Errors/problems with my brand-new Equium A200 15I (including video material)

Hello

I am treated to a new computer laptop last Saturday and only had for about 3 and a half days so far but I noticed a few things that I wasn't sure were errors/defects or if it was simply because its news, like the fact that sometimes I type with the keyboard and some letters do not appear on the screen , I think it's probably more to do with me not type or support pretty strongly on the keys rather than anything else, his is not so much now... the touchpad becomes a bit sticky too and he thinks I want to scroll up and down when I move the cursor does not scroll sometimes but I managed to make it work I think that most laptops have glitches like that and no doubt I could help fix it in calibrating the pad (?) touch I did have time to consider the issue and yet if... There are a few other things well and more disturbing than this morning I got an error of video material, so now im a little just worried or suspicious that it may be a real fault with him and would like to know if it is the case, if its something I can fix eventually (im no expert especially with the material, but I can always try to download and installation of updates / corrections and this kind of thing so she could solve the problems).

The main thing that concerns me more, is that this morning a message suddenly come to the screen, warning me that there was an error in video material, last night, I clicked on a button, I think for load more information. and I took this perforated cap of it: -.

http://img528.imageshack.us/img528/724/errorscreencapcw1.jpg

I thought it may be useful to view the actual complete message rather try everything and paste the info., ok to be honest I've not noticed it allow you to copy to the Clipboard, but good (oops lol).

I know there is a topic on a similar error, but I didn't want end-to-end on this discussion because I assume that it should be for this mistake of people who will be discussed, mine may be slightly different, I don't know... I followed the instructions given in this discussion and I checked the Device Manager and no material defects are appearing, btw it is said in the Manager of peripheral devices, graphics cards, it's a Mobile Intel 945 GM Express Chipset Family, I'm sure that all laptops A200 15I have the same card, but I thought I would just make it clear that. Incase that wasn't the right thing to check I also checked under "Audio, video and game controllers" (as the error says it was a video hardware error) where it lists the only as being "Realtek High Definition" Audio and I checked the properties, both under properties it says that the device works properly, without signs of defects...

The thing is, I had read somewhere online that there is a problem with the graphics or video cards. I had read that they can be glitchy and sometimes break after a year. I also asked my father about it and we looked at it as a graphics card Intel that came with this laptop, which it is, and we counted that the Intel chips is as reliable as any other brand really... so I don't think there should be a problem, well that is there I have until September next for repair prior to the expiration of the warranty!

What surprises or sort of worry, however, is that the error message was only introduced to me this morning. It dates from error, as having occurred at 19:53. I use it at night last, and infact, I went to take a shower and I put the laptop down before you go take a shower at around 19:35, I assumed that its ok just close the lid and it would automatically go into hibernate mode or something similar (?) im wondering if that had something to do with it as I 19:53 would have been about when I came back and lifted the lid/screen again to use the laptop again... I can only assume, given the time, he cites, is what caused the failure?

It gives me the option to "update driver software" and "hardware change analysis" in the Device Manager, can I run both, or one of those who maybe? is this a common problem? should I worry at all etc...

Any help is very appreciated, if more info. Please let me know and ill clarify what I can. Also in terms of whats installed, I have quite a few programs, for graphics, I have an old version of Paint Shop Pro, which I installed it yesterday morning, it seems to install fine, it is Jasc Paint Shop Pro 7, I have also some programs of converter (for files vid, 3GP and other things), scan antivirus AVG, Spybot Search & Destory DBPowerAmp, FTP Commander, Quicktime and Real Player, pretty basic stuff like that, nothing, just my old photos and vid files I transferred from my old laptop XP to it, in my documents... I don't have all the Senior Games motorized or complicated or anything else like that installed. Also at that time, indicates the video hardware error message, everything that was in progress when I got the cover down (or before putting the lid down) would have been Windows Live Messenger (although I'm pretty sure that I registered before putting the lid down) and an IE window , im pretty sure that's it, I was not working on anything just check the ' net...

There are other things I noticed as I thought that maybe I should mention (?), something I've noticed he's doing is the screen goes blank and then back very quickly, a lot. I already asked about it a day or so there at that time, I realized he was only doing that before loading the "Windows needs your permission to continue" window/message, who apparently its supposed to do and something to with the computer to switch to display the normal desktop to the secure desktop, I kind of understand lol.
So I think that's not something to worry about but I noticed during the lastday, that the screen seems to do it more, goes blank then back again, even if the authorization message does not appear.

For example, this morning, when I first put on and am went to check out my home page, I clicked on a link at the bottom of the page or anywhere where to load another page into the site and display deleted for a while before coming back a second later with the requested page. Is this normal too? or an associated Vista glitch, or is it possible that there may be a small problem with the monitor? Incase of im guessing it can be more than one thing in Vista, but I thought I would ask here, I decided to not pay for any extra insurance/warranty extension because I am very careful with my items and take care of them and so I'm being careful to try to spot defects early, while they may be repairable under the basic warranty and what-not...

Another thing I noticed is that start with, when I pressed on and kept the 'FN' key, a variety of icons, black and white appeared on the screen that told me what F button (s) to use to make certain adjustments, there still is that when I try right now, but at other times, it does not show icons , no matter how long I hold down the "fn". That didn't matter because I can tell by the symbols on the keyboard press what buttons but its just inconsistent, is there a reason why sometimes the row of icons on the screen will appear when I press and hold the "FN" key and other times it doesn't show at all?

Also sometimes if I move the slider to the right to the top of the screen, these icons loading as they always seem to be located at the top of the screen, but sometimes it's a problem, if im trying to click on something else and one of these icons rises instead... I'm sure that you can disable this option in sort , but I'd be worried that the icons do not always show when I press and hold the right Button (?) just try to be careful!

I think that this post is long enough and I don't see what else I could possibly add to help, so I'll leave this here. I don't want to sound too paranoid, but thought it is better to talk about this kind of things incase someone recognizes these defects/errors and can recommend a way fast to resolve potential problems before they can develop into what whether it is worse... Thank you very much in advance for any help on any of these issues!

(mods let me know if im wrong to include so many things in a subject, I fact kind of this quickly and I apologize if im breaking any rules, I don't want to, if possible please break this into a few different themes or I can do it, although ill be at work frm 2-21:00 today so maybe not back and able to check here until Thursday morning (October 4))

Hey Isla

Your message is really very, very long. I think it's too long to read twice ;) s

. Regarding your questions on this laptop well. Looks like you have installed many applications and 3 third party programs. In such cases, it s not easy to say if these problems are software or hardware related. But I guess that its software.

I checked your screenshot pic, but I've never seen this error message. But it looks like something wrong with the graphics driver. The message says something, live events of kernel
The core services are required by other parts of the operating system as for example graphics card driver.

In this case I recommend updating the graphics driver. According to you, this message an Intel GPU. So you can see the Intel page for the driver for the graphics chip compatible.

With regard to the key issue of the FN;
The Toshiba FlashCard utility controls the key features of the FN. I read in this forum that this application does not smoothly run and in some cases it causes some issues. The new update should solve the problems. You should check the Toshiba driver page. The utility of FlashCard is a part of the Toshiba value added package.

So finally a tip more:
You should always check the updates of Vista on the Microsoft page. This operating system is not perfect and Microsoft releases hotfixes and patches very often

I hope that it would help a little.

If necessary just ask for more information :)

Concerning

Tags: Toshiba

Similar Questions

  • Oh the blackBerry Smartphone help me, I had a lot of problems with my brand new BB bold 9870

    Hi all

    I thought about putting in place BB is so simple, just as it should. I read step by step how to install etc email account, but to set up my e-mail account does not work, my BBM will not work, I can not send or invite message to the other members of BBM surveys, I can't open my social network. If my email set up doesn't work not does not matter but please help me at least my BBM work, can someone send me BBM message, just to try. He thought Blackberry smartphone, that's really smart?

    Hello

    I answer you yet once here. Due to a problem with BIS, you should deal with this problem. Call your network for more information on this.

  • Equium A200 15I audio don't deliver - C00D11E5 - no speakers error code

    Hello

    the speakers of my Equium A200-15I went suddenly silent. They speak too low. It is not cut and the control managers say that it works correctly.
    It works with some other external stakeholders. but my speakers before you say anything. the error code I got is C00D11E5 with media player.

    Help please

    This error is not known to me and it seems that there is not a lot of people with questions of the error
    First of all, you should try to remove you sound driver should and then reinstall again.

    On the Toshiba page, you will find the compatible driver.

    The question remains then you should recover the laptop with the Toshiba Recovery CD. Usually, if your notebook malfunction s material doesn t then a recovery CD should solve this problem. Otherwise, the hardware may be faulty and the laptop everything should be checked.

    Best regards

  • Error code 101-752 dotnet framework error, problems to load the new software of the printer

    Error code 101-752 dotnet framework error, problems to load the new software of the printer

    Hello

    (1) have you made changes before the start of this issue?

    (2) when you get the error message?

    (3) is the specific question of the installation of the printer software?

    (4) what is the brand and model of the printer?

    It seems that you need to fix .net Framework installed on the computer. Follow this link and see if it helps.

    Fix the .net Framework installation

    http://support.Microsoft.com/kb/976982/en-us

    Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756 /) how to back up and restore the registry in Windows

    See also:

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    Let us know if that helps.

  • How to use the resolution to 1280 * 768 on external TV with Equium A200-15i

    I have my laptop Equium A200-15i hooked to my Bravia HDTV which accepts entries to 800 * 600, 1024 * 768 and 1280 * 768.
    But my laptop will be released only in 800 * 600, 1024 * 768 and 1280 * 600 and I want to use the full screen on my TV.

    I read a few other posts on this subject and I think that the problem lies in the BIOS, and I've not being updated since I got it in September, but I was wondering too since I'm Dual-booting Vista and XP pro, there will be problems with the BIOS I download?

    There seems to be two more different for Vista and XP, who apparently get along out of each other.

    Finally, update the BIOS problem will be solved my monitor extended?
    And updated the BIOS using the BIOS XP Download break my laptop/vista partition?

    Should I just not bother with the Dual-boot and go Vista/XP only?

    Thanks in advance

    The BIOS is not the problem!

    The fact is that your display driver doesn't support the resolution of 1280 * 768, and so you can't choose it.

    Once again;
    > Finally, update the BIOS fix my extended monitor?
    No, as I said above, you can't choose your preferred resolution because it s not included in the graphics driver.

    > And updated the BIOS using the BIOS XP Download break my laptop/vista partition?
    No, but if Vista is installed on the laptop then I advise you to use the version of vista BIOS.

    > Should I just not bother with the Dual-boot and go Vista/XP only?
    Dual-boot is recommended according to me ;)
    I have dual boot on my second notebook too. Dual boot has many advantages...
    As you know from the beginning of the applications don't run correctly with Vista and if you have installed XP then you can run it without big problem ;)

    Welcome them

  • Equium A200-15i - loss of internet connection

    Hello!

    I have a really strange problem with my Equium A200-15i. My computer loses the connection with the internet very often.

    Connectivity shows that I am connected to the LAN or WLAN (if I use an ethernet cable). However, I am not connected to the internet. The network said "connected" icon, but everytime I open IE, the display shows 'page not available', my email client and communicators do not work as well.

    I checked all the wireless and ethernet settings and they are ok. Ive has run the diagnostics - ok. Device Manager indicates NICs (lan and wlan) are working properly. Router (BT HUB) is ok, there are more than two computers with it and they work perfectly (another computer laptop workes on wireless and PC is connected with the cable), so the problem is with my Toshiba only. Also, I say that we had a differenf router before and everything was good.

    When I restart my laptop it is internet connection but not for long. After a few reboots even who stops to help and I get the message "connected to the unidentified network, limmited to access" or sth like that. Then I restart the router security settings, fix it again and put the new settings into my laptop. This may help, but not for long... After a few days or a few hours sometimes everything again.

    Anyone, please help. I'm really, really confused :(:(

    Hello

    Please talk to WLAN and LAN connectivity separately? As a first step, it will be interesting to know what is with LAN connectivity. If you disable WLAN you are able to use permanent LAN connectivity?

    In most cases people have problems with WIFI but not so often with LAN connectivity because of that as a first step, that I just want to know if the local network works well. I have 3 laptops connected to my router and have never noticed any problem with the connection to the local network. I must say that I have the PPPOE settings. All of the TCP/IP parameters are set automatically to.

  • Should I in fact this recovery DVD - Equium A200-15I

    Hello

    I have a laptop Equium A200-15I series. For reasons too long to describe here, I don't have the DVD of master restoration - it was not provided with the product and after that a long period, I was told that I would have to pay for it. Not fair, but there you go!

    My request is that the hidden partition on the laptop is still there and what I want to know is that can still recover my windows Vista environment by hitting the F8 key at startup upwards and crosses the screen of recovery without the DVD Master procedure or do I absolutely this disc.

    I am aware that all media that comes with the DVD won't be available, but this isn't a problem.

    I hope someone can help

    Best regards

    Hello Seamus

    To be honest, I'm a little confused, and at first, I just want to clarify something. Notebooks (A200 series) are supplied with recovery DVDs and these books have no recovery image on the HARD disk and you cannot install the OS by using advanced startup options (F8).

    New laptops like A300 models are supplied without recovery media and recovery image is saved on the HARD drive and there is a possibility to install the OS without recovery DVDs. The recovery image is saved on the second partition in HDD Recovery folder. Drive HARD recovery can be done if this folder is not removed.

    If you want to have the factory settings again you need recovery (DVD) image. You can also purchase Microsoft Vista DVD facilities and install your own operating system. All the drivers, tools and utilities that you can find on Toshiba supports the page. Of course some other software like Norton or WinDVD player are not downloadable.

  • Unable to get Internet using modem internal dial on Equium A200-15i

    Using my new laptop EQuium A200-15i while a Wi-Fi by Netgear has been created, I could not get the internal modem to dial up to my ISP on PAYG (to serve as a backup in case of need).
    Device Manager indicates the modem is not working properly and the driver is up-to-date. The number of dial ISP (Virgin) is also correct - I can connect to the internet using the same number of ISP of my desktop computer.
    I think I put in place the ISP connection correctly - I get a ringtone of the laptop but every time can not pass and a screen of failure rises. Y at - it still configuration of Toshiba laptop that is needed?
    The modem would be defective? Is there a technical contact E-mail for Toshiba
    Any ideas?

    Hello

    In the first post you talked you a failure screen which appears after the failure of the modem connection. Could you please post the error message?

    In addition, it would be desirable to set up the Modem region selection utility that should be in programs-> Toshiba-> Networking folder.
    Delete the old profile and create a new one.

    Good luck

  • Need to drive recovery for Equium A200-15i

    I'm a noobie and posted this query in the box Equium, so apologies for swap. I bought an Equium A200-15i computer about a month ago. There was _no_ recover CDs in the box just the Windows Anytime upgrade disc. I contacted the store where I bought the computer to be told to put in the computer and they would take the details of it in order to create or order the CD. I did this and then said that they would have to wait until 'a guy' is established at the end of week, who knew how to create these discs and back again once then.

    Because of the great distance involved in travel, I was reluctant to make a second trip to the store and suggested that if they take all the details of the computer now, they should be able to create this disc and then after it me. I still have not received this drive at all. Now at the same time, the guys at 'tech' in the shop said they believed that I wouldn't need a CD master. In addition, they imply that it should be possible to create this disk myself at the first start-up or windows environment itself. I do not remember this option of provision for me at this time and I can't find anything on the computer that would allow me to accomplish such a task.

    Here, I'm confused. I know not enough about computers to realize that you need a Master CD to recover a system failure major hard drive or simply to clean and re-all over again!

    What are your thoughts on this situation? Should this model really a MAster CD. How do you create one. What should I do next? Thanks for your time and your patience with me on this

    null

    Hello

    I wonder why you did not receive the Toshiba Recovery CD with your laptop.
    I'm 100% sure that the CD or the DVD should be bundled with the laptop Toshiba together
    I put t know if the package was already opened or not, but the DVD must be available!

    SO either you go ask your original dealer of laptop to a Toshiba Recovery CD or simply contact you the Toshiba ASP and will be stopped a new!

    Concerning

  • Equium A200-15I - how to install more memory?

    My memory in my Equium A200 - 15I SERIES is at MAX, what is.

    How it came to new 2x1GB can these be removed and install more memory

    Hey hun01,

    I searched a bit using Google and the Equium A200-15I is equipped with an Intel 943GML chipset and this means that the laptop can use up to 2 GB of RAM (2 x 1 GB modules).
    If your laptop is already equipped with two 1 GB modules you can t upgrade it and if not you PC2-5300 modules to upgrade your laptop.

    In addition, you should also check the user manual where you can find additional information about it.

  • Equium A200-15I - cannot connect to networks

    I have an Equium A200-15I and unable to connect to wireless networks. I can connect properly to my network wireless at home and in the past have had no problem connecting to networks wireless in other places.

    However, recently I have been unable to connect to random networks, some security enabled (for which I have the password) and one that was not secure, but that I have connected to in the past (to my parents house in the middle of the campaign, so no need to secure). He found fine networks and I can click on connect and put the password and then it flashes just between IP address acquisition and disconnected and not connects. I know that passwords are correct. I tried connected to the network woreless manually, and the same thing happens. It's really frustrating.

    I also have problems in playback of some DVD.

    I would appreciate help with this.

    Thank you

    Hello

    The WLAN driver is perhaps the reason for this and the work of doesn t correctly. You should check the Toshiba for WLAN driver update page:
    http://APS2.toshiba-tro.de/WLAN/

    In addition these WLAN issues may have different reasons. Also, a bad WLAN configuration would be possible. So, you should check the WLAN settings and configuration of the router. Also, an update of the firmware on the router could be useful.

  • Equium A200-15I - need part number of battery

    Hello

    I have a laptop Equium A200-15I and its original battery has been lost. I want to buy a new one, but I need to know the part number of the original battery.

    Any body know what is the part number of the original battery?

    Thank you very much

    Toshiba offers several batteries 6 different cells for this old Equium and they have a capacity between 4000mAh and 5800mAh.

    Here is the list:

    4000mAh - PA3534U-1BRS/1BAS
    4000mAh - 1BAS/PA3522U-1BRS
    4400mAh - 3BAS/PA3285U-3BRS
    4700mAh - 5BAS/PA3191U-5BRS
    5200mAh - 1BRS/PA3594U-1BAS
    5800mah - PA3612U-1BAS/BRS

    If you have any other questions you are welcome.

  • Equium A200-15i: I can't use the touch pad - no response

    I can't use the touchpad in my equium A200-15i.
    When I press the button, there is no response at all.

    Please help me to solve it.
    I tried to uninstall the program and reinstalled, but the problem persists.

    Hello

    Have you checked if the touchpad is properly activated?

    Using the FN + F9 key combination, you can disable and enable the touchpad feature!
    Please check this function if you have not disabled the touchpad accidentally!

    Last but not least, I would recommend checking settings the touchpad mice control-> Advanced-> advanced settings panel.
    You will find different options that can be configured to use all available touchpad features.

    Best regards

  • Re: Equium A200-15I - crack suddenly appeared on the screen

    Hello

    I bought a Toshiba Equium A200-15I laptop about 15 months ago, and I'm not sure that this is under any kind of warranty or not.

    A few weeks ago I tried to turn on the laptop but a crack suddenly appeared on the screen and the screen has been damaged. It seems as if the crack is internal, because I can't feel anything on the surface of the screen.

    I wonder how it is possible to know if the laptop is under warranty or not, and if not, if it is possible to fix the problem.

    Thank you very much
    Ken

    Hello

    This guy s shame

    I fear that this issue is not could be covered by warranty m.
    These cracks may not appear without reason
    I think that something touched the screen and led to this crack

    In any case, you could simply ask a technician ASP in your country for details and the manipulation of the Fryer, but I doubt that the warranty would cover replacement.

    Welcome them

  • Equium A200-15i - need the original BIOS

    I would be very grateful if you could send me a link to the original bios for the EQUIUM A200-15i.

    Thanks in advance, Michael

    Hello

    On the European driver Toshiba page, you will always find new versions of BIOS.
    Older versions of BIOS are not downloadable, and I think that you will need to contact the ASP in your County to get this older BIOS.

    Concerning

Maybe you are looking for