Manuel Conversion monetary vs Multi currency request

Similar Questions

• OPA has multi-currency support?

  OPA has multi-currency support?

  Separate attributes could be used to express, for example, the annual salary of the person in dollars of the United States against the annual salary of the person in AUS dollars.  Policies / rules could also be expressed to determine how to determine from each other at a given date.  Policies would also express that attribute/value to use in the context of the different management rules, policies or calculations.  However, it does not have a built-in ability to use a presumed defect, or table "exchange rates" which would allow to the automatically the comparison or calculation of the same attribute in different currencies.  (for example you cannot express a policy in U.S. dollars and then to provide the data in Euros without also defining how to determine the correct conversion from one currency to the other in this context)

• Multi currency billing

  Hi all

  I'm on a project and the customer have the need for multi-currency billing...

  Turns out that I cannot create an agreement in another currency to the project and also does not include budget recipes online to other currencies.

  When I try to register the agreement in another currency, I get the message:

  "In exisists in exchange rate for the conversion of currency to the functional currency of the financing project. Please change the attributes of the currency. »

  Already have Bill hourly rate established in BRL and USD and still impossible to create the budget of receipts with the two currencies and nor the agreement...

  Anyone know how to fix this?

  In the configuration of your project: make sure you have the settings right in the currency of your project configuration section, make sure that you selected the correct values.

  Do a search for 'Invoicing currency' in the fundamental Oracle project guide, this should give you enough information to accomplish what you need.

• Disable features in version 15.1 multi-currency.

  I am Setup 'Oracle Instantis EnterpriceTrack' and I use the version 15.1.

  The system is still in "Install Mode" and I need to delete the Multicurrency option.

  I can't find the option as part of the feature to the GLOBAL Initiative:

  Finance - multi-currency capability - allows multi-currency capabilities. (Default currencies must still be added.)

  This option is present in versions 9.0 and 8.7.

  Is there a new way to disable currencies?

  There isn't a way to disable Multicurrency in the settings of the features more.  Since you're still in install mode, why not simply remove all currencies other than what you want to use, and this will act the same as the single currency.

• How to set up a multi-lingual and multi-currency site

  I've been reding this article

  How to set up a multi-lingual and multi-currency site to installing a multilingual and Multicurrency site

  I want to know if I have 3 or more areas:

  • www.yourcompany.pt- Portugal
  • US.yourcompany.com - United States
  • UK.yourcompany.com - United Kingdom
  • www.yourcompany.com - China
  • www.yourcompany.fr-France

  do I have to create 5 versions of the site in five different languages?

  Also I have to create five different versions of a product for the corresponding five languages?

  Hello

  Please take a look at the following site,

  Tutorials

  Let me know if you have any question.

• Can we change demand for unique planning currency for multi-currency planning application?

  Hi all

  My requirement is to change an application of single currency PSPB in multi-currency application. I know that this approach is pretty weird but wanted to know if we can do this by changing the backend schema tables. Please suggest on the same as soon as POSSIBLE.

  Thanks in advance.

  Kind regards

  Sahi

  PL

  If you need to make a multi-currecny application and use the same convention of naming (i.e. TSTPLAN)

  1. I mean perform a LCM full backup.
  2. create the new application using the same data source for the original TSTPLAN connection.
  3. Create the database if planning push to essbase
  4. LCM import the dimensionality of your TSTPLAN (don't do anything but the dimensions).
  5. Once you have all dimensions in and it ends with SSP without any problem do the other artifacts planning (web forms, calc scripts, etc..)
  6. now perform a full refresh of db.

     If everything is done successfully, you should have the OLD application as the NEW application with multiple currencies. You may need to adjust web forms, reports, and other artifacts to call the extra dimensions. Unless u don't multi-currency via custom dimensionality.

• Application multi currencies

  Hi all.
  I created an application of multi with only two currencies USD and Euro currency. But when I try to enter data into forms of data through USD or Euro, I am not able to do.
  But when I select local, then it allows me to enter the data. I have never created a local member and is not their size, then what is the significance of this local currency.
  Also, I've created a few currencies conversion scripts and run them successfully, but when I see data across Euro or USD is the same data, as I walked into the local currency.
  
  Please guide as I am very confused.

  Good reading this post:- Re: features in RW in the planning of the data forms

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Conversion of forms at the request of the Apex

  Hello

  I have a problem with Oracle Application Express: when I try to convert an Oracle Apex Application Forms Application, I can't keep the same design!

  Would you please help me to solve my problem?

  If you google a little on this topic, you will find several articles and papers on the subject of forms of conversion of the Apex. The basic conclusion is: you don't have to bother using the converter. Simply create a new application from scratch. The differences between the shapes and the Apex are too big.

  Here is an overview:

  http://sagecomputing.com.au/papers_presentations/Forms_to_Apex_Conversion.PDF

• Button/multi status request

  Hi all

  I meet a challenge that I think has been discussed on these forums.

  It comes to pixelated, blurry text in buttons and multi-state objects.

  A solution to this question does not use objects that contain text and the buttons or multi-state objects. Instead, you insert shapes with no background/outline on top of graphic text and then grouping them.

  This ensures that the text is clear and sharp.

  However, if you want to have a roll over State, with another color of fill/outline/text as part of the State of reversal, then there are problems as the form acting as a button must have no background/outline or text in their breast.

  Through a work around for this problem?

  Thank you very much

  H

  You can assign to vector ASM or do this: http://boblevine.us/digital-publishing-suite-101-keep-text-sharp-in-raster-slideshows/

• Subform multi-currency

  Hi I would like to Use Multicurrency subform but I could not find the right way , J’ai used a combo for change the location of la subform but only changes la first value could someone help me please .
  
  Thank you .

  Hello

  There is an example here: http://assure.ly/e59VGu.

  The first page changes the locale of target objects individually.

  The second page adaptation function of Paul change the location of all objects in a container.

  Hope that helps,

  Niall

• print a list of multi page requests

  is that all knowledge in a way to print the list of all of the query when it spans 3 web pages? I found nothing on all of the print both list?

  Thank you

  Jim

  Set "3 web pages.

  Do you mean that you have a web interface that breaks a larger set of records and 'pages' it?

  If this is the case, then you just need to create another view of the web page which does not paginate the data and allow users to 'print' from this point of view.

  If you have not paginated data, what is the difficulty?  The nominal and easy way to produce a complete in a single loop of on a single web page that would by default.

  Post edited by: ilssac P.S.  In other words, providing a glimpse of what your release code and | or error actually looks that would make it much easier to answer.

• Currency conversions

  Hello
  
  I'm not that experienced in planning multi-currency and so I need help on the implementation of the currency conversion process for our planning multi-currency application. I have both below and your entries in moving more away.
  
  The application was originally set as an application multi currencies, but so far forecasts only was in USD. The default currency is set to USD in our application and is our desired currency.
  
  Now, we have a requirement where we need some of our users in their local currency. Users are three other countries 'A', 'B' and 'C' outside of the USA. Users will be provided in their local currency and the currency conversion process must be the program to install/run in the background to convert the USD currency for purposes of tax.
  
  Can you get it someone please let me know the important steps that I have to do to get there? Also what do I need to keep in mind while doing this process. If someone could share some documents on this subject which could help me to achieve this would be helpful too.
  
  FYI-I see the two dimensions of 'Currency' and 'HSP_Rates' in our application schema, and each of them has the following members.
  
  HSP_Rates
  HSP_InputValue
  HSP_InputCurrency
  HSP_Rate_USD
  HSP_Rate_A
  HSP_Rate_B
  HSP_rate_C
  
  Currency
  Local
  USD
  A
  B
  C
  
  Please help with your entries. Any help is appreciated.
  
  Thank you.

  Since you are using application of currency multi planning itself created the script and conversion script copy.

  Please follow the links (that's 11.1.2.2)

  http://docs.Oracle.com/CD/E17236_01/EPM.1112/hp_admin_11122/ch04s08.html
  http://docs.Oracle.com/CD/E17236_01/EPM.1112/hp_admin_11122/mg_curr.html
  http://docs.Oracle.com/CD/E17236_01/EPM.1112/hp_admin_11122/ed_exchg_rt_tbl.html

  Concerning

  Celvin

  http://www.orahyplabs.com

• Currency conversion

  Hello everyone.
  
  So, I'm on a new effort, learn how to handle the currency conversion. I decided to handle this manually and not through planning. Does anyone have an overview of the tasks at hand? Where to start, and that everything is driven? Examples would be greatly appreciated as well. Thanks in advance!
  
  -Best regards

  Please see the following notes regarding the multi-currency conversion lever. Number 2 is the stage more current that is overlooked.

  1. set up exchange rate tables and enter rates.
  2 assign tables exchange rate for the appropriate members of the scenario.
  3. assign the type of appropriate rate (average, thin and historical) to the members of the dimension account.
  4. Enter the base currency appropriate to the members in the dimension marked as the entity dimension.
  5 create the currency conversion calc scripts using a refresh.
  6 confirm that the rates are in Essbase.
  7 run the calculation of hspcrtb.csc/hspcrtt.csc script to push rates on accounts statistics for real accounts. You must run this when rates are entered or modified, when a new account is added or the type of exchange rate is changed for an existing account.
  8 run a calculation of currency conversion script to create the reporting currency data.

  Also remember that when Exchange rates are pushed to Essbase during the updating process, they are stored in the Essbase application in the intersection below. The key point is that the data is stored in the upper part of the House to some dimensions and if the data storage became an option off store as dynamic Calc and No Store, there is no room for the rate to store.

  Account: Level 0 members (HSP_Historical, HSP_Average, HSP_Ending)
  Period: Level 0 members (Jan, Feb,...)
  Scenario: Level 0 members (real, Budget,...)
  HSP_Rates: Level 0 members (HSP_Rate_GBP,...)
  Currency: The currency Dimension member name
  Version: Name of Member of Dimension Version
  Entity: Name of Dimension entity member of the
  Defined by the user Custom Dimension (s): Dimension member name xxxxx

  HTH-
  Jasmine.

• Payments in currency multi in R12

  Hi all
  
  Can someone tell me if the Multi currency payments are allowed in R12.
  
  To make it clear... our functional currency is LKR and invoice in CHF and want to make the payment in U.S. dollars... This feature is available...
  
  Early response is appreciated. We are on 11i...
  
  
  Thanks in advance.
  
  MPH

  (Or) Check the [http://download.oracle.com/docs/cd/B34956_01/current/acrobat/120apug.pdf].
  Chapter payments-> create payments in foreign currency-> currency payment Restrictions:

  By
  VAMSi

• In the page using monetary dimension

  Hello
  
  How can I use monetary dimension on the page to enter some data in different currencies on level of data form.
  In fact, in my case, it was about 114 different currencies and I want to enter data into each form data with a specific currency.
  
  Thank you.
  Ahmed

  Hello
  This may seem a little strange, but I guess the correct answer to your question is do not to use the Multicurrency option in your application. Application multi-currency functionality is planned for companies/organizations that has features that work using fixed for most currencies. It also means, it is not ideal if your entities use to most of the multiple currencies. In your case, it would be much easier to maintain the feature using a custom currency dimension multi-currency and currency conversion rules.

  See you soon,.
  Alp