Many problems with my D530 SFF, freezing and black monitor (windows xp operating system)

Similar Questions

• Problem with flash based Web pages and re - install windows

  Hello!
  I bought the Toshiba NB100 and use the netbook for a few weeks. At first, it worked all fine and exceeded my expectation.
  However, since one some time he experiences trouble with performance based on flash Web pages such as youtube and etc, which makes it not not possible to stream any video smoothly. Basically, it's a fast-paced photo slideshow :(
  The problem here is certainly not the performance mode, which is set at the maximum.
  I tried to get through this problem with re - install the operating system, which is windows XP, but after transfer of the content produced the DVD on a flash drive recovery, the system does not have a configuration menu. It gives me an error report instead.
  * I put the following qustions you: *.
  * 1. What can be the reason for slow running applications? *
  * 2. I'm doing something wrong when you reinstall windows? * Ts here a simple manual for the resettlement of the op?
  Comments, suggestions and advice will be much appreciated and I thank you in advance.

  So you have installed a generic version of Windows XP?

  You may have forgotten to install the drivers graphics and other critical drivers such as the Intel Chipset driver.

  You see problems in Device Manager?

• Synchronize my Pocket PC Dell AXIM 5 with my desktop Dell computer by using the Windows Vista operating system

  After the widows Vista operating system upgrade my Dell AXIM 5 PC Pocket can be not sync with my office.  Old software active sync is not compatible with Windows Vista.  At my pocket PC eventually become outdated.

  Hello ariccia473,

  Click the link for Mobile synchronization and see if your Pocket Pc works with the Mobile Sync 6.1.
  http://www.Microsoft.com/windowsmobile/en-us/downloads/Microsoft/Device-Center-download.mspx

  If this isn't the case, then you will need to check with Dell and see if they can be of support.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Problem with hard drive 3 TB and the need to delete the system partition reserved

  I am running Windows 7, 64-bit version.  have another hard disk of 500 GB and I bought a 3 TB hard drive and installed windows 7 on it (3 TB) fine.  But to finish install and found 3 TB hard drive showed only 2 TB of usable disk space.  does a job at home and found that before 2011, the bios of the motherboard can only support HD up to 2 TB, and in order to use all 3 to, I need to convert to GPT disk.  To do this, I need to remove the volume, but since I installed windows 7 more early, he created a score 'system reserved', I can't delete or edit, or format.  All boards to complete this (converted to GPT disk) so I can use all 3 TB of HD?   Now, I re installed windows 7 on my other drive.

  Any advice on how to convert to GPT disk without deleting the system reserved partition?

  Thank you all... Finally figure it out.  Just in case where any who need it going forward... and

  That's what I did

  Step 1.  start by using the windows installation disc 7, press SHIFT + F10 when the language pop up page, use the diskpart... command to remove the system reserved partition. and turn off the computer.

  Step 2.  Open the computer case and unplug the 3 TB hd of the motherboard by unplug the SATA her cable.

  Step 3.  Re-install windows 7, turn off the computer when done

  Step 4.  re - connect the 3 TB - DD and closed the case and power on the computer

  Step 5.  Disk management can use GPT disk.

  A lot of work, but finally did.

• I had many problems with the first cc 2014 so I reinstalled it and now it says that I can not open my project because it was recorded on a newer version. Is there something I can do?

  I had many problems with the first cc 2014 so I reinstalled it and now it says that I can not open my project because it was recorded on a newer version. Is there something I can do?

  Hi Gemma,

  It seems that after reinstalling, Premiere Pro no has not been updated to the latest version. Check your application creative cloud for updates. If she says Premiere Pro is up to date, try to update Premiere Pro through help > updates... option in Premiere Pro.

  Thank you

  Regalo

• D530 sff - freezes jacquard blocked screen - ideas?

  Hello

  My d530 sff freezes sometimes strange blocked screen - like psychedelic colored chessboard square on a blue background with a pattern. The squares shimmer a bit (which implies some treatment?), but it's totally unrersponsive.  The fault appears randomly and does not seem related to how long the machine has been run, nor his current mission (AFAIK). I can't cause the fault.

  It works under xp pro. I reinstalled xp on a different HARD drive and get the same, making me think it is not software/driver.  I've updated the BIOS, run memtest 86 + and premium 95 for hours and tests of material Inquisator and Ultimate Boot CD. They are all very well, making me think of the basic material is OK.  I considered the embedded video, but I can play movies on a network that is pretty intense...  With the lid, nothing in the area becomes too hot to the touch, although some chips and the plugs should be near 60 degrees celcius.  Radiator CPU fine to the touch.

  It would be easy to give up and say it's a weird mother board failure, but before I do any ideas?  The software matches the machine has more value than the box so I would rather not throw.

  Thanks for your ideas, Mike

  I extracted the zip file to install the Intel 14.16 package and installed manually from the Device Manager. Package Intel 14.17 absolutely did not work on every box of d530. This is the root of the problem which I faced instability.

  You can identify the controller by checking the properties of devices in the Devices.Look system for x or exclamation next to the drivers points, or if you see instances of "unknown device".

  SisoftSandra Lite will also identify the devices installed in the hardware section.

  As far as bad capacitors going that visually close should be enough. Search for leakages, bulging, distortion, a brown substance on or near the caps.

  So... in your systray, you see an icon of Intel graphics? That's what you should see if the graphic driver went well.

• Problems with video previews: Picture freezes during purification (CS6)

  I just installed CS6 on my computer after working with CS5.5 and I met a strange problem with my EOS5D Mk 2 and also Ixus 100IS images in Bridge CS6 (in fact, this happens with all videos).

  In CS5.5, I could get a glimpse of my mov files and rub through them without many problems (apart from occasional, but good crash... )

  In CS6 now the preview of the video starts and everything seems fine, until I have rub to a point later in the video. At this point, the video freezes but the sound continues. The only way to make the video running again is to click pause and then click play again. You can imagine that rub through videos is not fun...

  Someone at - it already had a problem like this with CS6?

  Since CS5.5 is always installed, I checked and found that in CS5.5 bridge everything still works fine: no video freezes it - only in CS6

  I've already updated the latest graphics card driver and all updates cs6. Does anyone have an idea what I could do?

  some stats on my computer:

  Win7 64 bit

  NVIDIA geforce GTX 590, pilot 301.42

  no other video software installed

  Aside from that, I also realized that the video quality in the preview area is not particularly brilliant (in CS5.5 or CS6). Because the video is proportional to the size of the preview window, I sometimes get artifacts/moirees scale. Is there a way to smooth video playback, as you would in a regular video player?

  Yes, this is a known bug.  I found it in beta, Adobe has confirmed, and they should have a fix on the next dot (hopefully) release.

• I keep trying to find ways to update all my drivers at a time, as many problems with this computer

  ORIGINAL TITLE: update drivers, fixing problems, etc. NOTHING WORKS.

  I keep trying to find ways to update all my drivers at a time. There are so many problems with this computer, I'm so frustrated and things on it, I have to PAY TO ASK a QUESTION FOR CUSTOMER SUPPORT. Seriously, I'll blow my head because this trash is so UN-easy to use.

  Is - it really too much to ask for a single ' difficulty my * ing of the computer problems "button?

  Here is a list of what specifically is messed up. I don't want to spe backspace to show what I mean.

  I type really fast and never skip a key. Howeer, the computer ignores the keys as in the words "SPE" and "howeer" I typed jut. Now it's "jut" instead of "right".

  So, there is a problem that should not be happenng.

  Secondly, I play some games including the [scroll] scrolling bar on the frame-inmousepad does not work, period. 2011-2012 release, so it's something I can't fix on mymouse of course. I tried fixing it, and he says he successfully fixed wa. LOL no, it wasn't, it's just * ed even more.

  I refuse to poor a ton money int. f fixing these problems because I simply don't trust they're going to fix anything, and these problems should not occur initially.

  k so bye, go go rifle my brain of becaue it's so rustrating.

  Hello
   

  1. does come with any specific application?

  2. who is the manufacturer of the computer?

  3 did you changes to the computer?

  Keyboard problem:
  Method 1: Try with the keyboard on the screen and see if it helps.
  
  Type without using the keyboard (on-screen keyboard)
  http://Windows.Microsoft.com/en-us/Windows7/type-without-using-the-keyboard-on-screen-keyboard
  Method 2:
  Check if the problem persists in safe mode with network, to start the computer in safe mode, follow the below mentioned article:
  
  Link, please refer to: start your computer in safe mode:
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

• Many problems with Windows, Windows cannot communicate with the device or resource (primary DNS server)

  Many problems with Windows, Windows cannot communicate with the device or resource (primary DNS server), Internet Explorer browser does not.

  Hi Rachel,

  I understand that when you try to connect to the Internet, you get error "Windows cannot communicate with the device or resource (primary DNS server)", what other issues you are faced with Windows?

  • Using a cable or a wireless Internet connection?

  DNS (Domain Name System) translates the URL in IP (Internet Protocol) addresses (and vice versa). For example, if you type http://www.microsoft.com into the address bar in your web browser, your computer sends a request to a DNS server. The DNS server translates the URL to an IP address so that your computer can find the Microsoft web server.

  I suggest you to follow the methods in this article and check if it helps.
  http://support.Microsoft.com/kb/2779064/en-us

  Let us know if it helps.  If the problem persists, please answer, we will be happy to help you.

• Too many problems with the latest version of Lightroom

  Hi all

  I have too many problems with the latest version of Lightroom (CC 2015.2.1 1046594)

  In fact, the latest version of 3 or 4 were bad: instead of doing better, I always had more problems.

  So I would like to go back to a previous version of lightroom

  Adobe customar care, in Italy, is unnecessary:

  they can just to:

  -looking for answer on this forum

  -saying "you solve your problems just with the de-insall and re-install it.

  stop, no more...

  in this way they create me a lot fo iusses...

  I use the English version of the PS and LR, but they made me reinstall the Italian version of CC because it has been blocked

  the result was that CC does not recognize software, due to a different language version

  so, I contacted again Adobe Customer Care... they said "no problem, uninstall LR, delete these files and install this...

  I did and I let go 2 years to develop the parameters on the correction of the colors for my clients because they told me to remove a folder, I need!

  so, I ask you now if there is a way to return to a previous version of lightroom, any previous version...

  I never found better performance in more recent versions...

  I've always found, performance slower, more problems...

  personal idea: I do not understand why adobe are boicotting itself, but I think he do!

  Thanks to you all

  Hi ramontillo,

  6.3/CC 2015.3 Lightroom is now available - try to update to this version which includes the previous import feature, bug fixes and new support for photo/target device profile: Lightroom CC 2015.3 / 6.3 now available

  Concerning

  Pete

• Are there problems with OS 10.11.4 and opening?

  Are there problems with OS 10.11.4 and opening?

  Upside down images in the mode list. There is no hope of any problem opening fixing. There will be no further development.

• Problems with different e-mail addresses and the different Apple ID

  Hi, I have some problems with the different Apple ID and e-mail addresses connected to them, and I hope someone can help me in what to do.

  First a primer on my Apple ID

  ***@me.com - it's my account General iCloud (backup, iMessage, Facetime etc.).

  ***@losmail.no - my iTunes/App account (purchase and download music, app, etc..)

  ***@me.com: I have no problem connecting to this account (appleid.apple.com, iCloud.com etc etc..)

  ***@losmail.no: I have no problem connecting to this account in iTunes/App Store. However, I can not connect on appleid.apple.com with this account because he asked me to check the email address. However, this e-mail address use a messaging service that doesn't work anymore, so I can't check it out. Because it is a private messaging service, I want to change the Apple ID on my account @gmail.com.

  I believe, however, that the account @gmail.com has been connected to the account @losmail.no because I received my shopping etc. of my account @losmail.no sent to ***@gmail.com. These recipes also "Apple ID: * @gmail.com. When I connect to the account, however, use ***@losmail.no. However, an I said, I want to log on by using ***@gmail.com.

  What is strange is that in iTunes / App Store, I can connect with ***@gmail.com. However, this is not the same account as ***@losmail.noand previous purchases / comments etc. are not available. It's strange because said revenues (Ref. above).

  An other ting that indicates that the Apple ID where I use ***@losmail.no once was connected to ***@gmail.com, is what happens when I try to log in to ***@gmail.com to appleid.apple.com. Then, I get a message saying that the e-mail address must be verified. I can write the code sent to the ***@gmaiI.com, but it is said then that this e-mail address is already is used by another Apple ID, so it cannot be verified.

  So I guess my question is, basically, how I can change the ID of the ***@losmail.no to ***@gmail.com Apple when I can't access the account losmail, but the appleid.apple.com tells me that I need to check this email address.

  Best regards

  Philippe

  Hi phillla,

  Thanks for all the details with your accounts.

  Can be difficult to have more than one Apple with several e-mails all mixed together.  If an email is used with another Apple ID, for example, that e-mail can be used to create a new Apple ID or rename an old.

  The analysis of what you seem to have however...

  Your purchases are with your *@losmail.no Apple ID, but the emails for this go to your *@gmail.com email address.

  *@gmail.com is the primary e-mail address for your Apple ID *@losmail.no.

  You can connect to iTunes or manage your page ID with *@gmail.com Apple says it's an Apple ID on its own.  As an email address can only be verified for an Apple ID, which means that he must check with your *@losmail.no Apple ID and cannot be verified with *@gmail.com.

  You say you can not connect on appleid.apple.com with *@losmail.no you will need to check the email address.  You have a relief attached to this ID e-mail? This is the email that would be used to recover.   You receive your check or reset email - Apple Support

  Bottom line, you want to change your primary Apple ID but outdated to *@losmail.no to *@gmail.com, you must first rename *@gmail.com to something else and delete this email of all codes from Apple as well.  Then follow the link above to get access to *@losmail.no and control so that you can rename it.

  Best regards.

• Error - there is a problem with the external Setup program and it must be closed when you try to install windows updates

  Original title: How can I fix external MSI?

  When I try to download the updates, the error message says there is a problem with the external Setup program and it must be closed.  Updates will not be installed.  Anyone know how to solve this problem...?

  Hi John,.

  ·         You are able to install other applications on the computer?

  It seems to be a problem with the corruption of the .net framework. I suggest trying to repair the .net framework on the computer and see if you can install the updates.

  http://support.Microsoft.com/kb/923100

  Hope the helps of information.

• 7 error "Paris 7.2.241.1enRegInstaller.exe of work and has been closed." A problem with the application to stop functioning properly. Windows will notify you if a solution is available.

  Original title - 7.2.241.1enRegInstaller.exe

  Hello.

  Today, JUST after I "Set Windows to update," twice, I got the disconcerting message:

  "Paris 7.2.241.1enRegInstaller.exe of working and was closed".

  A problem with the application to stop functioning properly.  Windows will notify you if a solution is available. »

  Any wisdom or experience with this?  I'm on a 64-bit HP Pavilion older (dv7-1245dx) with this OS JUST-update Windows (Vista Home Premium).

  Thank you.

  GIES W

  The solution has been found just uninstall bing bar, restart the computer, and if you want just bing toolbar to reinstall. This easy solution my system fixed.  Bing has again reminded all my points that I have amassed

• Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

  Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

  Would you advice, thank you.

  Hi Hugo,.

  1. what anti-virus software you have installed in the computer?

  2. What is the full error message/code?

  3. the issue occurred after you install Minecraft?

  4. are you able to play Minecraft without any problem?

  5. what happens with Antivirus and Java?

  Windows Update can occur if one or more of the following conditions are met:

  1. the Windows Update database is damaged.

  2. antivirus software is configured to scan the %Windir%\SoftwareDistribution folder.

  3. the service (BITS) Background Intelligent Transfer Service does not receive a content link header.

  4. a required system file is incorrectly registered.

  5. Windows Installer has encountered an error.

  6. the manifesto of component maintenance (EC) is damaged.

  7. the Windows Update service has stopped during the installation.

  8. a version of the file conflict exists with Windows Update agent files.

  Please follow the steps described in the methods to solve the problem:

  Method 1: We will try the steps from the following link and check the result:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058?WA=wsignin1.0

  Method 2:

  To correct the errors that occur when you use Windows Update, install, and run the system update readiness tool. The tool analyzes inconsistencies on your computer and fixes as its current installation.

  You can view the following link to download the system update readiness tool and check:

  System tool update that corrects problems of Windows Update is available for Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  Details of the event log to find what caused the Antivirus and Java to fail:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Hope that the information provided is useful.

  For any help related to this problem or any question of Windows, you can still display in the Microsoft Community Forum!