Master table shows only 5 rows

Similar Questions

• How show only last row value in a column of OBIEE

  Hi Experts
  
  How show only last row value in a column of OBIEE
  
  
  Thank you
  V

  Hello
  Pull column criteria, which you want to display only last row. Filter Advanced sql apply now to this column as a.
  RCOMPTE ("customer D1". "C1 Cust Name") = MAX (RCOMPTE ("customer D1". " Cust C1 Cust Name name')) here is the column where I applied the filter.
  So, it gives only last row in the name column of the Cust.

  Awarded points if the answer
  Reference: http://forums.oracle.com/forums/ann.jspa?annID=939

  Kind regards
  Srikanth
  http://bintelligencegroup.WordPress.com/

• Rows from the outer Table shows only not all data.

  Hello
  
  I have a line to 80 characters that I import in an external table.
  
  80% imports fine line data, but some lines are cut.
  
  The bytes in the file are as follows.
  ABCABC2334 0000001000010000001000000001 000000 00001C A002
  
  Bytes in an external table.
  ABCABC2334 0000001000010000001000000001 000000 A002
  
  The bytes in the row of the outer table stop somewhere at the end of 000000 and the 00001C is cut.
  
  What build be the cause of this?
  
  I am able to read the characters at the beginning and towards the end of the record of 80-character line.
  
  The external file below performs the following operations.
  ABCABC2334 0000001000010000001000000001 000000 01B A002
  
  I can even make a definition of the external table (c1 char (1), c2 char (1),... c80 (1) tank and all the characters see fine in the specified columns.)
  
  Here is the last definition of the external table. The "middle" column still shows this behavior. Basically, it is in the file and can be seen with every character in the definined line, but not as a group of characters.
  
  DB CHARACTERSET WEBISO8859P1
  
  CREATE TABLE EXT_PROJ_1
  (
  Field1 tank (6 BYTES),
  Field2 float (4 BYTES),
  medium (67 BYTES)
  field3 tank (3 bytes),
  CR tank (2 bytes)
  )
  EXTERNAL ORGANIZATION
  (TYPE ORACLE_LOADER
  THE DEFAULT DIRECTORY EXP_DIR
  ACCESS SETTINGS
  (
  RECORDS delimited by '\r\n '.
  FIELDS (field1, position(1:6),
  position(7:10) Field2.
  average position(11:77)
  field3 position(78:80).
  CR position(81:82)
  )
  )
  LOCATION (EXP_DIR: 'ext_proj_1.txt')
  )
  REJECT THE LIMIT 1
  noPARALLEL
  NOMONITORING;
  
  Published by: 917320 on March 13, 2012 09:07

  Looking at your table definition:

  field1 char(6 BYTE),
  field2 char(4 BYTE),
  middle char(67 BYTE),
  field3 char(3 byte),
  cr char(2 byte)
  

  column in which you will store a string of 80 bytes?

  BTW: You said "import into an external table." You import FROM an external table or EXPORT to an external table?

• Problem with headphone selection if the table has only one row

  Hi all
  
  I have developed a table in which I use selection listener to perform a task when a line is selected.
  It works fine when I have more than 1 row in the table, but when I did that one line in the table, the listener of selection do not call the corresponding method in the bean.
  I understand this selection event is raised only when the line is changed, but in the case of use when only one line is there, what do I do to make the listener of selection work?
  
  The selection listener I wrote the code to make the line selected as current line and perform the required task.
  
  Please suggest a way out of this situation.
  
  Thanks in advance.

  Hello

  try to remove this table attr

  selectedRowKeys="#{bindings.xxx_VO1.collectionModel.selectedRow}"
  

• export the schema, but for two tables, export only 20 rows

  11.2.0.2/RHEL 5.4
  
  Using expdp, I want to export an entire schema. But for the 2 large tables (say the EMP and DEPT tables) in this diagram, I want to export only 20 records (at random) for them. Is it possible for expdp and impdp?
  
  If this is not possible then, is there any option to have no any line for these 2 tables?

  Christian Christmas Pal Singh says:
  possible, but you must create two files dmp means export of run 2 times.
  1. for complete schema to exclude these 2 tables by the exclusion clause.
  2. use the query clause to filter the data in the second export for these 2 tables.

  Really? is not something that similar work? instead of rownum, if you want truly random, then use example of clause, but it should be based on the amount of sample would make 20 lines for you, then a bit of work there.

  schemas=my_schema
  QUERY=my_schema.table1:"where rownum < 21"
  QUERY=my_schema.table3:"where rownum < 21"
  

  Published by: rjamya on Sep 19, 2012 08:32

• Hi I want to buy creative cloud membership can I buy through the debit card because at the moment, it shows me the only card of credit (Visa, Master Card) option only?

  Hi I want to buy creative cloud membership can I buy through the debit card because at the moment, it shows me the only card of credit (Visa, Master Card) option only?

  Payment by credit card is accepted for membership in creative cloud and PayPal is accepted in some countries supported.

  Please visit the Creative Cloud FAQ and Adobe stores | FAQ order online and your payment.

• What table shows the tablespace in read-only mode or read / write.

  Hi all
  
  Can someonoe help me find which table shows if a tablespace is read-write or read-only mode.
  
  Thank you
  Naveen

  DBA_TABLESPACES - STATUS column.

  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14237/statviews_4157.htm#i1627812

• keyword search - show only the matching field

  Hello
  I need help to write a < Cfoutput > that shows only the field names that match a search.
  
  FYI, for example, I have a form with a field of keyword allows you to do a "search by name" looking for my very basic table that has several types of family names (e.g., director_lastname, actor_lastname, etc..)
  
  < cfquery name = "Results" datasource = "my_dsn" >
  SELECT * FROM table WHERE
  director_lastname LIKE ' %#keyword #% ' GOLD actor_lastname AS ' %#keyword #% ".
  < / cfquery >
  
  Currently I can only understand how cfoutput whole row that matched the querey
  
  As always, any help is greatly appreciated!
  Thank you!

  For syntax, change this
  
  for this
  

  to be more effiecient
  

• Show hide some rows of columns in a report

  Hi all
  
  I needed to develop an application with a report and under certain conditions, that we need to hide or show rows by clicking. Please see this report [here: http://apex.oracle.com/pls/otn/f?p=33897:1]
  
  For example if I give CUSTOMER_ID as hiper link when I click on '1' only 5 rows must be visible. That's I need to switch between hidden and shown the condition.
  
  I tried using Java Script
  
  
  < script type = "text/javascript" >
  <!--
  function toggle_visiblity (id) {}
  var e = document.getElementById (id);
  If (e.style.display is 'none')
  e.style.Display = 'block ';
  on the other
  e.style.display = 'none ';
  }
  ->
  < /script >
  
  
  And then using this script in the query by selecting the table and giving him in & lt; div & gt; tag.
  
  It works with a single column, but some lines that he does not. Can someone please help me out here. Thanks in advance.
  
  Thank you and best regards,
  Vikas Krishna

  No problem Vikas!

• How can I customize my new tab page to show ONLY the websites that I want?

  Whenever I use the new tab it allows me to add some sites, but also displays the sites recently visited, but also the best sites. I want my new tab to show only sites I have add in 4 columns and 2 rows as what I had in my chrome.

  Hi, it won't show recently visited until you have completed all the tiles with your own. When you have added a site that you want to keep here - PIN. See - customize the page new tab.

  More info on the page tab that could be of interest.

  You can change the number of tiles on the Page of the new tab to zoom in or out (Ctrl and + key, or Ctrl and - key).

  You can also keep the same zoom setting when a new tab is clicked: Type Subject: config in the address bar, press ENTER, accept the warning, scroll to browser.newtab.preload and double-click on it to change the 'value' of true to False.

  It is also possible about: config to change the maximum number of tiles, scrolling to the browser.newtabpage.columns (or Rows), then right-click > modify to set a new number of 'value '.

  As an alternative, you might like to try the add-on new tab tools.

  If your question is resolved by this or another answer, please take a minute to let us know. Thank you.

• 2 TB Canvio shows only 30GB after format NTFS

  I bought the new 2 TB Canvio external hard drive.
  After the attempt to reformat exFAT on NTFS system drive shows only 30 GB file size, no matter if it's Windows or Linux.

  How I can solve this problem, made the firmware has been corrupted?

  Jake2701

  Hello

  Reach:
  Control Panel-> system security & -> administrative tools-> computer-> disk management management

  Now you should see the connected USB external HDD, but also the other drive HARD internal (containing the different partitions).

  Choose the USB HARD drive. Usually the system will ask you to initialize the disk. Select the disk and GPT (guid partition table) this is recommended for disks larger than 2 TB.
  After that it will show that the disk space is not allocated. Now, you need to click right on that unallocated spade and select new simple volume to format.
  All that s

• How the identity if one table used only by synonyms and not by any other subprogrammes in a schema?

  Hi people

  How the identity if one table used only by synonyms and not by any other subprogrammes within a schema. I see in the TOAD describe objects tab used by, but I would like to identify hundreds of table so I would like to know if there would be any SQL or Meta Data Tables?

  How the identity if one table used only by synonyms and not by any other subprogrammes within a schema. I see in the TOAD describe objects tab used by, but I would like to identify hundreds of table so I would like to know if there would be any SQL or Meta Data Tables?

  The ALL_DEPENDENCIES view has hierarchical information based on object_id

  The view object has the object_type.

  Create a hierarchical query on the first view and attach it to the second view.

  Or you can use the utldtree.sql file in the installation of the DB admin folder. Comments initially show you how a hierarchical query based on the object type.

• Show only items returns Null while watch value

  Hello

  I have a single display element (P1_ID) on my page in which:

  Source: replacement always, value that exists in session state

  Source type: SQL (return the unique value) query

  Select Max (ID) from User_table

  I have a process that will remove data in another table based on the value of this element. (ID is PK in User_table and FK in my_table)

  DELETE FROM MY_TABLE WHERE ID =: P1_ID;

  Zero or lines will be deleted

  However, : P1_ID is null, while this is to show the value... when I do the point as hidden and protected the deletion will work... but I need to show the value on my page as show only...

  I use APEX 4.2
  

  so could someone please help me?

  Minoo.TK wrote:

  Hello

  I have a single display element (P1_ID) on my page in which:

  Source: replacement always, value that exists in session state

  Source type: SQL (return the unique value) query

  Select Max (ID) from User_table

  I have a process that will remove data in another table based on the value of this element. (ID is PK in the User_table and is FK my_table)

  DELETE FROM MY_TABLE WHERE ID =: P1_ID;

  Zero or lines will be deleted

  However,: P1_ID is null when it indicates the value... when I make the point as hidden and protected the deletion will work... but I need to show the value on my page as show only...

  I use APEX 4.2

  so could someone please help me?

  case 1:-IF you use session state - YES

  and dynamically change its value it give error protection session state in the future.

  Reference:--

  Session state protection violation

  display only the item and save session state

  case 2:- but if your session set State = no. it ends the session state protection error

  but you will not be able to use the value defined in the feature display

  Solution:-in your case if you want to use the value in the element displayed only as you say

  It works with the value of the hidden Yes it will be.

  either use your display for viewing only, and also set the value of element element hidden to remove from the table

  because

  NOTE:-you cannot set save no. session and its value used in parallel (or it can be used to remove or add that I tested and faced this thing too)

  one last thing keep hidden protected point value NO otherwise, it will give error:-manually editing the protected point

  Reference:--

  HI, Patrick:

  We had the same problem that ' "violation of Page protection: this can be caused by a manual editing of a protected page items." " If you don't know what caused this error, contact the administrator of the application for assistance. Contact your administrator for the application. ».

  APEX 4.1.1.00.23 page protection violation

• Show only distinct values in narrative mode

  Hi guys!

  Here again, we are trying to reach an ambitious goal.

  It is possible to show only distinct values in a narrative view? For example, I have a query that retrieves about 100 lines. In these lines, a few different years, it is something like this:

  1-2013, Jhon, 10

  2-2013, Brian, 15

  3-2013, Pete, 20

  ...

  10-2014, Steve. 5

  11-2014, Kevin, 12

  ...

  90-2015, Ray, 24

  91-2015, Michael, 2

  ...

  It is possible a mode display narrative only something like that?

  Years: 2013, 2014, 2015

  If I use the feature number @column, I get as many years the results are retrieved. It is not user friendly.

  Any help will be appreciated.

  Best regards

  Fabian

  Hi all!

  I found my own solution and I want to share with you. Maybe it helps someone in the future.

  I used JavaScript to iterate through each row value. By each line, I'll check if it value is added to the overall picture with unique values. If not added, I add it, otherwise, I do nothing.

  Here is my script (pay attention to each code block, it must be in its proper "narrative class"):

  Narrative section prefix

• 12.1.3 JDeveloper and table for selection of rows in Internet Explorer 9

  Configuration: Windows 7, Internet Explorer 9 12.1.3, JDeveloper (sorry, the company standard for now)

  I have problems of selection of rows in a table when you use IE9 (disabled compatibility view) as my browser.  I created a simple application to test.  I did the following:

  1 created a new web application from merger in JDev 12.1.3.

  2 objects of business created for 1 table

  3. create a simple page (jspx) for testing

  4 dropped the table on the side of Center of a PanelStretchLayout on the page as a table read-only with sorting and single-row selection enabled.

  5. changed the property table DisplayRow selected.  No other property has changed.

  When I run the application, the table appears and is filled as expected.  However, after you select at random the rows in the table, the application will lose focus and become hidden behind other applications on my desktop.  If I bring the application in the foreground and try again the same thing will happen.  After the selections of line 1 X application will disappear from the screen.

  I decided to reproduce the JDev 12.1.2 test.  In JDev 12.1.2 the application behaves as expected.  Never, the application loses focus after several attempts to select a field.

  I wonder if something in the hotfix released to correct the 12 c/Internet Explorer 11 questions is the culprit.

  Everyone knows about this problem?  I hope there is a change of ownership that I do in 12.1.3 to solve the problem.

  Thanks in advance!

  A solution that seems to work...

  Add a clientListener inside the table

  Add a javascript method

  function handleTableSelection() {
    window.focus();
  }
  

  Just seems to bring the window to the front without changing anything, as far as I can tell.