MAP OF DATA EVDO BSNL UE100 compatibility problem

Similar Questions

• HP Pavilion HPE h8 - 1380t CTO: compatibility problems, ask questions about knitting-by-turn or possible motherboard replacement.

  I recently baught an EVGA GTX 1060, as this 630 became quite long in the tooth and I thought that I would try to future proof myself a little as the rest of my components seem to be working very well.  However, I can't get the map to work correctly on this particular computer.  Oddly enough, I can get past that screen startup finally after several short beeps and let it sit, but it takes fowever to reach the office and clearly is not executed properly that the resolution is wobbly and software from Nvidia cannot even detect the card.  I guess I had got this far because of the onboard graphics of some sort, but AFAIK this motherboard which lacks.

  I know that the card works fine as I tested it in my other Tower, so I struggled to find a solution.  So far, it seems that the problem is most likely the motherboard, as HP does not have a new BIOS for it since the beginning of 2013 (which I did go ahead and install it).  If true, I find myself with either two options, it seems that the ditch system, entirely or find a motherboard that works with all my old components.  I'd rather not have to empty this workaholic, when all other parts work great, if it is not a work around I would like to know if there are motherboards I could pass that would work with the rest of my components.  Normally I would not bother with even apply for, but I hear a lot of chatter on HP PCs pre-constructed having compatibility problems.

  I bought this computer there is in the case of four years that I would be able to update as I do with any other PC, but I didn't know at the time that HP has a tendency to not update the BIOS settings for anything beyond a year which I admit is incredibly frustrating.  What is done is done however, and I want to make this work without having to clear the entire system.

  Desktop HP Pavilion HPE h8 - 1380t CTO

  Model #: B4J28AV
  Serial number: 2MD2290502

  Motherboard: 2ACE "Pittsburgh" Pegatron Corporation

  Processor: Intel Core i7 3820 3,60 GHz 'Sandy Bridge - E.

  RAM: 10 GB of DDR3 memory

  GPU (stock): Nvidia GeForce GT 630 (this is replaced by the EVGA GTX 1060)

  @Faver, welcome to the forum.

  Your problem is the BIOS.  However, it is because the 1060 GTX requires UEFI in the motherboard instead of a standard/Legacy BIOS.  HP didn't start using UEFI until mid-October 2012.  The BIOS may not be upgraded in the UEFI.  The last cards only not for UEFI were the GTX 660/670.

  MSI made cards with a switch that can be used with a Legacy BIOS or UEFI.  If you decide to go this way, you must contact their Technical Support to help them choose the best card for your system.

  The upgrade of the motherboard can be a problem.  HP has taken advice their specifications.  Therefore, they are not necessarily the same as the commercial versions.  Please make sure that the holes in the motherboard matches the accessory in the case.  In addition, some members have had problems with the connectors in the connections case before, for example, the power button.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• I recvd error 'program compatibility problem' for my logitech g27 wheel.

  Logitech G27 Racing Wheel game controller

  I recvd 'compatibility problem program' error for my logitech g27 steering wheel wheel.it has been running for 1 1/2 years.

  Hi, Raceready6,

  You have posted to the Feedback Forum of responses from Microsoft.  This question should be posted in the Forum located here games

  http://tinyurl.com/7rale6r

  Compatibility PlayStation3 game with Logitech G25 and G27 racing wheels

  This table is a sample of a few PS3 popular games released in the United States. If your favorite game is not on this list, the game can still support your Logitech wheel. Contact the developer of your favorite game for information more up-to-date on the wheel support.

  http://tinyurl.com/75y7gxc

  Steering wheel general troubleshooting of game consoles (Wii, PS, Xbox, etc.)

  If my wheel does not work on my game console (Wii, PlayStation, Xbox, etc.), what should I check before contacting support?

  On a console, there are two things to check if a wheel does not work in a particular game:

  • Hardware configuration
  • In-game support for ruffles

  NOTE: If you have a Driving Force GT, and most of the wheel works with the exception of the special as the PS button buttons and Horn, see article 10768 Knowledge Base. If you have a steering wheel Driving Force, and that you are trying to play a game that is inherited from the Playstation (PS1/PS2) on a PS3 console, see article 10767 Knowledge Base.

  Installation of equipment:

  To check your hardware configuration

  1. Turn off your game console
  2. Disconnect the power adapter of the wheel.
  3. If you have a wheel that mounts to a desktop, check the AC adapter cable is firmly connected. A loose connection in the steering wheel unit to be recognized.
  4. Check the working of the power source. Some wall sockets can be controlled by a wall switch. If in doubt, try to plug another device into the wall to check the functioning of the power.
  5. Check that the USB cable has not plucked or separations in the thread.

  In-game support:

  To see if the game is compatible:

  1. Logitech.com is trying to keep a list of the supported games on the product page of each wheel. If your game is on this list, then it is certainly supported. If this isn't the case, you may need to contact the developer of the game.
  2. If your game is listed as supported on Logitech.com, but you can't use your wheel again, your game or console may require an update. It is recommended to connect your console to the internet, and then start the game in question. If your console is connected to the internet, most of the games automatically checks a status update. Try to complete each game, in addition to your console, if necessary.
  3. Try a different USB port. Some games have specific requests of what port should be connected to a wheel.

  Additional information:

  If you try these steps and your drive still does not work, contact Customer Service. The representative may ask you to repeat, or perform some variants, these steps to check the activity of the wheel. Perform these steps with the technician can resolve your case, we recommend following the steps requested by the technician.

  http://tinyurl.com/7lerfvt

• Mapping of data integrator

  Hello friends,

  I recently started learning ODI 11 g. I'm actually map the data from the MySql table that have columns of type decimal to oracle table with number format but Integrator showing exclamation on target columns. The process terminates without error, but it inserts all the data. Help, please.

  I downloaded the screenshot here.

  Thanks and greetings

  Mohamed Ahmed

  Hello

  If you have numbers to decimals on the Oracle side, there should be no problem.

  The warning is probably because the logical length is not correctly set on the columns of data store Oracle in ODI.

  I think that you need to map all your columns to make the interface work properly. If it still works with a status of success and it is not data in the target, check the steps ending with warning as well.

  If flow control is enabled, check that the lines are not all placed in an error table.

  Kind regards

  JeromeFr

• How to migrate VM from\TO Raw Device Mapping (RDM) (data store)

  Hi all

  I have aske on the migration of VM from\TO Raw Device Mapping (RDM) (data store)?

  Thank you all for your support

  If you are using vSphere 5, then you can SvMotion the VM attached to a RDM (physical or virtual) with no problems. This means that only RDM mapping file will be moved to another data store without any conversion of changes on the real disc of RDM.

  Note: Do not attempt to change the format of disc thin or thick, which would cause the RDM disk converter for virtual disk.

  More info here: http://blogs.vmware.com/vsphere/2012/02/migrating-rdms-and-a-question-for-rdm-users.html

  If vSphere 4.x is used, hot and then migrate the virtual machine to another store of data will not change the format of the ROW, only mapping file will be moved. This is true for virtual and physical RDM.

  However, the cold migrate the virtual machine to another Datatore will change the ROW to virtual disk format.

  HTH... Let me know if you have any questions...

• I've lost a number of buttons for google. How long until you've solved the compatibility problem?

  When it asked me to update Firefox it says that he was not currently compatible with the Google toolbar. I lost most of my buttons for Google now. How long will be until this compatibility issue is resolved? Can I go back to the previous version?

  I suspect an extension that you have is not compatible with Firefox 5.

  You can try this extension to override compatibility problems,

  • https://addons.Mozilla.org/en-us/Firefox/addon/add-on-compatibility-reporter/

  If you want to downgrade, see here:

  • http://www.Mozilla.com/en-us/Firefox/all-older.html
  • http://releases.mozilla.org/pub/mozilla.org/firefox/releases/latest-4.0/ - choose the operating system, then the En-US directory
  • Installation of Firefox

• Compatibility problem with Vista and iTunes

  I downloaded iTunes 9 on my Tobisha laptop Satellite last night and put about 2.5 GB of music on it. I didn't upload the music from the internet. I used MP3s, I had for a few years.

  When I went to boot up the laptop this morning the loading process took some time, but it never loaded to the login screen. I just see the bottom of MicroSoft. Is there a compatibility problem with Vista and iTunes? Maybe I put too much music on my laptop?

  Boot in safe mode and delete iTunes and all the music I downloaded would solve the problem? Or it is less simple than that?

  Don't know where to direct this question if any help you could provide would be greatly appreciated.

  Thank you.

  Hello

  iTunes is compatible with Vista and there should not be any problem.
  Yesterday, I installed iTunes 9 on my U400 and everything happened correctly.
  If your laptop can not boot Vista correctly, then you should try the repair feature.

  Turn on the computer and press F8. Now you will see the advanced boot menu.
  Now, you have many choices.

  As a first step, you should try the option called: last good known Configuration (Advanced)

  If this will not help and the Vista will not start then try the option called repair your computer. This option displays a list of system recovery tools, you can use to repair startup problems, run diagnostics, or restore your system.

  If that does not help, then you will need to retrieve the unit using the Toshiba recovery disc or HARD drive recovery.

• If I switch from XP Pro tp Windows will I have program compatibility problems - as with Adobe Acrobat, Corel WordPerfect, MS Office 7, etc.

  If I update to Windows XP Pro tp will be I have compatibility problems of program - as with Adobe Acrobat Pro 8, Adobe Photoshop, Corel Word Perfect X 3, 7 of MS Office, MS Project 10, Blackberry Desktop Manager, etc..  The facility will be transparent by keeping all of my existing files / content? I need to reload any program?

  What version of Windows you are migrating towards?

  Check the compatibility of each program by accessing the Web site of the Publisher. In addition, many companies, such as Adobe, have their own forums which will give experiences of other users to use a particular version of a program on a particular version of Windows.

  If you upgrade to Windows 7 or Windows 8, you can use the compatibility of Microsoft here for a guide Center:

  http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/Home?Language=en-US .

  (I personally prefer to check sites and forums of the manufacturer however)

• Neverwinter Nights Diamond windows compatibility problems

  Origianal title: Neverwinter Nights Diamond works with Vista?  If yes how to operate?  It works with Windows 7?  If so, how? Thank you

  Finally after many years and several accidents have completed Baldurs Gate II and Throne of Bhaal.  Bought Neverwinter Nights Diamond pack 2 years and finally able to load - surprised a compatibility problem does not work.  Even my Baldurs Gate II and Throne of Bhaal worked.

  Hello

  Once I was able to downloadand patch and then run the compatibility problem solver in the programs control panel

  Make older programs in this version of Windows

  I was able to get the game running in Windows 7 and Vista.

  Vista I deleted the shortcut on the desktop, as I had it already installed before finding the compatibility issue.  When I installed Windows 7 I chose not to install the shortcut - according to a thread I had followed.

  The most difficult thing to solve the problem was to find the patch. I can not even find the page it is on, but when I typed

  Installation for Win7vista NWN1 includes links patch - the right page came

  I'll try and copy and paste the link into this but do not know if it will work.  This is the file you need with never Winter Nights Diamond toget it works.

  http://files.BioWare.com/neverwinternights/updates/Windows/English/NWNEnglish1.69HotUUpdate.exe

  The forum was http://social.bioware.com/forum/1/topic/187/index/3341490/1 , although I wasn't able to get the intothat by typing.

  The patch downloaded and installed very easily.

  After you have installed the patch, I ran the "make older programs run in this version of windows" - using XP service pack 2 (Vista) and either 2 or 3 in Windows 7.

  It's located under Control Panel - programs - but I think that the classic view.

  best regards to all the help on this forum

  Wendolyn

• System is giving compatibility problems when DotNet2003 is open

  I installed my version of dotnet2003 version of windows vista SP1 microsoft. When I opened the Dotnet, then it shows a message that it has compatibility problems. Pls Help. Because this operating system does not support the framework 1.1 what I have to do.

  Hello

  ·        You try to install .net Framework or Visual Studio .net 2003?

  If it's the later you are trying to install and run, it is not compatible with Windows Vista.

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=69d2219f-ce82-46a5-8aec-072bd4bb955e&displaylang=en

  Link above provides the same information.

  .NET framework 1.1 is already installed for Windows Vista, you must not install it again.

  How to determine which versions and service pack of Microsoft .NET Framework levels are installed

  http://support.Microsoft.com/kb/318785/

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Maps of data in the program generator

  Hello

  I have a program type of default members corresponding to data cards. I want to feed new data cards in this program regularly. How can I add the cards given to this program?

  Also, I need to create a decision rule for comparing a value filed in touch and then update the contact field. The following types of two actions are visible in the steps of the action 'compare the contact and update contact fields'. How can I associate the data card with contacts?

  Thank you

  Rama

  If you need check a value stored against a custom data object, then using contact with the field of the linked custom object has a filter would be the way to go.

  You can use it as your feeder program comes to create contacts as the default member type and allow maps of data of your choice set to be admitted to the program.

  If you need set the value of a field of contact (IE on the contact record) to "1" then it's simple, if you are looking to update a field on the custom data object with a new value, then you can use the submit form cloud connector and use a "blind" form submission , use it create / update custom data object stage of the process to update your custom with new value "1" data subject field.

  Make sense?

• My purchase is that creative cloud is a ° 16034007400 at the date of renewal, there was problems with the credit card, but the tax has been paid in January. So far I can't use the program or any of its components without Adobe me any explanation on why I

  My the purchase is Creative Cloud is a ° 16034007400 at the date of renewal there are problems with the credit card, but the deposit was paid to January. Up to now I can not use the program or one of its components without Adobe me any explanation on why I can not use.
  Why not allow Use Adobe Creative Cloud?

  : Contact support from adobe for hourly pst by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

• Adobe Reader 5.0 with Windows 7 compatibility problem

  Adobe Reader 5.0 with Windows 7 compatibility problem

  version 5?

  use the most recent Adobe Acrobat Reader DC install for all versions

  Clear mcafee, unless you are sure you want.

• Map UID data store data store name

  Hello

  I'm trying to map the data store name, I can see in the Client vSphere, the UID of right which is used by VMWare to access a data store.

  Basically, what I need is the same output "ls - alh vmfs/volumes /" gives me. But I need to get this information of MAS using the Perl SDK for example.

  I want to create a script that maps these names and user IDS for each host in our vSphere Cluster. We have for the most part, NFS data warehouses but also some iSCSI LUN.

  Can anyone help?

  Thanks and greetings

  woadmin

  You're in luck, I had already written such a script some time back - http://communities.vmware.com/docs/DOC-10706

  For the other useful vSphere SDK for Perl scripts, check out the repository of scripts - http://communities.vmware.com/docs/DOC-9852 of vGhetto

• Compatibility problem XP Dell Wireless 1395 mini-map WLAN driver currently installed Vista Home Edition 32 bit Service Pack II

  Hi, my OS is Windows Vista Home Edition 32 bit Service Pack 2 - installed on XP by the owner without first unintalling XP.  Although my Device Manager lists the mini-map Dell Wireless WLAN 1395 as working properly, what Windows says that it has stopped working correctly because the driver installed is not compatible with my current operating system (just one of the many questions).  Although I can get online wireless most of the time, IE and Google Chrome often freeze and there are a few minutes, I got a blue screen - not for the first time - that shut down Windows.  I note the other error message information that a fatal error has occurred that required Windows stops, so am not sure that the two problems are related or not.  I tried to find a compatible driver for what I assume is a WLAN Mini card for the original XP OS on the compatibility of Vista site, but there is no driver is listed for the Dell Wireless WLAN mini-map 1395.

  I have the Vista installation CD, but not the verification code necessary to reinstall.  It will appear somewhere on this computer under the program or the ancillary system (information) available to administrators?

  Just out of curiosity, there is a feature of rectangular white USB printed with the name "Biogear" attached to one of my ports, although he is not listed among devices on my computer since the computer laptop original owner died and I can not ask what is its purpose or what program it was meant to facilitate. I tried to remove it and it came out (the envelope detached the part inserted into the USB port) without affecting my ability to access the Internet wireless.  An internet search has a line of golf apparel and a few articles in German... Any ideas?  Thanks, Lara

  If the original owner installed Vista on XP, you need to reformat and do a fresh install of Vista or you will continually have problems multipling. If the original owner is an update from XP to Vista it is OK. However, the problems that you're seen suggest the original owner installed Vista on XP. Verification code (if found on the computer) will not be for Vista but for XP. As long as your operating system is installed, you can retrieve the key with Free Key finder software, do a search and you will find them on the internet. Also if you have the CD and ask for a new key to Microsoft you will get it at a very low price, I don't know no current tax, was $ $10,00. Since you are not the original owner (and the first owner died) both of these options may not be totally legal, unless you can provide proof of purchase or the person deseased was a member of the family.