Mapping of IP on WAG160N

Similar Questions

• WAG160N without internet connection

  Before I throw it I thought it might be useful to post here to see if anyone knows more than me about this problem.

  In the meantime, I have another wireless modem of va - working ATM I write/post - isn't all that urgent.

  My WAG160N router/modem I bought new 4 or 5 years, died a few weeks - over a period of an hour, or so he started to work very slowly - slowing to 10 or 20 kB / s from the usual sluggish 150ish KB/s that we normally get here.

  And then it stopped working altogether - and light stopped coming at all on the Internet.

  I pulled out and found 3 or 4 bulging capacitors in (which had burst at its lower end) that I replaced - faced with the horrible HMP weld seems to have been used to join them for the circuit.

  But still no Internet light or connection - other (wireless LAN) and DSL unit lights work, it goes through its startup sequence apparently OK and I can access all of its settings in the 192.168.1.1 page - including trying unsuccessfully to connect from one of these pages.

  It is interesting to try re-flashing the firmware - 1.00.15 currently? - or replacement of another part of the map will be working again?

  All suggestions gratefully - received I couldn't bear to throw a piece of equipment like that without having done everything I could reasonably to operate again.

  TIA

  PaulMW

  Well Saffrons7 you were right .

  And I was a bit wrong - do not understand that the settings must be correct before he was able to connect on the www.

  It was just a matter of re-assignment - and check - all the different parameters (including manual set VPI and VCI) my ISP and bingo!

  He immediately started working again!

  So, as you have said - and I got to halfway, iffen I could get to its router pages could not have been too much wrong with him - this is why I was so keen in seeing iffen I could restart. And also to get a little more networking know-how - which I am a little short on!

  The replacement of the value 2 or 3bananas caps bulging / burst seems to have been the solution.

  I use what I write this - of course - Linux I rarely use winDoze for the internet - as it is said: with winDoze you might as well put all your info on a billboard next to the road. and if you have forgotten your passwords under linux, you might as well format your hard drive.

  But the caps curved several have tended to indicate wear cheaper - which may well fool you again at some point in the future - so it's good to have 2 modems now .

  See you soon

  PaulMW

• WAG160N will not connect to NAS

  Laptop connected wireless to WAG160N, running Windows 7.

  Desktop computer Windows XP connected by cable to the ethernet port on WAG160N,

  I have a storage device (Vantec Nexstar Lx Ultra) network connected by cable to a port ethernet on the WAG160N.

  Both machines have Norton 360 Version 3 Prem

  The Office takes up the NAS no problem.

  The laptop cannot pick up the NAS at all. I tried juggling setting Norton but don't really know what Im doing. The strange thing is, when I plug the phone in via a cable to the WAG160N then SIN comes and works without any problem at all.

  There on the WAG160N that need to be changed to allow a laptop that connects wireless to connect to the NAS?

  Since your laptop are you able to Ping SIN? If Yes, then your, click Start - RUN - type laptop computer "\\NAS IP" and press enter and when you are prompted for the user name and password, type the NAS username and password, and click OK... and he will show you the folder that you shared on your NAS, right click on it and select 'Map network drive' and below check the "Reconnect at logon" box and click Finish.

  Once its done, it maps the drive on your computer and you should be able to transfer the file to your NAS.

• WAG160N problems. Set up?

  HI, I have the Wireless-N ADSL2 + Gateway WAG160N connected to two computers. The computer cable is fine, and this seems to be a great router. However, I have a second PC connected wirelessly with a map of WiFi PCI Edimax EW - 7728 In 802.11n http://www.edimax.co.uk/en/produce_detail.php?pd_id=225&pl1_id=1&pl2_id=44 . Initially, wireless has been brilliant, almost as fast as Wired. But now, it seems to have slowed just browsing Internet is very slow. If I go into the router and change the wireless channel speed increases a little but only for a short period of time?

  I had a search around the forum here and tried a few suggestions but nothing has worked, I don't really know what I'm doing! Can anyone help?

  When I got the router it came with the Wireless - N USB Network WUSB300N adapt, but it never worked!

  All drivers are later as is the firmware. After the update, I completely reset the router and manually entered all the settings.

  Thank you

  Yes, tried. Not good, I'm afraid.

• My iPhone's GPS (maps) does not work correctly.

  Sailing cards is no longer for me, he just tells me to "proceed to the road."  Everyone knows about this problem? I wonder if it's the 10.0.2 update on my iPhone 6. I restarted AND reset my phone. Nothing suits him. Help!

  Hi GreenGator94,

  Thank you for using communities Support from Apple. I'm sorry to hear you are having this problem with your iPhone. I'm kinda not clear about the exact nature of the problem you describe (which is exactly what you see in the cards), but if you continue to have problems you can find information and troubleshooting described in the following article useful:
  

  Get help with maps - Apple Support

  Kind regards.

• Cannot change the partition map you GUID...

  (in Swedish)

  Information enhet:

  Enhetens namn: Samsung SSD 850 EVO 500 GB

  Medienamn: SSD Samsung 850 EVO 500 GB Media

  Typ av average: SSD

  Protokoll: SATA

  Intern: Ja

  Partitionskarta Typ av: APM (Apple Partition map)

  S.M.A.R.T. - situation: Kontrollerad

  Cannot read Swedish but you need create a new partition (which replaces what is on the SSD now) and in the Options, choose GUID Partition Table and under Mac OS extended (journaled) Format.

• Open photo of Photos in the Preview app? Need info GPS and maps!

  Hello!

  I write trip review and to see where my photo was taken (in the maps application), and what is digital gps coordinates for each image.

  Search on google - go, I got that via this pic of opening in 'Preview' app.

  But - I have all my pic in Photos app (automatically imported from my iphone to macbook pro Mac OS sierra).

  so, I can export all the photos, I need, in a specific folder and then, from there, open it in the finder and get my info, of course - but looks silly, I think.

  as I already have this pich in Photos - photo can I somehow open directly from Photos Preview app?

  or obtain the gps position open, where this picture is taken in cards programm (not this small window, which is in the Photos, but wide, Maps application) / and obtain the coordinates of the gps directly via the Photos app?

  Thanks in advance.

  Use the media browser in preview - in the open window on the left down - media = == > photos == > Photos

  or even more appropriate is to buy external editors for extension of Photos in the App store ($0.99) and you can view the pictures in preview when using the hotos

  Photo editing Photos for Mac Extensions

  LN

• Google maps and maps does not not on iOS10/iPhone 7

  Since I have the iPhone 7 and by doing so updated to iOS10 my Google Maps constantly I am at home. I've deleted and reinstalled and it worked brielfy before stopping in a random place, and then finally get back to me at home. The possible reasons for this!

  It is also haopening for me. So frustrating. It is slightly different because he doesn't think I'm home but in random places and his /voice not even always on. It is not up-to-date or for example, if it says, turn left into 4.4 mikes he doesn't know that I have reached the turn. No warning without voice. Nothing.

• Look at the maps app will not stop

  When I look for direction in the maps on the watch application, it will not stop after that. I looked for directions to the airport, and then it does not cancel and kept taking me to the airport. I have ensured the application Maps on my phone was not working and he cancelled it but always watch will not stop.

  I tried it yesterday and now today the watch gives me directions to the airport.

  I tried to remove it from the docking, restarted my watch. Watch app from the phone Checked, but nothing works.

  Hello

  To stop your watch directions: open the Maps app on your watch > firmly press the display > press on for policy decisions.

• I have iphone 5 c. I've updated new version 10.0.2. Now Weather app is working for different cities but does not not for my site which has already been demonstrated in latitude and longitude. Similarly maps application also does not work for my site

  I have iphone 5 c. I've updated new version 10.0.2. Now Weather app is working for different cities but does not not for my site which has already been demonstrated in latitude and longitude. Similarly maps application does not also work for my site.

  Settings > privacy > location Services > confirm you always give permission to these applications to use your location.

  If not, try these standard troubleshooting steps.

  -Reset: hold the Home and Power buttons until you see the logo Apple (10-15 seconds).

  -Restore your iDevice: https://support.apple.com/en-us/HT204184

  If your backup is in iTunes, make sure that it is encrypted.

• How to find directions between two locations other than my current position. I finally gave up and use Google Maps.

  In the latest version of cards, there is not apparent until you find directions between two places when or is your current position. In earlier versions, we enter in two places of departure and destination. In the new version, you enter your destination into a search window, but there is no place to enter a starting location. The application assumes that your current place of residence is always your place of departure. It is a remarkable oversight by designers. Am I missing something?

  If you go to maps, you can search for a location. Once you find the place, press the route button. It is from your current location, but if you type on my position, next: you can change the location that you want the management of.

• Series 2 GPS mapping works is not without an iPhone?

  I tried run/walk with the following applications without my iPhone, but they don't display any map of my route in activity CA. seems like it should always be attached to the phone to follow?

  • RunKeeper
  • Apple training app (run/walk in the open air)
  • Runtastic

  Y at - it a setting that I need to install or configure on the watch or the phone?

  I sometimes test by putting my phone in airplane so my watch mode is on its own, but it still doesn't seem to work.

  At this stage there is no 3rd party apps that have access to the mapping feature. Only the application of the workout gives you a map.

  That said, when you did the run/walk outdoors with your phone in airplane mode did you your watch out of airplane mode? When you put the phone in airplane mode, it should automatically put the watch in airplane mode as well. I ask because that how to turn off the GPS as well in airplane mode. And of course if the GPS is off you would not get the plan...

• Maps app

  Previously, you could search directions between two locations on the Maps app by entering in these places. This possibility seems today disappeared and directions are only available between your current location and your destination. How you search for meaning between two places, which one is not your current position? Would be nice if this ability has been returned to the search box. This is handy when you are planning a trip in advance.

  The functionality is still there. Type the words "My position" in blue. It will bring to the top of the search box.

• Change the volume of the voice in ios10 in-app maps

  It has been easy to change the volume of the voice when it is in the maps app, I usually change much depending on where I was on a trip. I can change it in settings/cards, but I can't find where to do this in app. I need continually to expose the card settings app when using cards is crazy! Have I missed narrowly which do this?

  Ah, found it! Lift the lower tab "arrived" when he headed - geez that was easy.

• iPad 6 will link to google maps when off the grid

  My iPad 6 will link to Google Maps when I have wi - fi, cellular and wi - fi Assist turns off? I want to test OK cards before the holidays, and my iPad still seems to allow Google Maps. Thanks for your help.

  Only if you download and cache the maps of the area you will be in advance.  Google maps, as cards of Apple, is a display of live stream for visual mapping data.  But if you're looking for the Gizmodo and others tutorials on how you can cache a limited amount of data Google Maps for offline use.

  Otherwise, you're better off investing in one of the applications offline maps - IE. cards apps that include download (able) full card displays for guidance in offline or navigation.