access this PVs in Red Hat Linux PC. In order to develop this application, I do RT as a server of EPICS and Red Hat Linux PC as a Client of EPICS. I have deployed some variables of process using Server EPICS in RT now I want to access the value of the PVs in Red hat Linux PC and in this EPIC PC base is already installed but I am not able access PVs that are deployed in RT if you please help me solve this problem. Best regards, Ishan

  I have not assigned by default in one of my system and bridge that was the only problem in my system. Once I have given Defaullt bridge in all systems, I can access all of the HP that are deployed in the RT other 2 machines connected in network.

• I have toshiba laptop that missed my virus protection and my laptop a week ago has changed for the windows Classic theme, all the other themes are greyed out so you cannot select them,

  I have toshiba laptop missed my virus protection and my laptop a week ago has changed for the windows Classic theme, all other themes are greyed out so you cannot select them, my internet has also stoped working, I also can't do a system restore as it says it does not work any body can help me please?

  My laptop will also not me do a backup.

  Try these:
  METHOD 1:
  Back up all the files on a USB Flash drive or an external hard drive and re - install Windows on the hard disk of laptop.
  -------------------------------------------------------------
  METHOD 2:

  Try partitioning your hard drive and put your files there.

  1. Start menu search: 'drive '.
  2. click on create and format hard disk partitions
  3 right-click the Local Disk (C) and select shrink.
  4. According to the size of the files, we could save, choose the size you want to reduce (1000 MB = 1 GB)
  5. right click on the new "unallocated space" and create the Partition. (Name it BACKUP or something)
  6. place all your important files on the new partition, and then, when you reinstall Windows, select the Local Disk (C)
  DO NOT select the Partition you you saved on files.
  Hope that these answers are useful.

• Is it still possible to synchronize my calendar on my mobile devices and the computer (which are mac)

  Original title: Mail without parallel

  I bought a mac and windows is installed. Is it still possible to sync my calendar on my mobile devices and computer (which are mac) my calendar Microsoft and vice versa?

  Simply connect the two to the same calendar service, which is responsible for the synchronization between all devices.  My recommendation is Outlook.com because it supports IMAP (sync mail) and Exchange Active Sync (which can synchronize mail, more address books and calendars).

  Google Apps has also supported Exchange Active Sync.  I'm not sure icloud.  Really, you're at the mercy of your email provider in this area.  But the deal on the use of Outlook.com is that you can use as the backend without changing your email account/provider. Just install Outlook.com to connect to the e-mail service you use already today, and he will take care of the rest.

• Just installed Acrobat XI and many of the tool buttons are greyed out.

  This is Acrobat Standard.  Why would the edit buttons be grayed out?

  Lee

  It is possible that the document you are editing does not allow for edition, which could be due to security restrictions that are in place, because it is a form created in LiveCycle Designer spirit, it is locked due to a digital signature, etc. See what it shows when you select: file > properties > Security

• I am trying to create a VPN connection, but when I get to the step that allows me to create the VPN, the radial buttons are greyed out.

  I am trying to create a VPN connection, but when I get to the step that allows me to create the VPN, the radial buttons are grayed out, it is a Windows component is missing and does not allow me to create VPN. I am running Windows XP Home addition. I recently got a Malware attack and had the quarantine and fix trojen attempts. After the restoration, I found that my previous VPN connection was broken. When I tried to add a new connection, I'm stuck on the screen connection virtual network in the the radial button private network connection wizard is grayed out, he could not check.

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows XP TechNet forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

• CD Rom drive not recognized of the games which are already installed.

  Hi, I have a similar problem.
  But let's start at the beginning.

  About 5 months ago, I bought a game. It did not work properly. After a month without playing, I wanted to have fun again. And here it starts.
  I clicked on the game icon and the message "' Please insert the correct dvd - rom, press OK and restart the application".» And that's all. So I tried to run every possible way, my two dvd-drivers, then I uninstalled and installed again first on one, on the second disc, but nothing new.
  The thing is, that she even download necessary patches and computer, he sees (in my computer). But every time I want to play appears this irritating message.
  Pilots celan are the disc has not yet a little dust on it.
  On my brother's computer, it works perfectly.
  My computer system is Vista, but I don't think that this has something to do with it.

  Please, please help.

  Hi Neilameane,

  Thanks for posting your questions to answers.microsoft.com

  Just to let you know, I moved your post to

  http://social.answers.Microsoft.com/forums/en-us/vistagaming/threads?page=3

  to place it as a new question on the community forum.  When has already been answered in a previous question, less than MVP and moderators will seek to these posts, so when something new happens on these positions they get very often over looked.  Sometimes just to reference the URL and post a new question will help to get good support on the question line.

  Once again, 'Thank you' for the display of answers.microsoft.com

  Article which was featured on the forum on this link;  Reset you the upper and lower filters?  A big question really to ask, does your system recognizes the other DVD/Cd?

  Here's how to reset the upper and lower filters for the DVD;

  Be sure to have a good restore point before you do the steps described in this article.

  You can follow the steps below or click on this link to go directly to the Knowledge Base article and run the FIX for this issue.

  http://support.Microsoft.com/default.aspx/KB/314060

  Fix it myself

  Important this section, method, or task contains steps that tell you how modi...
  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows
  
  This problem is due to two Windows that have been corrupted registry entries. To resolve this problem, you must use the registry editor to delete the corrupted registry entries. To use this method, you must be running Windows as an administrator. If you need help, check that you are an administrator, visit the Microsoft Web site at the following address:
  http://support.Microsoft.com/GP/Admin (http://support.microsoft.com/gp/admin)
  Back to top

  Microsoft Windows Vista

  1. Click Start
     and then click all programs.
  2. Click Accessories, and then click run.
  3. Type regedit and then click OK.
     If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  4. In the navigation pane, find and then click the following registry subkey:
     HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  5. In the right pane, click UpperFilters.
  
  Note You can also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters . If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step 8.
• On the Edit menu, click delete.
• When you are prompted to confirm the deletion, click Yes.
• In the right pane, click LowerFilters.

  Note If you do not see the LowerFilters registry entry, unfortunately this content can't help you. Go to the section "next steps" to learn how you can find more solutions or more help on the Microsoft Web site.

• On the Edit menu, click delete.
• When you are prompted to confirm the deletion, click Yes.
• Exit Registry Editor.
• Restart the computer

Please keep us informed if, in addition, help is needed.

Debbie
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

• Update of the statutes, which are not in a collection does not work

  Y does it have to consider if I want to change the content of an article, which is not in a particular collection?

  There is a link from a normal (in collection) article to this article (not in collection).

  I exported a new .article file, updated on the portal, he has published once again and saved the Preview button.

  Was it something wrong?

  I checked with the team and, unfortunately, you are right there is no way to update an article that is not a collection on any one of the three platforms. The only way she'll get an update is when it is removed from the device when clean us up to make room for the new downloaded content.

  Neil

• BUG: The layers that are disabled appear in published pages

  Layers that have visibility turned off in the timeline always appear in the published page.

  In addition, these layers were keyframes, which means they stayed on all the time once they have been instantiated.

  Does NOT appear in the program, it appears in the publication. Drove me crazy, and should be considered a bug in the program, because the power off of visibility must be in the software and the published page.

  -Ian

  Hi, EGC -.

  Well, it's the visibility on the scene, not the CSS visibility setting.  In order to define the CSS parameter, you must change the property in the properties panel.  This will place an alley in the panel mounting that says 'View' and will do what you want.

  

  Hope that helps,

  -Elaine

• Manipulation of table (delete the lines which are > lines after them)

  I have a table of entry I want to manipulate.

  We measure a rotation device.  In the measurement sequence we want to display the data on a slope that is constantly growing, although when we let off the coast of the acceleration of our mobile device at the end of the test, we end up with a higher torque #s at the beginning of the sequence of RPM... which blurs our line of slope on our chart.

  For example, see the PNG attached on the table of torque/RPM torque.  I need to be able to cut the 2 first lines of the table that we need go less and more general in the line of torque sequence.  Throughout the test, we have a number of line 10 for example couple that is greater than the value of torque on line 11, so that we would need to cut the value of torque in line 10.

  I have attached the vi sub that I plugged in order to try it, but can't make it work.   I don't have to sort the table, but to remove the lines that exceed the lines after them... relatively to the value of rpm decreases constantly.  If I have a pair of value 2340/1869 in the row 1 & 276/1839 in row 2, I need rank 1 deleted.  But if I have a pair of value of 2509/1704 in row 12 & a pair value of 2493/1689 in the 13th row, I don't want to let the value of torque in (if possible) because it is a realistic appearance of the torque curve captured during the sweep of the power of the test.

  Any ideas?

  ready!

• I have Microsoft vista, a dell inspiron 530 desktop computer and need to remove the specific .dll files from the registry which are files of Trojan horses. How can I do this?

  I found some information online to open my computer in safe mode, type regedit in the start menu and then double-click HKEY_LOCAL_MACHINE > SYSTEM > CurrentControlSet n to locate and eliminate the malware file name. Everything was fine until the part of filename to locate because no file name appeared

  Hello

  Unless you know exactly what you do, in any case you are to change your registry database.

  This can make your operating system unusable.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  See you soon.

• The search in Windows Explorer has stopped working properly - it does not find the files which are there, but will find other files that match the search criteria

  Window 7

  Was working before, but have only allowed a number of updates to Windows that had been blocked for a while.

  For example. Type 'safe' in the search box. It finds files and directories with 'security' in the title, but not the files and directories that I can see are there with 'safe' in the title.

  When I search using the "safe * ' it seems to do exactly the same thing as"safe ".  It does not show only files beginning with 'safe'

  My suggestion was not ' safe * ' but ' name of the file: ~ safe * "(without the quotes).