Manual connections module

Hello again!

Is it possible to connect modules manually. I mean that the highway feature is nice as long as you do not want the right angles. I want to connect two modules at the corner with parallel connections.

Thanks for any help.

Moreover, this forum is excellent.

Best regards

Hilby

In the Options menu, turn off the automatic router.

Please note... you can manually route the wires - click to change direction, but if you then move the module, automatic router comes into play again and does its thing.

Tags: NI Products

Similar Questions

  • My 2008 imac has twice in the last month abandoned auto connect and restore needed. After the first restoation, it was Ok but used the manual connection. On conversion automatic return, he went for a week and has not yet. I'm OK, leaving on the manual

    My 2008 iMac interrupted twice by automatic logon. After the restoration of the first time, a month before, it wasOK on a manual connection until I converted to automatic, I restored again and it's OK, apparently, when the manual connection. Can there be an underlying cause that should I worry about the?

    Download and run Etrecheck.  Copy and paste the results in your response. Etrecheck is a diagnostic tool that has been developed by one of the most respected users here (and recommended by Apple Support personnel) of the CSA to provide a snapshot of the system and to help identify the most obvious culprits of software that can adversely affect the performance of Mac.

  • Whenever I have shut down my computer, I am disconnected from Windows Live Messanger and must manually connect at the beginning of my next session.

    Question asked by Neil Clark (me)
     
    I selected the option Connect automatically in Windows Live Messenger when I turn my computer. Whenever I have shut down my computer, I am disconnected from Windows Live Messanger and must manually connect at the beginning of my next session.

     
    ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
     
    Sunday, August 22, 2010 01:54
     
    Windows Live K - Ann C response.
     

    Hi Neil,

    This error occurs usually when a record has been changed when an update has been performed on your computer. To resolve this issue, follow these steps:


    Important:     before you edit the registry, make sure to save, to understand how to restore the registry if a problem occurs.

    Warning: If you use the correct registry editor, you may cause serious problems may require you to reinstall your operating system. Microsoft does not guarantee that you can solve problems that result from the use of the Publisher of the registry incorrectly. Use the registry edit at your own risk.


    BACKUP REGISTRY KEYS:

    1. click on Start, click on run

    2. type regedit and click Ok

    3. in the registry editor window, click desktop on the left side to make sure that you backup all the registry keys.

    4. click on file and click on export

    5. save the file on your desktop or in your desired location. It will have the default extension (* .reg) to back up the registry.

    6. If you want to restore a file to the registry, in the Registry Editor window, click file and click Import

    7. navigate to the location and find the name of the file with the .reg extension and click Open.

    Note: you will be prompted that importation has been properly registered in the register.


    TROUBLESHOOTING STEPS:

    1. open the registry editor by clicking on Start, then run. Type regedit and then click OK.

    2 open the user Shell Folders folder. To do this, click on the + sign of each of the products listed below.

    a. click on the [] sign + next to HKEY_CURRENT_USER

    b. scroll and click on the [] sign + next to Software

    c. scroll down and click on the [+] sign next to Microsoft

    d. scroll down and click on the [+] sign next to Windows

    e. scroll down and click on the [+] sign next to CurrentVersion

    f. scroll and click on the [] sign + next to the Explorer

    3. click on the User Shell Folders. A list of entries appears on the right side. Double-click AppData.

    4. the value data, type the following entry, and then click OK: %USERPROFILE%\Application Data

    5. close the Windows Registry Editor and restart your computer.

    Thank you

    K Ann C.

     
    ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------

     
    Thursday, August 26, 2010 09:27
     
    Response from Neil Clark
     

    Hi K - Ann,

    Thank you for the above information.

    I followed you instruction to back up the registry keys, but when I followed step number 7. Navigate to the location and look for the name of the file with the .reg extension and click Open, the message of answers that I received from the registry editor has been as follows: -.

    Impossible to import C:\Documents and Settings\Compaq_Owner\My Documents\My Backup\Backup260910.reg of register: not all data was successfully written to the registry.  Some keys are open by the system or my other processes.

    So I closed my computer and restarted. I then followed your instructions again (this time save the backup of the registry to a member in the same library, called "Backup260910bkup"

    Yet once, when I followed the number of the step 7. Navigate to the location and look for the name of the file with the .reg extension and click Open, the message of answers that I received from the registry editor has been as follows: -.

    Impossible to import C:\Documents and Settings\Compaq_Owner\My Documents\My Backup\Backup260910bkup.reg of register: not all data was successfully written to the registry.  Some keys are open by the system or my other processes.

    Can you tell me what I need to do to work around this problem of backup of the registry?

    I look forward to receiving your response.

    Thank you

    Neil Clark.

     
    ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
    Monday, August 30, 2010 22:19
     
    Response of Windows Live Mechell P.

    Posted by Neil Clark
     

    Impossible to import C:\Documents and Settings\Compaq_Owner\My Documents\My Backup\Backup260910bkup.reg of register: not all data was successfully written to the registry.  Some keys are open by the system or my other processes.

    For this error, you must contact the Support Windows via Microsoft answers Forum link below:
    http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=4

    Thank you
    Mechell P.

    Hi NeilRClark,

    When a registry key is blocked from change, the user can also run a. Registry Registry REG entries to merge the registry keys, values or the value in the system registry data, with the following permission denied error message:

    Cannot import RegistrationEntries.reg. Not all data was successfully written to the registry. Some keys are open by the system or other processes.

    To solve this problem, the ownership and grant full control (read and write) permissions and rights on the protected system registry key.

    Check out this link to do the same thing:

    How to capture a file or a folder in Windows XP

    To take ownership of a file or folder

  • from readers require manual connect

    We organize several vaults file AFP/SMB interview about 30 workstations, which now require manually hit 'connect' on the window of connection for each server. We checked the username/password to inhabit the keychain of the local machine (that we don't store the trousseau on the cloud), and all drives are listed in user "Login Items" list. This issue was not a problem on El Capitan, or earlier.

    Thanks in advance

    This question was for the first time in the beta versions of Sierra. It was not fixed at the time of the release. Maybe it will be fixed in an update of the Sierra...

  • Why my new Aspire one 7 "Tablet B1-730HD must be manually connected to wifi after does not turn off?

    When I stopped my tablet, I have to manually reconnect to the wifi. It does not "sleep", or at any other time, and apart from that it appears to be a stable wifi. I only have this tablet since Christmas, and it wasn't the case when I had first, suggesting that maybe it's the result of an application being installed, or an update? ..... I've tried forgetting the connection, restarting the Tablet, re-login etc, but nothing seems to solve this problem. Can someone please shed some light on this? Thank you.

    You can try a factory reset, but you will lose all your personal data, you will need to make a backup first.

    data/backup of the settings reset & reset/factory

    normally, even after a stop, it will reconnect automatically when you re - enable WiFi.

    do a factory reset, you will remove all the app downloaded, so you can check if it is an update of the system or application that caused the problem.

  • | How can I stop auto connect so I can manually connect to a new network

    I buy a DAP - 1320 Wireless Range Extender and want to install manually since it requires that I have add a password, how can I stop the 8.1 Windows automatically try to load that in time.

    Hello, Trigger, this question is not related to firefox or mozilla products. Please refer to the help section or other support for your operating system resources instead: http://windows.microsoft.com/en-us/windows/support

    Thank you!

  • Windows does not remember to connect to my network and I have to manually connect whenever I turn on the system.

    Why my computer changes from my home group without doing me something?

    Whenever I turn on my computer, I have to open network and sharing Center Center to REMIND my computer how to connect WiFi network to?

    Hi Martin,

     
     
    1. What is the operating system installed on your computer?
    2 did you change on your computer before the show?
     
     
    I suggest you to follow the steps and check if it helps.
     
    Follow the steps and check if that helps.
     
    (a) will begin.
    (b) type run in the search box (if you are using Windows XP click Run) and open it.
    (c) type "services.msc" and then open services.
    (d) scroll down to "wlan auto config" right-click, then click on stop the service
    (e) now go to
    "C:\ProgramData\Microsoft\Wlansvc\"interfaces"everything in this folder, leaving only a folder called 'profiles' delete and delete everything in the folder"profiles"with the exception of a folder called"interfaces"delete everything in the folder)
    (f) restart "wlan auto config" by following steps 1 to 4.
    (g) to connect to your wireless network,
    (h) enter your password (make sure that the connection is automatically checked)
    (i) restart your computer

  • ADF security: connection module writing.

    Hello

    I use JDeveloper 11.1.2.0.

    I am trying to use the ADF security in my application, and I have an exception when compiling.

    It's simple to replicate.

    I do the following steps:
    1. create the new application from merger of the ADF
    2. Add the libraries to the draft opinion ([url http://download.oracle.com/docs/cd/E16162_01/web.1112/e16182/adding_security.htm#ADFFD21668] described here):

    modules/com.bea.Core.WebLogic.Security.auth_1.1.0.0.jar (JDeveloper directory: modules/com.bea.core.weblogic.security.auth_1.1.0.0.jar)
    Oracle.wlserver_10.3/server/lib/WLS-API.jar (JDeveloper directory: wlserver_10.3/server/lib/wls-api.jar)

    3. create a class using the following code:
    package app1.view;

public class Class1 {
    
    public void testIt() {
       weblogic.servlet.security.ServletAuthentication.runAs(null, null);
    }
    
}
    In the editor, everything is OK, but during the process of compiling, I get the error:
    Error(12,55):  cannot access weblogic.security.acl.internal.AuthenticatedSubject
    I found [url http://stackoverflow.com/questions/5571071/where-is-the-class-authenticatedsubject-for-weblogics-programmatic-authenticatio] this and added a com.bea.core.weblogic.security.identity_1.1.2.1.jar (of JDeveloper\modules\) to my project.
    After that, I have another exception during the process of compiling:
    Error(10,55):  reference to runAs is ambiguous, both method runAs(javax.security.auth.Subject,javax.servlet.http.HttpServletRequest) in weblogic.servlet.security.ServletAuthentication and method runAs(weblogic.security.acl.internal.AuthenticatedSubject,javax.servlet.http.HttpServletRequest) in weblogic.servlet.security.ServletAuthentication match
    I can't find information to solve this error.
    Could someone help me?

    Anatolii

    Well the error message now shows you the methods of weblogic.servlet.security.ServletAuthenticationhas two class "runAs", which can be used for the call to

    weblogic.servlet.security.ServletAuthentication.runAs(null, null);

    The compiler cannot decide to use you passed null for both parameters.
    My guess is that you want to use it

    runAs(javax.security.auth.Subject,javax.servlet.http.HttpServletRequest)

    So need to pass a parameter to the method so that the compiler can decide which one to use.
    Try

    javax.security.auth.Subject xxx = null;
weblogic.servlet.security.ServletAuthentication.runAs(xxx, null);

    Timo

  • How to connect to internet/web manually? (not automatically)

    Hi all

    I just got my Milestone and noticed that whenever my phone has a signal, it connects immediately to the Internet as well by the service provider. I wanted to know the ff:

    1. If I see the icon beside the signal and battery indicator (it looks like 2 arrows, 1 up down 1) on the home page that I am connected to the Internet via my ISP, it to say that I'm already charged for surfing the internet or will it only "connects" as soon as I get my browser , email, etc.? I noticed the icon which looks like 2 arrows only "highlight" when I enter the browser, e-mail or other applications that use the net, so I don't know if it means that I am charged only when I get the apps that use the internet?

    2. is there a way to simply manually connect to the internet? For example, when I enter the browser, can he ask me first asked how I want to connect instead of just automatically connect using my ISP connection?

    3. when I free Wifi, the priority phone using Wifi connection via the provider of services on the web connection?

    The reason for my questions, it of that I can't connect to the Internet using my ISP because it costs a lot of money and would connect on the web only when a Wifi connection is available.

    Hello

    There is a free app on the market: APNdroid.

    This app disables 3 G/EDGE/GPRS communication by changing the name of the carrier APN. This disables any Internet connection.

    Hope that helps.

    Nicolas

  • WPSM54G V1.1 - Cannot print without you connect manually - Vista

    Have just set up printing with a Samsung SCX4200 MFP print server. Took a little time unistalling and reinstalling the printer drivers to operate, allowing the computer to download the latest driver for Microsoft Vista was the cure. Anyway thought I got it working, test page printed during installation but etc...

    Now when I try to print any documents I have to manually connect to the printer by clicking on the icon of the client. I guess that's not how it is supposed to work! I tried selecting "print directly to the printer" as was proposed and also tried to remove the TCP/IP port that was also proposed for a connection problem, but it won't let me delete the ports (perhaps for good reason!).

    If someone has an idea of what I can try to solve this problem?

    Sorry - should add that I tried to turn the auto-dissconnet which doesn't seem to work or make a difference. Don't have the always-connected computer prevents any other computer on the network to print?

    Well................. I don't know how, but everything works now. Just power off, then on the print server, then the router, ran the diagnostic program who wanted to install the 'new' driver, I let him do this, and now everything seems to work very well :-)

  • Connection of the ADF application module

    I use JDeveloper 11.1.1.6

    I would like some advice of good practices on how to manage properly the connection module of the application.

    Here is a code example. I want to know if she properly managed in terms of DB, statement and result set connection? No optimization?

    CallableStatement stmt = null;

    Connection Conn = null;

    ResultSet rset = null;

    String sql = "start Process_query(?,?); end; « ;

    MyAppModuleImpl m = dc_bc.getDataControl () .getApplicationModule () (MyAppModuleImpl);

    try {}

    stmt = am.getDBTransaction () .createCallableStatement (_getAttributesStatement, 0);

    Connection Conn = st.getConnection ();

    ArrayDescriptor = attributeDescriptor

    ArrayDescriptor.createDescriptor ("PARAMS_TAB", conn);

    String [] [] attributes = / / initialize the table attributes;

    AttributesArr = ARRAY

    New ARRAY (attributeDescriptor, conn, attributes);  oracle.sql.ARRAY

    stmt.setArray (1, attributesArr);

    stmt.registerOutParameter (2, java.sql.Types.VARCHAR);

    ResultSet rset = stmt.executeQuery (sql);

    do something here

    } catch (Exception e) {}

    _logger. Sever (e);

    throw e;

    } {Finally

    try {}

    If (conn! = null)

    Conn.Close ();

    } catch (SQLException sqle) {}

    _logger. Warning (sqle);

    }

    try {}

    If (stmt! = null)

    stmt. Close();

    } catch (SQLException sqle) {}

    _logger. Warning (sqle);

    }

    try {}

    If (rset! = null)

    RSet.Close ();

    } catch (SQLException sqle) {}

    _logger. Warning (sqle);

    }

    }

    UPDATE:

    According to Timo, I reorganized the code as follows:

    In MyAppModuleImpl I have a processQuery() method

    public String processQuery (String [] [] attributes) {}

    CallableStatement stmt = null;

    Connection Conn = null;

    ResultSet rset = null;

    String sql = "start Process_query(?,?); end; « ;

    try {}

    stmt = getDBTransaction () .createCallableStatement (_getAttributesStatement, 0);

    Connection Conn = st.getConnection ();

    ArrayDescriptor = attributeDescriptor

    ArrayDescriptor.createDescriptor ("PARAMS_TAB", conn);

    AttributesArr = ARRAY

    New ARRAY (attributeDescriptor, conn, attributes);  oracle.sql.ARRAY

    stmt.setArray (1, attributesArr);

    stmt.registerOutParameter (2, java.sql.Types.VARCHAR);

    ResultSet rset = stmt.executeQuery (sql);

    do something here

    } catch (Exception e) {}

    _logger. Sever (e);

    throw e;

    } {Finally

    try {}

    If (conn! = null)

    Conn.Close ();

    } catch (SQLException sqle) {}

    _logger. Warning (sqle);

    }

    try {}

    If (stmt! = null)

    stmt. Close();

    } catch (SQLException sqle) {}

    _logger. Warning (sqle);

    }

    try {}

    If (rset! = null)

    RSet.Close ();

    } catch (SQLException sqle) {}

    _logger. Warning (sqle);

    }

    }

    }

    Then in my grain of support, I'm going to call this method

    MyAppModuleImpl am = (MyAppModuleImpl) dc_bc.getDataControl () .getApplicationModule ();

    try {}

    [ String []] attributes = / / initialize the table attributes;

    AM. processQuery (attributes);

    } catch (Exception e) {}

    manage the code here

    }

    My question is in MyAppModuleImpl,

    I got the connection, statement and result set. But I doubt that I really need to close the connection (in bold)?

    Well, the JNDI Data Source is recommended because you can reconfigure it without redeploying app and connection pool can be shared between different applications on the same server app...

    In fact, in my app, we use JNDI, is it out of the frame?

    Framework will publish connection acquired by AM to the connection pool, and application server (WLS) will manage connections in the connection pool.

    Dario

  • Network connectivity XP Guest crashes: need help quickly!

    I have troubleshooted of many problems of VMware workstation over the years on my own; However, this one has me baffled.

    The installation program:

    • Client: Windows XP SP3. 1.4 GB of RAM. 2 processors.

    • Host: Linux 2.6.25 (Gentoo). AMD X 2 5600 + 2.9 Ghz. 4 GB of RAM. VMware Workstation v. 6.05

    Behavior

    From some time last week, the guest started crashing on boot. After some troubleshooting, I discovered that the guest will begin and if the networks virtual Ethernet (NAT and host-only) are disconnected. To log in after that start immediately blocked the prompt. I have not tested extensively, I think that the client works fine if the Ethernet devices are disconnected.

    Corrections attempted

    • I'd say it's Needless to say, but I'll say. VMtools are installed and up-to-date.

    • I tried to uninstall devices ethernet comments, turn on/off the guest and then reinstalling the virtual devices in the virtual machine settings.

    • Both devices on the guest had been set with static IP (below the range assigned by DHCP); However, their DHCP definition made no difference.

    • I ran the vmware script - configures .pl.

    • I rebuilt and manually installed modules (vmblock.ko, vmmon.ko, vmnet.ko).

    • I ran the guest with the debugger; However, the newspaper produces no significant output.

    • I tried to start an installation that I had saved a few months ago. He has shown the same behavior.

    • Virtual devices host seem to work correctly:

    root@cruise vmware # ifconfig vmnet1
vmnet1    Link encap:Ethernet  HWaddr 00:50:56:c0:00:01  
          inet addr:192.168.101.1  Bcast:192.168.101.255  Mask:255.255.255.0
          inet6 addr: fe80::250:56ff:fec0:1/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:67 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

root@cruise vmware # ifconfig vmnet8
vmnet8    Link encap:Ethernet  HWaddr 00:50:56:c0:00:08  
          inet addr:192.168.102.1  Bcast:192.168.102.255  Mask:255.255.255.0
          inet6 addr: fe80::250:56ff:fec0:8/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:110 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

    Both devices are the ping requests.

    I need this function comments in order to get the work done, and it is not very useful, if I can't do this network.

    Important update

    I've upgraded to VMware Workstation 6.5.1. I have the same behavior. Now, I have another problem. The upgrade of the workstation triggered XP to request reactivation. I have three days (until January 8) re - activate XP. Activate Windows without a network connection is a royal pain.

    burmashave wrote:

    From some time last week, the guest started crashing on boot.

    Has nothing changed last week?  The installation of updates on your host?  New kernel?

    Activate Windows without a network connection is a royal pain.

    It takes 6 minutes by telephone.

  • How to connect script in several chat rooms using the account jabber messages

    Messages frequently disconnected from chat rooms and must manually connect to the chat rooms when I am connected to a jabber account. Is it possible to write a script to have a set of chat rooms that I'll be able to login with a single click.

    Hello

    This is currently beyond the knowledge I have for AppleScript and Messages.

    Try to publish here the Technologies in Mac OS X

    The label for AppleScript

    20:35 on Wednesday. 17 August 2016

     iMac 2.5 Ghz i5 2011 (El Capitan)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro (Snow Leopard 10.6.8) 2 GB
     Mac OS X (10.6.8).
     iPhone and iPad (2)

  • use as a back up of my mac without being connected to the wifi

    Hi I changed to broadband providers and used to use extreme Apple as a base station and a capsule time to backup my mac up to via wifi. However, on my new wifi I want to connect the Apple extreme and time capsule to extend wifi wifi coverage is much better with my new broadband provider. Can I still use my time capsule to back up my mac to the use of the ethernet without time capsule be connected to any wifi. If I can how to do this? Thank you

    Can I still use my time capsule to back up my mac to the use of the ethernet without time capsule be connected to any wifi? If I can how to do this?

    You can do this, but the disadvantage of this type of configuration is that whenever you want to save the Mac, you will need activate WiFi on Mac and manually connect an Ethernet cable from your Mac to one of the three ports LAN <>- on the back of the time Capsule.

    Then, when the backup is complete, you will have to manually, unplug the Ethernet cable and re - turn on the WiFi at the Mac so that it can join the network provided by your ISP modem/router.

  • Connect to the server only in the office

    I want to know if there is a way that when I'm at my computer desktop will automatically connect in server folders, and when I'm at home it will automatically connect in server folders at home.  When I'm here every time that I also have to manually connect to the server and then when I go out to disconnect manually.  I want to if there is a way that the computer can make these connections without me manually linking every time and he knows what network I'm connected to so it only connects in the records of good server for this location.  I tried to use it as a point of connection, but I do not start my computer whenever I come home or when I get to the office.

    I've got El Capitan installed and updated.

    You can take a look at an application called ControlPlane (http://www.controlplaneapp.com/about/). It performs actions based on rules based on the network, etc.

Maybe you are looking for