MapViewer in OBIEE - infowindow not coming not for all zoom levels

Similar Questions

• Image Viewer does not offer native zoom level unless layout.css.devPixelsPerPx is set to 1.0, which makes all the tiny interface.

  Asked me to shake my question in one sentence, so this is.
  Image Viewer does not offer native zoom level unless layout.css.devPixelsPerPx is set to 1.0, which makes all the tiny interface.

  DevPixelsPerPx is - 1.0 by default, which causes Firefox to scale with the parameter of the BONE, which is perfectly fine. The problem is that it causes also open image files and especially the zoom level, nationwide also identical to the user interface. A zoom level is adapted to the screen, the other is native. (One is a magnifying glass with a '+', the other a '-'.) Or rather, the other * should * be native, but in practice, it is not native, is climbed by the setting of the BONE, making it as arbitrary and fuzzy like any other level of zoom, which defeats the whole point and does not allow access to a native scaling in any reasonable way.

  If you want to experiment, here is something you can try, a bookmarklet that inserts a 'Native' button on the page. It takes into account your level of "net" zoom current and reduced the image natural dimensions.

  (1) select and copy the following script:

  javascript:var btn=document.createElement('button'); btn.style.cssFloat='right'; btn.appendChild(document.createTextNode('Native')); document.body.insertBefore(btn, document.body.firstChild); btn.addEventListener('click', function(){var img=document.querySelector('img');img.style.transform='scale('+(1/window.devicePixelRatio)+')';}, false); void 0;

  (2) right-click a task on your bookmarks bar or, if you do not display this bar, click on the bookmarks menu button and right click a place there, and then click new bookmark

  (3) paste the script in the location line

  (4) assign a name like native, and then click Add a bookmark

  While you look at a picture, click the bookmark (let) to inject the button. Then click on the button to resize the image.

  Success?

  If you change the zoom level of the 'page', click on the new button to resize it due to the change.

• Email campaign confirm the Outbox not appearing is not for all sites

  We have a client that handles two different sites of BC. It manages from the same PC. When sending E-mail campaigns for each, sending confirmation dialog box does not appear at a single site, but appears as it should be for the other.

  Yet once, it uses the same count and the browser to manage the two sites, but the confirmation box does not appear for either of the two sites. We cannot reproduce the problem on our own computers (Mac).

  Someone has an idea of what could prevent the area confirm on the site? Of course, without it, he cannot complete the e-mail campaign.

  Thank you!

  Try to clear the browser cache and delete cookies. It's always a good start when you have problems with a browser to specific computers.

• Reporting Developer Portal works is not for all rooms?

  See something interesting:

  In https://portal.collaboration.adobelivecycle.com/ I see reports that generate only for rooms that were created manually (I created the dev portal, the rest of the rooms are dynamically created):

  

  
  All the room generated dynamically have the following reports:

  

  
  The rooms created manually are the following reports:

  

  Alex G.

  Hi Alex,

  Few things to note:

  1 / the records that have been created (and read) pre-release will be inoperative and will have no data usage associated with them.

  2 / use of "My recordings" will only display data of use reading (occurred during playback of a recording).  Usage data in a meeting room registration process belongs to a meeting.

  Hope this helps,

  Nikola

• Change wordSpacing not for all instances of a police

  Hi all

  We try to work around the poor wordSpacing in one of our corporate fonts. What I would ideally take place is every time that you create the text by using this particular font, the wordSpacing would establish min 100%, desired 120%, 150% max.

  Creating a style sheet for this with all the others being based on it is not in the Bill as it is to heavy for staff jr. to systematically apply.

  Is it possible to do this?

  Thank you

  Matt

  As others talk, this is not really a very good idea. This script

  app.findTextPreferences = null;
  app.findTextPreferences.appliedFont = "Roman\tItalic" again

  foundItems = app.activeDocument.findText ();
  for (i = 0; i
  {
  foundItems [i] .minimumWordSpacing = 100;
  foundItems [i] .desiredWordSpacing = 120;
  foundItems [i] .maximumWordSpacing = 150;
  }

  is that what you are asking and a little more: wee is a paragraph attribute, then it changes all the paragraph where this particular police is used, and leaves the others unchanged.

  If the word spacing is the only problem (aka the size just the space characters), you can try to search for and replace only the spaces of this font with another font, or - to completely halt its width - a character style where you tampered with adapted horizonal greatness.

• my computer dell laptop has a built-in webcam, but it is not for all Web sites.

  On some websites my webcam won't turn.  It is on Yahoo and AOL, but other less popular sites on what is wrong. Why?

  Hi Peter251,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  (3) what websites you are talking about?

  (4) you get an error message?

  I believe that you use Internet Explorer as your web browser, let me know if it's something else.

  You can see the steps in the link below that addresses this issue by Shinmila H

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/webcam-works-on-some-sites-not-others/78df0982-81EA-4754-a8af-3433b12f0796

• Option of overflow in CSS for every page HTML (not for all pages)

  Hello

  I'm creating a Web site with a page that I need to add a vertical scroll bar. I'm working with div and CSS. I know that I can add a text overflow option to the CSS, but then it affects all other pages of my Web site folder. I want only the vertical scrolling, it presents a particular page. Please can anyone suggest how I can do this?

  Thank you in advance.

  M

  Thanks for the link.  Try this instead of what you have now.

  CSS:

  / * styles specific page go here * /.

  {#centreContainer}

  Overflow-y: scroll;

  }

  #centreContainer h3 {}

  do-size: 36px;

  Color: #333;

  }

  HTML:

  Some of my favorite links

  • a link
  • a link
  • a link

  Lorem ipsum dolor...

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• TAB key does not work for all elements in forms 10G

  My dear, all I use form 10G.
  I have 10 fields.
  I put property in all previous navigation item elements and the order of the day navigation correctly.
  But when I'm by pressing the TAB key, the cursor does not to another element.
  It works for some fields, but not for all.
  
  What could be the problem?
  
  Published by: LuKKa Sep 24, 2010 13:56

  do you have the encodings in key-next-item trigger in one of your items?

• First Elements 11 - stabilizer video does not limit to zoom

  It is apparent from the description in the help document and tutorials for this purpose that the selection limited to zoom will limit the degree of stabilization applied to selected zoom limits.  The intention is to limit the appearance of edges in movement in the final video.  I have a video of diving where I try to use the function of stabilizer.  I think I entered the stabilization settings correctly (smoothing 24, use of original background, zoom 121, limit the correction to enlarge).  I save the video as a MP4 file using the default settings.  I discovered the file resulting in Windows media player and all the edges of the video dance in and out of the picture.  I do something wrong or are my expectations wrong?  Help!

  Ideally, you should set the smoothing and check the limit to only Zoom box. Do not set the Zoom level.

• Icons are not displayed properly in Gmail when the zoom level is between 150 and 200%

  Icons in Gmail will not correctly displayed in Firefox at all zoom levels. The problem does not occur in less than 150% zoom levels or levels of zoom to 200% or more. Levels of zoom between (150%) correct icons are not displayed until the mouse passes on their location.

  The attached pictures show screen shots to 140% (OK), 150% (problems shown, before moving the mouse), 150% (problems shown, after moving the mouse), 190% (problems) and 200% (now OK again)

  The problem was not resolved by disabling extensions, go to mode without failure or update Firefox.

  Firefox and extensions/plugins are all fully patched.

  You can try to disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  You will need to close and restart Firefox after enabling/disabling this setting.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

• Netflix/Silverlight support for all eternity Syndrome

  About half of the shows that I watch on Netflix are affected by what I call the syndrome of "load for all eternity. He played for 5 or 7 minutes, then start of loading and will never get more than 0%, unless I refresh the page, then 5 to 7 minutes later does it again. But NOT for all the shows I watch. I tried to uninstall and reinstall Silverlight, but that has not worked. I use a Qosmio X 775 with Windows 7, I have a strong inclination, it's the laptop or a problem of Silverlights, because my husband watch netflix on our pc with the same wireless, and it has no problem.

  Doesn't make sure that no firewall or internet security thing is trying to block.

• EventHandler process post for all the user records in the system target

  Hi Experts,
  
  My environment: IOM - 11.1.1.5, Sun Directory Server - 5.2
  I did after,
  
  1. implement the recon trust with Sun's LDAP
  2. I was able to read the sun ldap users to the IOM
  3. I wrote the post event handler process for updating the user password. It works fine if the connector gets only a new user
  4. size of the batch = 0, in iPlanet Planner recon trusted user.
  
  My Question:
  
  In my target system, I have 100 users, for recon trust I need calling the game/Manager events vertical process of post for all 100 records and update process. Now, it runs only for the last record not for all records.
  
  My event handler is,
  
  <? XML version = "1.0" encoding = "UTF - 8"? >
  < eventhandlers xmlns = "http://www.oracle.com/schema/oim/platform/kernel" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" xsi: schemaLocation = "http://www.oracle.com/schema/oim/platform/kernel orchestration - handlers.xsd" >
  <! - custom event handlers process post - >
  < class = "Manager com.custom.eventhandlers.CustomPostProcessEventHandler of shares" kind of entity = "User" operation = "CREATE" name = "CustomPostProcessEventHandler" order = "8000" stage = 'postprocess' sync = "TRUE" / > "
  < / eventhandlers >
  
  I do with sync = TRUE-> FALSE?
  
  Please give your suggestions.
  
  Thank you

  The event handler will trigger in the BulkExecute. In this code, you must loop through all entries and not just the last.

  You do this in your code?

  -Kevin

• Guests of dashboard does not not for some table

  Hello world

  I'm on OBIEE, the latest version and I was faced with a problem with the guests of dashboard.

  The schema is built progressively to the RPD. It's all in one area.

  I created a quick dashboard for the "Global ID" and the "Time range" using between operator.

  Guests of dashboard has worked for first two analysis I built. However, I have added a new table to the diagram and apply the same guests of dashboard, but it does not work.

  However, if the use of filters for the dash prompt and hardcode the Global guest and time range, I get the result.

  I still don't understand as to why the guests of dash wouldn't work for this analysis.

  I was able to use a variable presentation for the GlobalID from the dash prompt, and that seemed to work. But it does NOT for the time range.

  Appreciate any understanding to solve the problem.

  Hello

  I think that it doesn't work because of the type of data that you use in the time column.

  Try the following:

  1. create a calculated column in the concatenation of the year and the month of the RPD

  Example: mount (trim (cast ("YEAR" as char)): trim (cast ("MONTH_ID" as char)) under the number)

  change the fields of the YEAR and MONTH_ID to their respective

  2. replace your prompt 'slot' for this calculated column

  3 - in the analysis replace this column in the filter applied to the parameterization.

  As we are now working with the number data type, we can do between.

  Hope this helps

  Felipe Idalgo

• 10g - what makes OBIEE does not cache files in the cache folder?

  Hi, experts,
  
  I would like to know
  What makes OBIEE does not cache files in the folder cache VIEW OF REQUEST (reports on dashboard)?
  
  of course, I activated the cache in nqsconfig.ini

  a few reasons why a query is not cached in obiee are:

  1. None of the tables involved in should be deleted from the query caching. Check the options for this option of caching of the physical layer.
  2. cached queries must follow all the presets in nqsconfig.ini. For example, size of cache entry, etc...
  3. the request must not contain functions such as current_timestamp, current_date, random functions, etc...

  I hope this helps.
  -bifacts :-)
  http://www.obinotes.com

• dba_segments discovers does not not for a particular tablespace

  Hello
  
  I use 10.2.0
  
  I exported my diagram to use expdp to schema B using the following syntax...
  
  Directory = datapump dumpfile = expdmp.dmp patterns expdp system/pswd = a = datapump logfile: stay .log
  
  Directory system/pswd Impdp = datapump dumpfile = expdmp.dmp remap_schema = a: b
  
  There were 3 tables in A schema and all tables exported successfully to diagram B.
  
  The default nom_tablespace for schema B is 'IMP'.
  
  but, when I ask...
  
  SQL > select nom_segment from user_segments WHERE where nom_tablespace = 'IMP ';
  
  no selected line
  
  nothing is coming... but when I query using user_tables or user_indexes show all segments in the storage space.
  
  SQL > conn B
  Enter the password:
  Connected.
  SQL > select USER_USERS from user_users where username = 'B ';.
  
  USER_USERS
  IMP
  
  SQL > select table_name from user_tables;
  
  TABLE-NAME
  TABIDX
  
  SQL > select index_name user_indexes
  2;
  
  INDEX_NAME
  TESTIDX
  TESTIDX2
  
  SQL > select nom_segment from user_segments WHERE where nom_tablespace = 'IMP ';
  
  no selected line
  
  I logged on as user sys and tried dba_segments, still no luck... Why is it so
  
  SQL > show user
  The USER is "SYS".
  SQL > select nom_segment from dba_segments where nom_tablespace = 'IMP ';
  
  no selected line
  
  =======================================
  
  This query works for all other storage spaces in my system. Why is it so?
  Help, please

  Try this

  Select tablespace_name from WHERE user_segments where nom_segment = 'TABIDX ';

  for the datapump import, you can use REMAP_TABLESPACE = source_tablespace:target_tablespace to remap things I do not think that the old exp/imp method to grant only contingent on th tablespace default eusers still works.

  Chris