Material initialisieren

Similar Questions

• I am (early 2013) iMac 21.5 inch 8 GB which is sutting down then restart unexpectedly often more than once a day. I ran the diagnostics of material, check the permissions and disk. All are no problem. Any suggestions?

  I have an iMac (early 2013 21.5 inch 8 GB) which stops and then restarts unexpectedly often more than once a day. I ran the diagnostics of material, check the permissions and disk. All are no problem. Any suggestions? I bought this machine this June last at B & H in New York.

  Please post a report of EtreCheckof your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

• I have a MBP of 2009 end. I updated the material to 8 GB of ram with an SSD of 240gig. I want to run the new OSX, but is not on the list approved for the update. Anyone know why?

  I have a MBP of 2009 end. I updated the material to 8 GB of ram with an SSD of 240gig. I want to run the new OSX, but is not on the list approved for the update. Anyone know why?

  It is a decision that was made by Apple.  El Capitan is the newest OSX that will support a 2009 MBP.

  This is not uncommon.  My 2006 MBP came with Tiger, but is limited to OSX Snow Leopard.

  Old hardware ends up by becoming obsolete with newer technology.

  Ciao.

• Bluetooth not identified in the material

  Last night my bluetooth keyboard and mouse were connected without problem.  This morning, on the other hand, at the start of my Macbook Air (2.2 GHz Intel Core i7), according to preview it, the hardware system, report had no Bluetooth hardware! Of course, after a restart the bluetooth material has been and remains is recognized. Any suggestions of what this might be, beyond a simple hiccups?

  More than likely just a hiccup, but make sure that your Mac OS X is up to date.

  Open the App Store, and then select the updates menu.

• Why apple did stop their 'material' servers?

  Why apple not stop their servers 'material' software, I understand that it is always available in the app store.

  It was not a deal that worked for them. Form Apart the Xserve (who they have stopped selling in 2011) all the other servers were simply ordinary Mac OSX Server.

  As you say, you can update osX to the alternative server for just £15.

• How to make a material test

  I have a 27-inch iMac made in middle of 2010 running os 10.11.5 and wish to proceed with a trial of material.  When I hold down the option key + d I get a message that my mac cannot run and then test.

  Thank you

  You will need its origin, gray, The installation of the Applications DVD. It will have the words "AHT version...". "printed on it.

  Insert it into the optical drive and then stop your Mac. Turn it on using the power button. Press and hold the D key immediately after hearing the startup sound.

  Using Apple Hardware Test - Apple Support

• removal of the cable for material test

  Hi I want to do a test om my IMac equipment

  I am connected to the internet with an ethernet cable plugged into my router and the iMac.

  Do I have to disconnect the ethernet cable to try out material?

  amandafromwr wrote:

  Hi I want to do a test om my IMac equipment

  I am connected to the internet with an ethernet cable plugged into my router and the iMac.

  Do I have to disconnect the ethernet cable to try out material?

  NO.

• MacBook Air 11 "(mi-2011) material issue"

  Hi, I had a MacBook Air "Core i5" 1.6 11 "(mid-2011) a few months ago by my sister. I'm new to Mac, but I've been fixing PC for more than 20 years. Need a little advice on the model of this issue.

  Full specs are here MacBook Air (11 inch, mid 2011) - technical specifications

  Short story is that the Macbook Air was dead. After buying the screwdriver specialized to open the macbook air, I managed to get out the internal SSD Flashdrive on but as Apple uses customized connectors I had to buy an external case to test the drive and he was DEAD.

  So I installed El Capitan on an EXTERNAL drive plugged into the USB. It's a plus for Apple to initialize external drives and a nice feature.

  Once I got the macbook air I found following several breakdowns of equipment.

  1 SSD drive is dead

  2 camera and the Microphone is dead. No facetime.

  3 the POWER BUTTON is dead and holding down the macbook air will not shut. (I had to unplug the connector from the motherboard) This allowed me to switch on/off the computer buy pulling on the magsafe power supply.

  I have been fixing computers based on Windows for decades and never seen so many parts fail both.    WHAT CAN CAUSE THIS?

  At first I thought it was the logic board at fault, but I doubt that is the case. I can only assume a power SURGE or something to do as much damage.

  I was hoping to get this up and running for my daughter from school to save money, but unfortunately not the case. The price of all the ssd drive is high and he still has a chance to not work if the logic board is also damaged.

  THEN AND MATERIAL SPECIALISTS MACBOOK GOT SOME ADVICE?

  It's true that to fix the power button that is dead the keyboard needs to be replaced?

  Advice would be useful. For now I am able to use with the base of the cover off and the battery disconnected but is now portable way.

  Thank you very much

  cinospotts

  Like you, I had business with the PC and computers relatively old. You have quite the list, and you probably answered your own question. I have studied logic board only and lives at $ 200-300 min. purchase from a reliable source of Apple pieces. In my opinion.

  Put the Mac Air 2011 all back together and its trade.

  Refurbished MacBook Air 2015 11 "Apple. $759,00 with Apple 90 days and 1 year Apple Care warranty. All new accessories. Apple shall be their refurb as new Mac for this new experience of the box. Here is a link:

  Hz-dual-core-Intel-Core-i5 http://www.Apple.com/Shop/Product/FJVM2LL/A/refurbished-116-inch-MacBook-Air-16g

  Nobody here can estimate what your Mac Air recovery value holds, but the Apple Store can discuss with you. I hope this helps!

  Bravo!

• First Graphing Calculator Identification of old Version of main material has

  Hello

  I tried to update the firmware to the latest version (2014-07-02 (6031)) on my graphing calculator of premium without success, the release_info.txt file which indicates (for 2014 03 31 (6030) firmware version):

  There is limited between that backward compatibility and earlier releases.

  First older hardware (revision A) supports this version, but the stream without thread-to-unit and data functionality is not supported on previous models. In the first screen HP help > revision of material appears with the software version information.

  How will I know if my calculator hardware number is A revision material?

  Is the version of CASE the number of material?

  Thank you very much

  H.

  Hello

  All primes of HP are upgraded to the version 6030 (note that 6031 is for PC emulator only). It's just that the material has a problem with certain communications.

  Firmware version prior to 6030 (5447 and older) do not show the hardware version in the display 'a way'.

  When you upgrade to 6030 the hardware version will appear on the display 'a way'.

  Alternatively, you can determine the version of the material from the model number (located on the back of the box she approached, the bar code):

  NW280AA is A revision material

  G8X92AA is the review material C

  In addition, the following process is recommended for the upgrade of the premium:

  Install the connection from the CD Kit.

  Once installed the connection, update the calculator.

  The following method is recommended:

  • Connect your HP Calculator first via the supplied USB cable (connected directly, do not use a USB hub)
  • Start the HP connectivity Kit
  • Click the tab of the calculator
  • Right click on the name of the first HP you want to update (it would be that you connected before starting this procedure)
  • Write down the version number, and then click the OK button
  • Click the Help Menu and select Check for update
  • Look for the pop-up box to update, check the version number that is newer than the one you want to update.
  • Then click on the download button
  • That's it, you will see the update being loaded and installed on your calculator screen. Don't click too quickly out of the HP Connectivity Kit, wait a minute or two after the completion.
  • In addition, there are a step in the connectivity Kit where it is advisable to back up the version that you had before the procedure, just in case. This way, you have a way to cover again.

  Kind regards.

• Re: Equium L40 - 17 M: recovery disk left material inactive

  I had my 17 m crash Psl49e L40 and die.

  I phoned for help and they advised me to run my recovery disk.
  I do so I can boot my laptop BUT no usb device connects, no card network is found over a host of other issues.

  He asked me if I had an add on disk (which I did not) it stopped all readers and setting is correct?

  Hello

  Have you used the Toshiba Recovery disk or have you installed the Windows operating system using a disc of Microsoft?
  I think that the devices do not work due to lack of drivers or bad drivers.

  If USB does not work, then I recommend installing the chipset driver.
  If missing a LAN or WLan card, then install the LAN or / and WLan driver.

  You may need a few details on the devices inside the laptop.
  Install a tool of diagnosis of hardware called Everest Home Edition. This allows to obtain information and material.

• Equium material P200-1ED wireless not detected at all...

  Hello

  You have a problem with my parents computer laptop and I cannot for the life of understand me.

  The wireless on the laptop disappeared completely. It was working fine last night and since then to turn it on this morning, it didn't work. The are no wireless connection in the Connections window and in the Device Manager, nothing is found. Windows is not saying there is a material must be installed and I can't find the drivers to uninstall.

  I tried to install the latest drivers and still nothing was found. Few at the front of the laptop to turn on the wireless or disable control IT. By pressing fn and F8 (the wireless function key) does nothing no more.

  , Someone has any idea how to solve this problem? Any help will be greatly appreciated.

  Thank you very much.

  Hello

  If WLAN adapter is not listed in Device Manager, it means malfunction wlan. The best way to check whether it is hardware or software/driver associated is to restore the settings from the factory with a recovery disk. If she did not always appear, you must contact the service center for repair or buy the usb wifi dongle.

• looking for material for learning numbers

  I am a new MacBook pro and need to learn the numbers as soon as possible. y at - there no material study for numbers? as AutoFill, layout, formula, etc.

  Thank you!!

  Chococat,

  The first place to look is in the numbers > Help Menu:

  

  

• Volume of material control does not not on Portege M200

  I have a new Portégé M200.
  The sound works perfectly and I can control it through the software volume control (e.g. in control panels, taskbar,...)
  But the material volume control (rotary switch on board before) does not work. I have checked all the manuals, dash (Volume, SoundMAX,...) but can't find anything.

  What's wrong?
  -marc

  Hi Marc

  This is obviously a defect of material. AFAIK there is no adjustment for volume control dial on the front button of the Portege. This button cannot be enabled or disabled. I put t know how old is your device, but I assume that the warranty is still valid. Contact the Service partner and let check the device. Warranty will cover all costs.

  Good bye

• Satellite M40X - material works does not after re-installation

  Hello

  I just reinstalled my Satellite M40X with a WXP Pro. For some reason all the edge
  hardware does not work and it is still impossible to install it manually.
  Does not not to date:
  W - Lan (not shown)
  Controllers USB (although my usb mouse works fine)
  all of the controllers listed in the list of material

  I tried to download the drivers from the hp toshiba but nothing worked
  I could not find the drivers for the controllers in general.

  If you have suggestions please tell me

  Best regards

  Jan

  My first question; why don t you use the recovery CD?
  My second question: WinXP Pro contains SP2?

  Hey dude, or you have installed the fake software, drivers or / and updates are missing.

  First install all updates from Microsoft and secondly if you install divers manually do not forget that you do it in the right order!
  Did you check the Toshiba driver page exactly? You will find installation instructions. Have you followed this guide line?

  I thik you know now what to do.

• Errors/problems with my brand-new Equium A200 15I (including video material)

  Hello

  I am treated to a new computer laptop last Saturday and only had for about 3 and a half days so far but I noticed a few things that I wasn't sure were errors/defects or if it was simply because its news, like the fact that sometimes I type with the keyboard and some letters do not appear on the screen , I think it's probably more to do with me not type or support pretty strongly on the keys rather than anything else, his is not so much now... the touchpad becomes a bit sticky too and he thinks I want to scroll up and down when I move the cursor does not scroll sometimes but I managed to make it work I think that most laptops have glitches like that and no doubt I could help fix it in calibrating the pad (?) touch I did have time to consider the issue and yet if... There are a few other things well and more disturbing than this morning I got an error of video material, so now im a little just worried or suspicious that it may be a real fault with him and would like to know if it is the case, if its something I can fix eventually (im no expert especially with the material, but I can always try to download and installation of updates / corrections and this kind of thing so she could solve the problems).

  The main thing that concerns me more, is that this morning a message suddenly come to the screen, warning me that there was an error in video material, last night, I clicked on a button, I think for load more information. and I took this perforated cap of it: -.

  http://img528.imageshack.us/img528/724/errorscreencapcw1.jpg

  I thought it may be useful to view the actual complete message rather try everything and paste the info., ok to be honest I've not noticed it allow you to copy to the Clipboard, but good (oops lol).

  I know there is a topic on a similar error, but I didn't want end-to-end on this discussion because I assume that it should be for this mistake of people who will be discussed, mine may be slightly different, I don't know... I followed the instructions given in this discussion and I checked the Device Manager and no material defects are appearing, btw it is said in the Manager of peripheral devices, graphics cards, it's a Mobile Intel 945 GM Express Chipset Family, I'm sure that all laptops A200 15I have the same card, but I thought I would just make it clear that. Incase that wasn't the right thing to check I also checked under "Audio, video and game controllers" (as the error says it was a video hardware error) where it lists the only as being "Realtek High Definition" Audio and I checked the properties, both under properties it says that the device works properly, without signs of defects...

  The thing is, I had read somewhere online that there is a problem with the graphics or video cards. I had read that they can be glitchy and sometimes break after a year. I also asked my father about it and we looked at it as a graphics card Intel that came with this laptop, which it is, and we counted that the Intel chips is as reliable as any other brand really... so I don't think there should be a problem, well that is there I have until September next for repair prior to the expiration of the warranty!

  What surprises or sort of worry, however, is that the error message was only introduced to me this morning. It dates from error, as having occurred at 19:53. I use it at night last, and infact, I went to take a shower and I put the laptop down before you go take a shower at around 19:35, I assumed that its ok just close the lid and it would automatically go into hibernate mode or something similar (?) im wondering if that had something to do with it as I 19:53 would have been about when I came back and lifted the lid/screen again to use the laptop again... I can only assume, given the time, he cites, is what caused the failure?

  It gives me the option to "update driver software" and "hardware change analysis" in the Device Manager, can I run both, or one of those who maybe? is this a common problem? should I worry at all etc...

  Any help is very appreciated, if more info. Please let me know and ill clarify what I can. Also in terms of whats installed, I have quite a few programs, for graphics, I have an old version of Paint Shop Pro, which I installed it yesterday morning, it seems to install fine, it is Jasc Paint Shop Pro 7, I have also some programs of converter (for files vid, 3GP and other things), scan antivirus AVG, Spybot Search & Destory DBPowerAmp, FTP Commander, Quicktime and Real Player, pretty basic stuff like that, nothing, just my old photos and vid files I transferred from my old laptop XP to it, in my documents... I don't have all the Senior Games motorized or complicated or anything else like that installed. Also at that time, indicates the video hardware error message, everything that was in progress when I got the cover down (or before putting the lid down) would have been Windows Live Messenger (although I'm pretty sure that I registered before putting the lid down) and an IE window , im pretty sure that's it, I was not working on anything just check the ' net...

  There are other things I noticed as I thought that maybe I should mention (?), something I've noticed he's doing is the screen goes blank and then back very quickly, a lot. I already asked about it a day or so there at that time, I realized he was only doing that before loading the "Windows needs your permission to continue" window/message, who apparently its supposed to do and something to with the computer to switch to display the normal desktop to the secure desktop, I kind of understand lol.
  So I think that's not something to worry about but I noticed during the lastday, that the screen seems to do it more, goes blank then back again, even if the authorization message does not appear.

  For example, this morning, when I first put on and am went to check out my home page, I clicked on a link at the bottom of the page or anywhere where to load another page into the site and display deleted for a while before coming back a second later with the requested page. Is this normal too? or an associated Vista glitch, or is it possible that there may be a small problem with the monitor? Incase of im guessing it can be more than one thing in Vista, but I thought I would ask here, I decided to not pay for any extra insurance/warranty extension because I am very careful with my items and take care of them and so I'm being careful to try to spot defects early, while they may be repairable under the basic warranty and what-not...

  Another thing I noticed is that start with, when I pressed on and kept the 'FN' key, a variety of icons, black and white appeared on the screen that told me what F button (s) to use to make certain adjustments, there still is that when I try right now, but at other times, it does not show icons , no matter how long I hold down the "fn". That didn't matter because I can tell by the symbols on the keyboard press what buttons but its just inconsistent, is there a reason why sometimes the row of icons on the screen will appear when I press and hold the "FN" key and other times it doesn't show at all?

  Also sometimes if I move the slider to the right to the top of the screen, these icons loading as they always seem to be located at the top of the screen, but sometimes it's a problem, if im trying to click on something else and one of these icons rises instead... I'm sure that you can disable this option in sort , but I'd be worried that the icons do not always show when I press and hold the right Button (?) just try to be careful!

  I think that this post is long enough and I don't see what else I could possibly add to help, so I'll leave this here. I don't want to sound too paranoid, but thought it is better to talk about this kind of things incase someone recognizes these defects/errors and can recommend a way fast to resolve potential problems before they can develop into what whether it is worse... Thank you very much in advance for any help on any of these issues!

  (mods let me know if im wrong to include so many things in a subject, I fact kind of this quickly and I apologize if im breaking any rules, I don't want to, if possible please break this into a few different themes or I can do it, although ill be at work frm 2-21:00 today so maybe not back and able to check here until Thursday morning (October 4))

  Hey Isla

  Your message is really very, very long. I think it's too long to read twice ;) s

  . Regarding your questions on this laptop well. Looks like you have installed many applications and 3 third party programs. In such cases, it s not easy to say if these problems are software or hardware related. But I guess that its software.

  I checked your screenshot pic, but I've never seen this error message. But it looks like something wrong with the graphics driver. The message says something, live events of kernel
  The core services are required by other parts of the operating system as for example graphics card driver.

  In this case I recommend updating the graphics driver. According to you, this message an Intel GPU. So you can see the Intel page for the driver for the graphics chip compatible.

  With regard to the key issue of the FN;
  The Toshiba FlashCard utility controls the key features of the FN. I read in this forum that this application does not smoothly run and in some cases it causes some issues. The new update should solve the problems. You should check the Toshiba driver page. The utility of FlashCard is a part of the Toshiba value added package.

  So finally a tip more:
  You should always check the updates of Vista on the Microsoft page. This operating system is not perfect and Microsoft releases hotfixes and patches very often

  I hope that it would help a little.

  If necessary just ask for more information :)

  Concerning