Error when you try to delete snapshots

Similar Questions

• Windows Mail for Vista - error when you try to delete e-mail messages

  When you try to delete all the emails in the in the folder, a message "error" appears, it is impossible to delete messages after choosing 'select all '.

  Try to compact and repair the database with this tool.

  WMUtil
  http://www.oehelp.com/WMUtil/default.aspx

• Error - when you try to delete a file and re - install a program

  Can someone help me pls? A program has stopped working for me, so I tried to remove and reinstall and I'm having no luck.

  I don't see any more on Add/Remove Programs, but when I look under C/program files, I still see the folder here. When I try to delete the folder, I get an error ' cannot delete r2.bmp: data error (cyclic redundancy check). "

  When you try to download this same program again, it says "Setup encountered a disk write error. Please ensure that all other applications are closed before starting the installation. In addition, ensure that the destination drive has enough space and that you have the necessary access rights. "For starters, I havve nothing else open. Shows user accounts I have "administrator rights."

  I'm stuck here, without being able to delete the folder or download again. I'm new to computers (wish I knew more). I watched how do I know which system I have and I have XP.

  Can any of you help me pls?

  Cyclic Redundancy Check (CRC) errors are usually associated with the hard disk errors.  The best first approach to solve this problem is to do a complete check of the disk.  The short version of the procedure to follow is:
  Under "My Computer", right click on the C drive :-> properties-> tools (tab)-> 'Check now'
  Check out the options and 'Start '.  He will complain that it cannot do it now and tell you that it will do so at the next startup.  Accept the warning.
  Restart your computer and let it complete the disk check.

  More info is here:
  "How to perform disk error in Windows XP check"
     <>http://support.Microsoft.com/kb/315265 >

  WARNING: This control is performed before Windows starts, can take two hours or more and can not be interrupted.  Do it when you won't need your computer for awhile.  Also, it would be prudent to update your backups before the race.

  HTH,
  JW

• ODI - 1228 error when you try to delete a table using the procedure

  Hello
  
  I get the following error when I run the procedure. The process has two steps.
  
  Step 1: Drop table (REF_TABLE1 ;) removal
  Step 2: Complete the Table (Insert statements)
  
  ODI-1228: Load_Ref_Roles_Privileges_List (procedure) of the task fails on ORACLE DEVSCHEMA target connection.
  Caused by: java.sql.SQLSyntaxErrorException: ORA-00911: invalid character
  
  CODE: delete from REF_TABLE1;
  
  When I run the same delete statement into a TOAD, it works. Also, if I run it with only step2 it works.
  
  Please notify. Thanks for your time and your help.

  Hello

  Could you try without the *. * ?

  Only

  delete from REF_TABLE1
  

  Kind regards
  JeromeFr

• 0x8007045D error message next there was an I / U error when you try to delete a folder in Minecraft

  I downloaded minecraft on my computer (5000 msi with windows 7 Home Premium) and in my "roaming" folder, another folder is created called ".minecraft" and it is normal. but now I can not remove it and this error code appears "0x8007045D that freezes my PC and I have to restart using the power button." How can I delete the folder!

  Help

  You want to uninstall the program Minecraft?  Have you tried the good uninstall procedure?

  You can delete the folder Mode safe?

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  is dot minecraft the correct name (".minecraft")?  It is a little unusual for a folder name that can explain the problem in itself, you are experiencing.

  131702 cannot delete files or folders with extended characters
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;131702

  If you try to use the BACK and then run it from an elevated command prompt.

  How to start a command prompt in Windows 7 and Vista
  http://www.bleepingcomputer.com/tutorials/Windows-elevated-command-prompt/

• "The action cannot be completed because the file is open in another program" error when you try to delete folders in Windows 7

  I've just updated 5 machines for a client to windows XP Pro to Windows 7 Pro. their data is stored on a server (SBS 2003) and so far, if they wanted to move files or folders or update documents Word / Excel sheets that they could do to will be no problem. What seems to happen now, is that if they try to edit files, then re-save (Word Documents, data sheets Excel etc), they are told the file is in use and changes cannot be saved. We have also upgraded their MS office Pro 2003 to 2010 Small Business but this seems to affect all based not only social files, so for example if I try and move a PDF file from one folder to another I get "file is used and can not be moved / deleted.

  I also have another customer with the same problem, same configuration (positions upgraded Windows XP Pro to Windows 7 Pro) they also have problems with moving / deleting files from the shares on a SBS 2003 Server?

  I checked the server and the files are certainly not open where else?

  Can someone help me on this...

  I also tried the following to see if I can cure the problem:

  I changed the parameters of GP on Small Business SERVER 2003 as follows:

  User configuration - administrative models - Windows components.

  • Click on Windows Explorer.
  • Right click on the entry 'disable caching of thumbnails in the hidden thumbs.db files', then select Edit.
  • Select the parameter.

  like apparently Windows 7 stores files in a Thumbs.db file information & to see if that makes a difference, but still no change.

  It's seriously trying my patience and my clients are now wondering if they have windows XP back!

  Surely theres a fix for this somewhere?

  Should also add that I have disabled offline files that I thought that this may be the cause of the problem, but no change.

  Hello

  Thank you for visiting Microsoft Community.

  The question that you are running in suitable for the forum on the link below:

  http://social.technet.Microsoft.com/forums/

  It will be useful.

• 42 error code when you try to delete the file

  PDF file which can be opened and read.  However, when you try to delete the file, error file not found 42 made its appearance.  MacBook Pro computer

  Please relaunch the Finder , and then try again. If there is no change, restart the computer.

• error message 0 x 80070570 when you try to delete files

  I get this error message when you try to delete files on my hard drive. I would be greatfull if any 1 can help me remove these files.

  Hi Waltergaller,

  1. What is the accurate and complete error message you get?
  2. what files you are trying to delete?

  Method 1: See the link below and follow the steps to remove the file.

  Why can't I delete a file or a folder?

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-cant-I-delete-a-file-or-folder
  
  Method 2: if the steps above did not help, then you can also try to remove the file getting mode without failure. See the link below to start the computer in safe mode.

  Start your computer in Mode safe:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
  
  Method 3: if the step above does not work then, I would say allowing you to run a scan on the Hard drive using the Microsoft Safety Scanner and check if she is infected with the virus.

  You can download and run the Microsoft Safety Scanner from the link provided below.

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: when you do an antivirus online, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.

• Error 0 x 00000709 when you try to delete the print job and/or pritner.

  Original title: error 0 x 00000709.

  I have a dell laptop running windows vista Home premium SP1 with a 64-bit operating system.  I tried to remove a printer HP 1310 on my computer and it is stuck on "suppression of 1", I stop, then restart the printer spooler and now I have error 0 x 00000709 when you try to delete the print job and/or pritner.   What can I do to remove this printer.   I installed a Canon MX330 printer, but due to the printer HP being locked, I can't print with a PictBridge compatible printer.

  Hi LauraD,

  You can try to remove the printer from the safe mode and check.

  Step 1:

  You can read the following article to start in safe mode:

  Start your computer in safe mode

  Step 2: Remove the printer.

  You can read the following article to remove the printer.

  Add or remove a printer

  After deleting the printer, you can start in normal mode and try to install Canon printer.

  Hope this information is useful.

• When you try to delete e-mail messages in Windows Live Mail I get message "an unknown error occurred.

  Original title: "Uknown error has occurred", you can say that again!

  I use Windows 7 Edition home premium. When you try to delete e-mail messages in Windows Live Mail I get the message "an unknown error occurred. This seems to happen only when I want to delete the messages that have already been opened. Can I delete mail unopened very well. I am allowed to remove an open both message. But as I do that a few times to the top appears the message again stop again.

  Hi Rasrick,

  1. you receive with the message error codes?

  You can check out the following link and check if it helps:

  http://windowslivehelp.com/thread.aspx?ThreadId=8255bf0a-05ca-4e63-9c7c-b456e9c3a648

  If this problem occurs only with Windows Live Mail, you can post the question in the Windows Live community:

  http://windowslivehelp.com/product.aspx?ProductID=15

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows XP SP3: Access denied error when you try to change the beginning upward in MS CONFIG. Director of applications but I am the administrator.

  original title: access denied errors when you try to change the beginning upward in xp sr CIP 3 msconfig. I am the administrator, please the administrator

  I am a user with privileges under windows xp pro service PAC 3. I recently received an access denied error message acusing me of not being the administrator when I tried to limit the start up programs in msconfig. What should I do these changes in safe mode?

  You have scanned your system for malware? It seems its infected with something. Download ccleaner install / run. Then go to tools / startup. Delete the entries that you want here

• Error 0 x 00000643 error when you try to install a Kodak wireless printer. When tried to install the wireless printer is located and ready to install, I get a PnPx device then error

  Error 0 x 00000643 error when you try to install a Kodak wireless printer. When tried to install the wireless printer, wireless printer is ready to install I get a PnPx device Microsoft authorization. Runs like it is installing then error is presented. I tried fixit did not work... Frustrated

  You could settle on a previous installation. Try this:

  Go to your device manager and see if you have an old installation of the printer and right click Uninstall. You can also check if there is an old facility of the printer in Control Panel, printers, right click and delete it. Install the printer using the Add Printer Wizard. If it fails again with the same error, go to Device Manager right click on the name of your computer, click on "Scan for harware changes". He must find the printer and install it. Now you can check your printer if its work. If this does not work, please indicate your model of printer on your next reply.

  Open the Device Manager
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

• Loading error when you try to load the Halo 2 "files are missing or damaged in the installation directory. A few important files required to run this game are missing from the installation directory.

  Original title: load error when you try to load Halo 2

  People at Microsoft, I have a problem trying to load Halo 2 on my dv7 Paviliaon with Vista and the 2.8 GB Intel Centrino 2 processor. When I try and load the game, I get and error stating: "the files are missing or damaged in the installation directory. A few important files required to run this game are missing from the installation directory. "It bothered me for several reasons. One: the disc that I use is an original disc out of the box so hsould have no problem. Two: the game has been loaded previously on the same computer without apparent problem at the time. It has been deleted (don't remember why) and when I tried to reinstall, the error came. Three: I did as recommended and updated all programs and drivers, nothing works. So my question is, how do I reinstall Halo 2 and what this problem will arise if I decide to buy and load Halo 3?

  Thank you for your time in advance.

  Hello

  As you are facing problems with Halo 2, I suggest you to refer the link for better support:

  http://forums.haloonwindowsvista.com/forums/

• Windows mail gives error when you try to send 0x800ccc0e

  Windows mail gives error when you try to send 0x800ccc0e

  Check if you can access your e-mail via webmail.  If it works fine and that you always have problems in WinMail, then delete your account e-mail, then compact and repair the database (www.oehelp.com/WMUtil/) and then add your account to e-mail back again.  Often, this solves these problems.

  Steve

• "Only one instance of wusa.exe is allowed to use" error when you try to install a Windows Standalone Update package

  I just came across this error when you try to run the stand-alone update of Windows for Microsoft Virtual PC on my Windows 7 Professional machine.  Check the event logs, I saw the following message:

  Windows Update could not be installed due to the error 2147944018 "another installation is already in progress. Complete it before you proceed with this installation. "(Command line:""C:\Windows\system32\wusa.exe" "C:\Users\dorseytm\Desktop\Windows6.1-KB958559-x86.msu" ")

  I searched, but could not find any current installation.  I rebooted several times, I tried to run CCleaner on the registry, stop and start the Windows Update service, but nothing has worked.

  The file I am trying to run is Windows6. 1-KB958559-x 86.msu.  Any help on this would be greatly appreciated.

  Thank you.

  tmdorsey76,
  A few questions.  This error only happens with KB958830 or with others?  What language is run on the PC?

  If you are comfortable with the registry editor, then look to see if this key exists:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\InProgress

  If this key is there then first copy it to your desktop then delete this key.

  * Change the REGISTRY settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.* *.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.