Network connectivity XP Guest crashes: need help quickly!

Similar Questions

• Updated at El Capitan and my mac doesn't see my camera Canon (connected via USB). Need help. Cannot import images.

  Updated at El Capitan and my mac doesn't see my camera Canon (connected via USB). Need help. Cannot import images.

  Try using using the Image Capture (in the Applications folder)?

• Unable to connect to WIFI. Need help!

  Recently I bought HP Pavilion 10-K010 x 2
  
  I can't connect to any wireless signal. When I click on troubleshoot I get the following message:
  
  "The map of Realtek RTL8723BS Wireless LAN SDIO 802.11n network adapter knows driver - or hardware-related problems."
  
  Help, please

  Also, can you go into Device Manager and uninstall Realtek RTL8723BS Wireless LAN SDIO 802.11n network card? Then restart the computer and it will be re - install the driver again.

  Sometimes, that's all it takes, if your luck.

  There is no driver listed for Windows 10 for this model, so let me know what OS you have.

• can't connect to a website need help

  Why can't connect to a website he continues telling me that this site does not provide identity your connection to this site is not encrypted. I need to use this site I should do to fix this problem

  Hi Deniseweishuhn,

  1. what website you try to connect?

  2. were you able to log into the website before with no problems?

  3. did you of recent changes on the system?

  4. what browser do you use?

  If you use Internet Explorer, you can read the following article and see if it helps.

  Can't access some Web sites in Internet Explorer

  Hope this information is useful.

• Try to reinstall my original Adobe CS after a hard disk crash need help, download again doesn't accept serial number CS?

  Hi, I'm late to the game here, I am trying to reinstall my original Adobe CS after a hard disk crash.  I know that the activation server has been stopped, so I went and downloaded the CS2 version that doesn't require activation.  The problem is my serial number CS is displayed as invalid on the CS2 download, can someone help?  I saw not just a download CS anywhere and their cat had is shown to be completely useless as agent just brutally told me time and again «we don't support that more»

  CS2, Acrobat 7 + Audition 3 (AND PREVIOUS) activation server has disappeared, then read below

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  .

  You MUST use the special version and the serial number on the page, not your original drive or serial number

  .

  NOTE that CS2 will not install on a "modern" with an Intel Mac

  When you install the special version of CS2 on a Win7 or Win8 or Win10 computer, you may need to right click on the program icon and select compatibility Windows XP in the popup of option

• Windows Server 2008 crash - need help to analyze the minidumps

  We have a Windows Server 2008 which crashed 5 times in the last days.

  I placed the file 120313-41636 - 01.zip that contains all 5 landfills in my public skydrive folder to- https://skydrive.live.com/?cid=446280106bb642de#cid=446280106BB642DE&id=446280106BB642DE%21140

  Any help would be appreciated

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• I forgot the password to connect to my computer. need help how to reset

  I have a windows xp 6.0 desk top 5000 series and not for the life of me, I remember my password to connect to my computer. is there a way to reset it with out having to pay $99 to consider in the store?

  Hello

  This is information from Microsoft for when you forgot your XP password.

  "How to connect to your Windows XP-based computer if you forget your password or if your password expires"

  http://support.Microsoft.com/kb/321305

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Other information above, we can not help you more with this.

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• * Need help quickly please * fact the SL400 comes with europian or AC adapter / American CC?

  Im going to buy a Lenovo SL400 laptop I customized...

  I live in Israel, so for a problem, the AC adapter is eauropian or American?

  If not, how can I ask American replance europian AC adapter for Lenovo?

  I would appreciate any kind of help

  Have a nice week than ya'll, Gil

  Welcome to the forum!

  All laptops Lenovo come with automatic universal power adapter detects the voltage. You just need a plug appropriate (detachable) for outputs used in your country.

  I hope this helps.

• I need help quick-PIX 515e worm. 6.3 (5)

  I'm new to this Cisco product and I'm in a jam. I got to get this product operational tomorrow morning.

  (Problem :) I've got communications running inside the firewall, and with an access list I can ping the outside world with success; However, if on the inside, behind the firewall, I can't see anything through a web browser. It's as if the traffic does not go through. Please help, what should I do?

  Here's a copy of the current configuration:

  6.3 (5) PIX version

  interface ethernet0 car

  Auto interface ethernet1

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  enable password xxxx

  passwd xxxx

  pixfirewall hostname

  domain ciscopix.com

  clock timezone IS - 5

  clock to summer time EDT recurring

  fixup protocol dns-length maximum 512

  fixup protocol ftp 21

  fixup protocol h323 h225 1720

  fixup protocol h323 ras 1718-1719

  fixup protocol http 80

  fixup protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol sip 5060

  fixup protocol sip udp 5060

  fixup protocol 2000 skinny

  fixup protocol smtp 25

  fixup protocol sqlnet 1521

  fixup protocol tftp 69

  object-group service Internet tcp - udp

  Description of the group for Internet access

  port-object eq echo

  port-object eq www

  area of port-object eq

  interface icmp permit access-list inside_access_in inside the interface outside response to echo

  interface icmp permit access-list inside_access_in inside the interface outside time limit

  inside_access_in list of permitted access interface icmp inside the outside interface is inaccessible

  inside_access_in tcp allowed access list any object-group Internet any newspaper Internet-Group of objects

  inside_access_in tcp allowed access list any Internet host 208.50.85.161 object-group newspaper Internet object-group

  pager lines 24

  ICMP allow any inside

  Outside 1500 MTU

  Within 1500 MTU

  IP address outside the 208.x.x.x.255.255.224

  IP address inside 192.168.1.1 255.255.255.0

  alarm action IP verification of information

  alarm action attack IP audit

  no failover

  failover timeout 0:00:00

  failover poll 15

  No IP failover outdoors

  No IP failover inside

  208.50.x.x.x.255.255 PDM location outdoors

  PDM logging 100 information

  history of PDM activate

  ARP timeout 14400

  Global (outside) 10 192.168.1.3 - 192.168.1.254 netmask 255.255.255.0

  Global (inside) 1 192.168.1.3 - 192.168.1.254

  NAT (inside) 0-list of access inside_outbound_nat0_acl

  NAT (inside) 10 0.0.0.0 0.0.0.0 0 0

  inside_access_in access to the interface inside group

  routing to the outside interface

  OSPF authentication null

  routing inside interface

  OSPF authentication null

  Route outside 0.0.0.0 0.0.0.0 208.50.85.161 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

  Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  AAA-server GANYMEDE + 3 max-failed-attempts

  AAA-server GANYMEDE + deadtime 10

  RADIUS Protocol RADIUS AAA server

  AAA-server RADIUS 3 max-failed-attempts

  AAA-RADIUS deadtime 10 Server

  AAA-server local LOCAL Protocol

  disable proxy-limit AAA

  Enable http server

  http 192.168.1.0 255.255.255.0 inside

  No snmp Server contact

  SNMP-server community

  No trap to activate snmp Server

  enable floodguard

  Permitted connection ipsec sysopt

  No.-xauth No.-config-mode

  part of pre authentication ISAKMP policy 20

  encryption of ISAKMP policy 20

  ISAKMP policy 20 md5 hash

  20 2 ISAKMP policy group

  ISAKMP duration strategy of life 20 86400

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  dhcpd address 192.168.1.2 - 192.168.1.254 inside

  dhcpd dns 206.165.6.11 209.130.136.2

  dhcpd lease 3600

  dhcpd ping_timeout 750

  dhcpd outside auto_config

  dhcpd allow inside

  Terminal width 80

  Cryptochecksum:xxxx

  : end

  inside_access_in ip access list allow a whole

  That's my guess.

  Im a gui guy, never use the cli. Good luck

• Network design... Need help cont.

  I redid this thread in order to give the points. Here's the original:

  http://communities.VMware.com/message/1515861#1515861

  1. vMotion and HA will not work if you have virtual machines stored on the hard disk of the local server. This is why you MUST use a SAN. Centralized storage allows all servers see virtual machines, so being able to move VMs from server to server is possible (iSCSI, NFS, FC, FCoE). If the virtual machines are sitting on the local server, you can not have HA or vMotion.

  2. don't shoot yourself in the foot and try to start production on 2 network cards. You'll end up with people shouting at you on performance. Get a detailed plan and follow it carefully. Get the right equipment and infrastructure in place first or people will not want to embrace virtualization

  Your installation will work? Yes.  It will be the best performance? N ° you need to invest in some more NIC (6 physical NIC in ESX host is a minimum of IMO, I usually go with 10. There you have before, levels of redundancy and less liklihood of the neck of the bottle.

  If you can't do anything else and MUST use 2 network cards, I would honeslty think to keep everything on 1 vSwitch and tagging VLAN to the port of vSphere group layer. In this way, you can use two NICs for all traffic. No best practices.

• "You cannot use this product under a guest account" - need help!

  I am trying to use a trial version of Adobe Flash Professional CS6 and I installed it under an Admin account and I am an Admin account, but whenever I try to run the software, a pop box up appears and says "Do not use this product under A guest account", I even went to the trouble of making a new account administrator only for installation and execution of Flash , but the same thing happened. But this question also came with CS5, and those that worked well are CS4 and below, but I'll be happy even if you just give me a link where I can download Adobe Flash Professional CS4 trial. Thanks for all your comments I receive.

  Raj Ubhi.

  P.S. I am using Windows Vista Ultimate 64-bit

  Older versions of the test are expected to be found on the following sites:

  http://prodesigntools.com/download-Adobe-CS4-and-CS3-free-trials-here.html

  http://technolux.blogspot.com/2011/02/Adobe-direct-download-links-less-Akamai.html

• BlackBerry smartphones need help quick pull does not

  I'll draw fire fast pro, but when I run it it comes up with this untrapped exception java.lang.IllegalargumentException how could I solve this problem.

  Hello!

  This will make no sense at all, but try this:

  Of Blackberryforums:

  "JayinJay of the user:

• Why is it so my network connection icon appear in the status bar in Win XP (anthing until 2 minutes)?

  At startup, sometimes the network connection icon in my taskbar pretty quickly (30 seconds). It takes about 2 months and then suddenly the icon will take whatever it is 2 minutes to appear for a month or two, and then it will return to normal.

  Can you tell me why this should be?   And I can do to stop what is happening?  It is VERY frustrating!

  HI Johnboy1935,

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• There is more than one active network connection on your computer

  I have two ISP with 2 different IP addresses of course. With one I connect via cable, the other is wireless. Until a couple of days, I'd keep the Wi - Fi turned off on the front of the case, to allow the laptop to connect only to the cable connection.
  Some sites were not loading, indicating problems with DNS resolution. I checked for possible reasons online. I tried to connect to these sites using a webproxy and it worked, so I thought I would try the wireless connection. I turned on and sites would be load normally. However, when I checked my ISP number this shows that the active connection cable one.
  I hesitated to leave the switch turned on, but in order to leave these sites load, I thought I had no other choice. Needless to say that I am not notified at all or with the networks or computers.
  Everything seemed to work fine until the wireless connection has started having problems anyway, it stopped working (ISP issues), so stopped at new loading sites. I tried troubleshooting it and he said: "it has more than one active network connection on your computer" and suggested I would disconnect them. Naturally, I unplugged the wireless connection. Problems: I can not load the sites that seem to need to have wireless to turn on. Note that it does not need it to be active, only to have this switch.
  Please let me know if there is anything I can do to correct this inability to connect to the servers of some sites without the need to have that switch on. If there is no explanation for this behavior, which does not make sense. Again, I know nothing about networks or computers, forgive my ignorance!
  I use Windows 7 Home Premium x 64, my laptop is a Vaio. This happens on all my browsers and sites that have stopped loading were load normally when I 1st turned on the laptop the same day. To later that day there some sites stopped to load, which made me think it was a matter of site. Then I realized that it was not connect to twitter, which was not down, so I realized it was my problem.

  It looks at when you use the wired connection THAT DNS has failed.

  In order to clarify the names of web sites means absolutely nothing to a computer in itself, www.google.com is completely useless. All comms on a network revolves around the IP addresses and the DNS service is a process by which the dedicated servers which addresses are known can tell your PC what is the address of a Web site. For some reason any on the wired connection your PC isn't getting the address to soundcloud.com.

  In family situations more of a PC it gets the IP of the router settings, of course I don't know if this is true in your case. If you open a command prompt and run ipconfig/all, paste the result here and we can check. This would include which server DNS to use that, as I said is normally the router. There are actually millions of internet addresses, and your router could not store them to remedy this it forwards a request for an address of DNS servers listed in its own configuration of IP internet side.

  If you can connect to the router and look its DSL or WAN configuration, you should find at least one or two DNS servers. Take note of them. If you can't connect to the router then look at the website from your ISP for their parameters.

  On your computer, go to the network control and Internet\Network connections, right-click on your wired card, and select Properties. Double-click Internet version 4 Protocol. In normal use get it 2... buttons should be selected, are they?

  If you change only the down one to use the following DNS server address and enter the fields, addresses that you got the router. Click OK twice, but leave the window network connections open as you need.

  Now, try to get your site into a problem. If you can then the problem is with your router. Instead of asking the router address you have bypassed this stage and went on the server, your router is configured to use.

  If you are still unable to the site then the problem is further down and your router may be OK. Then go back to where you set the addresses DNS and replace those that you got the router and turnkey 8.8.8.8 primary DNS server address and 8.8.4.4 in another address, OK once again two times and then try again the site. These 2 addresses are own Google public DNS servers and should work.

  If the ISP provided the router they should replace it. Explain what is the problem and the results of these tests, although I have no doubt that they insist on their own checks before accepting.

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.