Problems with iframes cached after the upgrade to Safari 9.1

Similar Questions

• Problems with VPN tunnels after the upgrade to PIX 7.0

  It seems that Cisco has revamped the VPN process on the new Version of PIX 7.0.

  After I've upgraded, I noticed that AH (i.e. ah-sha-hmac, ah-md5-hmac) was no longer supported and all my container transformation games OH no were not converted.

  Another question, if you have enabled on Versieon 6.3, names when you upgrade, tunnel groups will be created (formerly "identity isakmp crypto, crypto key isakmp peer ') which will include a hostname (hostname of identity) instead of IP as it was to the point 6.3. Guess what... Nothing works! Having to delete and recreate it using the IP address.

  See an example...

  tunnel-group OTHER_END type ipsec-l2l

  IPSec-attributes tunnel-group OTHER_END

  pre-shared-key *.

  The above does not work... Having to recreate using the IP address mapped to OTHER_END...

  tunnel-group 2.2.2.2 type ipsec-l2l

  2.2.2.2 tunnel-group ipsec-attributes

  pre-shared-key *.

  Furthermore, I have problems with my racoon and freeswan extranet... Did someone recently updated with success and other gateways VPN provider (i.e. checkpoint, Freeswan and Racoon) work?

  We found the solution for this problem. It appeared that the perfect forward secrecy is enabled at the other side. If a 'card crypto outside_map 10 set pfs' is necessary. With the pix 6.3 version that appears not to make the difference, the vpn works even with pfs disabled on the side of pix.

• I have major problems with Photoshop CS6 after the upgrade of Windows 8 to 10 of Windows.

  Just upgraded to Windows 10. I had 0 issues before upgrading my system. When I first opened the program I couldn't use any tool correctly because the jury of art was covered in black and flashing/alternating between black and transparent background. I have close to reopen and try again. Now I can't even open Photoshop at all. I get an error indicating that the program has stopped working. From now on, it seems that it is only of Photoshop with the question and not my other CS programs. How can I fix? He couldn't start comes at the worst time in the middle of a project.

  Hi dropj

  Thanks for the update.

  Here are a few steps you can try

  • Check your system must meet all requirements for Photoshop (especially graphics cards) system requirements | Photoshop
  • In Photoshop, check open Cl must be enabled in preferences > performance > advanced settings. Also check how is the VRAM

   

  • Create a new user account on your computer How to Set Up and configure on Windows 10 user accounts

  Then try to work in Photoshop in there

  • Temporarily disable the use of your card from the Device Manager and try to use Photoshop.

  Concerning

  Assani

• Problem with card reader after the upgrade to Windows 7

  Just upgraded to Windows 7 Pro to Vista business and cant get internal or external card reader connection. Not even connect the camera via the USB port works.

  It's a laptop?  If so, look at the website of the manufacturer of the laptop.  You should find the drivers here.

• Problem with URL ReadyCloud after the installation of the FW 6.5 on RN312

  Hello

  After the update to the official FW 6.5, the URL of the ReadyCloud is always on "'https://readycloud-test3.netgear.com/client/en/welcome.html ' not on the production URL"

  What is the correct production URL?

  Thank you

  OK, it's a problem browser temporary files after the update, sorry!

  I have clean the temporary files IE11, now all URLS are corrected with links PROD. I have this url: https://readycloud.netgear.com/client/en/welcome.html

• I have a problem with my keyboard after the update using drivercanner

  Original title: my keyboard stopped working after the last updae

  OTEVA here

  Hi I have a problem with my keyboard after update using drivercanner I need help fixing this cause I tried looking for the installation of the upate that cause, but I don't have where to look.

  try a system restore to a date preceding the update.

• Problem with Windows Update after the removal of Virus

  My operating system is Win Vista 32 bit, had some virus closed my windows updates, have a view of the white page. Checked that my services and win update is in automatic mode has started, so I don't know why my updater gives me a red x saying windows updater is turned off.  Any suggestions?

  [Original title: Windows Update]

  https://answers.Microsoft.com/en-us/protect/Forum/protect_other-protect_scanning/problem-with-Windows-Update-after-removing-virus/3a8dd279-2732-4693-88bf-f5cea4afca96>

  It makes more sense. How to reset the Windows Update components?

  Yet, as indicated in The ball , the search results links do not work. I also used several browsers and DuckDuckGo. Maybe it's because the Windows Update Agent was changed some time ago and the article is no longer valid.

  EDIT: If the OP is also struggling to access the link I suggest using repair Windows updates available from tweaking.com. I suggest also using the Registry backup of the same author before hand.

  Repair the Windows updates

  http://www.tweaking.com/content/page/repair_windows_updates.html

  Registry backup
  http://www.tweaking.com/content/page/registry_backup.html

  I hope this helps.

• Problem with Windows Update after the new installation of Windows 7 Pro the Lenovo ThinkPad X 200

  I'm trying to do a fresh install of Windows 7 Pro on a Lenovo ThinkPad X 200. The product key is easy to find on the sticker of the ThinkPad. However, the version of Windows is hidden (for example, I can't check that my ThinkPad had originally installed Windows 7 Pro). I was able to install by using a Pro Win 7 SP1 CD ROM I bought for another installation. I used the ThinkPad I was trying to make the new facility on the product key. I was able to activate the Windows 7 Pro using the phone call and my cell phone. I checked the activation! However, I have problems with Windows update. The product key may be a different version of Windows 7. If so, why did it install and activate OK? Y at - it a fix for this problem or I have to buy a new version of Windows 7 Pro? Please note that I have not yet installed all drivers Lenovo ThinkPad as I can't seem to install correctly. Thank you!

  Since the issue is updated to Windows, it is not a product number key.

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

• is more able to stream video from some sites after the upgrade to Safari 10

  

  After the upgrade to 10 Safari, I can no longer stream from a certain website. Instead of playing the video stream, I'm prompted to save "player.swf" as shown above.  This problem occurs on el Capitan, and it happens on the Sierra, and it all started when I updated Safari 9.x to 10.0

  Open Safari preferences / Security tab and check the box allow Plug-ins.

  Very soon of Flash player and the plugin will be obsolete and this web page needs to change its code to HTML5.

• problem with magic network after the recent windows and mcafee updates

  There seems to be a conflict with of cicso latest windows and mcafee updates Network Magic platform. Hard to say which is originally the closing down due to the fact they both tend to update together or to the one right after the other. Could someone look into this?

  Hello

  Thanks for posting this question in the Microsoft Community.

  I'll certainly try and help you get the problem solved.

  I suggest you to check that the windows update history to verify that Windows update may cause the problem.

  (a) click on the "Start" button and select "Control Panel" from the menu that appears.

  (b) double click on "Add or Remove Programs".

  (c) click the checkbox next to 'Show the update' at the top of the window.

  (d) locate the "Windows XP - software updates" header. Below, you will find a list of updates all the date where they have been installed and the installation of the window.

  Provide us update KB number that may cause the closing.

  You can also use the shutdown Event Tracker to stop suddenly.

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• Problems with Vista start after the update of Norton.

  I had problems with start-up since Norton updated and re-printing my subscription a few days ago.  Initially, the splash screen would freeze, I'll try to re-start, only to be refrozen.  After several attempts, with different amounts of time in between, I tried to start a 'normal', but are also intended to "launch fix."  Microsoft solution is to go back to "settings" before the new and improved Norton Security has been installed.  "Norton isn't too happy with this solution, warning: your firewall is disabled, you are vulnerable to all viruses known to humanity" and Norton resets security and the volley continues.  At some point, the screen may freeze, and I have to start all over again.  Had my Vista Home premium SP1 and SP2 installed this past year, patches and I have had no problems since, so far.  If anything is not easy? The pearls of wisdom would be greatly appreciated.  The garbage man comes tomorrow, I'm tempted to put my computer out of the trash.  Help. Please, I beg you.

  Hello, Heather,

  Boot safe mode with networking.  Download the following tool and run a full scan to exclude the malware.  If the system is infected, Norton will be compromised and would not be able to detect malware.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=16

  Reboot - still problems with startup?  Uninstall Norton - use the uninstaller to remove all traces.  Restart your system and reinstall the software.

  Norton Removal Tool

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?docid=20080710133834EN&LG=English&CT=United+States&product=home&version=1&PVID=f-home&entsrc=redirect_pubweb

  Once you have completed and reinstalled Norton, test - you still having the problem?  Try the link to clean boot troubleshooting below.

  The best advice I can give you is not no use Norton products.  Use Microsoft Security Essentials, which is freeware.

  Perform a clean boot

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

• R7000, problems with wireless connection after the last firmware update 1.0.6

  I recently updated to the latest firmware available for the R7000...

  The upgrade went well and my Wired PC all connected without any problem, but several of my wireless devices were unable to connect to the WiFi. I have my cell phone Wifi (Android phone) kept gives me an error of authentication, but was able to connect to the network comments... weird...

  I started firmware 1.0.4 and everything worked well again... it seems that the new firmware is buggy.

  The Firmware versions listed above are only for the first three issues, to save typing, but you get the version that I use...

  Nick

  Hello

  I would like to let you know, I've improved in 1.0.6 last night and everything worked. The difference is this time I had to reset my router to the factory settings using the reset hidden at the back button and hold the button for about 7-10 seconds. This resets the router to the factory settings. I then had to re-enter all my IP address reservations and the word block list, but all my wireless devices were able to connect. The last time I did the upgrade, I just restarted the router, and I had read that I had to do a factory reset to operate correctly.

  It would have been nice for Netgear arrive at a way to extract Information form my version last-place back... it would have saved me a lot of time...

  Good luck

• problem with vcenter start after the installation of the heart rate

  Hello. I installed vmware vcenter 5.5 then install vcenter server heartbeat 6.6 and after restart sytem and rename the main node for the system to restart after sytem is som vcenter service startup cannot run example Vmware Virtualcenter server Service cannot start so I can't connet with vsphere vCenter client and cannot start manually that do now what do I do?

  I installed only primarynode and just get the head node clone

  they are both my virtual nodes

  Please help me

  Buffer Cache Hit Ratio is the percentage of sql server pages requested and retrieved from the buffer cache without reading disc.

  It is not necessarily a problem. A way to increase the buffer Cache Hit Ratio might be to increase the memory on the virtual computer. If you feel that the performance is not a problem, you can modify the rule so that it is less than 90% so that the rule is triggered, but Microsoft recommends 90 + %.

• help-problems with Mac book since the upgrade to Yosemite

  I have a 13 "Macbook, end of 2010. It is used to run perfectly until I installed Yosemite in late 2014 when he started to run slowly and Safari would crash. The problems have got worse with each update. Now when I boot, I get a white screen with a progress downstairs bar and it may take between 1-3 minutes before I get the logon screen. Programs also take a long time to load and I constantly get the rotation beach ball.  I don't have any external hardware attached and am does not have any software that needs to use a lot of RAM. I ran an EtreCheck - results below. Can someone help me understand?

  EtreCheck version: 2.9.11 (264)

  Report generated 2016-04-14 19:23:39

  Download EtreCheck from https://etrecheck.com

  Time 06:25

  Performance: Below average

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Another problem

  Description:

  System is slow to start up and constantly get the spinning beachball.

  Hardware Information: ⓘ

  MacBook (13-inch, mid 2010)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook - model: MacBook7, 1

  1 2.4 GHz Intel Core 2 Duo CPU: 2 strands

  2 GB RAM - Insufficient RAM! Extensible - [Instructions]

  BANK 0/DIMM0

  ok 1 GB DDR3 1067 MHz

  BANK 1/DIMM0

  ok 1 GB DDR3 1067 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 770

  Video information: ⓘ

  NVIDIA GeForce 320M - VRAM: 256 MB

  Color LCD 1280 x 800

  Software: ⓘ

  OS X Yosemite 10.10.5 (14F1713) - since the start-up time: 13 hours

  Disc information: ⓘ

  TOSHIBA MK3255GSXF disk0: (320,07 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  Macintosh HD (disk 1) /: 318,88 (Go 256,24 free)

  Storage of carrots: disk0s2 319.21 GB Online

  OPTIARC DVD RW AD - 5970H)

  USB information: ⓘ

  Built-in ISight from Apple Inc..

  Apple Inc. BRCM2070 hub.

  Apple Inc. Bluetooth USB host controller.

  Apple Inc. Apple keyboard / Trackpad

  Guardian: ⓘ

  Mac App Store and identified developers

  Launch system officers: ⓘ

  [loaded] 5 tasks of Apple

  [loading] 147 tasks Apple

  [operation] 49 tasks Apple

  [killed] 11 tasks Apple

  11 killed process lack of RAM

  Launch system demons: ⓘ

  [loaded] 47 tasks Apple

  [loading] 135 tasks Apple

  [operation] 74 tasks Apple

  [killed] 6 tasks Apple

  6 killed process lack of RAM

  Launch officers: ⓘ

  [loading] com.hp.help.tocgenerator.plist (2009-07-28) [Support]

  [operation] com.trusteer.rapport.rapportd.plist (2016-03-19) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.fpsaud.plist (2016-04-05) [Support]

  [loading] com.microsoft.office.licensingV2.helper.plist (2016-01-09) [Support]

  [operation] com.trusteer.rooks.rooksd.plist (2016-03-19) [Support]

  User launch officers: ⓘ

  [failure] com.amazon.cloud - player.plist (2014-06-07) [Support]

  [operation] com.amazon.music.plist (2015-12-29) [Support]

  [out] [email protected]

  Other applications: ⓘ

  [ongoing] com.etresoft.EtreCheck.127548

  [loading] 364 tasks Apple

  [operation] 143 tasks Apple

  [killed] 16 tasks Apple

  Plug-ins Internet: ⓘ

  FlashPlayer - 10.6: 21.0.0.213 - SDK 10.6 (2016-04-08) [Support]

  QuickTime Plugin: 7.7.3 (2016-03-30)

  NP_2020Player_IKEA: 5.0.94.0 - SDK 10.6 (2011-10-26) [Support]

  Flash Player: 21.0.0.213 - SDK 10.6 (2016-04-08) [Support]

  Default browser: 600 - SDK 10.10 (2015-09-24)

  Silverlight: 5.1.41105.0 - SDK 10.6 (2016-01-23) [Support]

  iPhotoPhotocast: 7.0 - 10.7 SDK (2012-04-05)

  Safari extensions: ⓘ

  AdBlock - BetaFish, Inc. - https://getadblock.com (2015-09-26)

  Add to wishlist Amazon - Amazon.com - https://www.amazon.com/wishlist?ref=cm_wl_saf_ext (2014-06-26)

  PIN button - Pinterest, Inc. - http://www.pinterest.com/ (2014-06-26)

  Add to wishlist Amazon - Amazon.com - https://www.amazon.com/wishlist?ref=cm_wl_saf_ext (2014-06-26)

  PIN button - Pinterest, Inc. - http://www.pinterest.com/ (2015-07-02)

  3rd party preference panes: ⓘ

  Flash Player (2016-04-05) [Support]

  Trusteer Endpoint Protection (2016-03-28) [Support]

  Time Machine: ⓘ

  Time Machine not configured!

  Top of page process CPU: ⓘ

  kernel_task 17%

  8% WindowServer

  3% ScreenSaverEngine

  PS 1%

  0% fontd

  Top of page process of memory: ⓘ

  349 MB kernel_task

  96 MB mdworker (5)

  Safari 94 MB

  Com.apple.WebKit.WebContent (2) 92 MB

  45Mo mail

  Virtual memory information: ⓘ

  99 MB free RAM

  1.90 used GB RAM (213 MB Cache)

  482 MB used Swap

  Diagnostic information: ⓘ

  April 14, 2016, 18:53:37 /Library/Logs/DiagnosticReports/rapportd_2016-04-14-185337_[redacted].cpu_resou rce.diag [details]

  /Library/rapport/*/rapportd.app/Contents/MacOS/rapportd

  April 14, 2016, 06:01:32 self-test - spent

  April 13, 2016, 21:13:29 ~/Library/Logs/DiagnosticReports/Activity Monitor_2016-04-13-211329_ [redacted] .crash

  com.apple.ActivityMonitor - Applications/Utilities/Activity Monitor Monitor.app/Contents/MacOS/Activity

  April 13, 2016, 18:43:44 /Library/Logs/DiagnosticReports/Safari_2016-04-13-184344_[redacted].hang

  /Applications/Safari.app/Contents/MacOS/Safari

  You need more RAM. Note related errors in red. According to my information, you can install:

  Maximum memory	16 GB (actual) 4 GB (Apple)
  Memory locations	2-204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM

  Reliable suppliers include OWC, DataMemand Crucial.

• Why can't I read my PDFs with CD player after the upgrade of Apple OS 10.11?

  Two days ago I could read my PDFs with Acrobat Reader DC while running OS 10.9 on my Mac Mini. Today, I upgraded to OS 10.11 (El Capitan), but now I can't read my PDF files. The player will launch, but never to show the document. No error message. No matter if I try to open the PDF file by clicking or using file > open.

  So far, I have:

  (1) removed and reinstalled Acrobat Reader DC.

  2) updated the player via the menu help. 2015.009.20077 running. By the Adobe website, I am told that it is the most recent version.

  3) based on a forum comment, I disabled both plugins Adobe in my folder of Plugins from the Internet. No effect. The replaced. No effect.

  4) based on a forum comment, I registered on the Adobe Web site... and so that's why I can of this type. Confirm my email address. Connected. No effect.

  5) based on a troubleshooting page, I did so that the operating system will be associated with the single CD with pdf files. Not found a problem there.

  How can I fix this so I can read PDF files that I have read two days ago?

  Hi Robert,.

  Try to install the reader here XI: Adobe - Adobe Acrobat Reader DC Distribution and check if you are able to open a PDF file or not.

  Thank you

  Abhishek