Manually change the database of Photos?

Is it possible to manually edit the database of Photos?

I was diagnosing a problem that surfaced after initially migrating my library, iPhoto photo some time ago.  It seems that a large number of photos in the iPhoto library had wrong file paths.  The pictures themselves were there, but iPhoto had an error in the paths of files.  (This happened probably years of updates, transfers to different machines, etc.  It is a very old and very large library).

I used a third-party tool 3 to begin to correct the problem in the iPhoto library, and so far, that seems to be promising.  This approach however, kill my library of Photos and re-import to iPhoto.  Which seems a bit risky for me, maybe lose pictures added since the migration (which is not bad), since I'm not really sure how interaction with iCloud will manage this attempt.

But it presents to me unless I am able to inspect and change some of the data that the readers of the library of Photos directly, so maybe I can apply a fix directly without having to re - migrate.  It seems that after the XML files for libraries, but there may be another approach, that I could use to directly modify the photo library?  All I really need to do is change some paths that point to pictures.

Here's a post by user Pascal MaH describing how he managed to modify an iPhoto database.  Maybe you can use the technique to alter a database of Photos.  As usual, don't forget to have a backup current library before you try:

Pascal Mah

Re: iPhoto 11 referenced library problems

July 27, 2011 16:28 (in response to Terence Devlin)

YES!

I finally managed to get my iPhoto library!

But it has not been easy. I had to hack into the database file that you want to put in place good things.

After much trial and error, here is the procedure I came to, that finally worked for me (use at your own risk):

0 make sure you do enough safeguards so as to revert to the previous state if something goes wrong!

1 make a copy of your photo library in iPhoto [Show Package Contents]/Database/apdb/Library.apdb on your desktop.

This file contains most of the necessary data for the management of your data in iPhoto.

2. open this file using a SQLite database manager.

I've used Navicat 9.1, which has features nice import-export. For direct editing, basic 2.0 is may be easier.

3. open the RKMaster table.

This table contains all the records for the individual photos in your library.

4 fix the path of each of your photo files in the imagePath for their course filepath column.

It contains the path of your photo files at the time they were imported and is not updated by iPhoto, even if you have moved your files photo somewhere else.

If you have thousands of ways to correct, a good idea is to export this column in a text (including column modelId for SEO) file and to correct the paths using the substring function search & replace in your favorite text editor. Do not forget to re - import data properly corrected using column modelId as references.

5. If necessary, correct, in the same way, the content of the column fileVolumeUuid to the value of the drive that currently contains your picfiles.

If so, get this value given a PIC that was recently imported from this player.

6. If your drive name has changed, also to correct its name in the name column of the RKVolume table.

Identify the appropriate record taking into account its uuid obtained previously.

7. If you are satisfied with your work, leave the database, program management and restore Library.apdb to its original inside your iPhoto library location.

Keep the old somewhere in case something goes wrong.

8 run iPhoto to see if your work is successful!

At this point, you might consider the construction of the library (hold down alt - cmd at the launch of iPhoto) and choose repair the iPhoto library database (make sure to let him rebuild the AutoSave iPhoto library database disabled!). This could correct some possible unconsistencies resulting from your changes. Also, a good thing would be to rebuild all thumbnails. If iPhoto don't you do not bug to locate files during this process, you may have done your work right! If this is not the case, go back to step 1.

As said, it worked for me, without visible inconsistencies or side effects to be noticed in the behaviour of iPhoto (at least for now). But perhaps some knowledgable people could comment on and improve this process, and a database script guru can also help automate this. Please comment.

Lessons learned (how I understand things as far as I know):

A. Library.apdb stores the original drive and the path to the picture at the time files wherever they were imported. It is not changed because the files are moved.

B. some other data (BLOB Binary?) are used to track the files to their actual location. Therefore, it seems OK to move photo files once they have been imported.

C. Unfortunately, these other data are broken, if the file is re-created (even with the same content and location), for example with one based on files backup and restore (Time Machine).

(D) in this case, iPhoto is unable to repair the file if its drive and path does not match the one when the file is imported, stored in the database. Also, there is no mechanism in iPhoto to correct these data.

(E) therefore, it is very important to import photo files in iPhoto only when they are already in their final location! Otherwise, your iPhoto library won't survive a Time Machine backup and restore! (A disk block-based backup might work... I don't know).

F. ... And Apple should really, really solve this problem! (Correcting the filepath to the current location of the file and stored at least when the database is repaired, and by offering at least some basic file options reconnection).

I have not tried so I can't confirm or deny its effectiveness.

Tags: Mac OS & System Software

Similar Questions

  • Problem changing the database of reports of HFM

    Hi, I have currently two applications in HFM, one is for the development and the other for testing

    I have several reports in my application dev., and I'm trying to use them in the test application.

    I followed the manual instructions on how to change the connection of database reports using the tools-> menu change the database connection on the workspace.

    I managed to most of the cases, but 4 reports throw a warning that says ArrayIndexOutOfBounds that blocks the process of "migration."

    Could someone help me with this one?

    Thank you

    I hate to say it, but I have a lot of problems with that too. Sometimes it does not give an error, but it does not work. My solution is to change the connection of database outside the workspace and re-import them manually. In particular, this makes the most sense if you have a quantity in bulk of reports to work with. (i.e., I have a new app and I want to import a group of reports to run against it).

    As I do this is to use a text search and replace tool and replace the existing information in the database with the new information.

    I've posted a text on how to do it here.

    I'll see if I can find it and I will update this post with a link.

    Edit: Link is here: Re: migration of HFM, FDM, SS one env to another

    Look at my notes of the workspace as I speak to you of migration related to a different environment that has the idea of Basic.

    Thank you

    Published by: beyerch2 on August 25, 2011 14:52

  • How can I change the pixels for photos on the iphone 6? IOS 9.1

    How can I change the pixel for photo taken on my iphone 6? 9.1 IOS I opened the camera and there only HDR power...  Help, please!

    You do not change the pixel setting.

  • Change the database file [DFL]

    Hello

    I'm looking for a way that may alter the *.ldf database file, some customers do not put the Signal_endcoding_types in the FLA file. I need a way to save the 'coding' in the file with labview UI. I found a few old FLA file API, but I tried, it seems to me that they only works on older versions. My fla file version is LIN_protocol_version = "2.0"; LIN_language_version = "2.1"; could someone tell me if there is a way that can achieve my goal.

    Thanks in advance

    Best regards

    Melo

    You want to edit the FLA file?  Because if so there is nothing that neither currently offers that will work for you.  If you want to use the FDL in XNet and you want to change the settings imported from the FLA so you can use the XNet API to achieve this.  When you use XNet you import the FLA (or other database files) and then you can modify the database, but is not edit the FLA.  This changes the database using the XNet, which began with the importation of the DFL.

    Recently, there has been updates of XNet which allow you to export a database, but I think they don't support that export to a database BOX.  So with CAN you can import a DBC XNet, change it using the database, editing tools, and then export it to a DBC should have the changes you made.

  • Manually change the brightness on the display screen.

    How to change the brightness when the blue Fn key don't decrease the screen brightness but don't don't increase the brightness of the screen.  How to manually change the brightness of the screen without the keyboard shortcut keys (they do not work)?

    Depends on the brand and model of your laptop. Did you install drivers from the manufacturer, or done it with XP (assuming that you do not have XP) pre-installed. For example, on my Gateway laptop, Fn + F8 lights up the screen, and then if I press it again, it fades. Or with keys Fn + I can brighten it gradually, and Fn + darkens it gradually.

    You can figure out or dim the monitor in the video control panel (again, this depends on the manufacturer of card or portable video). Right-click on your desktop and choose Properties. Then go to settings, advanced and then (probably) the video card/chipset that is installed. Somewhere there may be settings to adjust the brightness or gamma of the display. Without knowing your material, I can't say for sure, but it would be the starting point.

    SC Tom
    -There is no such thing as TMI if you request technical support.

  • Photosmart HP 6520: lost my photosmart 6520 by manually changing the server address

    Hello
    My printer is connected wireless and prints well by AirPrint and when I send it jobs by email, but after successfully scanning to e-mail several times it suddenly wouldn't connect to the Internet, which gives an error message. Tried to turn it works several times. Leva help on the forum and follow-up of boards to manually change the DNS server to 8.8.8.8 and 8.8.4.4 another server. This resulted in my losing access to my printer via his IP on my browser so I can't undo my actions and my printer always gives the error message when I ask him to scan to e-mail. All other functions work.
    Help, please. Thank you

    Hey @Kybosh,

    Welcome to the Forum from HP Support.

    I understand that you are having connectivity problems with your HP Photosmart e-all-in-one 6520, printer.  I want to help you with this.

    I'm surprised that a manual DNS has interfered with your setup - I think generally it does the opposite and enhances connectivity.  In any case, do not despair!   I have some suggestions that can restore the features of your printer.

    I recommend a fresh start by restoring the default settings of your printer to avoid any persistent configuration problem.  Here's how:

    • Front panel of the printer, press the key
    • Touch tools
    • Touch Restore Factory Defaults
    • * Note that this will reset your settings wireless and webservices.  If you have an address custom ePrint it is deleted permanently.  Click here for more information about setting up a custom address ePrint.

    With your restored default settings, continue on as indicated:

    • Touch the wireless icon ()
    • Run the Wireless Setup Wizard and reconnect to your network (SSID)
    • Enter the wireless password if prompted
    • Once you have created a wireless connectivity, reactivate your webservices/ePrint feature (essential for the use of scan to e-mail)
    • Tap the icon of webservices ()
    • Enable Web services and press OK to enable your printer will automatically update
    • Once completed, it will print a page of information.  If you are looking to complete an ePrint installation, it will be useful later - click here for more information.

    Now, if all goes well you can rebuild your Setup email scan:

    • Tap the scan icon
    • Tap the scan to E-mail
    • Enter your personal email address
    • Retrieve the PIN code of your Inbox
    • Enter the PIN on your requested to complete printer installation

    The above restore the functionality you were missing?

    Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking on the 'Thumbs Up' icon below.

    Please post in the Forum of HP's Support and have a great day!

  • Manually change the lyrics of MP3 in Windows 7

    I've been looking for a way to manually add/edit the words of MP3s in Windows 7. I know that the support for this function (which was present in Windows Media Player 11) has been suspended in the last version of Windows Media Player. I also found some tips on the use of http://www.lyricsplugin.com/ plug-in for Windows Media Player, but even using that, I couldn't find a way to edit the lyrics 'manually'.

    I listen to international music for which a lyric is not usually by using this plug-in automatically, so I really need to "manually" change the words.

    What do you think?

    The Windows Media Player Plus! plug-in adds a new WMP tag editor, which you can use to add words. After you have installed Windows Media Player Plus!, right click on a song you want to add lyrics to, select more tags editor , go to Advanced . Right-click on a label, select Add , and choose WM/lyrics .

    Note that the method above will not integrate the words actually in the MP3 file. To do this, you need to use a tool of external marking as Mp3tag . Tim Baets
    http://www.BM-productions.TK

  • How to manually change the jad arguments

    Hi all

    I have a file .jad with the following line:

    MIDlet-1: myApp,com/myApp/images/icon.png,test_arg

    , where 'test_arg' is a string I want to get back on my method (String [] args) principal.

    I use Eclipse. I try to write "test_arg" on the field "argument Application" on the BlackBerry Application descriptor. After that, I build the project and install it using a real device using OTA, and I get the argument successfully.

    But the problem is: I can't manually change the value of the argument. For example: after generated Eclipse the .jad file, I changed the line above to the following value:

    MIDlet-1: myApp,com/myApp/images/icon.png,this_is_a_new_value

    After that, I downloaded and install the application by using OTA with the help of a real device, but in my main method, I still continue to retrieve the value 'test_arg '! Only it will update the value if I change on eclipse (using the field "argument Application" on the BlackBerry Application descriptor) before you build the project. But... If is not possible to change the value, then why we MIDlet-1 line on the .jad file? Or is it possible?

    Feel free for any suggestions or comments.

    The arguments are integrated in the COD, so change them after that in the JAD file will have no effect.

    This article can help you with the addition of a custom in your JAD file property/string.

    Read the attributes of a JAD file programmatically

    http://supportforums.BlackBerry.com/T5/testing-and-deployment/programmatically-read-the-attributes-o...

  • Windows Photo Viewer - how to change the default Windows Photo Viewer options so it will open the images directly in 'Real size' rather than the auto zoom

    Windows Photo Viewer - full size

    Hello

    Is there a way to change the default Windows Photo Viewer, so it will open the images directly in 'Real size' rather than the auto zoom?

    Thanks in advance, Yoni.

    Hi Yonikl,
     
    1 let me know the format of the file that is causing the problem?
    2. you have any third party photo editing and look at a software installed on your computer?
    3. do you have any recent software or the hardware changes on your computer?
     
    If there is any third party even software uninstall and check if that helps.
     
    You can follow these steps below to set the image at its actual size while watching.
     
    To display the image at its actual size, click actual size . To make the entire image enters the Windows Photo Viewer window, click on adjust to the window.
     
    For more information you can visit this article for assistance below.
     
     
    You can also try to download and install the Windows Live Photo Gallery and check if the problem persists.
     
    If the problem persists then you can try these steps below to create a new user account and check if the problem persists.
     
    Create a new user profile.
    Now you must create a new user account and check the question of do you need to follow the steps
    below.
    a. open user accounts by clicking the Start button.
    b. click Control Panel.
    c. click on user accounts.
    d. family Safety.
    e. click on user accounts.
    f. click on manage another account.
    g. If you are prompted for an administrator password or confirmation.
    h. type the password or provide confirmation.
    i. click on create a new account.
    j.Type the name you want to assign to the user account.
    k.Click an account type.
    l.Click create an account.
    Now search for the question.
     
    If you still face the question, then you can follow the link provided below to fix the damaged user profile.
     

    Thank you, and in what concerns:
    I. Suuresh Kumar - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Database does not start... ALTER database open; change the database open * ERROR at line 1: ORA-03113: end of file on the channel of communication process ID: 10400 Session ID: 418 serial number: 3 -.

    HI during startup of the database of the following errors is. Please help solve the problem.

    SQL > alter database open;

    change the database open * ERROR at line 1: ORA-03113: end of file on the channel of communication process ID: 10400 Session ID: 418 serial number: 3 -.

    ============================================================

    Please see the alerts log entries

    --------------------------------------------------------------------------------------------------------------------------------

    Commissioning:

    Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production

    With the options of partitioning, OLAP, Data Mining and Real Application Testing.

    Using parameters in spfile D:\APP\ADMINISTRATOR\PRODUCT\11.2.0\DBHOME_1\DATABASE\SPFILEATTNDPRD server-side. ORA

    Parameters of the system with default values:

    process = 400

    sessions = 624

    memory_target = 4G

    control_files = 'D:\ORACLE\ORADATA\ATTNDPRD\CONTROLFILE\O1_MF_8LRQYB0M_. CTL.

    control_files = 'C:\ORACLE\ORADATA\ATTNDPRD\CONTROLFILE\O1_MF_8LRQYB13_. CTL.

    DB_BLOCK_SIZE = 8192

    compatible = "11.2.0.0.0."

    log_archive_format = "ARC%S_%R.%T."

    db_create_file_dest = 'D:\oracle\oradata. '

    db_create_online_log_dest_1 = "D:\oracle\oradata".

    db_create_online_log_dest_2 = "C:\oracle\oradata".

    db_recovery_file_dest = 'C:\oracle\oradata\flash_area. '

    db_recovery_file_dest_size = 8G

    undo_tablespace = 'UNDOTBS1.

    Remote_login_passwordfile = "EXCLUSIVE."

    db_domain = «»

    dispatchers = "(PROTOCOL=TCP) (SERVICE = ATTNDPRDXDB)" "

    audit_file_dest = "D:\APP\ADMINISTRATOR\ADMIN\ATTNDPRD\ADUMP".

    AUDIT_TRAIL = 'DB '.

    db_name = "ATTNDPRD".

    open_cursors = 300

    diagnostic_dest = "D:\APP\ADMINISTRATOR".

    Sun 24 May 13:43:09 2015

    PMON started with pid = 2, OS id = 5792

    Sun 24 May 13:43:09 2015

    VKTM started with pid = 3, OS id = 6500 high priority

    VKTM clocked at (10) precision of milliseconds with DBRM quantum (100) ms

    Sun 24 May 13:43:09 2015

    GEN0 started with pid = 4, OS id = 13072

    Sun 24 May 13:43:09 2015

    DIAG started with pid = 5, OS id = 1424

    Sun 24 May 13:43:09 2015

    DBRM started with pid = 6, OS id = 8240

    Sun 24 May 13:43:09 2015

    PSP0 started with pid = 7, OS id = 2980

    Sun 24 May 13:43:09 2015

    DIA0 started with pid = 8, OS id = 12956

    Sun 24 May 13:43:09 2015

    MA started with pid = 9, OS id = 13356

    Sun 24 May 13:43:09 2015

    DBW0 started with pid = 10, OS id = 14248

    Sun 24 May 13:43:09 2015

    DBW1 started with pid = 11, OS id = 17900

    Sun 24 May 13:43:09 2015

    LGWR started with pid = 12, OS id = 5564

    Sun 24 May 13:43:09 2015

    CKPT started with pid = 13, OS id = 16736

    Sun 24 May 13:43:09 2015

    SMON started with pid = 14, OS id = 14068

    Sun 24 May 13:43:09 2015

    RECCE has started with pid = 15, OS id = 16288

    Sun 24 May 13:43:09 2015

    MMON started with pid = 16, OS id = 10884

    commissioning 1 dispatcher (s) for '(ADDRESS =(PARTIAL=YES) (PROTOCOL = TCP))' network address...

    commissioning or shared server 1...

    Environment ORACLE_BASE = D:\app\Administrator

    Sun 24 May 13:43:09 2015

    ALTER DATABASE MOUNT

    Sun 24 May 13:43:09 2015

    MMNL started with pid = 17, OS id = 16128

    Mount of redo thread 1, with mount id 3325657453

    Database mounted in exclusive Mode

    Disabled lost write protect

    Completed: ALTER DATABASE MOUNT

    Sun 24 May 13:43:23 2015

    change the database open

    Sun 24 May 13:43:23 2015

    LGWR: FROM PROCESS ARCH

    Sun 24 May 13:43:23 2015

    Arc0 started with pid = 21, OS id = 10084

    Arc0: Started archiving

    LGWR: FROM PROCESS ARCH COMPLETE

    ARC0: FROM PROCESS ARCH

    Sun 24 May 13:43:24 2015

    Arc1 started with pid = 22, OS id = 18400

    Sun 24 May 13:43:24 2015

    ARC2 started with pid = 23, OS id = 17280

    Arc1: Started archiving

    ARC2: Started archiving

    Arc1: become the "no FAL' ARCH

    Arc1: become the "no SRL" ARCH

    ARC2: Become the heartbeat ARCH

    Errors in the d:\app\administrator\diag\rdbms\attndprd\attndprd\trace\attndprd_ora_10400.trc file:

    ORA-19815: WARNING: db_recovery_file_dest_size 8589934592 bytes is 100.00% used and has 0 bytes remaining available.

    ************************************************************************

    You have choice to free up space in the recovery area:

    1 consider changing STRATEGY OF RETENTION of RMAN. If you are using Data Guard

    then consider changing POLICY of DELETE ARCHIVELOG RMAN.

    2 back up files on a tertiary device such as a tape with RMAN

    SAFEGUARDING RECOVERY AREA command.

    3. Add space drive and increase the db_recovery_file_dest_size setting to

    reflect the new space.

    4 remove the unnecessary files using the RMAN DELETE command. If a service

    the system control has been used to remove the files, and then use the RMAN DUPLICATION and

    Commands DELETE has EXPIRED.

    ************************************************************************

    Errors in the d:\app\administrator\diag\rdbms\attndprd\attndprd\trace\attndprd_ora_10400.trc file:

    ORA-19809: limit exceeded for file recovery

    ORA-19804: cannot recover disk 44571136 bytes limit 8589934592 space

    ARCH: 19809 error creating archive log file to ' C:\ORACLE\ORADATA\FLASH_AREA\ATTNDPRD\ARCHIVELOG\2015_05_24\O1_MF_1_10343_%U_. ARC'

    Errors in the d:\app\administrator\diag\rdbms\attndprd\attndprd\trace\attndprd_ora_10400.trc file:

    ORA-16038: log 2 # 10343 sequence can be archived

    ORA-19809: limit exceeded for file recovery

    ORA-00312: wire 2 1 online journal: ' D:\ORACLE\ORADATA\ATTNDPRD\ONLINELOG\O1_MF_2_8LRQYD8B_. JOURNAL"

    ORA-00312: wire 2 1 online journal: ' C:\ORACLE\ORADATA\ATTNDPRD\ONLINELOG\O1_MF_2_8LRQYDF6_. JOURNAL"

    USER (ospid: 10400): put an end to litigation because of the error 16038

    Sun 24 May 13:43:24 2015

    ARC3 started with pid = 24, OS id = 2188

    Errors in the d:\app\administrator\diag\rdbms\attndprd\attndprd\trace\attndprd_arc2_17280.trc file:

    ORA-19815: WARNING: db_recovery_file_dest_size 8589934592 bytes is 100.00% used and has 0 bytes remaining available.

    ************************************************************************

    You have choice to free up space in the recovery area:

    1 consider changing STRATEGY OF RETENTION of RMAN. If you are using Data Guard

    then consider changing POLICY of DELETE ARCHIVELOG RMAN.

    2 back up files on a tertiary device such as a tape with RMAN

    SAFEGUARDING RECOVERY AREA command.

    3. Add space drive and increase the db_recovery_file_dest_size setting to

    reflect the new space.

    4 remove the unnecessary files using the RMAN DELETE command. If a service

    the system control has been used to remove the files, and then use the RMAN DUPLICATION and

    Commands DELETE has EXPIRED.

    ************************************************************************

    Instance of stopped by USER, pid = 10400

    --------------------------------------------------------------------------------------------------------------------------

    Regarding

    Ngoyi

    Hello

    Now it works very well... with following

    --------------------------------------------------

    using sqlplus

    • Startup mount
    • ALTER database noarchivelog;
    • ALTER database open;

    -------------------------------------------------------------------------------

    Concerning

    Ngoyi

    -------------------------------------------------

  • Manually change the result of the calculation

    I have a form that I want to be able to manually change the answer to the calculation. The goal is to accept a value calculated, unless the user enters a different value in the calculated field. The calculated value will usually be the desired value, but not always.

    I was almost able to achieve using several fields (that I have that knowledge base of javascript), but there is just one problem where a value appears only a touch later. I know not yet why, as the other field is fine.

    I have attached the form using: https://dl.dropboxusercontent.com/u/11052710/Adobe%20Acrobat/Overriding%20LVEF.pdf

    Hello.

    This topic answers the same question: http://abracadabrapdf.net/forum/index.php/topic, 3009.0.html

    You can download the sample PDF content in the 4th answer here: http://abracadabrapdf.net/forum/index.php?action=dlattach;topic=3009.0;attach=2506

  • How to manually change the ports for HTTP on the server vCenter Server

    Hello Experts,

    We have Windows Server 2008 SP2 machine where we v5.1 installed with other SSO components, inventory services, vCenter Server and Update Manager.

    So we went from SSO, the inventory services and vCenter Server fine however, vCenter Server has stopped working. While we were to modernize SSO, the service could not start after the upgrade and the recd suite error "Service VMware KDC service could start.". So, we found the article on the VMware site that said port 88 to cause the problem. To find out more by using the netstat command, we found vpxd.exe used port 88. That is why, we stopped this service and proceeded to the upgrade of the SSO. The upgrade is complete following the inventory service and vCenter Server. While we were upgrading vCenter Server, we found that port 88 was used for HTTP communication.

    So we wasted on the use of the port. The upgrade has been completed successfully, however, we can not connect to vCenter server using vSphere Client version 5.1 or 5.5. We even tried to start the VMware VirtualCenter server using the services.msc console and it failed.

    So we assume the port changes happened during upgrade of the SSO meets the HTTP port by vCenter server usage. We need help on how to manually change the ports for HTTP on the vCenter server.

    Suggestions forward. This problem is with the production servers.

    Thank you

    Karan

    This has been resolved... port has been changed manually and works very well.

  • CS6 on a pc.  Cannot change the resolution on photo downloaded from my Android phone.  What should do?

    CS6 on a pc.  Cannot change the resolution on photo downloaded from my Android phone.  What should do?

    You should find the forum for any product it is and post your questions there.

    Here is a link to a page that provides links to all of the Adobe forums...

    The Forum links page: https://forums.adobe.com/welcome

  • How can I change the sequence of photos in slide shows (especially full frame)?

    I am a beginner of the use of muse.  I don't know how I can change the sequence of photos in slideshows?

    2 ways:

    1. display temporarily thumbnails and drag them to the right place.

    2. open the layers panel, activate the slide show, click on the magnifying glass at the bottom of the layers panel to locate the slideshow widget. Drag the photo entries in the place you want.

  • How to change the database metadata after OIM/OAM installed?

    Hello world

    To change the database/schema of metadata for our installation OIM/OAM.

    What I intend to do is:

    1. create the new db

    2. run the RCU for the OID and OAM utility.

    3. change the connection pool data source in the Weblogic OAM console.

    Is there anything else I need to do?

    I know, there was a connection to the database when I created the home field of the OID (via config.sh). I tried to run this script config again, but could not find a way to change the domain, nor I see how do in one of the consoles (much).

    Any help appreciated!
    D

    for OID, updated if necessary tnsnames.ora and data sources

    OAM, update data sources.

    For IOM, consult this section docID 1359656.1: configuration of JDBC connection of IOM in metalink demand side.

Maybe you are looking for

  • Scanning with Paint in Windows 8

    Hello everyone Here's a video that shows how you can scan with Microsoft Paint in Windows 8. Sometimes your scanning software may not work, or your printer may not have a print driver basis. If Yes, you can use Microsoft Paint to scan. Scan using MS

  • Can someone convert these LV 5.1 drivers. to LV8.6?

    I would be very grateful. Thank you! d

  • a problem

    Hello everyone When I want to install windows server 2012 x 64 in vmware 10, I faced with this error: i ' v run win 8.1 x 64 and my Matthew is lenovo g510. I need server in my vm, please help me, if you can. I thank.

  • Computer clock keeps time

    Why my computer clock will not keep the right time?, I have continually put wright through "change date and time" in the control panel.  I have Vista Home Premium

  • Microsoft Bluetrack desktop wireless 5000

    We had our two laptops stolen in our home yesterday with bluetrack dongles from USB ports. We have now two desktops without dongles. You can get the dongles separately or are particularly well matched and non programmable?