map of access to the network denied on vista drive home premium

Similar Questions

• How can I work around the compatibility test during the upgrade of Windows Vista Edition Home Premium to Windows 7 Home Premium?

  During the upgrade of Windows Vista Edition Family Premium of Windows 7 Home Premium, he stopped at the compatibility check and asked to uninstall McAfee Personal Firewall Plus. I uninstalled McAfee Total Protection, but the problem remains. I contacted the technical support of McAfee and it installed and running a deep cleaning products McAfee removal. But the problem remains. What should I do to work around the compatibility check, so that I can complete the upgrade to Windows 7 Home Premium.

  Go to C:\Program Files

  Remove the McAfee program from there folders

  Restart the installation again.

  Also:

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

• Unable to connect to the internet using Windows Vista Edition Home Premium

  Just installed Windows Vista Home Premium and cannot connect to the internet.  The network card is a Broadcom 802.11n and a code appears who says: device cannot start (Code 10).  Does anyone know how I could fix this problem?

  I think that you don't have the right driver.

  Go to the website of FAB and look for downloads or support and type in your model number and find the driver for the network card.

  Thank you.

  Tech of

  http://www.computerstar.ca/

• where the fax on windows vista edition Home premium? I went to start, all programs, accessories, do not see a selection for communications.

  This is where the video clip on youtube says I should be able to find it.

  http://www.Microsoft.com/Windows/Windows-Vista/features/fax-scan.aspx

  Explore the features: Windows Fax and Scan

  The versions of Vista Home didn't have a fax MACHINE.

  You need 3rd Party Software:

  http://www.SnapFiles.com/reviews/Snappy_Fax_2000/snappyfax.html

  Snappy Fax allows you to send and receive faxes from your computer. You can use your scanner to scan documents and then sent a fax to any fax machine, or use the print command other applications to use the virtual fax printer, allowing you to send faxes directly from most Windows applications. In addition, the program also supports faxes sending via the internet, filtering of unwanted faxes and transfer incoming faxes to other fax or e-mail addresses. Additional features include import address book, faxes by email (with zip for images support), OCR, spell checking and much more.

  See you soon.

  Mick Murphy - Microsoft partner

• Restrict access to the network on 871 router via mac address

  Hello

  I have a Cisco 871 router and I am trying to allow only specific MAC addresses access to the network. Is there a way to specify that only specific MAC addresses are allowed to access? Any other MAC access will be denied?

  I can either have static IP or DHCP for local machines.

  Can I use this "secure DHCP IP address assignment" details found here... http://www.cisco.com/en/US/docs/ios/12_2t/12_2t15/feature/guide/ftdsiaa.html ?

  I use these...

  static Mac address table

  OR

  Security table of Mac addresses

  ... to achieve this?

  Thank you.

  You can use "mac-address-table static" If you know all the mac addresses that will be connected.

  If the router is by distributing ip addresses so you can indeed do secure IP DHCP address assignment.

  Note that you can make a 'mac access-list' switch and aplly in any vlan you want.

  Alternatively, you can do "dhcp snooping" allowing guests who got a dhcp ip addresses and are not identity theft.

  I hope it helps.

  PK

• From Firefox blocks all access to the network

  When I start Firefox (41.0.1), all access to the network is completely blocked. Before you start the FF, I can access the Internet (with Chrome or IE), other computers, but as soon as I launch Firefox, all access to the network (including the connection to other computers) is blocked. In addition, my computer will turn off more.

  As far as I KNOW, I have not installed lately extensions or add-ins.

  Thank you for your resolution. Today, when I mentioned to work, I was told to update Firefox. This seems to do the trick (so far, fingers crossed!).

  (https://support.mozilla.org/en-US/kb/refresh-firefox-reset-add-ons-and-settings) so very probably an extension is causing harm.

  When this isn't ' t the resolution, I will surely return to your resolutions.

• Adapter LAN question, "no access to the network.

  Original title: LAN adapter issue

  Hi all, when connecting my laptop to a switch of the LED on the switch is green which means connected. The IP address on the laptop is entered manually, but when will the cmd and issue ipconfig it shows "media disconnected" and the network adapter in the Control Panel indicates "no access to the network. It also indicates that "this device is working propoerly! Please advice

  Hello

  What is the number and the model of the computer?

  Remember to make changes to the computer before the show?

  Thanks for posting in Microsoft Communities.  The problem description, I understand that you can not connect to the Internet.  Correct me I misunderstood the question

  Follow these steps:

  Method 1: Follow these steps:
  How to troubleshoot possible causes of Internet connection problems in Windows XP: http://support.microsoft.com/kb/314095

   

  Method 2: Follow these steps:

  
  Step 1: renew DHCP Dynamic Host Configuration Protocol)
  a. click Start, click run, type cmd and click OK.
  b. in the command prompt, type ipconfig / renew
  c. Close command prompt.
  d. check the result.

   

  Step 2: Try to obtain an IP address automatically
  a. open Internet Explorer, go to Tools, click on Internet Options, connections, LAN settings.

  b. uncheck all boxes except automatically detect connection settings
  c. click OK to apply the changes.
  d. check if the problem persists.

   

  Method 3: If the methods above do not help, check if the wireless card is very well and try to update the drivers on the manufacturer's Web site.

  a. click Start and right-click my computer.
  b. Select Properties and then click the hardware tab.
  c. click on Device Manager and expand network adapters in the list.
  d. right click on the adapter, then click Properties.
  e. click the driver tab and click Update the driver.

  Please follow the steps and let us know if this helped.  If the problem persists, answer and we will be happy to help you.

• "No access to the network" problem in Windows 7 and error message "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."

  Hello, I have a desktop PC and a laptop (DELL Inspiron N-4050).
  I have problem with my internet connection cable which is working fine on my PC, but does not not on my laptop giving an error "no access to the network.

  When I troubleshoot it says "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."
  I said to many technicians of microsoft online response, but they could not solve my problem and said this is my DNS problem and advised me to contact my Internet service provider. Guess it's because of my internet so why it works on my PC not on laptop?

  Yesterday, my ethernet cable pulled out my cell phone and I couldn't connect to the internet more. But on my desktop PC, it works perfectly fine. (I do not use wifi, if this information is also required) I have studied several threads with similar situations, and I have tried different methods to solve the problem to no avail. I did a system restore, but I'm having no luck. Also, I did not of the latest changes with my anti virus software and my LAN card drivers look to date.

  When I remove my cable from the laptop and again connect my cable then it works but only after the PC sat for awhile.
  1.I did flush DNS by typing "ipconfig/flushdns" in the command prompt.
  2. my IP address, DNS, subnet mask etc are set to automatic.
  3.I also added physical address taken from command line giving "ipconfig/all". for the properties of the network driver settings.
  4.I ' installed the drivers to date of 2014 on my laptop.
  5.I did a lot of searching the web, but they do not solve my problem.

  Please help me to solve it.
  I appreciate your help.
  Thank you.

  Hello Hall,

  Please keep us updated on the status of the issue.

  I suggest you to follow the steps in this Microsoft article troubleshooting and check if it helps:

  Error message "your computer seems to be configured correctly, but the device or resource (DNS server) is not responding" in Windows 7

  http://support.Microsoft.com/kb/2779064/en-us

  Hope the helps of information.

  Please reply with the results, in order to help you solve the problem.

  Thank you

• LATITUDE DE820 wiped out loaded XP drivers DELL & SW, no access to the network

  Everyone out there - I need HELP... I bought a second hand LATITUDE DE820 with Windows 7 above and it worked fine (also WIFI). I need to load XP Prof on it (Yes...) and therefore all DELL SW disappeared (had no CD DELL) that I loaded package XP 3 Service that I plugged in Ethernet, but I also have a WLAN - but NO communication to all NETWORKS. Ping an IP address any LAN brings 'Host unreachable' IPConfig/all shows: IP of Windows host Setup...: laptop Prim. DNS: Enter Mode: Broadcast IP routing enabled: No. WINS Proxy enabled: Ethernet adapter without Bluetooth network connection: media state: media disconnected Description: peripheral physical addr Bluetooth (Personal Area Network): Mac addr. Control Panel-> network connections displays LAN at the Connecticut 1394 network adapter (properties: peripheral works properly, driver: MS 07/01/2001!) Connection status: connected but 0 packet protocols: f. Client Microsoft NW File & Printer sharing TCP - IP - trying to hit the repair-> msg "TCP/IP not enabled for this connection") Conclusion: I think that my XP drivers are too old, or not DELL problem: I have no access to the network - minimum need drivers update for access to Internet, and then upgrade to download that/those pilot on a Non-Dell PC then CD, then install on the laptop don't know DELL HW, used Service tag to find 11 drivers, drivers resp. 75 for that I think it's a driver of 'network' - but don't know what or any other suggestion? Thks for any help Peter

  Well well maybe it was because I realized that I needed to insert HTML
  to get my text with line breaks.
  But in any case the problem is solved by support group European German DELL who responded very quickly by there DELL Forum and help me great to go again. Thank you DELL-Dave S.
  Problem solved by:
  followind drivers downloaded from the CD, and then installed on D820
  WLAN: HTTP://WWW.DELL.COM/SUPPORT/DRIVERS/DE/DE/DEBSDT1/DRIVERDETAILS/PRODUCT/LATITUDE-D820?DRIVERID=R257701&OSCODE=WW1&FILEID=2731111614&LANGUAGECODE=DE&CATEGORYID=NI.
  LAN: HTTP://WWW.DELL.COM/SUPPORT/DRIVERS/DE/DE/DEBSDT1/DRIVERDETAILS/PRODUCT/LATITUDE-D820?DRIVERID=04VK6&OSCODE=WW1&FILEID=2731090506&LANGUAGECODE=DE&CATEGORYID=NI.
  Now using Ethernet and wireless network worked with access to the network, all the others downloaded drivers from the net.
  Viva

• Update Windows 7 pro (10 users) network January 1, 2013. Now, for more than 4 users connect an access across the network apps stop apparently. Any thoughts?

  Update Windows 7 pro (10 users) network January 1, 2013.

  Now, for more than 4 users connect an access across the network apps stop apparently.

  Any thoughts?

  Hello

  Your question is beyond the scope of these forums. Please ask your question in the following forum.

  Windows 7 networking:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Concerning

• vSwitch ESXi 5.1 workaround to virtual machines (direct access to the network)

  Hello world!

  I have a server running properly the 5.1 ESXi hypervisor and got inside the physical grid active router with DHCP. How can I configure the vSwitch on ESXi 5.1 work not managed on the network, without VLAN and have direct access to the network?

  Just to clarify, I would like to first of all virtual machines VMware Workstation works - if it is possible to run several virtual machines and define all NICS (Network Interface Card) as connected by a bridge, that is to say. Each VM gets the specific configurations of IP to the external router.

  Since now, thank you very much for the help!

  Best regards

  Eduardo

  With ESXi the vSwitches work comparable to Bridged networking, so there is really nothing special to do.

  André

• computer blocked the installation of updates for Vista Edition home premium

  I restart my computer (11 December 2009), and before it did, he said it was installing updates. He has been blocked for at least 12 hours of update 2 of 9. Is this normal? Is it possible to stop him with damage them the computer? I use Windows Vista Edition home premium and my computer is a Toshiba M305-S4019. I have just purchsed my computer in April 2009.

  Thanks in advance for your help.

  Hello

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Use the downloads at the end of this article - note for Vista x 86 versions 32 bit and Vista
  x 64 64-bit.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• Can I use the serial number of Windows 7 Home Premium to reinstall my system?

  Can I use the serial number of Windows 7 Home Premium to reinstall my system?

  If you mean the license key on the sticker cost of Windows on your computer, then Yes, you should be able to use it to activate the same hotfix version of via a retail disc. You * may * need to use for phone activation method accomplish, however.

  Kind regards.

• Silverlight will not install on my computer. I get an error code 659. Silverlight has worked on computer at the same time. Vista in Home Office business management.

  Silverlight will not install on my computer.  I get an error code 659.  Silverlight has worked on computer at the same time.  Vista in Home Office business management.  Can someone help me with this issue?  I installed Vista service pack 2.

  johncoxcpa,
  Well looking at the log you've posted, I came across this article:
  MSI (s) (2 c: D4) [22:29:29:073]: sequence number number for this installation system restore.
  This installation is forbidden by system policy. Contact your system administrator.
  c:\c17e5b6672c37d9f685b\Silverlight.msi

  So it seems that if your system has a software restriction policy installs.  You need to contact your IT Department. to learn about the changes to the policy will be to install Silverlight.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I was curious on how many computers can I install the full version of Windows 7 Home Premium on? -What is a machine?

  I was curious on how many computers can I install the full version of Windows 7 Home Premium on? -What is a machine?

  Hello Barett1234, Windows has always been dismissed for use on a single machine. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)