Manual keyboard Acer Iconia W700-6499

My Acer Iconia W700-6499 came with an Acer toteable stand covered with leather with a built-in keyboard.  There is no paper or electronic manual covering this accessory.  I couldn't find one online.  The problem is that I would like to know how to engage the switch next to the battery lights on the keyboard.  There must be a way to turn it off, or just drains the battery internal when the Tablet is in the stand and not connected on the support in plastic.  someone had this problem?

I found the "Acer keyboard case Addedum" document that accompanies my W700.  The case has the model # KT - 1252 and there are a few entries in the section Archives 2013 these discussion Forums.  I don't see a way to attach the document but may be able to copy / paste If someone is desperate.

Tags: Acer Tablets

Similar Questions

  • Acer Iconia W700 Wi - Fi problem

    Hello world

    Yesterday, I bought an Acer Iconia W700 Tablet and for some reason, the WiFi disconnets all the time. If I have the Tablet really close to the place of the wi - fi connection, it works fine but when I go into my living room, the internet disconnets or it was limited. Declinations thing I can do is open google and search for something. Internet hangs then...

    It's frustrating this situation... And I was wondering if I should return it or if there is anything I can do about it. I've seen also online users complain about the same problem...

    Thanks for the help!

    I would like to contribute to this topic.

    I tried the following steps which have solved the problem for me:

    Download the latest driver on the Acer's Support site.

    S ' Please make sure that the version of the Wirelesss Lan Driver download is: 10.0.0.217

    As this is a drop-down list dirver it will also improve the bluetooth to 8.0.0.214. Where the grand 220MB file size.

    -Go to control panel and delete the current WLAN + bluetooth drivers.

    -Once removed, you can go through and install the latest driver downloaded.

    -Restart the Tablet after installation

  • Acer Iconia W700 - abgesicherter Modus mit netzwertreiber details

    Hallo miteinander,

    habe versucht mein Iconia w700 mit win 10 in den abgesicherten Modus zu bringen. Damit war ich been, aber wie kann ich jetzt oEST Tastatur of Bluetooth USB Tastatur oder die treffen Punkt 4 im abges unter selection. Modus -Abgesicherter Modus mit Netzwertreibern - auszuwahlen of the F4 oder Punkt 4 antippen ist leider erfolglos.

    There're eine combination mit dem Laut - Steckel set an der Seite zu scrollen, oder die Bildschirmtastatur zu aktiviern?

    Ware as eure Hilfe very thankful.

    Grüße aus Landshut

    Hallo,

    Hello im laufenden the opportunity das Kontextmenü of Startbuttons aufzurufen und sleeps unter "Implement" msconfig Windows einzugeben.

    Dann As of unter dem Reiter 'Start' the den abgesicherten Start auszuwahlen und "Netzwerk" auszuwahlen opportunity:

    BEI einem Neustart bootet das Gerät dann direkt in den Mode safe mit Netzwerktreibern.

    ICH habe das selbst evil far, bei einem 10th switch, bei dem die Tastatur defekt war.

    Warnung! :

    Result war, dass das Gerät im abgesicherten Modus bis zum login screen hochfuhr und ich dann feststellen would, dass weder Touchscreen, noch Bildschirmtastatur funktionierten; are war also was clear more possible!

    ICH konnte dann nur durch das gleichzeitige press von (I think) Windows und Aus taste taste

    year der Seite in die Reparaturumgebung Windows back and would von tablets sleeps aus Windows neu installieren (es gab keinen Wiederherstellungspunkt).

    ICH weiss nicht, ob die deaktivierte Touchscreenfunktion das Standardverhalten tablets von im abgesicherten Modus ist, habe auch im Web nichts dazu found.

    Grave of ja, solltest dringend die finger davon lassen!

    Gruss

    Jochen

  • Acer Iconia W700 white strip

    Dear community!

    I have a problem with my Acer Icona W700. If I connect (then only) is always displayed a white band in the middle of the tablet. It's like a mirror! Take a look at the photo...

    I've tried everything (3 different versions of Windows, the latest drivers etc...).

    All tips for me?

    Just for the record: I'm from the Switzerland... Sorry for my bad English. I hope understand you willl

    Hmm... I think I might have solved the problem...

    I had not tried to install it in UEFI mode, I did and now it works like a charm, not screenproblems! (for now at least - fingers crossed!)

    I used these two instructions:

    http://www.eightforums.com/tutorials/15458-UEFI-bootable-USB-flash-drive-create-Windows.html

    http://www.eightforums.com/tutorials/2328-UEFI-Unified-Extensible-Firmware-Interface-install-Windows...

    And now it seems to work! I'm a happy camper once again!

    / Martin Dahm

  • Acer Iconia W700 case cable keyboard and fresh

    Hi all

    We bought a package in the paperwork for the keyboard, and dock/keyboard W700 renovated last year he mentions a USB to micro USB.  It seems that he should have the cable but nothing was in the box.

    If Yes, then I will contact Acer factory made and ask for one that we have no way to load the keyboard except with one of our phone charger cables (pull the plug of the CA).

    see you soon

    Peter

    Yes, mine came with a white USB/micro USB cable for short (12 inches).

  • ACER ICONIA W700

    I recently bought a W700 Iconia, and no matter what I do, I can't figure out how to get my internal microphone to work. I searched every possible site and video I could find, and have not been able to find a solution that works. I tried setting, Control Panel, you name it. I tried. I really need to solve this problem, someone here has a solution? I also tried to search the forums here, but absolutely nothing. The internal MIC does not work, and to my knowledge it is not even in the list of the audio recording devices... Thanks for any help you can give me.

    Hello

    I could see that you have tried many things to fix the problem, but when you said there is no found recording device. I suggest you contact Acer for warranty repair

  • new Member needs help, reload Programs window 8 and origanal Acer Iconia W700 in

    I messed up my computer by installing windows 8.1 and everything went.  No keyboard more, Acer ring etc.  I want to just this 'thing' to the way it was.  It didn't go back or restoration available and do not send a set of discs, although I have a portable hard drive that might work, if there is such a thing as available backup discs.  Any suggestions would be greatly appreciated.  Do I have to send this thing to the manufacturer, is it a seller out there that makes this service, etc.

    TKS

    Hi JHRolfe

    When you say ' it didn't go back or restoration available "do you mean there is no recovery partition ("eRecovery")? If you restart your machine & press logo Acer ALT F10 & - this should take you in the eRecovery mode where you can restore your computer like new.

    If your keyboard has stopped working, see if you can borrow someone's USB keyboard and try from there.

    If all else fails, then Yes, you will need to send it for repair. Chat with Acer for your area by going to the Web site, click on "support" and then "contact Acer".

    Good luck!

  • Recovery Acer Iconia W700 problem

    Hello

    I W700 Iconia tablet, and I'm trying recovery it.

    With the Tablet, I have some recovery disks. I copied the DVD 1 DVD Recovery 2, System Recovery DVD 2 of 2 USB flash drive. Recovery is up to 99% and then it says I should put Recovery DVD 2 of 2.

    I don't know what to do.

    Can someone help me?

    Thank you

    I solved my problem! I bought an external dvd drive and it works with it.

  • Miracast works only with ptv3000 on acer iconia w700

    Hi, I'm having a problem with miracast on my acer w700, I recently bought a netgear ptv3000 so that I can view wireless whats on screen to the TV with miracast m. However when I add the device to the devices it starts to connect and then suddenly disappears out of devices (windows 8.1). But when I look at the ptv3000 in the old devices control panel appears. When I click on devices in the slide in the sidebar, and then a double then or any other option of the project, it alters the size of the screen on my tablet a square of the resolution and is not displayed to the t.v.

    I have another computer acer laptop - (acer aspire 5750) which has exactly the same problem. However, I have a pro surface that works without problem.

    I think it's a driver issue, but I'm not sure what drivers are required for miracast.

    Thanks in advance.

    274 adds pilot now display wireless option Add :-)

    Please let me know how you get on im still waiting for my miracast receiver

  • Plextor PX-256M5M and Acer Iconia W700 incompatibility?

    Hello

    I have the Acer W700 with msata SSD Toshiba 128 GB. Just bought a Plextor PX-256M5M and installed in the pc. Seems to not work well. I managed to install Win8 on the drive, but it took about 10 hours. Everything about the disk is going very slowly. After installation, I can't boot into Win8. He tries, but only suspended, and sometimes after a long time, a fatal error of win8 screen appears.
    Insert the Plextor drive in a USB enclosure and run some tests of disk and benchmarks show no problem at all. I am able to use the drive as a standard USB3.0 drive.

    Called Plextor support. They say that I ran into a compatibility problem, and they cannot help me. FW/Bios is the latest on the SSD and the PC.

    Anyone with some ideas here?

    BR Lars

    Replacement SDS received and now it works :-)

  • Acer Iconia W700 8.1 update

    As the title says, I have an Acer Tablet, a w700. I upgraded to 8.1 and basically became unnecessary.  I had to go out and buy a dvd drive to reinstall windows. It runs great now, but I have a few questions.

    1. everyone I spoke with said not to upgrade with this tablet and leave with 8.0. This can be done? I will be able to update? This will cause other problems?

    2. is there a way be updated so that he won't not wobbly?  I heard that the only way was to buy a USB upgrade with 8.1 on it and restore windows in this way, otherwise, drivers will weird.

    3. just a general question, why Microsoft has so that hard bleeding?

    I appreciate all help. Must say that this community has proved to be one of the best. Thanks in advance.

    Hello

    You must apply the updates of Windows 8 applicable before moving on to 8.1. However if it
    known issues and then the upgrade to 8.1 is not always possible; as BIOS, chipset or main engines

    conflicts.

    You must be in contact with Acer Support ask in their forums.

    Rob - SpiritX

  • Acer Iconia W700 Parition (Please HELP)

    To a point of failure here. I have installed 8.1, Tablet became useless. Reinstalled windows, everything was going well until I realized as TI / me installed recovery partition of 20g on a 64g hard drive. I have 6 GB of space on my shelf that allows me to use it for anything but the elements of the regular tablet which is useless for me. I bought another small laptop.

    Why do I need a 20g if recovery disk I can't recover from it?

    How can I get rid of him?

    I need to reinstall windows... once again?

    Help, please. I have posted before and I was simply ignored.

    OK fixed it. Apparently, the disc was a record ghost who took physical space and had no purpose. I used the disc part forefully remove and then management in order to extend the main disk drive.

    Thanks for all the help.

  • Acer Iconia W700 - slight delay in contact after inactive for more than 5 seconds

    I upgraded the OS 8 Win provided with the tablet to Win 8 Pro and since then, I have a slight delay in recognition touch screen after the Tablet is idle for more than 5 or more seconds. As a result, I have to type something twice before it responds. Once I spent idle time, touch works exactly as expected. It is only when there is no tactile activity for more than 5 seconds. It becomes a bit annoying when you play a game or navigate the web where you sit idle for a second, click on a link or an action and I must so he struck again because the contact does not save. I played around a lot with the operating system provided with the Tablet, so I cannot confirm if this happened before I upgraded to pro.

    In addition, I have since 8 reloaded Win pro from scratch and there was no change. It seems almost that the tactile sensors screen go to sleep or something. Very strange.  Thoughts anyone?

    Go to Device Manager, look for human interfaces, then change the two input USB device and uncheck the first line in the current tab.

  • Iconia W700 bought in Russia.

    Hello community there.

    I am Greek and I received a gift for my birthday an Acer Iconia W700. The problem is that the device was bought in Russia then everything inside is in Russian.

    I know that you can change the language of the Interface, so I tried to do. Suddenly, I see that the version is Windows 8 (x 64) language. Ok! How we deal with that?

    In the package, I find 4 DVD. System, recovery 1/2 2/2 and recovery (in Russian). Then I read that I have an external USB DVD drive. In the year 2013 we live, all devices accept USB. Why external DVD? For a restore (maybe) once in a year? Really, who has one?

    In any case I read somewhere in the community to try to put all the files inside a USB drive, and while the startup process is normal, he asked me to Recovery DVD #2. The files were already inside! What we do now? Why the program is not really read the files?

    So I reset the tablet. Of course the BONE has been altered. I could not boot normally, so I installed a new copy of Windows 8 Pro (x 64). Downloaded and installed the drivers for Acer also. So-called DPTF did not install because it says that the model does not meet the minimum requirements (?).

    DPTF thing, as I understand it, is the problem why when I wake up the device from sleep, she separates my screen the two halves. I mean, I can see the top of the screen twice while the touch works at full screen. I changed also driver VGA and Chipset. The same problem.

    After this whole mess, I spend 3 days looking and nothing more.

    I have a device that is incredible for the present, in a language that I could not read, with recovery DVD that work ONLY by external DVD player and not by USB, and after I installed Pro Win8, using a different serial number that I bought, the drivers do not work.

    It is not the first Acer product which I am owner and still Acer dissapoints me.

    Now, I'm trying to find a way to restore from recovery of the operating system disks. But as I see it will be in Russian. Unless someone gives me an ISO with English interface. Will be the original s/n will work? Or maybe someone can give me the driver for DPTF.

    Thanks for your time in reading my little 'adventure '. Any ideas or advice will be useful.

    [Direct download deleted]

    Installing drivers
    Download Center to download the Acer drivers for our tablet.
    Unzip and install the drivers from the chipset, AHCI, AMT, sensor, sensor hub and monitor HID DFU. DFU / Hub placed dpinst.exe departure.
    Install the wireless LAN driver. The current update of the manual of writing (10.0.0.217.v3) includes driver and a connection Wi - Fi and BT, so a driver for BT I did not define.
    Driver for video, I decided to only put one that offers Acer and took from the Intel site. You decide what to put it on myself. If you decide to Intel, then go here, select graph, graphical desktop drivers and Intel® HD Graphics 3000 or 4000, depending on your tablet.
    Realtek Audio driver. You can, of course, also from the Realtek site, but the driver of Acer includes Dolby Home Theater. I decided to not give up this shtukentsiya, painfully, as for me.
    Driver Intel platform dynamic & heat (DPTF) Framework. Important thing. This driver is installed for the changes made to the tablet of i5-3317U chipset (and perhaps at i3-3217U). It will not work on the tablet with an i3 - 2365M installation. However, even on supported Tablet just so that he refuses to be installed. To resolve this problem, you must first use the so-called DPTF_Fix:
    DPTF_fix.zip (105,23 K)
    Downloads: 42
    You must run the batch file as administrator Fix_DPTF.cmd (preference manually from the command line) and then run as Administrator "C:------Windows-System32-DptfPolicyCriticalService.exe ' and ' C:------Windows------SysWOW64------DptfInvalidPolicyRemover.exe" and after that put the driver itself.

    --> google translated from http://acer-club.ru

  • Manual Acer Iconia TAB A100-07U08U 7 inch Tablet (8 GB) by Acer

    How can I activate my

    Acer Iconia TAB A100-07U08U 7 inch Tablet (8 GB)

    ???

    Nice day

    Download the user manual from: http://support.acer.com/us/en/product/default.aspx?tab=1&modelId=3849

    Kind regards

    FReeZA

Maybe you are looking for

  • Ios 9.3.1 WiFi problems

    My iphone does not connect to wifi after ios 9.3.1. Is there a solution? Thank you, Karl.

  • Backing Up vs cloning/imaging

    I am about to replace the HD that came with my MacBook Pro for mid-2010 with a slightly smaller SSD, until I'm at this point I tried to reformat the hard drive that is installed, this does not resolve some issues that I have so I'll try to replace it

  • Satellite A50 - internal speakers are dead

    Hello My two internal speakers do not work. I plug the earphone is ok.Driver is ok, material too. I tried to get new speakers without success. Can I replace the speakers with small (I took my little battery radio)?It will work or affect the MB?

  • ThinkPad 8 screenshot

    Hi allHow to do screen shot with 10 Windows Tablet?I tried the down volume key + windows, display go a little dark, but I am unable to find the file with screenshot in the image folder.

  • Finder in El Capitan

    Hello I've just upgraded to El Capitan. Previously in the Finder there is a folder on the left, under the blows of heart, for the photos. This has now disappeared and the only way to see my photos in Finder is under all my files, where they are scatt