Printer print is no longer since unplugging him and by plugging in the USB cable

Similar Questions

• installation a hp deskjet f4480, when I plug in the usb cable, my computer cannot find the printer.

  I have an hp computer, product number NY545AA #ABA, with windows 7, 64-bit and a hp deskjet F4480 printer. During the installation of the printer, I get to the screen that you can plug USB cord say printers and after about 2 minutes. It says no device found. The USB cord is plugged into the printer and the computer, the printer is on. Finally, I have checked, add a device later. I fight the computer and printer together, about 3 years, the printer never worked. I have downloaded new software and the HP driver for my printer, 1 week ago, it did not help.

  Try to use the other USB cable

• Printer problem - after changing the cartridge, I get a message that the USB cable is not connected

  As above. I checked the USB port and it is connected.

  Original title: printer problem. After changing the cartridge, I get a message that the USB cable is not connected?

  Hello

  1. you receive an error message/code when you try to print?

  2. What is the serial number and model of the printer?
   
  Follow the steps.
   
  Method 1
  Run the hardware and devices Troubleshooter
  This utility checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Also run convenience store Print that would help us diagnose the problem better
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2

  (a) check the physical connection of the printer and make sure that the USB cable is properly plugged.

  (b) connect the printer to a different USB port and check if it helps.

  (c) check the on another computer.

  Method 3

  Run the fix - it tool from the link.

  Diagnose and automatically fix problems printing and printer http://support.Microsoft.com/mats/printing_problems/

  Method 4
  If the previous step fails, follow the steps described in the following link:
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
   
   
  Let us know if it helps.

• I have; ve reinstalled the software, wireless, everything went through fine. He asked me to remove the USB cable while it printed a test page. But he does not accept printing orders

  I have; ve reinstalled the software, wireless, everything went through fine. He asked me to remove the USB cable while it printed a test page.  But he does not accept printing orders - printer offline.  Very frustrating!

  So, you have a problem with Picasa. You should contact them.

  I also quite what your note 'Wireless' has to do with the question. Maybe it's because you have yet to provide a lot of information...

• then I get the installation software for printer lexmark 5650 has failed the windows logo test, then @usb or ethernet point during installation it won't end up as I run the usb cable

  When you install the software for lexmark printer 5650 to test the logo point to install windows, then @usb or ethernet I can't complete install because it will not recognize the usb cable

  Hi Spudly49.

  Thanks for posting. You are using an OS 32-bit or 64-bit?

  If you use a 32 bit OS, please download and run the driver located here. http://support.Lexmark.com/index?page=content&ProductCode=LEXMARK_X5650&ACTP=product&ID=DR2226&segment=support&UserLocale=en_US&locale=en

  If you are using a 64 bit OS, please download and run the driver located here. http://support.Lexmark.com/index?page=content&ProductCode=LEXMARK_X5650&ACTP=product&ID=DR3915&segment=support&UserLocale=en_US&locale=en

  I hope this helps! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Camera is not available because the SD card is mounted on a PC. Unplug the USB cable to move forward.

  I tried to download pictures from my phone.  She does not quite sure why, but the main problem is I can't access my camera or the photos on my phone now.  I get messages like this:- camera is not available because the SD card is mounted on a PC.  Unplug the USB cable from proceed.  I have tried several things and finally just manually disconnected the cable, but not luck. and now also message as follows:- your content is not available because your phone is used as a USB storage device.   Disconnect the USB to access your content.  Would appreciate help!

  Hello

  1. What is the brand and model of the phone?

  2. have you been able to access (or discovered) files on the computer?

  3. what error do you get when you try to copy files to the computer?

  4 you did changes to the computer, before the show?

  Method 1:

  Check out the following link.

  Tips for solving problems of USB devices

  Method 2:

  Connect the phone to another computer and check.

  Method 3:

  Check if the phone includes settings to disable the USB connection.

• Is it possible to set up a printer wireless without the USB cable?

  Hello

  I have a HP Photosmart C4580 and I wanted to set up to run on a network, but I don't have a USB cable. I tried to install it without one, but it does not appear on the network, and I was wondering if you really need a USB cable to install it?

  Thank you.

  1. turn Radio on wireless to the printer.

  2. on your computer, search for all available wireless networks. You should find a named "hpsetup". Go ahead and connect to this network and ignore all warnings.

  3. wait 1 minute after have connected you to the network. Then, print a network of the printer Configuration Page. It should list an IP beginning with 169.254.x.x.

  4. type this address in the address bar of any web browser. You will reach the Embedded Server (EWS) Web of the printer.

  5 use the Wireless\Networking tab at the top and looking for an option to ' 802.11 wireless networks. On this page, you will be able to enter your network settings wireless (screenshot attached to facilitate their identification).

  6. make sure that you change the SSID for your network name. Click on the option button 'Infrastructure' and enter your WEP\WPA pasphrase. ENTER THE SSID AND PASSWORD EXACTLY AS IT IS, OR IT CANNOT CONNECT TO THE NETWORK.

  7. click on the button to apply and wait for the confirmation of the parameters being recorded.

  8 restart the printer. Once again the Config network printer page. Now, it must have a such IP assigned by your router and not with 169.254.x.x.

• Connect the USB cable on my 5510e-all-in-one wireless HP Photosmart printer

  Need me 15 minutes to print a page using my network wireless at home. I decided to connect the printer with a USB cable, but the installation of HP - written installation guide - instructions only show the USB wireless method. I already bought a SPEAKER cable so I'm readt to go one time that I get help. My laptop, that I intend to connect is a dp4 Pavilion from HP with Vista. Thank you.

  Hi there billham68 and welcome to the printer HP consumer Forums.

  Here is a link that should help you in the accomplishment of the task at hand.

  Installation of the software of the printer in Windows for a USB cable connection

  http://support.HP.com/us-en/document/c03521864

• Printer has stopped printing on 64-bit Windows 7 HP Probook computer laptop using the USB connection.

  I recently bought a HP Probook and connected the laptop to an old but very faithful computer HP Laserjet 5 p. The HP Probook uses a Windows 7 64-bit operating system. The printer is connected to one of the USB ports on the laptop.

  Printing worked fine until yesterday. To my knowledge, no update of the operating system took place. I tried change usb port, remove and reinstall the driver package, start and stop of the spool printing, deleting the temporary files in spool it print without result. When I click on print a Test Page, it seems to go to the printer, but is located in the coil. I also ran Print Microsoft FixIt which can't find any problem apart from the removal of the queue.

  To check the cable, I plugged the printer on an old Vista HP Pavilion laptop and no problem printing.

  I'm at a loss what to try next and would therefore appreciate all thoughts.

  Thank you.

  How have you tried to uninstall the printer?

  Here are some ways you can do it.

  1. go to the Start Menu

  2. all programs

  3 file HP

  4. choose the name of the printer

  5 down to uninstall.

  Another way to check if it is deleted.

  1. click on Start Menu

  2. type in the Device Manager in the search bar

  3. in devices, look under the tabs, IMAGE Manager and DEVICES, PRINTERS and another tab that could involve the printer.

  4. If he's there, RIGHT CLICK and uninstall.

• can I use my wireless printer if it is connected to the main computer with the USB cable?

  My main computer runs XP Professional and is not wireless capable (that I know), my laptop running Windows 7 is wifi enabled, it can independently connect to the internet and printer (Photosmart 5510) is wifi capable but that is currently connected to the main computer with a USB cable.

  My question: can I use the printer to the host computer by USB and computer laptop through wireless?  If yes how to configure connections? Thank you.

  Hello

  A small wifi Wireless USB on the XP machine should work just fine. You can OpenOffice.org printer to two computers wireless. I don't think that a machine can access the printer if you plan to use the USB connection or wireless. I have not tried yet, maybe next weekend.

  Kind regards

• LaserJet P1102w: Printer 'offline' since the upgrade to El Capitan on MacBook Air - using the USB cable connection to print

  Updated the MACBook Air to OS X 10.11.4 El Capitan.  In this process, my printer disappeared.  Apple support had to intervene to get the printer view and print - that was yesterday & took 1.5 hrs.  Today, I tried printing and get the error "offline."  I went through the steps of unplugging the printer and Router 2 x, but always 'offline' message.  Help please!

  Hey @mel1121,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with your Mac OSX 10.11 for the Laserjet P1102w printer machine printing. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. On your Mac, click on your Apple icon, system preferences and printers and Scanners.
  2. Hold down the CTRL key and click the icon of your printer on the left.
  3. Click on reset printing system.
  4. Click on the button "+" in the lower left corner of the screen.
  5. Select your printer from the list.
  6. Click in the box next to and select your printer from the list.
  7. Click on Add.

  Please let me know the results after following the above. If you are able to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

   

• Kodak in a 2150 does not print wireless. compatible with the usb cable. Help

  My printer prints not my lap top. It works already. I uninstalled the program and reinstalled and it still does not print. I turned off the printer for a minute and I turned my router for a minute and they turned back. I don't know what else to do. Help, please.

  See if it helps:

  Lost on printer all-in-one Wi - Fi
  http://support.en.kodak.com/app/answers/detail/A_ID/2741/selected/true

  The guests to answer and follow the troubleshooting.

• hardrive takes a long time to start and stop, root for the virus scan, none found

  works fine in the morning, afternoon, it can take up to 5 minutes to start, currently 3000 yards from a cell tower, it can take just as long to stop it, what is a hard drive problem or the computer something about 2 years, laptop

  Hello

  1. which version of the operating system is installed on the computer?

  If you use Windows 7, try the methods below and check if the problem persists.

  Method 1:

  Perform the disk check to check and fix bad sectors on the hard disk.

  Check a drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Note:

  Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Method 2:

  Download and run a full scan of the system using Microsoft Safety Scanner to detect any problem related to the Virus/Malware.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:

  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Help, please. Not detected HP Desktop F4500 wireless printer same w/a usb cable

  My wireless printer has a mind of its own. When I got it, it printed... wireless. My router freaked out & did not work, so I unplugged my router & used my dsl cable to my laptop to connect. I tried to plug the usb cable from my printer to my laptop so I can use it & it didn't work. I brought my printer at the show & restarted my laptop... it worked w / the USB for a day. I got a new router and now my printer is not working yet. RAWR! Help, please. I don't know what to do. It is not work w / or w/o a cable. I've restarted both, but nothing. Thank you all ;-D

  Unplug the USB cable from the laptop, then remove the icons of printer to the printer from your laptop too. Now click on the Menu start > all programs > HP > HP Deskjet F4500 > add a device. Now follow the instructions to reconfigure the printer to connect to your new network. You must connect the USB cable between the laptop and printer ONLY when you are prompted to do so and not before it.

• HP P1102W does not print and does not open when it is connected through the USB port on the road

  I bought this printer and I set it with a fixed IP address. After a few months, he has simply stopped working. So I decided to connect to the console and I wasn't able to do it either. I printed the test page and the ip address is 0.0.0.0. I, then, tried to plug in the USB cable on my computer and the drive that contains the software, it does not appear. He is a second and then disappears.

  I would like to get a solution to this problem before I throw this piece of 'material' on the discharge.

  Thank you!

  The 1102W uses what is called USB wireless.  The installation of the printer is the only way to recover the printer on a network in this case.  There is no place to set the IP address without getting a DHCP address first, which is not the case here.

  First, retrieve the default network printer.

  Restore the default wireless settings.
  a. turn off the product.
  b. press and hold the wireless switch and the
  Cancel button and then turn on the product.
  c. hold the button until all lights flash in unison.
  and then release the keys.

  This should reset the default settings of the network.

  Then, uninstall all the software of the computer printer.

  Reinstall the printer from here click on software and Driver Downloads and select your operating system.

  It will take a computer on the same network and USB cable.  Click network installation and connect the USB cable when prompted.