Massive VPN password change required

Similar Questions

• I got the message "the u of typed password does not meet password policy requirements, check the minimum password, the password complexity and password history requirements" when changing password

  Original title: password problem

  When I try to write a new password on my windows ultimate 7, I received this message.

  "the u of typed password does not meet password policy requirements, check the minimum password length, password complexity and password history requirements"

  What can I do? I can't change my password :(

  Hi MedoXW,

  This means that you must create a password that meets all of the requirements

  1. make sure that the password is at least 6 to 8 characters.

  2. make sure that the password includes at least 1 capital letter, 1 number and a symbol as "!" or "$".

  3. make sure that the password is not one that you have used in the past.

  Follow all these rules and it should work.

  I hope this helps.

• How to change VPN password on a 1760

  I just started supporting a customer with a Cisco 1760 on site.  They also use VPN on this device.  I can access the web interface, but for the life of me I can't find out where I change the VPN password.  They have terminated just an employee and I need to do.  Can someone point me in the right direction?  I can't believe how difficult it is proving to be.  I must be missing something obvious.

  Thank you

  Jim

  Good to hear about his work and thank you for the update.

  Pls kindly marks the message as answered while others may learn from it. Thank you.

• change password, the customer vi, minimum password complexity requirements.

  I installed esxi 4.0.

  I do not change the password, because he complained minimum password complexity.

  So if you want to change the password, go to:

  Users and groups - & gt; Select the root user, select change.

  and change the password.

  An error is generated when you change the password:

  "A general error has occurred: passwd: authentication token passwd error handling.

  This means that I am not meet the password complexity requirements.

  What are the complexity requirements of password on esxi for the root user?

  Hello

  Don't forget to include a special character, one uppercase letter and number your password and you will hit all the basic requirements. Also, the password must probably have 7 or more characters.

  Best regards, Edward L. Haletky VMware communities user moderator, VMware vExpert 2009
  "Now available on Rough Cuts: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security' VMware vSphere (TM) and Virtual Infrastructure Security: ESX security and virtual environment ' [url]
  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]
  [url =http://www.astroarch.com/wiki/index.php/Blog_Roll] SearchVMware Pro [url] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links Top security virtualization [url] links | URL = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcast Virtualization Security Table round Podcast [url]

• Everyone knows a message popping up requiring a password change?

  seemed a bit fishy, so I ended up reseting my phone. I never got a message like this and change my password often. I hope that's not a bug.

  Used to be 4-digit codes. Demand could change to a 6-digit?

  Normally, iOS request password changes, a few requests to enter.

• MSAD password change will reflect in obiee 11g?

  Hi gurus,

  I'm integrating MSAD to be the primary authenticator in obiee 11g. I was wondering if I change my password in the AD, I'll be able to connect with the changed password or would I need to refresh something on the end OBIEE to pick up this new password? I have to enable SSO for whom? I couldn't find relevant documents.

  Thank you

  Dan

  Yes. No change required to the side bi.

  I referred to the AD integration, make sure that that does not change frequently

• That the restoration of a backup time machine, a previous password change?

  That the restoration of a backup time machine, a previous password change?

  It could, if the last backup was performed before the change of password, and she understood this password file.

  But if you are missing a password, see this article on the search for your password with the keychain:

  Cess.html http://www.Macworld.com/article/2013756/How-to-Manage-passwords-with-keychain-AC

  The fact that Time Machine does not have backed up prior to the change, or discarded a way to backup older you may have missed an opportunity to save, if you have changed it.

• How to save a password changed in Firefox? I rescued him, but then I changed the password and it doesn't give me an option to save the new password. Help, please. Thank you!

  How to save a password changed in Firefox? I rescued him, but then I changed the password and it doesn't give me an option to save the new password. Help, please. Thank you!

  The Web site may use autocomplete = off to prevent Firefox to record the name and the password.

  You can remove autocomplete = off with a bookmarklet to register the name and the password of Firefox.

  • http://KB.mozillazine.org/User_name_and_password_not_remembered
  • Saved password Editor: https://addons.mozilla.org/firefox/addon/saved-password-editor/

• The code of failure of the authentication protocol Kerberos was "the user account has been automatically locked because too many attempts to invalid login or password change attempts have been requested.

  Hello

  I use Windows 7 (32-bit) with SP1.

  Quite often (at least three times a day) I am to be locked of my PC and cannot connect to 30 mts each time. I've analyzed carefully and there is absolutely nothing wrong with my ID on the front of Windows AD or group etc. policy.

  I am getting event ID 40690 in my observer of events and here are the details...

  WARNING on 09/06/2011 09:07:54 lsasrv 40960 any

  Log name: System

  Source: lsasrv with

  Date: 09/06/2011 09:07:54

  Event ID: 40960

  Task category: no

  Level: WARNING

  Keywords:

  User: SYSTEM

  Computer: workstation.companyname.com

  Description:

  The security system detected an authentication for the HTTP/http-proxy server error - nom_societe.com. The code of failure of the authentication protocol Kerberos was "the user account has been automatically locked because too many attempts to invalid login or password change attempts have been requested.

  (0xc0000234).

  I searched all possible sites and cannot find an appropriate solution.

  As it is causing a lot of inconvenience would appreciate a miracle solution as soon as POSSIBLE.

  See you soon,.

  bcshekar

  Hi bcshekar,

  The question you have posted is related to the area and would be better suited to the net Tech community. Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/w7itprosecurity/threads

• PuTTY and password change issue ACS server

  When a new user is created with the checkbox 'Must change the password at the next logon' checked, ACS does not allow the user to change the password.  The password prompt displays a message access denied. Could someone point me in the right direction to solve this problem?

  I created a new account on cisco ACS server and check the box "user must change password at the next logon". I then used ssh to test the newly created using PuTTY user account. When I ssh to the cisco devices [switch or router] password prompt appears and ask me to type the new password. Once I did this I get a message access denied.

  It worked well with secure CRT. But users do not have secure CRT, they are supposed to use PuTTY. Users can connect in devices using PuTTY. The problem is that when we try to change the password.

  ACS Version: ACS 4.0

  Thank you

  Nachi

  When a user connects in SSH to the system and uses an expired password GANYMEDE, he is prompted to change their password. However, this password change does not work correctly.

  To resolve this problem, you must have the SSH v2 with "Keyboard interactive" authentication for SSH v2 game. Cisco bug ID CSCin91851 addresses this problem.

  Symptom:

  When you use the router as a ssh server is authenticating with a normal SDI/RADIUS, work of authentication backend. However, neither the new BUGS mode or mode next token dialogues completes successfully.

  Conditions:

  Problem only occurs in mode again PIN or next token dialogue mode.
  Specific SSHv2

  Workaround solution:

  Use telnet for authentication or to define vty lines to authenticate against RADIUS
  (non - SDI) server instead.

  Other Description of the problem:

  Not all ssh clients are supported the dialogue for the new PIN mode or next token to work.

• ACS 'Password change rule' does not work with telnet

  Hello:

  I am configuring users will have to change their password when they enter a network device, the first time they connect.

  I have a camera ACS 4.0, the option "disable TELNET change password against this ACS and send the following message to the telnet users session" is disable. When I try to enter in a Catalyst 6500, for example, I type user and pass and I get rejected (RADIUS is the protocol used).

  In the reports of the CSA, I can see, it seems the following error "Impossible authentic - CS expired password.

  I activated the option 'Apply the password change rule' in group settings, other options for the 'password aging rules' are disabled.

  Thanks for your help,

  Francisco

  You can use GANYMEDE + to get the change of password to work.

  Does not work with the RADIUS.

• People App "your password changed. Sign in with your new password'.

  I cannot synchronize the application 'People' in Windows 8. Whenever I start the application it synchronize for a second and then tell me "your password changed. Sign in with your new password'. I have not changed my password at all and it won't connect or sync with anything. Any ideas or anyone who deals with this problem? I tried to change the settings, uninstall and more but no luck.

  I had the same questions as everyone else ("your password was changed... ("error, only Microsoft app listed, adding Facebook didn't work, etc..).  I also used an e-mail provider.

  I tried to switch to a local account, restart and return to a Microsoft account.  It worked!  Microsoft and Skype both appeared in the people app immediately (Skype was not there before, but I had already installed the app) and I was able to add Facebook without problem.

  After the switch to a Microsoft account, I got a text asking to confirm my PC with a code.  I followed the instructions and did.  I have no idea if it was part of the original or not problem.

• IOM - Forced OAM of password change signout redirection URL

  Hello

  We have integrated the OAM and IOM 11.1.2.2 using a DCC 11g webgate.

  SignOut IOM correctly goes to the page of disconnection, OAM.  Aclose with the help of IOM forgotten password OI featureM redirects to the OAM login page.

  My problem occurs when a user is forced to change their password at the first login.  Screens of the IOM appears as expected, but after completing the page and clicking on 'Submit', the display shows an error ' ADFC-02017: the value of the url cannot be null or empty.  Logs show SSOAutoLoginHelper: redirect Signout URL: null.

  Change of password is successful, is just the redirect which fails.

  Can someone tell me where the redirect Signout URL must be set?

  Thank you

  Darren

  Thanks for your reply, but it's an integrated OAM and IOM put in place there is no link of password change created by me.

  In my case, that error was because OID obpasswordchangeflag is set to true but that IOM usr_change_pwd_at_next_logon has not been set to 1.

  This because the IOM has been upgraded from a version 10g, who has worked with an OAM 10 g version where all the functionality of password entrusted by OAM 10 g, if no user was never their flag usr_change_pwd_at_next_logon is set.

• password change date

  Hello

  What data dictionary, I know that when my sys or other user password has been changed.

  Concerning

  Rabi

  dbksunil escribio:

  Hello

  Oracle follows the expire of the password based on when it was most recently modified. So, looking at the DBA_USERS. EXPIRY_DATE and subtracting PASSWORD_LIFE_TIME you can determine what password was last changed. The last password change time are also directly from the PTIME column visible in dictionary USER table $ (view DBA_USERS based).

  If you have PASSWORD_REUSE_TIME and PASSWORD_REUSE_MAX contained a profile assigned to a user account you can reference dictionary table USER_HISTORY$ for when the password has been changed for this account. This will keep any password which always falls within the limits PASSWORD_REUSE_TIME and PASSWORD_REUSE_MAX.

  Must run this query after the Sys user login

  SELECT user$ .NAME, use$. The user PASSWORD$ .ptime, user_history$ .password_date

  OF SYS.user_history$, SYS.user$

  WHERE user_history .user$ # .user user = $ #.

  =========================================

  OR try this query:

  SELECT name,

  CTime,

  PtIMe

  FROM sys.user$

  WHERE name = 'username ';

  Note: Replace-USER NAME with the user name you need to know the information.

  CTIME tells - moment of creation

  PTIME indicates - change time password

  Thank you.

  Lol, you forgot to copy the last sentence: "under the direction of: varun4dba February 3, 2011 19:28.

  Of

  Password last changed date

  At least paste the link from which copy you it... does not the words of others

• WebLogic admin user password change without disrupting existing users

  Hi people,
  
  As a business strategy, we need to change the password for the admin user in weblogic after a specific period of time.
  Please let us now how can we who without losing other existing users in "My Kingdom."
  
  I understand that we can use the weblogic.utils.security.AdminAcoount utility to give the new password, which will create a new file DefaultAuthenticatorInit.ldift in + < area-home > / security + record (according to Doc ID 1082299.1).
  The password will change, but the users in "My Kingdom" will be lost. (there are a lot of users and it is an environment of production also hobbies out of question)
  
  Is it possible that we can maintain users and still make the password change?
  
  See you soon,.
  Carole

  Once you DefaultAuthenticatorInit.ldift create a new file, any existing information will be lost.

  There is not another way, we can get the previous users.

  If you have the previous ldap/data directory, then we can have a chance.

  Otherwise, we don't have an option to recreate the user.

  We have an option to import/export security relams users, but this is before recreating the DefaultAuthenticatorInit.ldift

  Hope that answers your question.