Flight Simulator panels and add on models fails to load on the main screen

Similar Questions

• Random reboots and crashes with WUDFRd failed to load of the device

  I get random reboots and falls down and receive check the event viewer I see this -.

  event 219, kernel-PnP

  The driver failed to load unit WpdBusEnumRoot\UMB\2 \Driver\WUDFRd & 37c186b & 0 & STORAGE #VOLUME # _____? _USBSTOR #DISK & VEN_USB2. 0 & PROD_CARDREADER_CF & REV_0100 #606569746801 & 0 #.

  well if anyone knows what it is?

  Your problem is unlikely to be associated with the event ID: 219, which warns a driver did not load. In fact the driver load a few moments later and the portable device then works.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

  Please download and share with everyone copies of your System log and journal of the Application (two files) of your event to your OneDrive Viewer and post a link here.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

  General remarks on event viewer
  http://www.gerryscomputertips.co.UK/syserrors5.htm

• Flight Simulator 2000 and Combat Simulator flights are loaded on my Windows 7 computer.

  My Flight Simulator 2000 and Combat Simulator flights are loaded on my Windows 7 computer.  Everything seems to work except the control stick.  There are vibrations and the throttle response, but the direction of the joystick does not work.  I just put a new hard drive and Windows 7 in my computer.
  The joystick works well in Flight Simulator 2.  Everything worked OK on Windows xp.

  Hello

  I suggest you to calibrate the joy stick and check if it works.

  1. make sure your joystick is correctly connected to the computer and turned on (if wireless).
  2. open the control panel.
  3. double click on the link of game controllers.
  4. search and unique click on your joystick in the list of controllers. If your game controller is not listed, make sure that it is properly fixed and functional.
  5. with your gamepad highlighted, click on the properties button under the list of controllers.
  6. in the new pop-up window, click the button on the settings tab.
  7. follow all the instructions in the wizard that appears and click Finish when done.
  8. you can also test all buttons and axes that your joystick offers tab Test make you all the buttons and sliders are working before relying on them in an application.

  Check this link for more information:
  http://social.answers.Microsoft.com/forums/en-us/vistagaming/thread/fe074447-116D-4b51-8d90-3a24c7ed5154

  If these steps won't help, then you can contact the manufacturer for further assistance.
  It will be useful.
  Steve.

• Microsoft sidewinder gamepad 2 does not work on the Combat Flight Simulator WW11 and Europe series

  Original title: I have the Combat Flight Simulator WW11 and Europe series. My microsoft sidewinder gamepad 2 does not work on my XP and my Windows 7 computer. The joystick works on CFS2 Pacific. Help, please.

  I have a HP Pavilion p6717c with a radion HD 6900 graphics card. With windows 7 home

  Hello

  1. don't you make changes to the computer until the problem occurred?

  2. you get any error message?

  I suggest you to see link below and check if it helps.

  You experience problems when you use a Sidewinder Force Feedback Pro joystick with Flight Simulator on a Windows 2000, Windows XP, or Windows Vista-based computer: http://support.microsoft.com/kb/294672

  How to fix game controllers in Microsoft games: http://support.microsoft.com/kb/831361

  Items of Combat Flight Simulator: http://support.microsoft.com/combatflightsimfaq

  Also I suggest you to send your request in the below link.

  http://www.Microsoft.com/games/en-us/community/pages/forums.aspx

  Hope this information is useful.

• Open a new file in photoshopcc and the name of the file is displayed but no Web white work. You can see it as a layer in the layers panel and if I pull on the grey area I see int on the layer, but not on the main screen.

  Open a new file in photoshop cc and the name of the file is displayed but no Web white work. You can see it as a layer in the layers panel and if I pull on the grey area I see int on the layer, but not on the main screen.

  Nice day!

  Could you please post a screenshot with the relevant panels visible?

  Not turning off"use graphics processor" in the Performance preference and restarting Photoshop have a bearing on the issue.

  Kind regards

  Pfaffenbichler

• The driver \Driver\AFAmgt failed to load for the device USBSTOR

  Hardware: Dell PowerEdge R515, AMD Opteron processor

  OS: Windows Server 2008 R2 (64-bit)
  Peripheral USB do not work properly.  Manager devices displays the following error:
  Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)
  The observer of events displays the following error has occurred when I plugged the USB key:
  Error in kernel-Pnp, event ID 219
  The driver \Driver\AFAmgt failed to load for the device \Disk&Ven_SanDisk&Prod_Cruzer&Rev_1.02\2006077523163E6032E3&0 USBSTOR.
  Dell recommended running the following updates:

  1 HLDS DP10N external USB DVD Firmware Version A102, A02, published 06/03/12, hard drive option: http://downloads.dell.com/FOLDER98923M/11/HLDS_DP10N-EXTERNAL-USB-DVD-_A02_R318499.exe

  2 AMD SP5100 South Bridge Driver, Version 5.10.10, A00, published 10-22-2010, recommended Windows 2003 x 32 / x 64: http://ftp.us.dell.com/chipset/AMD_SP5100-SOUTH-BRIDGE_A00R262335.EXE (this one may or may not work, initially, the driver is for Server 2003 and I'm not 100% sure if they added 2008 R2 compatibility.)

  3 TEAC DV - 28 s-W 12.7 tray SATA 8 x DVD - ROM Firmware, Version R.2B, A01, published on 26/07/11, recommended problem resolves under RHEL 5 and 6 of RHEL which can cause the Machine error check on PowerEdge server platforms.  Windows & Dos: http://ftp.us.dell.com/rmsd/TEAC_DV-28S-W-12-7-TRAY-SATA_A01_R309483.exe (this one is one I think will do the most good.)

  Any other suggestions?

  Hello

  Thank you for visiting the Microsoft answers community site. The question you have posted is related to Windows Server and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  I hope this helps.

• Windows failed to load because the system registry file is missing or damaged. Status: Oxc000014C

  Hello - anyone can help me find a solution to my problem?

  My problem: Windows failed to load because the system registry file is missing or damaged. Status: Oxc000014C

  I tried everything the sytem advised through SafeMode etc... Also, I tried to reload my OS - last updated through the windows update site. However, he did not - probably because all updates from MS, which means that it would not load from the DVD.

  It's a whole new system customized with MS Vista 64 bit, Office 2007 Untimate, Asus MB, 250 GB HD ATI video card. I used Vista for almost a year and had no problems until today. All of the original software.

  I have my thesis and several files, I was working on someone - I was doing consulting work to supplement my income as a student... Unfortunately, when I finally used my system last night it was ok. Now I canoe get my system up and running.

  Mark Merci for your comments.

  I found myself communicating directly with Microsoft and they were able to get my system up and running without losing me data. Hooray for Microsoft!

  My system is back to normal and I am assuring you that all my files are backed up on DVD.

• "windows failed to load because the nls data is missing or corrupted"

  IM currently using vista, and when I turn on my computer
  the following message appears: "windows failed to load because the nls data is missing or corrupted"

  What does this mean message?

  that means "nls"?
  is my information on my hard drive in danger?
  How can I fix?

  Recovery discs would be Windows Vista installation files.  It would be safe to use if they are needed when the sfc/scannow scanning.

  A recovery disc is a general term for media containing a backup State initial factory or a favorable condition of a computer such as configured by an OEM manufacturer or an end user. OEM supplied recovery media is usually comes with most computers to allow the user to reformat the hard drive and reinstall the operating system and preloaded software as it was when it was shipped.

  http://en.Wikipedia.org/wiki/Recovery_disc

• Windows failed to load because the system registry file is missing or corrupt. - status0xc000014c (Windows vista}

  Windows failed to load because the registry file is missing or corrupt... status 0xc000014c

  Hello

  1. have you made changes on the computer before this problem?

  2. are you able to boot mode safe?

  I suggest you perform System Recovery Options startup repair and check if it helps.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  For more information, see the following Microsoft article.

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Hope the information is useful.

• How can I fix the "Windows failed to load because the system registry file is missing or corrupt.'

  all of a sudden my computer goes from fine to a "Windows failed to load because the system registry file is missing or corrupt."

  and I don't have any idea how to resolve this its driving me crazy.

  I downloaded the iso file for vista, the restore disc but it not start when I restart my computer. what im supposed to do or am I missing something?

  You need to change the boot sequence:

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Sony VGN - NR160E Ultimate laptop. w / Windows 7 Ultimate, failed to load because the c:\windows\system32\drivers\elxstor.sys of the 5.2.10.211 file is corrupted or missing

  I have a laptop VGN-NR160E Sony with an Intel Core 2 Duo T5250 / 1.5 GHz with Vista OEM. It has been upgraded to Windows 7 Ultimate. The former owner has not only any disk, therefore, or I'm doing. I have after I tried to update and got an error this system failed to load because the c:\windows\system32\drivers\elxstor.sys of 5.2.10.211, the file is damaged or missing, I tried all the computer in repair and drives the ISO of Windows 7 options, I need help by someone much more intelligent and savvy than me in computer science.

  You have a pirated copy of Windows 7 Ultimate on your system. You must install a genuine copy.

• My mouse is stuck on the main screen (add pictures)

  I'm used to 2 monitors, and I want to keep it this way. So I implemented a QUANIX monitor I have via HDMI to my Sprout.

  I have extension success of two monitors. but my mouse cursor is stuck in the main screen of Sprout.

  If I drag a window to the next screen, the window can move to the second monitor. but my mouse cursor is stuck on the first monitor.

  How can I solve it?

  Please help me... T_T

  (You can see in detail through below the images)

  monitor 1: HP all-in-one

  Monitor 2: horizontal HP

  Monitor 3: MON-SIS330 (QNIX QX2400)

  Current value of monitors

  

  captured when dragging a window to the next monitor

  

  I can find the solution to another post. Sprout Service stop and I can't success using extended display.

• I use iPhoto and have more than 6,000 images in the main library.  I have 7000 images in my iPhoto trash, some of which are duplicates of images in the main library.  If I delete the Recycle Bin will be double in the main library also deleted images?

  I use iPhoto and have more than 6,000 images in the main library.  I just realized that I have 7000 images in my iPhoto trash, some of which are duplicates of images in the main library.  I need to remove the iPhoto trash, but if I take these are images in the main library deleted duplicate or are they "separated" as soon as they are to the iPhoto trash?

  Empty iPhoto trash removes only the versions in the trash, not the versions that you still have in your events.

• problems of registry Vista-"windows failed to load because the system registry file is missing or corrupt"

  introduced a new card mother but used to winows full vista it tells me "windows failed to load because the system registry file is missing or corrupt" I can't fix it some trys to reinstall nothing helps, what I do is never had this problem b4?

  my disk is scratched then put xp on site

• I've lost the main screen for photoshop! I don't know what I did, but now when I open photoshop, I get only the tool bar at the top and a little on the sides. How can I go back to the normal screen?

  I've lost the main screen for photoshop! I don't know what I did, but now when I open photoshop, I get only the tool bar at the top and a little on the sides. How can I go back to the normal screen?

  Hi renaeb,

  Would you go to the Windows menu in Photoshop and check the option framework application from the drop-down list.

  Concerning

  Sarika