Masking of Poplist values during execution

Similar Questions

• capture dynamic values during execution

  Hello
  
  He is delighted.
  
  I work with Oracle application testing suite. I was able to create functional scripts. My request, which I have been job genereates dynamic ID. I want to use these dynamic IDS later in my application.so I want to capture these ID in a variable. Can someone help me please how to store the ID in a variable.
  
  Thanks in advance...
  

• Pass the value of the variable during execution

  Hello
  
  I have a package with a set of interfaces and three other variables.
  
  I want to pass the value of the variable at runtime, based on the value passed I want to decide which interface to run then. How can I do this? I got a set variable but I want to asssign the value during execution.
  
  Any help is greatly appreciated.
  
  
  Thank you
  San

  You have many options to achieve this goal.

  1. keep the run settings in the database, extract the Variables in a time of refreshment and use these variables in your Interfaces to get values of execution.

  2. change the value to the variables on the outside. You can declare a variable in a package as a step of the statement, and then use the variable in your interface in a successive step in your package. Then, create a scenario of your package and creating the scenario, it will prompt you to include the variables that you want to include as a startup parameter. Choose the one (s) concerned. Citing this scenario using Java or an OdiStartScen command or by using Webservices ODI externally, you can provide values of the runtime as a result.

  I hope this helps.

  Concerning
  A

  Published by: 922636 on August 29, 2012 23:53

• How to change values listbox during execution

  Hello

  In the below attached VI. IAM using a ListBox that has certain values and display this box values in a table. I can change the values in the list box and the change can be displayed in the table. But my goal is to change the values during the execution itself. It is without a showdown the VI we can change the values in the list box and that change must be reflected in the Array.Can change us using the property node? Please share some suggestions.

  Thank you.

  right click on your list box and check mark it "cells editable." Runtime... Click the cell you want to change, and then wait a second and click again on...

• Change the value of a Boolean switch rocker during execution

  Hello world

  Is it possible to change the value of a switch to toggle Boolean during execution?

  I make a program where the user can switch a relay switch.  However, I want the program to replace the user input if a measured value exceeds a predefined threshold.

  The program below did almost what I want.  The major problem is that it if the measured value returns below the threshold, the relay will be awarded if the switch is set to 'true '.

  

  I would be very grateful for any suggestions to solve this problem!

  Regards, Martin

  Hi Martin & Asad,

  Well, the problem is even more easy to solve

  After cleaning example of Asad, remove this RubeGoldberg, put in some wait States and make a correct stop button I put in place the example...

• Problem with pl/sql procedure, trying to get the value of the user during execution

  Hello

  Using oracle 11.2.0.3

  Can run sql that gets the value of the user during the fine workmanship and also via an anonymous block.

  uses of SQL & Enter_Product_Number

  anonymous block using: Enter_Product_number.

  However, get problems when trying to create a pl/sql procedure, use one of the above

  relevant below tried code part & and: buit works do not error, try bad bind variable if used: and ora-600 if try use &.

  How can we have a procedure from pl/sql that can call and receives a value of user during execution?

  Only way around what I can think of is to pass parameters to the procedure

  Thank you

  create or replace procedure ins_into_issues is

  v_nd_rec_cnt number (10);

  v_normal_rec_cnt number (10);

  Start

  Select count (*)

  in v_nd_rec_cnt

  refmast.issues I have

  where i.iss_product_num = & old_nd_product_number;

  Select count (*)

  in v_normal_rec_cnt

  refmast.issues I have

  where i.iss_product_num = & normal_product_number;

  -code below commented above works.

  end;

  Hello

  what something like this:

  create or replace procedure INS_INTO_ISSUES ( in_normal number, in_old number )  is
    v_nd_rec_cnt     number(10);
    v_normal_rec_cnt number(10);
  begin
      select count(*)
        into v_nd_rec_cnt
       from refmast.issues i
       where i.iss_product_num = in_old;
    --
      select count(*)
        into v_normal_rec_cnt
        from refmast.issues i
       where i.iss_product_num = in_normal;
  end;
  

  concerning

  Kay

• ORA - 06502:numeric or of value errORA-04088: error during execution of trigger

  I received the following error message by entering a number in the maximum value (i.e. 9 999 999.) allowed in a data entry form that is distinct from the basic form:
  
  ORA-06502: PL/SQL: digital or error number precision value: ORA-06512 too big: "< owner >. < trigger >", line 194 ORA-04088: error during execution of trigger '< owner >. < trigger >.
  
  Where < owner > is the schema name and < Trigger > is the name of the trigger. The block of data in the application for participation is based on a database table, and the sum of all the values entered (with a maximum value of 99.999.999.) appears in the form of Basic. A grand total of this amount along w / other totals on the basic shape is also displayed with a maximum value defined as 999 999 999. Only, I get the above error message when the total is greater than 99999999. If the total is less than or equal to 99.999.999, the basic form works very well. Why?
  
  I checked all the attributes of the database columns and form fields and everything seems to be okay, and I'm out of my mind. I desperately need your help to solve this problem quickly because the pressure is on...
  
  Thanks in advance for any help.

  Orchid says:
  Hello Hamid,

  Thanks for your help. Yes, it works as suggested, after that I have increased the length of NUMBER data base table column (9) to NUMBER (11).

  gives you the correct answer, and you don't mark it ;)

  >

  Apparently, Oracle database truncates the decimal points and only update the value of 9 digits without giving errors, but the form of Oracle application is more picky and it generates forms and Oracle error messages when you run the application. It seems that there is a difference when executing the sql commands in the Oracle database and execution of these Oracle Forms application controls. Do you agree?

  Yes

  Thanks again for all the help.

  You can only give reward for it by checking the useful and correct answer.

• masking steps during execution

  I have a sous-suite that I point the user to when asked to isolate a card failure.  To give them some flexibility, I got a popup that gives them a certain number of options (see attachment).  I have an m.o. that indicates the individual steps these select/run (i.e. '1' or '3' in the png).  Control flow (denoted by '2') is the noise they don't really need to worry and may / will cause confusion (and possibly problems for me if they select them accidentally).  Is there a way to hide these measures flow during execution control so that the user sees '1' and '2' (and other similar 'valid' selections?

  If there wasn't a need explicit to have the flow control logic, then I'd be tempted to compact all in the post of the Popup Message action.

  

  By setting the Popup Message Action to go to the step, , use Custom Condition (TRUE):

  

  And by using the following Expression:

  Step.Result.ButtonHit == 1? RunState.Sequence.Main ["MR_RPack_R55"]. UniqueStepId:
  
  Step.Result.ButtonHit == 2? "" "RunState.Sequence.Main ["End_PCI_Isolation"]." UniqueStepId:
  
  Step.Result.ButtonHit is 3? RunState.Sequence.Main ["MR_R103"]. UniqueStepId:
  
  Step.Result.ButtonHit is 4? "" "RunState.Sequence.Main ["PCI_Intf_PT"]." UniqueStepId: «»

  It should be appropriate level following the Popup Message.

  (SequenceFile attached).

  I hope this helps.

  Charlie

• Disable the extended FIFO FPGA target during execution

  Hello

  I use a FIFO extended target in my FPGA to constantly calculate the derivative of a measured value (dB/dt). Thus the FIFO stores all values during time dt. This means dt determines the number of items in the FIFO and dB is determined by the actual value less the oldest value in the FIFO. It works well when I initialize with the code in figure InitFIFO.

  But the FIFO of compensation is not possible (see figure clearFIFO). In the while loop if "reset dB" is false, as the new value of B is written on the FIFO, then the oldest value is read from, for the number of items in the FIFO remain constant. To change dt during execution, I need to clear the FIFO and initialize it with a new length (number of items). I tried the next loop, but it does not work. The FIFO does not initilized with the elements. The length is zero and the loop counter for (#deltaB Length2) is 0.

  What I am doing wrong? Is there a better way to erase a FIFO during execution in the FPGA? I'm now stuck for 2 days with this problem and looking forward to any idea or suggestion.

  Thank you very much. Best regards

  Andy

  Hej,

  Thank you for your response. You were correct, that deltab FIFO length was 0 because the defalt value was zero. The problem is that in my host vi on the RT system I put DeltaB FIFO length in a loop of high priority and as you can see when I restart the FPGA, DeltaB FIFO length has a valid value (the code in figure 1 works well with a local variable of DeltaB FIFO length in the FPGA). But the variable to set the variable "reset dB" is under the control of the loop of low priority of the host vi. And there, I had an entry DeltaB FIFO length unwired.

  So, I learned that a control FPGA read/write unwired sends a '0' or resets the variable to its default value in the FPGA. I assumed that nothing is transferred and the last variable is retained if you let a control read/write unwired. Now, I learned of this stupid error!

  Thanks a lot again!

  Andy

• modify VI during execution

  Dear users of LabView,

  I have a fairly general question about the development of a project, which requires a continuous control of the material. To be more precise, I develop LabView control and DAQ software for calorimeters in high volume in the last 2 years. Such a system requires several PID controls, and it has many subsystems. Because of the large heat capacity, it takes about 3-4 days to launch the system. So if I need to edit for example something in control of the final of a specific subsystem, I stop the LabView code, I have change the specific part, I restart the system, I wait for 3 days, and then I can see the result of my changes.

  My question is the sort of General: what is the good, let's say "best practice" to avoid such a dead time?

  Is it possible to change a VI during execution?

  I understand that if I run the independent screw, that dealing with subsystems, I could avoid this problem. But if I already have a compact 'main' VI, including all the subVIs, what can I do?

  It would be nice to have a sort of "hot swapping" feature in LabView, so during the execution of main VI of my project, I could change the Subvi that I want, and when it is ready to activate, the runtime would swap with the old version.

  Thanks for the tips and advice!

  Best wishes

  Hello

  It all depends on how works your vi...

  The only way I see is to use dynamic calls: a vi called dynamically is editable even if appellant vi is running.

  If you change the callee until the caller calls the vi vi.

  Is how the appellant under vi (this includes the values of connectors and run the VI):

  

  Best regards

• How can I draw several plots by using the XY graph during execution?

  Hello

  I want to draw several plots in the graph XY to the means of execution user will select the number of plots that he wants to draw, depending on this value, I have to get these values and use table generation and then I give to graph XY.

  During execution, but how to do this?

  Please help me in this regard.

  Kind regards

  Herald

  Why start a new thread?

• For a control that can be initilaized during execution

  In the case of an enumeration or a constatnt ring. The options to select should be listed when programming

  The option to select is possible during execution.

  I have a table, and I can send the 1st column of values in the menu drop-down, select one during execution.

  Help, please.

  Hi, Mike Grugh,.

  I don't know how to do it with a table drop-down list boxes, but if the number of lines in your file, then you can try the attached example.

  Kind regards

  Amine31

  (Give the congratulations to the right answers and Mark as a solution if your problem is resolved)

• How to change the frequency of sampling DAQmx during execution?

  Hello guys. I'm using LabVIEW in the measures of the frequency response function. My application requires the sampling rate to change according to the frequency of the signal during execution.

  I tried to do it with a "structure of the event" and it works well when I change the rate manually via the front control but it backs do not work when I set up the sampling frequency to vary automatically (just a frequency sweep). Photos below:

  Why not the structure of the event feels the change in the value of "rate"?

  Thanks in advance for your help.

  Lucas

  Hello

  In "automatic mode" to change the sampling rate, the calculated rate is written in the local variable (as illustrated in the code).  Structure of the event does not change value in the local variable as an event.

  In order to make the structure of the event to recognize the change in value of an indicator such as event: write the new value to the property "Value (Sgnl)" corrosponding node to rate indicator (see figure below).  This will make the structure of the event accept the value change in the indicator as event.

  Note: Use architectures such as producers and consumers for such applications, which makes the application readable and expandable.

  See rear queries if any.

  

• What would cause a constant changes during execution typedef enum

  Hello

  In my program I had a problem with a constant of enum for a selection of the tab value change during execution.  The enum is as part of the initialization of the program and when I step through the loop and then you see the property node of the climax to the value tab and in the next step of the enum changes its value.  I'm under LV 8.0

  Any information will be greatly appreciated.

  Gary

  
  

• change the frequency of the signal during execution

  Hi, I'm working on a VI to calculate excess of signal I think VI seems to be good (not sure) but now my problem is

  change the frequency during execution, which I am not able to do only when I stop and run the vi frequency changes... pls

  someone help me I tried to put in an event... but no use... maybe iam missing something pls help me...

  I noticed that you have some time a loop around the entire block diagram - I'm not entirely sure why that is.  The way you have your VI wrote that the two inner loops will never come out unless there is an error-'stop' buttons are hidden.  Thus, the outer loop is not do anything for you.

  Once you take it, it is easy to see why you cannot change frequency.  It is defined once, outside of the loops and so never gets checked again.  The best way to resolve this, in your case, is to use registers with shift on the upper loop and check if the value of the frequency has changed since the last iteration.  If so, generate a new waveform and feed DAQmx writing instead.

  See the version annexed to your main VI for what I mean.  (I also replaced the controls to stop with one that is visible and which will stop the two loops without your duty to hit the button abandon.) I'm also an error on the DAQmx read in the loop at the bottom, but I'm sure it will work fine on your equipment.

  See you soon,.

  Michael