Manually delete snapshots?

Similar Questions

• Error when you try to delete snapshots

  Hello

  I have problems when you try to manually delete snapshots of our ReadyNAS. The error is displayed when it fails is 28004020002. After a search through your forums it seems most of the time you ask newspapers, and then it seems that the problem is solved. So if need be I have newspapers available on request.

  One of the suggestions also says try a defrag on the device and that pops up and displays a different error message: 14007010000. I don't know if that is related, but I have not dug deep in this one I would like to help with the first issue first please

  All comments are greatly appreciated.

  This is the topic I was looking at early to try to help with my problem.

  https://community.NETGEAR.com/T5/backing-up-to-your-ReadyNAS/error-when-trying-to-delete-snapshot/TD...

  Fixed.

  Please do not restart the system until the balance is over. The balance will take time to complete.

  You can see the progress made in the web administration interface.

  In addition, you can plan a balance to say run every 2-3 weeks.

• Reasons for SLOW create / delete snapshots

  Hello

  We run 5.1 ESXi hosts in a cluster.

  We have added a number of virtual machines to the cluster, and so the use of the memory of each ESXi host is about 60%.  Network administrator also performs a network change lately (he said it shouldn't affect VMWare).

  However, it takes much more time for us to create / delete snapshot.  Wonder if it may be due to network problem OR just we are running out of memory in ESXi hosts / SAN Performance?

  Your opinion is requested.

  Hello

  Before we dive more deep, the main issue here - what is was exactly the scope of this network change? It seems that something has changed on the network affecting the connection between ESXi host & network storage interfaces shared. Also, you must ensure that change did not affect VAAI availability on your space of storage as well as snapshots are handled directly on the drive bays. A delta disc is created, the basic disk is read-only and all writes are then carried out on delta drive. The snapshot delete commits these changes. But of course, you should check your SAN performance if it does not hit the bottleneck by chance (CPU, memory, input/output).

  If you get the information on what has changed, we can help you further.

• Host of hard drive is full - need to delete snapshots

  Hello

  I try to help someone who has a Mac running Windows 7 64 bit Pro using VMware Fusion 5.0.3.  They have a hard disk of 1 TB but now only 725 MB of free space!

  I checked the settings of VMware and they had AutoProtect Snapshots on 1 dollar a day, and set "maximum number of snapshots to keep: ' 3.

  When you view the instant history, it shows that there are 51 snapshots with the first (oldest) being 55.4 GB, GB 8.7 second and third 958,3 MB.  There is also a second tree that has only one sheet about 20 shots later.

  What is the best way to remove these pictures I saw barley have any storage space.

  I also don't mind not completely destroy all snapshots and new.

  Thanks in advance!

  haachee wrote: I'm not afraid also completely destroy all snapshots and new.

  What do you mean exactly by that?

  What is the best way to remove these pictures I saw barley have any storage space.

  With this little space it is really not that you can do with this package of Virtual Machine on this disk is almost full for correctly * clean. * Properly, i.e. delete snapshots via the Snapshot Manager.  You must either release the right amount of space needed to accomplish the task or temporarily move the package of Virtual Machine to another disk that has the amount of space needed for the appropriate task.

  There are other options, but I guess that when you answer the question I asked can I give more details.

  BTW DO NOT try a whole instant deletion via the snapshot to manage with so littk of free space on the disk of the host that you will break it doing!

• When to delete snapshots in parent pool view image

  Hi all

  Some of our master images for our pools have a lot of photos and I want to clean them. The problem is, last time I deleted a snapshot on a master image that someone in the pool had disconnected from non-persistent desktop before I had time to recompose the pool and when that office is to refresh it failed (because the snapshot, I removed was in the path of snapshots to the snapshot pool was built out of). Not only he made the effect each Office update in this pool, the error stopped the View Composer vCenter Server server then NO more desktops in any pool could not be refreshed.

  So, my question is... What is the mechanism for deleting snapshots in a pool?

  Thank you

  You should not disable the pool.  Just disable commissioning of the pool.  In this way the opportunity to recompose do kick in while you do your work on the parent.  When you are finished, you can enable and then commissioning on the pool again.

  

• How to create an effective script that mass deletes snapshots

  our company is currently using a product that drives the operating system and software updates for our virtual machines and takes a snapshot before pushing updates in case something breaks. the problem is that the same software does not remove the pictures until next update button and you're just too long we wait with snapshots lying around. what I did to remedy this situation is I built the below script and configured it as a task.

  # Add the snap-snap powercli in
  Add-PSSnapin VMware.VimAutomation.Core

  # Connect to an instance of vCenter
  $strviserver = "vCenterServer".
  SE connect-VIServer $strviserver

  # Get all of the snapshots for each virtual machine in the vcenter, then delete them
  Get - VM | Get-Snapshot - name "updates" | Remove-Snapshot - confirm: $false

  # Remove the snap-snap powercli in
  Remove-PSSnapin VMware.VimAutomation.Core

  It works, but it is not nearly as effective as I wish it were. Essentially, the script currently removes a snapshot at a time right now. I want so he can find any snapshot on this server vcenter by the same specified name and submit the task deletion-Snapshot for each snapshot at the same time. This should cause a lot of tasks to try and tail. The effective result would be that vCenter will treat all instant destruction because it has resources to do in a given time and will address the queue there resources.  If someone can tell me how to do this or something better, I would really appreciate it! Thanks in advance!

  You can consider using the RunAsync switch on the cmdlet Remove-Snapshot .

  In this way, that the script will continue while delete the snapshot is still running.

  Note that there is obviously that a limit on how many parallel snapshot removes that may occur due to the resources available.

• Problem deleting snapshot via PowerCLI

  I can see the snapshot via command line, but not through the vSphere Client.

  Cannot remove Instant said.

  > Get - VM | Get-Snapshot | Select the virtual machine, created name

  VM                         Name                                 Created

  sp3vtst Scheduled_Snapshot 11/06/2013 16:35:08

  Impossible to remove it:

  > Remove-Snapshot - Snapshot $Scheduled_Snapshot

  Remove-Snapshot: failed to validate the argument on the parameter "snapshot." The

  argument is null. Supply a non-null argument, and try the command again.

  On line: 1 char: 27

  + Delete-Snapshot - Snapshot $Scheduled_Snapshot

  +                           ~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: InvalidData: (:)) [delete-screenshot], ParameterBin)

  dingValidationException

  + FullyQualifiedErrorId: ParameterArgumentValidationError, VMware.VimAutom

  ation.ViCore.Cmdlets.Commands.RemoveSnapshot

  Of course, IE my my $Scheduled_Snapshot setting is incorrect.

  I tried without the $, between single quotes and double, na - da

  As I said, I'm not in the client.  Could be false information of the command Get - VM?

  I tried to delete the virtual machine to inventory, time, create a snapshot and remove all of the customer.  Don't know what to try next.

  I have installation jobs to take pictures before the updates of Windows.  Now I would like to delete them via PowerCLI.

  Thank you

  D

  Try it like this

  Get-VM-name sp3vtst | Get-Snapshot - name 'Scheduled_Snapshot ' | Remove-Snapshot - confirm: $false

• Error running VDR: Trouble reading files, error-3942 (delete Snapshot failed)

  Hello

  I currently have a problem with my VDR backups. as indicated in the title, the error I get is "error running VDR: Trouble reading files, error-3942 (delete Snapshot failed)".

  Background

  We are currently running VMware Vsphere version 4.0.0 on VDR version 1.1.0.707. We have a task of backup running in Vsphere that takes a snapshot of every night of the VM. It is then wrapped on tape for the archive.

  Question

  All of the virtual machine is backup successfully except one. I get the error message is as above: "error running VDR: Trouble reading files, error-3942 (delete Snapshot failed)".

  The backup task completed successfully, and the virtual machine can be restored from a backup. However, the virtual machine always has a snapshot and in addition, the virtual disk to the virtual machine is still attached to the host.

  The current will of this issue that we use is:

  (1) stop the VDR Server

  (2) remove the attached hard disk

  (3) to take a snapshot of the virtual machine

  (4) delete all snapshots.

  I would like to find a solution to the underlying cause, as the current will is tedious and time consuming.

  Another note, the logic unit number that the virtual machine is currently has a block size of 2 MB while all other virtual machines have a block size of 1 MB...

  If you need any additional info, feel free to ask.

  See you soon,.

  http://www.VMware.com/support/VDR/doc/vdr_120_releasenotes.html#upgrade

• Instant VMDK files do not delete after deleting snapshots

  Hi - I have a server SLES/OES2 with two discs - 75 and 750 GB.  I deleted a few shots after that test app and I'm back to instant No.  The data store always shows two files VMDK - server_1 - 000001.vmdk (17 GB) and server_1 - 000002.vmdk (56 GB).  The second is still active in this sound change timestamp.

  This is the last section of the VMX file:

  debugStub.linuxOffsets = "0x2d1ac, 0xffffffff, 0 x 0 0 x 0, 0xc58223b, 0x0, 0xc582254, 0x0, 0x2d1a8, 0 x 0 0 x 0 0 x 0, 0xc58226c, 0 x 0"

  scsi0:1.filename = "SSS-SLES-TEST_1 - 000002.vmdk.

  scsi0:1.mode = "persistent".

  scsi0:1.ctkEnabled = "FALSE".

  scsi0:1.DeviceType = "scsi-disk" hard

  scsi0:1.present = 'TRUE '.

  scsi0:1.redo = «»

  I got 32 GB free in the data store until I deleted snapshots, then he went to 0 GB free!  I deleted ISO files, and now it's up to 3.7 GB free. The total data store is 1.36 TB

  There were not errors when deleting sanpshot - although it took awhile.

  All this started because I had forgotten that this VM had snapshots and I started to copy the data to the server and got a warning that server_1 - 000001.vmdk was full and remove the space.

  I don't think that the virtual machine is healthy!  Any suggestions?

  Thank you

  You can try to power down the virtual machine, taking another cliché and with a bit of luck the entire tree of the snapshot will be detected. After that, keep the VM down and try to delete all snapshots.

  http://KB.VMware.com/kb/1002310 also have relevant information and instructions, you can follow.

  Marcelo Soares

  VMWare Certified Professional 310/410

  Technical Support Engineer

  Globant Argentina

  Review the allocation of points for "useful" or "right" answers.

• Delete snapshots by using data from a csv file

  I have a csv file that was exported in the form of:

  VM

  SERV1

  serv2

  SERV3

  (The file name is snaps4.csv)

  I want to delete the associated clichés a vm in this file csv; However I can't get anything to work.  Is the closest I've come by manually removing the header in the csv file (i.e. VM) then using the get-content command.

  $vms = get-Content C:\scripts\Output\snaps.csv

  Get-Snapshot - $vms vm | Remove-Snapshot - RemoveChildren-confirm: $false

  The above command works, but I have to remove the header first (which I am fine with, if I do this, but I'm trying to automate this process for people of our operations and have a manual step is not ideal).

  Someone help me?  I know I'm missing just something simple here, but can't understand it.

  
  

  Have you tried it?

  Import-Csv C:\scripts\Output\snaps.csv | %{

  Get-Snapshot - vm $_. VM | Remove-Snapshot - RemoveChildren-confirm: $false

  }

• Problem deleting snapshots

  I tried to make my smaller Windows XP VM for about a week now. I was scanning through many forums, have almost tried everything.

  The problem started when the main player of the Mac started to get tight on space. I used the disk inventory X to see what has been filling the disk and saw that my Windows XP VM, which has only one virtual disk of 40 GB, was about 87 GB. I opened the pacckage and there are 37 games of vmdk files.

  I did most of my tinkering on a copy of the virtual machine (had to buy an external hard drive, I so had the space to do!) but I had a few initial changes if the GUI on the original virtual machine.

  I tried to remove some of the snapshots (a combination of manual and auto-protect instant) but I kept getting the error "there was an error while trying to delete the snapshot. "Impossible to clean deleted files: the specified virtual disk needs to be repaired. The snapshot disappear if GUI.

  Instant MISTLETOE does currently show no snapshots, but the settings / Hard Disk sectionsays I can't do anything on the drive because there are snapshots. Can I take a new snapshot with success but when I remove it I get the error message above.

  I looked at the file .vmsd using a text editor, and it seems that it might be damaged. He registered 12 snapshots, and many of them have the same UID and refer to the same file. I saw an ad or KB article forum who suggested deleting the file .vmsd and let VMWare re-create it, but again, I can't take a snapshot, then delete it with success.

  My last attempt was to follow the steps listed here:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1020000

  When I do this, I am able to do successfully a new virtual disk, but when I start the new machine this drive, I have a computer that is more than a year.

  I move up the chain of the CIDs in the vmdk files, and while they are not in order, they don't seem to have a single linear chain.

  I could really use some help.

  The environment is Mac OS x Leopard, Fusion 2.0

  You always have a copy of the Virtual Machine that is operating normally and has not been modified by your DIY?

  If Yes, I would like to use Paragon go virtual to create a new Virtual Machine from it.  This would be the fastest and easier to solve this problem.

• Using apple mail, I can't manually delete an e-mail w/out move to the trash. Nothing I've tried has had no effect...

  Using apple mail, I can't delete an e-mail with or without manually move it to the trash. Nothing I've tried has had no effect... help!

  You tell us what version of Mail or OS X

  Address postal (Yosemite): delete messages

  Try Mail (El Capitan): rebuild the mailbox

• Say I have use a bookmark to access a web page. Subsequently I have manually delete the reference on historical Panel - also removes the current bookmark. Never happened with vn!

  Sequence of operations leading to the problem:

  !) Existing bookmark to go to the requested web page.
  (2) later, the I delete manually the reference panel historical at this bookmark - command 'delete '.
  Search 3) via the bookmark panel list some time later, I noticed that the bookmark I would have used previously was deleted. I did not went to the Bookmarks panel and deleted explicitly point. The deletion is certainly due to him removing point of reference in the history panel.

  This behavior started recently - and I think with FF for Android exit 31 or 32. Certainly is not happened with versions before clearing the historic bar on historic Panel were introduced. I am now on version 32.0.3

  Question being entered on desktop machine so 'guessed' version info irrelevant, so I've manually entered version info, etc. below...
  

  Thank you, Rob.

  HI dislexic_wobmat,

  It seems that this problem is fixed in the next version of Firefox beta.

• No cookie name appear when I press the button 'Show Cookies', which would prevent me from manually delete cookies selectively.

  When I open the Cookies window by pressing the 'View the Cookies' button in Options | Privacy the secondary window displays no name cookie just a series of arrows as for different subdirectories. This has been so for several months, but I have changed no cookie setting and have the "accept Cookies from sites' and 'Accept third-party cookies' checkboxes are checked.
  This means that I can't manually control/delete cookies.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• What is a Trojan: win32 / alureon, FV and how manually delete it please

  I ran microsoft security scanner, and he partially removed this virus, but also said that it should be deleted manually, help please

  Hello

  This should help you to remove it.

  "How to remove malware belonging to the family Rootkit.Win32.TDSS (aka Tidserv, TDSServ, Alureon)?"

  http://support.Kaspersky.com/FAQ/?QID=208280684

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Also use this method to remove the malware.

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.