OPA has multi-currency support?
OPA has multi-currency support?
Separate attributes could be used to express, for example, the annual salary of the person in dollars of the United States against the annual salary of the person in AUS dollars. Policies / rules could also be expressed to determine how to determine from each other at a given date. Policies would also express that attribute/value to use in the context of the different management rules, policies or calculations. However, it does not have a built-in ability to use a presumed defect, or table "exchange rates" which would allow to the automatically the comparison or calculation of the same attribute in different currencies. (for example you cannot express a policy in U.S. dollars and then to provide the data in Euros without also defining how to determine the correct conversion from one currency to the other in this context)
Tags: Oracle Applications
Similar Questions
-
Disable features in version 15.1 multi-currency.
I am Setup 'Oracle Instantis EnterpriceTrack' and I use the version 15.1.
The system is still in "Install Mode" and I need to delete the Multicurrency option.
I can't find the option as part of the feature to the GLOBAL Initiative:
Finance - multi-currency capability - allows multi-currency capabilities. (Default currencies must still be added.)
This option is present in versions 9.0 and 8.7.
Is there a new way to disable currencies?
There isn't a way to disable Multicurrency in the settings of the features more. Since you're still in install mode, why not simply remove all currencies other than what you want to use, and this will act the same as the single currency.
-
Hi all
I'm on a project and the customer have the need for multi-currency billing...
Turns out that I cannot create an agreement in another currency to the project and also does not include budget recipes online to other currencies.
When I try to register the agreement in another currency, I get the message:
"In exisists in exchange rate for the conversion of currency to the functional currency of the financing project. Please change the attributes of the currency. »
Already have Bill hourly rate established in BRL and USD and still impossible to create the budget of receipts with the two currencies and nor the agreement...
Anyone know how to fix this?
In the configuration of your project: make sure you have the settings right in the currency of your project configuration section, make sure that you selected the correct values.
Do a search for 'Invoicing currency' in the fundamental Oracle project guide, this should give you enough information to accomplish what you need.
-
How to set up a multi-lingual and multi-currency site
I've been reding this article
How to set up a multi-lingual and multi-currency site to installing a multilingual and Multicurrency site
I want to know if I have 3 or more areas:
- www.yourcompany.pt- Portugal
- US.yourcompany.com - United States
- UK.yourcompany.com - United Kingdom
- www.yourcompany.com - China
- www.yourcompany.fr-France
do I have to create 5 versions of the site in five different languages?
Also I have to create five different versions of a product for the corresponding five languages?
Hello
Please take a look at the following site,
Let me know if you have any question.
-
Can we change demand for unique planning currency for multi-currency planning application?
Hi all
My requirement is to change an application of single currency PSPB in multi-currency application. I know that this approach is pretty weird but wanted to know if we can do this by changing the backend schema tables. Please suggest on the same as soon as POSSIBLE.
Thanks in advance.
Kind regards
Sahi
PL
If you need to make a multi-currecny application and use the same convention of naming (i.e. TSTPLAN)
- I mean perform a LCM full backup.
- create the new application using the same data source for the original TSTPLAN connection.
- Create the database if planning push to essbase
- LCM import the dimensionality of your TSTPLAN (don't do anything but the dimensions).
- Once you have all dimensions in and it ends with SSP without any problem do the other artifacts planning (web forms, calc scripts, etc..)
- now perform a full refresh of db.
If everything is done successfully, you should have the OLD application as the NEW application with multiple currencies. You may need to adjust web forms, reports, and other artifacts to call the extra dimensions. Unless u don't multi-currency via custom dimensionality.
-
Manuel Conversion monetary vs Multi currency request
Hello
I was wondering what are the exact changes between the creation of an application as a currency multi early application, be able to enter data in different currencies and running the currency for conversion scripts to display data in the required reporting currency and between creating an application without select the multi currency option and do the necessary conversions at the level of currency dimension and create customized to business rules the necessary conversions.
What is the difference between these 2 options?
Thank you.
Hello
with the build-in currency conversion rates are stored in the upper part of the dimensions. I will store them on the artificial limb. Then I can make the only dimension member label and it will be not be combined in a Calc. DIM. This saves time.
Then, there is a standard size on the rate type. Usually, I use another dimension to this.
I can't be generic in my answer, because every application is different. There is no blue print that benefits everyone. There are some concepts, but this goes too far to explain in a forum. This is where conferences like KSCOPE for.
Kind regards
Philip Hulsebosch.
-
Pavilion 15-ab208ur: is HP has plans to support the customers of amateur level?
Hi all
I use a new computer laptop 15-ab208ur flag and a little frustrated that it has limited options in the BIOS and restricted parameters in the native software of HP.
I would like to get complete control of the material that I paid for, but unfortunately it is not true at the moment.
It would be great to see HP Support help certain tools of monitoring/tuning for the hardware components that allow me to control material (temperature, frequency, etc.).
For example, I raised a question about the frequencies of vRAM here:
http://h30434.www3.HP.com/T5/notebook-video-display-and-touch/GeForce-940m-default-VRAM-frequency/TD...
I have to use tools like MSI Afterburner, GPU - Z, etc. to monitor my laptop.
It will be nice to have the same characteristics in Support of HP for Assistance or HP CoolSence tools.HP has plans to add support for amateur-level clients to their software side of laptops?
Best regards
Alexey.
Hello
You can move to another level and pay more such as machines of class work station or some machines TRUE games or you can build yourself a laptop BUT for computers laptops normal manything a BIOS locked in. Sellers (not only HP) must lock it with a very simple reason: they don't want users new machines BREAK and return.
Portable senior level are for a Pro like you.
Kind regards.
-
Pay Apple has the decision supports service?
Pay Apple has a service of decision support? This means that I cannot map recommendation when I buy something. For example, I have save 3 cards. A, B, C and I bought a coffee in Starbucks and when I pay by pay Apple, pay Apple recommend card B to pay due to the advantage of the B card. Please answer me on this subject. Thank you
N °
GB
-
1360t has SATA 3 support?
I want to buy you 1360t but I will change the hard drive for an SSD and I need support SATA 3 to get the maximum speed on the SSD. The 1360t supports SATA 3?
Hello
Looking at the motherboard for this PC, it has 4 x Sata II and Sata III x - Sata III conections 2 connections are in red and black down to the right of the motherboard diagram.
Kind regards
DP - K
-
Original title: VMWARE Player, what went right?
All of a sudden, VMWare Player [Win XP it] recognized and installed my printer HP LJ P1100w. This, after being informed by them, by phone, that this freebie version does not support any usbs in addition to human and internal interface. So, I decided to try to install my Deskjet 5400. I got a download HP upgrade package, uninstalled the existing software and Lo! VM has ask me to cut the host device and install it. Test page printed.
What I want to know, since I can't get the response from VMWare, is how is it? There have not been updated for ages.
Anyway, this avoids everything that copy/paste, drag and drop and no quality control before submitting the. PRN to Frogmore Rawprint.
Hello
VMware technical support technicians will be better placed to provide you with information:
Hope the helps of information.
-
I've been a fan of Dell and Dell bought since 1988 when michael dell was in Austin. The service was great. Then, like most companies that become very big, they abandon service customer for more profits. It's understandable that dell must show profits like any other company. I bought a lot of Dell computers, I have recommended the stock in Dell property There are too many people. That being said I received calls from Indian masquerading as Dell computers with my service number. they want to be able to control my computer from a remote location. I know it's a scam, so I tried to call Dell asking an American couldn't talk to Indians who are the main cause of the alarm. Now, either their India call centers have obtained all these numbers Express tag or Dell has been hacked. I'm trying to talk to someone and Dells the Security Department for the last four hours and a half, I have tapes of phone numbers of our conversations but are all that I can talk about the Indians, the root cause of the fraud. Now I get calls from the Indians who claim to be agents of the IRS who are really a joke as I play with these guys just out of fun as you would think that Dell would like to know more information on this case, a multi-billion dollar company should have better security or at least be willing to talk to a loyal customer
Hello! If you feel that your personal information has been compromised, you will find information on what to do here. Fill out the form that will give the information to Dell's internal security team.
-
JavaFX 8 (Multi-) touch support in Linux?
Hello!
Multitouch input is expected to support Java 8 SE Linux? I use a touchscreen capacitive with a DMC controller, connected to a PC via USB Ubuntu 13.10, and none of the example code I've tried seem to recognize all key events. In Windows 7, touch events are recognized, I can drag, zoom, etc.
So I wonder if the multipoint touch input is simply not supported on Linux with JavaFX 8, or I have another problem.
Best regards
Stefan
The best way to find out is to check the javafx jira. From here you can easily find the answer :}
The answer is not according to the following jira
GTK: Support multi touch for Linux
https://JavaFX-JIRA.Kenai.com/browse/RT-25079 as can see the status is still open.
-
Multi language support for reports and guests of labels
Is there a way to configure reports prompt the labels with the session\presentation variable
in order to support multi language interface?Hi Nir,
The reference is established to the RPD. Open the RPD-> presentation-> double layer click on the category column and type in the name of session variable, as shown here.
http://i51.Tinypic.com/qp3pkh.PNG
Rgds,
DpKa -
Hi all.
I created an application of multi with only two currencies USD and Euro currency. But when I try to enter data into forms of data through USD or Euro, I am not able to do.
But when I select local, then it allows me to enter the data. I have never created a local member and is not their size, then what is the significance of this local currency.
Also, I've created a few currencies conversion scripts and run them successfully, but when I see data across Euro or USD is the same data, as I walked into the local currency.
Please guide as I am very confused.Good reading this post:- Re: features in RW in the planning of the data forms
See you soon
John
http://John-Goodwin.blogspot.com/ -
HP 15-r022tx Notebook PC has no driver support for windows?
I think to buy a computer laptop 15-r022tx flipkart HP and it comes with free back installed on it. But I want to install windows 7 on it and have the drive to it. But I'll take not all pilots, and so I looked for the drivers and downloads on HP support website, but on it, the research did not find my cell phone. But the laptop appeared when searched the main site... Only the support site had nothing for her. What should I do now? I want to buy this laptop but how they acquire drivers for windows 64-bit u? Help, please.
Visit the following Web page for the drivers:
http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = in & DLC = in & sw_lang = & Product = 7280191 #N1648
p.s.: ignore the above post.
Thank you
visruth
Maybe you are looking for
-
Hello I just received my upgrade to Vista, after a wait of several weeks, just to know that on the DVD of self-training Toshiba that there are no drivers or updated BIOS for a Qosmio G30 - 175 (PQG30), there are the readers and the bios on the DVD fo
-
In Windows 7, try to re - activate windows search, but it does not work
I disabled Windows Search by going to the control panel => turn Windows on or off features => Windows Search and by unchecking the checkbox. I'm trying now reactivate it by putting a check in the box. It does not work. When I click OK, if I re - open
-
Name of the company signature PlayBook with a comma
I am signing an app webworks for the playbook, and when I ran this: . / blackberry-keytool - genkeypair - keystore sigtool.p12 - storepass mypassword - dname "cn = Creative App Design, LLC" - author alias I got this error: keytool error: java.io.IOEx
-
Hello I have Windows 7 and I'm trying to 'sting' 3 whole .wmv files in a movie. (You know, a very basic edition!) One of the files (once registered online or webinar) .wmv appears blurry on Live Movie Maker, but totally fine, clear plays in the drive
-
Not found Windows Photo Gallery after installing iTunes
After installation I tunes somehow I've lost my Windows Photo Gallery, how can I get it back?