Manually change the result of the calculation

Similar Questions

• Photosmart HP 6520: lost my photosmart 6520 by manually changing the server address

  Hello
  My printer is connected wireless and prints well by AirPrint and when I send it jobs by email, but after successfully scanning to e-mail several times it suddenly wouldn't connect to the Internet, which gives an error message. Tried to turn it works several times. Leva help on the forum and follow-up of boards to manually change the DNS server to 8.8.8.8 and 8.8.4.4 another server. This resulted in my losing access to my printer via his IP on my browser so I can't undo my actions and my printer always gives the error message when I ask him to scan to e-mail. All other functions work.
  Help, please. Thank you

  Hey @Kybosh,

  Welcome to the Forum from HP Support.

  I understand that you are having connectivity problems with your HP Photosmart e-all-in-one 6520, printer.  I want to help you with this.

  I'm surprised that a manual DNS has interfered with your setup - I think generally it does the opposite and enhances connectivity.  In any case, do not despair!   I have some suggestions that can restore the features of your printer.

  I recommend a fresh start by restoring the default settings of your printer to avoid any persistent configuration problem.  Here's how:

  • Front panel of the printer, press the key
  • Touch tools
  • Touch Restore Factory Defaults
  • * Note that this will reset your settings wireless and webservices.  If you have an address custom ePrint it is deleted permanently.  Click here for more information about setting up a custom address ePrint.

  With your restored default settings, continue on as indicated:

  • Touch the wireless icon ()
  • Run the Wireless Setup Wizard and reconnect to your network (SSID)
  • Enter the wireless password if prompted
  • Once you have created a wireless connectivity, reactivate your webservices/ePrint feature (essential for the use of scan to e-mail)
  • Tap the icon of webservices ()
  • Enable Web services and press OK to enable your printer will automatically update
  • Once completed, it will print a page of information.  If you are looking to complete an ePrint installation, it will be useful later - click here for more information.

  Now, if all goes well you can rebuild your Setup email scan:

  • Tap the scan icon
  • Tap the scan to E-mail
  • Enter your personal email address
  • Retrieve the PIN code of your Inbox
  • Enter the PIN on your requested to complete printer installation

  The above restore the functionality you were missing?

  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking on the 'Thumbs Up' icon below.

  Please post in the Forum of HP's Support and have a great day!

• Manually change the brightness on the display screen.

  How to change the brightness when the blue Fn key don't decrease the screen brightness but don't don't increase the brightness of the screen.  How to manually change the brightness of the screen without the keyboard shortcut keys (they do not work)?

  Depends on the brand and model of your laptop. Did you install drivers from the manufacturer, or done it with XP (assuming that you do not have XP) pre-installed. For example, on my Gateway laptop, Fn + F8 lights up the screen, and then if I press it again, it fades. Or with keys Fn + I can brighten it gradually, and Fn + darkens it gradually.

  You can figure out or dim the monitor in the video control panel (again, this depends on the manufacturer of card or portable video). Right-click on your desktop and choose Properties. Then go to settings, advanced and then (probably) the video card/chipset that is installed. Somewhere there may be settings to adjust the brightness or gamma of the display. Without knowing your material, I can't say for sure, but it would be the starting point.

  SC Tom
  -There is no such thing as TMI if you request technical support.

• Manually change the lyrics of MP3 in Windows 7

  I've been looking for a way to manually add/edit the words of MP3s in Windows 7. I know that the support for this function (which was present in Windows Media Player 11) has been suspended in the last version of Windows Media Player. I also found some tips on the use of http://www.lyricsplugin.com/ plug-in for Windows Media Player, but even using that, I couldn't find a way to edit the lyrics 'manually'.

  I listen to international music for which a lyric is not usually by using this plug-in automatically, so I really need to "manually" change the words.

  What do you think?

  The Windows Media Player Plus! plug-in adds a new WMP tag editor, which you can use to add words. After you have installed Windows Media Player Plus!, right click on a song you want to add lyrics to, select more tags editor , go to Advanced . Right-click on a label, select Add , and choose WM/lyrics .

  Note that the method above will not integrate the words actually in the MP3 file. To do this, you need to use a tool of external marking as Mp3tag . Tim Baets
  http://www.BM-productions.TK

• How to manually change the jad arguments

  Hi all

  I have a file .jad with the following line:

  MIDlet-1: myApp,com/myApp/images/icon.png,test_arg

  , where 'test_arg' is a string I want to get back on my method (String [] args) principal.

  I use Eclipse. I try to write "test_arg" on the field "argument Application" on the BlackBerry Application descriptor. After that, I build the project and install it using a real device using OTA, and I get the argument successfully.

  But the problem is: I can't manually change the value of the argument. For example: after generated Eclipse the .jad file, I changed the line above to the following value:

  MIDlet-1: myApp,com/myApp/images/icon.png,this_is_a_new_value

  After that, I downloaded and install the application by using OTA with the help of a real device, but in my main method, I still continue to retrieve the value 'test_arg '! Only it will update the value if I change on eclipse (using the field "argument Application" on the BlackBerry Application descriptor) before you build the project. But... If is not possible to change the value, then why we MIDlet-1 line on the .jad file? Or is it possible?

  Feel free for any suggestions or comments.

  The arguments are integrated in the COD, so change them after that in the JAD file will have no effect.

  This article can help you with the addition of a custom in your JAD file property/string.

  Read the attributes of a JAD file programmatically

  http://supportforums.BlackBerry.com/T5/testing-and-deployment/programmatically-read-the-attributes-o...

• How to manually change the ports for HTTP on the server vCenter Server

  Hello Experts,

  We have Windows Server 2008 SP2 machine where we v5.1 installed with other SSO components, inventory services, vCenter Server and Update Manager.

  So we went from SSO, the inventory services and vCenter Server fine however, vCenter Server has stopped working. While we were to modernize SSO, the service could not start after the upgrade and the recd suite error "Service VMware KDC service could start.". So, we found the article on the VMware site that said port 88 to cause the problem. To find out more by using the netstat command, we found vpxd.exe used port 88. That is why, we stopped this service and proceeded to the upgrade of the SSO. The upgrade is complete following the inventory service and vCenter Server. While we were upgrading vCenter Server, we found that port 88 was used for HTTP communication.

  So we wasted on the use of the port. The upgrade has been completed successfully, however, we can not connect to vCenter server using vSphere Client version 5.1 or 5.5. We even tried to start the VMware VirtualCenter server using the services.msc console and it failed.

  So we assume the port changes happened during upgrade of the SSO meets the HTTP port by vCenter server usage. We need help on how to manually change the ports for HTTP on the vCenter server.

  Suggestions forward. This problem is with the production servers.

  Thank you

  Karan

  This has been resolved... port has been changed manually and works very well.

• How to manually change the catalog has / B and invalidate the cache of formhandler

  Hello
  
  How to manually change the catalog has / B, as when doing JIU there are active or not active catalog, a catalog of make us changes and deploy the project, it will automatically do that.
  
  I want to do the same to my formhandler, I was wondering how should I do? There should be a manager class that will handle this, I want to know what call class.method and other changes needed to be made.
  
  Thanks in advance

  FormHandler appeal:

  void switchDS() {}
  SDS SwitchingDataSource is getProductCatalog () .getDataSource ();.
  sds.prepareSwitch ();
  sds.performSwitch ();
  getProductCatalog () .invalidateCache ();

  }

  Peace
  Shaik

• Manually change the speed of transmission in RTMP dynamic

  I'm trying to Strobe Media Playback.

  I was wondering is it possible to manually change the flow of broadcast while I consult a stream?

  It would be useful that I can manually switch quality up and down when I'm making the dynamic Streaming demos in my conference. Is there a way to do this?

  The package makes FMS dynamic streaming demo automatically switch quality from top to bottom and make an impressive demonstration of quality switch, how can I do?

  "I was wondering is it possible to manually change the flow of broadcast while I consult a stream?

  Yes, through the JS API:

  You can see it in action on:

  http://OSMF.org/dev/1.5gm/jsdemo.html

  or

  y mf/content/test/manifest-files/dynamic_Streaming.f4m&autoDynamicStreamSwitch=false&autoPla http://OSMF.org/dev/1.5gm/YouTube-GoogleAnalytics.html?src=http://mediapm.edgesuite.NET/OS = true

  "The package makes FMS dynamic streaming demo automatically switch up and down and make quality an impressive demonstration of quality switch, how can I do?"

  If you want to demonstrate the PABX, you have to make changes to the factors that are taken into account for switching - for example, to limit the resources

  The easiest way is to use a bandwidth manager to change the bandwidth.

• Captivate 5 - How to manually change the type of legend (style)

  I want a caption style different to some of the legends of text on a slide. How can I manually change the style of a text of the legend, for example Popup Adobe Adobe red, without changing all the text captions in the slide. In other words, I want to manually cancel the caption style to default text on some legends but not others. Style Manager object changes all the text captions, not what I need. (It was very easy to do in version 4, but can't find where to do it in version 5)

  Hello Jay,

  Just change using the Properties Inspector. There will be a sign more in front of the indication of the style, to indicate that this object has a different style to the default style, but that is not a problem at all. You can replace the default style in this way.

  Hope this is clear enough, otherwise please post again.

  Lilybiri

• Manually change the database of Photos?

  Is it possible to manually edit the database of Photos?

  I was diagnosing a problem that surfaced after initially migrating my library, iPhoto photo some time ago.  It seems that a large number of photos in the iPhoto library had wrong file paths.  The pictures themselves were there, but iPhoto had an error in the paths of files.  (This happened probably years of updates, transfers to different machines, etc.  It is a very old and very large library).

  I used a third-party tool 3 to begin to correct the problem in the iPhoto library, and so far, that seems to be promising.  This approach however, kill my library of Photos and re-import to iPhoto.  Which seems a bit risky for me, maybe lose pictures added since the migration (which is not bad), since I'm not really sure how interaction with iCloud will manage this attempt.

  But it presents to me unless I am able to inspect and change some of the data that the readers of the library of Photos directly, so maybe I can apply a fix directly without having to re - migrate.  It seems that after the XML files for libraries, but there may be another approach, that I could use to directly modify the photo library?  All I really need to do is change some paths that point to pictures.

  Here's a post by user Pascal MaH describing how he managed to modify an iPhoto database.  Maybe you can use the technique to alter a database of Photos.  As usual, don't forget to have a backup current library before you try:

  Pascal Mah

  Re: iPhoto 11 referenced library problems

  July 27, 2011 16:28 (in response to Terence Devlin)

  YES!

  I finally managed to get my iPhoto library!

  But it has not been easy. I had to hack into the database file that you want to put in place good things.

  After much trial and error, here is the procedure I came to, that finally worked for me (use at your own risk):

  0 make sure you do enough safeguards so as to revert to the previous state if something goes wrong!

  1 make a copy of your photo library in iPhoto [Show Package Contents]/Database/apdb/Library.apdb on your desktop.

  This file contains most of the necessary data for the management of your data in iPhoto.

  2. open this file using a SQLite database manager.

  I've used Navicat 9.1, which has features nice import-export. For direct editing, basic 2.0 is may be easier.

  3. open the RKMaster table.

  This table contains all the records for the individual photos in your library.

  4 fix the path of each of your photo files in the imagePath for their course filepath column.

  It contains the path of your photo files at the time they were imported and is not updated by iPhoto, even if you have moved your files photo somewhere else.

  If you have thousands of ways to correct, a good idea is to export this column in a text (including column modelId for SEO) file and to correct the paths using the substring function search & replace in your favorite text editor. Do not forget to re - import data properly corrected using column modelId as references.

  5. If necessary, correct, in the same way, the content of the column fileVolumeUuid to the value of the drive that currently contains your picfiles.

  If so, get this value given a PIC that was recently imported from this player.

  6. If your drive name has changed, also to correct its name in the name column of the RKVolume table.

  Identify the appropriate record taking into account its uuid obtained previously.

  7. If you are satisfied with your work, leave the database, program management and restore Library.apdb to its original inside your iPhoto library location.

  Keep the old somewhere in case something goes wrong.

  8 run iPhoto to see if your work is successful!

  At this point, you might consider the construction of the library (hold down alt - cmd at the launch of iPhoto) and choose repair the iPhoto library database (make sure to let him rebuild the AutoSave iPhoto library database disabled!). This could correct some possible unconsistencies resulting from your changes. Also, a good thing would be to rebuild all thumbnails. If iPhoto don't you do not bug to locate files during this process, you may have done your work right! If this is not the case, go back to step 1.

  As said, it worked for me, without visible inconsistencies or side effects to be noticed in the behaviour of iPhoto (at least for now). But perhaps some knowledgable people could comment on and improve this process, and a database script guru can also help automate this. Please comment.

  Lessons learned (how I understand things as far as I know):

  A. Library.apdb stores the original drive and the path to the picture at the time files wherever they were imported. It is not changed because the files are moved.

  B. some other data (BLOB Binary?) are used to track the files to their actual location. Therefore, it seems OK to move photo files once they have been imported.

  C. Unfortunately, these other data are broken, if the file is re-created (even with the same content and location), for example with one based on files backup and restore (Time Machine).

  (D) in this case, iPhoto is unable to repair the file if its drive and path does not match the one when the file is imported, stored in the database. Also, there is no mechanism in iPhoto to correct these data.

  (E) therefore, it is very important to import photo files in iPhoto only when they are already in their final location! Otherwise, your iPhoto library won't survive a Time Machine backup and restore! (A disk block-based backup might work... I don't know).

  F. ... And Apple should really, really solve this problem! (Correcting the filepath to the current location of the file and stored at least when the database is repaired, and by offering at least some basic file options reconnection).

  I have not tried so I can't confirm or deny its effectiveness.

  

• IOS publish setting, by manually changing the application descriptor file?

  I publish an IOS app with a few donkeys.

  ENA need some changes made to the application descriptor file, but when publishing for IOS, there is no authorization with the option "manually adjust" tab

  Any ideas how to change the file descriptor of IOS?

  Thank you

  Pete

  Well Yes, as Colin says, there is a block of you can add to your app xml descriptor (generator flash should generate one for you in your descriptor xml app and then you can just change).  Nothing in here will be added to the info.plist in the iOS app resulting.  There is also a block matching for Android.

  Thus, for example, if I want my app to be a universal app (iphone and ipad is intended), I would normally like this in info.plist, using the key UIDeviceFamily of Apple:

  UIDeviceFamily
  
    1
    2
  
  

  To do the same thing in the AIR, I add the following, inside the main application tag:

  
    UIDeviceFamily
    
      1
      2
    
    ]]>
  
  

  In this way, you can directly add nothing to the info.plist of the IPA file resulting of your choice and add the permissions/settings that allows Apple.

• How to manually change the DNS zone files?

  I'm running OS X version 10.11.2 (El Capitan) and using App Server version 5.0.15 on a Mac Mini.

  I need to change the DNS Zone files manually because the DNS Server App Manager does not provide a U / I in order to add some elements (such as adding a delegation, etc.).  I use TextWrangler (5.0.2) as editor-in-Chief.

  I found an old post on how to do this here, but the information listed it seems obsolete.

  I was able to find the zone files to:

  / Library/server/name

  as:

  CBI .

  When I try to save or overwrite the db. files, or try to save all the files in that directory, I get an error indicating that:

  "Save the authenticated for this file failed (error application code: 20004).

  Since a window Terminal, if I go to that directory and type:

  Echo hello > temp.txt

  I get:

  Permission denied

  I am logged in using an administrator account.

  Before editing the db. files, I turned off the DNS in the App Server, then exit the server application server.

  What should I do to manually update the db. files?

  These files are protected from root.  You need to elevate your permissions to be able to change them.

  Probably you use a text editor like vi, nano or pico command line.  sudo vi/path/to/file for example.

  Back up the files first to protect against error.  In addition, be aware that Apple can run on some of your changes if you change the.app areas.

  Reid

  Apple Consultants Network

  Author of "El Capitan Server" - Foundation Services: available exclusively in Apple iBooks Store

  Author of "El Capitan Server - Collaboration & control": available exclusively in Apple iBooks Store

  Author of books of Yosemite server and server Mavericks

• ScatterGraph does not manually change the axis to execution interval

  I use the ScatterGraph and the WaveFormGraph in VS2010 Winforms application.  I have the interaction mode axes set to EditRange.  The WaveFormGraph command allows to edit the axis range by clicking on the end of the axis labels and modify them.  ScatterGraph control is not even though the documentation I've read says it should.  The mode of the axis does not seem be the question that I have changed between fixed and AutoScaleLoose (which is not the choice to have everything showing changing data, if you want your range entered manually to maintain).  I tried a new project with a ScatterGraph control with the default settings and checked that it does not change the axis interval.  Is there a way to change the settings to allow you to manually edit a ScatterGraph range in this way when running?

  Thank you!

  Hi Lybro,

  You have activated the "EditRange" of the graphical object of point clouds InteractionMode? There are two places that the mode of interaction is defined, one for the axis and the other for the scatter chart, both must be enabled for writing at work. I just tested this with Measurement Studio 2013 and it works. Let me know if it helps.

  Kind regards

  Kevin

• Manually change the IP address on 8500 A909g

  After the 8500 A909g printer has been turned off for a few days, the program on my computer HP solutions Center portable 32-bit Vista now displays a message 'disconnected '. The IP address is now 169.254.184.17

  By HP, troubleshooting instructions and messages in this forum, paste this IP address in the address bar of IE or Firefox only returns with "page not found". Downloaded and run the HP diagnostic utility, but it did not detect the printer even though I tried several buttons refresh or other buttons on the screen 'advanced tools '.

  Tried to change to a static IP address to the printer via the front panel of the printer (configuration-> network-> Advanced Setup-> IP settings-> manual) but ran into an obstacle because I can't change successfully '184' to a '0' or the 174' to a single digit for the sequence with the IP address of 192.168.0.1 Dlink router

  The window of manual reset IP address has only the number keys and no button 'Clear' or 'delete' to get rid of the extra numbers.

  I'm not computer literate, so I do not understand why another round of office seems to print just fine with a completely different performance of IP address for the printer, one that falls not in the familiar format 4 part mentioned above.

  I was able to create an address IP of DHCP reservation on my router and the printer works now. I'm a bit difficult to know if I should also go to the Web server embedded HP to change the networking > connections > Wired > Setup manual IP address and enter the IP address/Subnet Mask / Gateway default numbers printed on the HP Network Configuration Page that I printed in the menu touchscreen printer. I have to also then change from automatic to manual DNS server?

  Thanks for any further help.

• Manually change the visemes after sync lip split in visemes?

  How can I manually change visemes in the timeline panel after split lip sync in visemes?

  Thank you

  After selecting a Lip Sync Audio Input and choose the command "Split Lip Sync in visemes" menu, the application will create a cascade of struggling within the timeline.  Each is an individual viseme and can be removed, trimmed, slit, duplicated, etc..  Do not specify the names of take what viseme is represented, but moves the needle of time on making will show the viseme in the places Panel.  Note that we are working on a more editing experience.