LATITUDE DE820 wiped out loaded XP drivers DELL & SW, no access to the network

Similar Questions

• Error - Windows cannot login because your profile cannot be loaded. Check that you are connected to the network and that your network is working properly. Unable to log-in to the guest account

  Original title: problem: Guest account does not work even after activation due to profile problems.

  After you activate the guest on this system account tries to log in under this account to fail with the message "Failed to load the user profile". According to the information I found online about this error, I checked HKLM\Software\Microsoft\Windows NT\CurrentVersion\ProfileList to see if a key exists since comments (it isn't). I also checked the Windows application log and found the following entries:

  • Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to the C:\Users\Guest\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm location. This error can be caused by network problems or insufficient security rights.

    DETAIL - access is denied.

  • Windows cannot find the local profile and connects you with a temporary profile. Changes to this profile will be lost when you close the session
  • Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to the C:\Users\TEMP\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm location. This error can be caused by network problems or insufficient security rights.

    DETAIL - access is denied.

  • Windows is unable to login because your profile cannot be loaded. Check that you are connected to the network and that your network is working properly.

    RETAIL - only part of a query ReadProcessMemory or WriteProcessMemory was completed.

  The path of the C:\Users\TEMP does not exist, and the sqm file specified does not deny entries in its ACL, just full control to the SYSTEM, LOCAL SERVICE, my admin account and the Administrators group.

  I'm running Windows 7 Ultimate x 64 edition.

  Christopher S. Charabaruk

  Well guys,.

  The simplest solution is to read what the error.

  "Cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm"

  I tried a lot of suggestion, but delete the file crazy and that's all working again.

  Beter first remove windows live as well. I only have the first and received the message that something is wong with the installation.

  Hope this has been helpful.

  Commander Paul

• Bought CS5 in 2010; hard drive failed and wiped out CS5; No download to replace; need to finish the book. What should do?

  I bought InDesign CS5 download in 2010 and have been using it to create books. A week ago my hard drive failed and had to be replaced tus destroy my copy of CS5. When I went to the website of Adobe & my account, I found that there is no download available. I need CS5 to finish a book I worked on. Adobe has copies of replacement of CS5 I can buy? What do you recommend as the best way to replace my CS5?

  You can download the products Download Adobe Creative Suite 5CS5 installation programs, just make sure that you choose the download that matches your license.

• Remote access to the network when AAA server is out of service help

  Hi all, I have a Cisco ASA 5510. I configured Cisco Anyconnect to authenticate via IAS from Windows. We recently had a server crash and I tried to control it remotely and via anyconnect and couldn't. Once the IAS server came, I could come back in the network.

  Y at - there a command that I'm missing that will allow me to connect to the network, even if my AAA server fell Anyconnect?

  Here is my part of the config AAA command...

  RADIUS protocol AAA-server WindowsIAS

  Max - a attempts failed 5

  AAA-server host 192.168.2.15 WindowsIAS (inside)

  XXXXXXXXXX key

  RADIUS-common-pw xxxxxxxxxx

  Thanks in advance... Dan

  Dan,

  Try to add the LOCAL keyword to your authentication server group statement in your group of tunnel or group policy.

  http://www.Cisco.com/en/us/docs/security/ASA/asa90/command/reference/A3...

  Thank you

  Sent by Cisco Support technique iPad App

• Out of browser-based Airhelp does not open in the network location

  Hello

  I was wondering if anyone can help with the following problem:

  I want to activate the internal evaluators open my help based on a browser of AIR in a shared network location. Currently, in order to open help, examiners must proceed as follows (which seems quite complicated):

  1. create a folder on their local systems: \Macromedia\Flash Player\ #Security\FlashPlayerTrust.

  2. stick the folder in the file RoboHelp.cfg (containing the network path to my index.html AIR help file).

  I derived the steps above to the procedure provided for by http://help.Adobe.com/en_US/RoboHelp/RoboHTML/WS1b49059a33f77726-484da80912ce87f5f33-8000. html

  Is there a way to avoid having to do the examiners perform these steps in order to access using AIR on a shared internal network location?

  Looks like a very involved process to just check that others in the company can open and test it. Is they do not do this and they click on the index file, it seems that the help opens, but then hangs on a blue and gray box with a progress bar that never moves.

  Thank you!

  Hello again

  erinforum wrote:

  Hi Rick,

  Thanks for the reply. We use Tech Comm Suite 3 (Robohelp 9). We could continue on the road to examine the content of the PDF, but we need our QA reviewers the opportunity to test the output of Airhelp browser based in different types of browsers. That's why we want to display the files somewhere and give them the opportunity to open them in different browsers.

  Thank you

  In this case I might suggest that you find a way to deploy to a web server via a URL that is not published. Just provide the URL to your testers.

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7, 8 or 9 in the day! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• HP OfficeJet 6500 (not wireless) times out on the network after various periods of inactivity

  Hello

  As the subject says, I have a HP 6500 from JO that will expire after a random period of inactivity on the network.  It will not respond to print jobs, pings, http for its Web page requests, or scan nmap.  Stop/restart the printer temporarily resolves the issue until it times out again.  I think it is not related to drivers, because there is no need of drivers installed on a machine on the network.  Anyone has any idea on what this could be?  Has anyone experience this problem?  I have no history of problems of auto-negotiation on my network (I am dealing with devices at work who do not play nice with auto-negotiation, and the only option for them was to put it to manual), but just in case, I changed the setting manually set to 100 Mbps Full.  Having just done this, I do not have yet to see if this changes what anyone, but I want to see if someone else has all possible solutions.

  Thank you.

  It seems that the static IP address has been resolved - it has not yet expired since I put it.  It seems that he fixed - lease DHCP renewal seems to give this printer problems.

• Using too much CPU only when loading the network

  When FF works closely with the network (wired or wireless) card for access to the network, CPU utilization spikes in way more than 70% and he stayed there until the page loading process finishes web.
  After the upload is complete, the CPU usage remains somewhere between 5-10%.

  When I look at clips youtube 1080 p, where FF is duty next buffer part of this clip I watch, new CPU use peaks above 70% with the flash plugin and gives a total of a 100% of cpu for a few moments and use which make this clip to stop playing or to frame bad times, and ties.

  I have been activated in about: config webgl acceleration to activate the force and that much improve the initial problem, then I activated gfx.direct2D - activated force and also to improve the problem remaining.
  I also disable the safe_mode parameter file adobe flash config protectedmode = 0.

  I have to mention that the initial problem was way to bad ... 
  

  Now I get to point when I don't know what to do so that FF does not use much CPU loading pages.
  As you can see I use to publish this version of Nightly 64 bit (I think it's the 64-bit version...) which is much more better and I would like to read youtube 1080 p clip normally, after that I have wait a few moments to buffer, before starting to play.
  Version 32 bit FF won't let me watch YouTube without framing hurt when the clip is buffered.

  I was monitoring the Task Manager and all the processes listed... and there, I can't blame antivirus or firewall to the peaks of the processor. Also if I do the rest of the network traffic, as well as inside the network custom CPU even file copy flinch.

  Can someone help or give an opinion on what setting to do, so I can eliminate these spikes?

  Thanks in advance!

  Problem solved partially:

  I have observed that the CPU spikes occur not only while I use FF or mozilla nightly, but on all web browsers (Chrome, IE, Opera, etc) that I have used, while these browsers accessing the network.

  Uninstalling the firewall of the solution of the AV portion has helped a lot and by also disabling the bed in the firewall solution of W7, but for long term use, this isn't the right answer (for my at least). Without any firewall FF work or installed works like a charm, while the CPU usage is increased at a decent level of 50% max (total tasks and running services)!

  Anyway, as I said earlier, my pc without any firewall operation is not a good think to do, so I'll replace my computer with a faster, or I'm going to overclock it at a level that zapping INTERNET and navigation will not infringe too much on the performance of the system, or... I live whit it and I accept the limitations...

  Perhaps, in the development of the FF, programmers will keep in mind that not everyone on this planet has powerful processors - and... give a few options... to decrease the CPU at acceptable levels, event, even if they use the firewall solutions that violate on the CPU while FF is buffering of data across the network.

  I should also mention that Mozilla nightly (64-bit) and FF, are always better then IE - in my opinion - which is.

• After my gateway mD2614u (64bits WHP) OS was wiped out by the virus and "projected blue" I installed my old version (Gateway), Vista 32 bit... it will be good?

  After my gateway mD2614u (64 bit WHP) OS was wiped out by the virus and "projected blue" I installed my old disk of Vista Home Premium 32-bit (gateway) to try to recover the operating system to 64-bit in fact somehow, it works fine after installing the network drivers appropriate. Would it be possible to retrieve an original os status or should I simply buy the disk recovery, or just be it? I know that tmi!

  # Migration from 32-bit to 64-bit Windows is OK but one backward migration is a problem because the 32-bit version of the installer cannot delete some items of 64-bit.  It produces a mixed version where you have taste strange anomalies a folder programs (x 86) and a programs folder.  Vista 32 bit shouldn't have a programs (x 86) folder.  Only 64-bit Vista has that.  He there's other, less obvious, issues.  Although you can retrieve files from the Windows.old folder the BONE itself is not trustworthy.  I tested the backward migration during the program Vista TechBeta and script scenarios has never supported by Microsoft Support after RTM due to 32-bit installation being unable to deal with the structure of the 64-bit system to remove.

  You must order the 64 bits of the gateway recovery disks (if still available) or a third party such as Recovery - Disks.com.

• Problems of latitude 10 with Wacom tablet PC drivers

  I am the owner of a Dell Latitude 10 and last Friday, by mistake, instead of installing the driver with v720-10 recently published by Wacom, I installed the Asus with v720-9. As a result, the active pen no longer works correctly: when moving from the tip of the stylus on the screen, the cursor appears and disappears at random and never close to the tip. The stylus is now absolutely unnecessary and, because of his erratic behavior, it is completely impossible to calibrate it.

  To remedy, I restored it first my tablet to an earlier point in time and it does not solve the problem. Then I am in contact with the Dell Customer Service Spanish and they first had me install the latest versions of the pen drivers and, seeing that it does not solve the problem, they end by sent me a new digitizer in case it was a hardware problem, but this does not solve the problem.

  Then I refreshed the system without affecting my files, and because the problem persisted, I finally removed everything and reinstalled Windows 8 completely erase the data, but the pen still does not work. The rest of the Tablet is OK, even the touchscreen works well.

  Now, I do not know what more I can do in order to get the digitizer repaired. In another forum, I have been informed that the version of Wacom Tablet PC with v720-9 ruins of the pen on the Tablet sensor (Latitude 10 is one of those who may be affected) and that the only solution would be an update of the firmware from Dell. Can anyone confirm that this is right? Is it possible to fix it?

  Hi @HBEN,

  The update of the firmware is available for you at the following address:

  https://dl.dropboxusercontent.com/u/4818467/Wacom%20Soluci%C3%B3%20-%20WTW%20FW%20update%20FW0233.exe

  Here are the installation steps:

  -Uninstall any driver from Wacom
  -Run the update tool
  -If the update tool indicates 'No response' then update, do not close the tool, it works in the background.

  I was told it would auto close when it's over. In my case, it appeared an error message. I waited for two or three minutes, and after restarting the tablet pen came miraculously alive again.

  Good luck

• Cannot load a printer Dell Photo 966 on my XPS Ultrabook

  Cannot load a printer Dell Photo 966 on my XPS Ultrabook

  Hello
   
  -You receive an error message trying to connect to the printer?
  -Did you install the required drivers for the printer provided by the manufacturer?
  -Did you do changes on the computer before this problem?
  Method 1: I suggest you follow the steps to run the troubleshooter from the link and check if this solves the problem.
  Open the printer Troubleshooter:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
  Method 2: I see that the drivers are available only for Windows XP and Windows Vista versions, but not for Windows 7.
  http://www.Dell.com/support/drivers/us/en/04/DriverDetails?driverId=R145450
  Then, I suggest you to install the drivers in compatibility Windows XP Service Pack 2 (SP2) mode and check if the problem persists.
  Make older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
   
  For reference:
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  Hope this information helps.

• Firefox on MAC, but some use of Hospice Toolbar, YT. YT often gets wiped out.

  With the help of Yahoo running on Firefox, I have a secondary Yahoo toolbar. Recently he got very often wiped out. During the
  Firefox is updated for example. More recent Yahoo toolbar resets the default without my additions after that some start ups.

  HI DonA32,
  Firefox update removes the toolbars.

  You mentioned, "More recent Yahoo toolbar is by default without my additions after that some start ups."

  After a refresh, add ons can be added to the return of the old folder of Firefox on the desktop data: back up and restore the information contained in the profiles of Firefox

• Refresh wiped out all the bookmark and browser settings

  Firefox suggested I do a Refresh to speed up the browser etc. I did it and everything has been wiped out. Firefox logo appears in the start bar but when I click on it see no firefox browser, totally empty tabs. All the bookmarks wiped out all three browsers I use: Firefox, Google Chrome and Internet Explorer. I'm totally in trouble.

  When you reset Firefox and a new profile is created and some personal data (bookmarks, history, cookies, passwords, data form) are automatically imported and the current profile folder will be moved on the desktop to a folder "Old data Firefox".
  Installed extensions and other customizations (toolbars, Pref.) that you have made are lost and must be redone.

  It is possible to retrieve the data from the old profile, but be careful not to copy the files corrupted to avoid transporting more problems.

  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  Do a clean reinstall and delete the program folder before Firefox to (re) install a new copy of the current version of Firefox.

  • Download the full Firefox installation program and save the file to the desktop
    https://www.Mozilla.org/en-us/Firefox/all/

  If possible to uninstall your current version of Firefox to clean the Windows registry and settings in the security software.

  • Do NOT remove the "personal data" when you uninstall your current version of Firefox, because this will remove all profile folders and you lose personal data such as bookmarks and passwords including data profiles created by other versions of Firefox.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • (32-bit Windows) "C:\Program Files\Mozilla Firefox\"
  • (Windows 64 bit) "C:\Program Files (x 86) \Mozilla.
  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  • http://KB.mozillazine.org/Uninstalling_Firefox

  Your bookmarks and other personal data are stored in the Firefox profile folder and will not be affected by a uninstall and (re) install, but do NOT delete personal data when you uninstall Firefox which removes all Firefox profile folders and you lose your data.

  If you keep problems also create a new profile.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and allow your firewall to ask permission to get access full and unrestricted, again to install for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/fix-problems-connecting-websites-after-updating

• 9.1.3 update wiped out my apple ID

  9.1.3 update wiped out my apple ID, I tried several times to access my original account who 5 years also lost in my notes, important information

  all released for the games have gone, photo all gone, all the friends on line went app.

  I will never again after that Apple has caused the problem in the first place, if the activation server was working properly when he should have, I would still have my original account.

  I don't know how or why you would lose your Apple updating the iOS software ID. This seems rather unlikely to me. I'm not doubting that you experience a problem, but as far as I know, it is impossible to lose your ID. Perhaps if explain you in detail what happened and what you're trying to do to collect the ID, we may be able to help.

  You have several Apple ID? You made your original ID defence and that leads me to believe that you have more than one.

  You can also try to contact Apple for help, if this is beyond anything that you can do yourself.

  Contact Apple for assistance with the security of the Apple ID - Apple Support accounts

• My speakers on my Dell Latitude D820 suddenly emit only a low sound. I adjusted all the volume controls in the menu sounds from the Control Panel, and there is no change in volume.

  Low sound volume

  My speakers on my Dell Latitude D820 suddenly emit only a low sound. I adjusted all the volume controls in the menu sounds from the Control Panel, and there is no change in volume. It's real power radio on the internet and play music from a CD inserted into my machine. The sound icon does not appear in the toolbar.  I tried the fixit of automatic Wndows and it ran and said low volume has been set. Not the case.

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  Method 1:

  I suggest you follow the link and check.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=tab02

  Method 2:

  I suggest to follow the link and search for the volume in the taskbar.

  (a) right click on an empty area of the taskbar and then click Properties.

  (b) in the Notification area, click Customize.

  (c) select the volume see the icons and taskbar notifications check box, and then click OK.

  I also suggest you to follow the link and check.

  Change icons appear in the notification area

  http://Windows.Microsoft.com/en-us/Windows7/change-how-icons-appear-in-the-notification-area

• virus wiped out my audio device can not find device manager on computer not where

  virus wiped out my audio device... cannot find device manager on computer anywhere... all said that it works correctly

  Hello

  Please go to the Microsoft Community Forums.
  Because the question is not clear, please answer these questions, which will help us to help you best.
   
  1. you are unable to find the audio device in Device Manager?
  2. are you unable to access the device on the computer Manager?
  3. What do you exactly mean by "everything that says it's working properly"
  4. do you get an error message?

  Method 1:
  I suggest you to download and run Microsoft Safety Scanner and check if it helps:

  Reference:
  http://www.Microsoft.com/security/scanner/en-us/sysreq.aspx
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
   
  Method 2:
  Check out the link and follow the steps in the article:
  No sound in Windows
  http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
   
  If the problem persists, please write to us with the answers to the questions above so that we can better help you.