Material out of tolerance

Similar Questions

• Can I still use my PCI-4351 for readings of tc type t, even if the unit is out of tolerance in the +/-2 .5V range?

  Hello

  I use a PCI-4351 for readings of TC type T, and after receiving it back from calibration, the 2.5V range came out by - 0.00003 V.  The rest of the calibration is within the tolerance.  Please tell us if the 2.5V range is used for playback of the thermocouple type T with the accessory CB - 68 t.  From my understanding, I don't think that the 0.625V beach is used for measurements of TC, and they all calibration.

  Thank you for your help.

  Michael Carter

  Hi Michael,

  You're right that you'll only need the gamme.625 for this measure.

  I am very disappointed to hear that your device was not properly calibrated.  It was our calibration?  If it were, I can try to you allow to send to us or something like that to remedy this situation.

  If there is anything else I can do to help correct this problem please let me know.

• try reinstalling - cannot get Windows XP drivers working but material out Linux LiveCD work

  After having picked up some malware on microtour DX7300 of my wife, I decided to reformat the disk and reinstall.  For years and do not have a copy of the diskette of HP recovery that was created when we arrived first of all the computer.

  I have a copy of Windows XP Pro, installed in such a way that very well.  Device Manager is reported the driver problems with a large part of the devices as ethernet controller, audio, video etc.  I guess I can install most of the people afterwards, except the network/ethernet because I need, obviously, to connect to the internet.  Would have hoped that these devices are plug n play, but apparently not.

  I used a Ubuntu LiveCD to connect to internet.  So I know the network interface hardware works, and even audio and video resolution were out of the LiveCD.

  Found the drivers on this site:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3251397&...

  Those downloaded across the network.  In reading the DX7300, it is clear to me if the network card is the Broadcomm one or Intel.  Rebooted WinXP, I tried installing the Intel driver, got an error message no Intel device not found.  So I guess that's the Broadcomm one.  This driver, installation actually installed.  However, even after a reboot the network device does not work and presents itself as an error in the Device Manager.

  Thought I'd try to manually install the drivers by pointing "drivers" unpacked in the directory of installation above.  Windows indicated that the correct drivers were not found there.

  I'm at one end.  The material seems to work under linux, but cannot get the win to install the drivers.  Advice or help appreciated.

  Hello:

  This is exactly what I need.

  First install the Chipset driver and reboot:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=3251394&prodNameId=3251397&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=ir-57823-1

  Then, install the graphics driver;

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=3251394&prodNameId=3251397&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=vc-68806-1

  Then, install the MS UAA HD Audio Bus driver:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=3251394&swItem=PSG_I23303-108286&prodNameId=3251397&swEnvOID=1093&swLang=13&taskId=135&mode=3

  Then, install the HECI driver:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=3251394&prodNameId=3251397&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=ir-46941-1

  Now for your pesky NIC... It's a NIC from Intel.

  Let's try this 'one size fits all' network driver Intel: you want the first listed download (XP 32 bit).

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18717&ProdId=1700&lang=eng&OSVersion=Windows%20XP%20%20Professional * & DownloadType = drivers

  Paul

• Timed by analog material out with PXI-6733

  Hello

  I'm a little confused on the possibilities for the material of analog timing of release of a PXI-6733, using pulses of DIO to a separate device.

  I want to generate an analog voltage on the signal for synchronization from another device.

  Lets say I want to generate tensions: 0, 1.3, 8, 0 volt. Sometimes 1 US, 402 U.S., 1004 US, US 1503. (we = micro seconds). I DIO card that will generate TTL pulses in these moments there and let's say I have the latter on a trigger PXI, PFI line line or enter the map of 6733.

  How to configure DAQmx with labview to perform this task?

  Thank you

  Paul.

  Hi Paul,.

  There are many ways we could do this.  The first thing that comes to mind is to sample AO clock battery LIFE of your device.  All you have to do is do an array of doubles with the values that you want to scroll through and then then whenever you get a clock pulse we will update the output.  You can see examples in LabVIEW by going to help > find examples.  "" "The NOR example Finder will appear, and you can find many useful programs in input and output material" DAQmx "analog generation ' record of tension.  To achieve my method, I opened the Gen Cont tension Wfm - Ext Clk.vi example and modified the code as indicated.  I have included the code here for your reference.  In my code, I plug my external clock in the clock via PFI0 source on my card.  Now, whenever I get a pulse I will update the output voltage of 1 to-2 to 3-4, 1-2, etc., ad infinum.

• Error activate Windows 7 Enterprise 0xC004C020

  Recently, I demanded a restoration of a backup of my Win 7 Enterprise install.

  Windows told me that I needed to activate it. During the attempt, I got an error of activation 0xC004C020

  I realize that it is a code of volume and the number of activations has been exceeded. However, the problem is that this error code occurs after a restoration that seems to me to be a problem. I don't understand why this should happen in this case. I can't have a new code for this computer as the financial support of our group is limited. Is there something that can be done?

  Thank you

  Chad

  Copy of MGADiag:

  Diagnostic report (1.9.0019.0):
  -----------------------------------------
  Given WGA-->
  Validation status: genuine
  Validation code: 0

  Code of Validation caching: 0x0
  Windows product key: *-*-*-*-CMG2T
  Windows product key hash: / U4MyqAteUO7TSqPdRah8v/wI + A =
  Windows product ID: 55041-011-1362466-86857
  Windows product ID type: 6
  Windows license type: Volume MAK
  The Windows OS version: 6.1.7601.2.00010100.1.0.004
  ID: {5F1220F6-6E98-4588-9E4B-8685BB0BB8C4} (3)
  Admin: Yes
  TestCab: 0x0
  WGA Version: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Enterprise
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.151230 - 0600
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  WgaER data-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  WGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Users\bryant\AppData\Local\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {5F1220F6-6E98-4588-9E4B-8685BB0BB8C4}1.9.0019.06.1.7601.2.00010100.1.0.004x 64*-*-*-*-BATH55041-011-1362466-868576S-1-5-21-4186114438-3280627768-1025966964the system manufacturer,System Product NameAmerican Megatrends Inc. 2003 20101214000000.000000 + 00079643007018400FE10090409Mountain Standard Time(GMT-07:00)03109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Microsoft(r) Windows(r) 7, Enterprise edition
  Description: operating system Windows - Windows (r) 7, channel VOLUME_MAK
  Activation ID: 9abf5984-9c16-46f2-ad1e-7fe15931a8dd
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 55041-00172-011-136246-03-4105-7601.0000-0242016
  Installation ID: 020650779356417492569075515454457792973534585396491451
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: CMG2T
  License status: additional grace period (KMS license expired or material out of tolerance)
  Time remaining: 41880 minute (s) on (29 day (s))
  Remaining Windows rearm count: 4
  Time to trust: 24/01/2016-15:25:55

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0x00000000
  Beyond: PASS
  Event timestamp: 11:27:2015 23:50
  WAT Activex: registered
  WAT administration service: registered

  --> HWID data
  Current HWID hash: NgAAAAMAAgABAAEAAQACAAAAAgABAAEACrauLPTadxZ0meR45nZYKzCOCoCGB5IyHkjeZnZW

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC1527 APIC 121410
  FACP 121410 FACP1527
  HPET 121410 OEMHPET
  MCFG 121410 OEMMCFG
  121410 OEMB1527 LASRYVITRAGE
  ASPT 121410 PerfTune
  OEMOSFR OSFR 121410
  SSDT DpgPmm CpuPm

  If you have received this through your employer volume license customer, you should contact your employer for help to get it reactivated.

  It's using a Multiple Activation key, if you can try the listed here appropriate phone number: phone numbers Microsoft Activation centers worldwide:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx

• Activation error code: 0x8007007B

  I have bee uses this Windows for a while and she suddenly asks for activation.  When I did, he came back with an error code: 0x8007007B

  Here is the result of MGADiag:

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Code of Validation caching online: 0x0
  Windows product key: *-* - 2VJC9 - XBBR8-HVTHH
  Windows product key hash: k/l/EMDQdwK9OvdCkPtHG1YdosE =
  Windows product ID: 00392-918-5000002-85601
  Windows product ID type: 1
  Windows license Type: customer KMS
  The Windows OS version: 6.1.7601.2.00010100.1.0.004
  ID: {3046C770-74AF-41A0-8790-060997E8B643} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Enterprise
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.150427 - 0707
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 103 blocked VLK
  Microsoft Office Enterprise 2007 - 103 blocked VLK
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {3046C770-74AF-41A0-8790-060997E8B643}1.9.0027.06.1.7601.2.00010100.1.0.004x 64*-*-*-*-HVTHH00392-918-5000002-856011S-1-5-21-2064250715-716513150-4203665033Hewlett-PackardHP EliteBook 8560wHewlett-PackardF.02 ver. 68SVD20110510000000.000000 + 000427D3207018400FE04090409Central Standard Time(GMT-06:00)03HPQOEMSLIC-MPC10310312ACD7202654E586fFic3JgCreGGRxyF8uMWB4R4Jcg = Microsoft Office Enterprise 2007 89388-707-1528066-65713 14

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Microsoft(r) Windows(r) 7, Enterprise edition
  Description: operating system Windows - Windows (r) 7, VOLUME_KMSCLIENT channel
  Activation ID: ae2ee509-1b34-41c0-acb7-6d4650168915
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00392-00170-918-500000-03-1033-7601.0000-1442015
  Installation ID: 018404395961000215775465493490625771094680163553941785
  Partial product key: HVTHH
  License status: additional grace period (KMS license expired or material out of tolerance)
  Time remaining: 36900 minute (s) on (25 day (s))
  Remaining Windows rearm count: 2
  Trust time: 25/05/2015 12:00:45
  Please use /ato slmgr.vbs to activate and update information on KMS clients in order to update the values.

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0x00000000
  Beyond: 0 x 0000000000000000
  Event timestamp: 4:20:2015 04:32
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: NAAAAAEAAgABAAIAAAABAAAABAABAAEAln2o94aqKK1a7/p2OnGYJ5wSGO8ecRCwHhQucw is

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC HPQOEM 1631
  FACP HPQOEM 1631
  HPET HPQOEM 1631
  MCFG HPQOEM 1631
  TCPA HPQOEM 1631
  SSDT HPQOEM SataAhci
  SSDT HPQOEM SataAhci
  SLIC SLIC-MPC HPQOEM
  SSDT HPQOEM SataAhci

  SSDT HPQOEM SataAhci
  SSDT HPQOEM SataAhci
  ASF!            HPQOEM 1631

  Can someone help me solve this problem?

  Thank you very much

  The installed product key is a license key from the KMS Volume - valid ONLY within the network of the issuing organization, and requires periodic reactivation at the level KMS servers in the organization.

  There is no sign that this machine is connected to a network of business or organization.

  Where did you get this installation of Windows 7 Enterprise? (which is itself only a Volume License edition)?

  If this is your school or work, contact the system administrator for assistance.

  If you have purchased this installation - it is wrong.

  ... Oh - and it installed Office 2007 Enterprise is definitely fake!

• A manager of W7 activation fails after migration to a new PC

  Hi all

  I'm new to the Community MS and I come with a problem of activation that I hope you can help me solve.

  I bought a W7 Ultimate in 2010 and I've been enjoying it since then. Activation was no problem then, but now my PC is getting old, and I decided to move the system to another, more modern PC. After moving 'my' W7 Ultimate details to the new PC, with no problems, I was invited to activate it (again).  I first presented as original product key and it was denied. I tried again through the automated phone and at the end of a long process, the voice told me that my copy of W7 is allowed only on one PC.  What is the problem or what to do, I'm wrong? It's very frustrating. I would like to talk to a real person for help from MS, but taxes are not allowed, it's why I try to get help here.

  I ran the MGADT on my computer, and between other information, it found the following (bold and italics are mine):

  Name: Windows 7 Ultimate edition
  Description: Windows operating system - Windows 7, retail channel

  and

  License status: (KMS license expired or material out of tolerance) additional grace period
  Time remaining: 3060 minute (s) on (2 day (s))
  Remaining Windows rearm count: 4.

  Please, help my as soon as possible, because I only have 2 days to resolve.

  Many thanks in advance,

  Malonsoba

  The phone activation and speaking a person live will be the only way for you to get it reactivated. That, or buy a new license.

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Direct activation number: (888) 725-1047

  1-800-936-5700

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

  We do not see the full report which will provide a correct analysis.

• Please help with Activation

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Code of Validation caching online: 0x0
  Windows product key: *-* - 37CDC - C9VQC-4GQDV
  The Windows Product Key hash: g4tbbjyJeQstit1ZPOIaulbOv2o =
  Windows product ID: 00371-835-0915884-85126
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {162B28A5-A170-4B8B-9D9F-CFD8B69EC7AF} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.130828 - 1532
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Users\Ingo\Google Drive\chrome-win32\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {162B28A5-A170-4B8B-9D9F-CFD8B69EC7AF}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-4GQDV00371-835-0915884-851265S-1-5-21-1012373343-1233244361-3486509143Gigabyte Technology Co., Ltd.. Power O.E.M. American Megatrends Inc.. F20 20140319000000.000000 + 00096233C07018400F20c 090409E. Australia Standard Time(GMT+10:00)03109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, retail channel
  Activation ID: e838d943-63ed-4a0b-9fb1-47152908acc9
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00170-835-091588-00-3081-7601.0000-1052014
  Installation ID: 012453962713409236447090722433177701368575726255292840
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 4GQDV
  License status: additional grace period (KMS license expired or material out of tolerance)
  Time left: 2700 minute (s) on (1 day (s))
  Remaining Windows rearm count: 4
  Trust time: 15/04/2014-17:09:26

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: n/a
  Beyond: 0 x 0000000000000000
  Event time stamp: n/a
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID hash: MAAAAAEAAAABAAEAAgACAAAAAgABAAEAHKLkqhCmVLcQqwwW7ha8iRfzbvRYtzQh

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  ALASKA APIC HAS M I
  FACP ALASKA A M I
  HPET ALASKA A M I
  OEMMCFG MCFG IN ALASKA.
  FPDT ALASKA A M I
  SSDT INTEL CpuPm
  CARPET ALASKA A M I

  Separated by the moderator of this thread:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Windows-7-rejecting-product-key-after-BIOS-upgrade/f2c54ff2-79d3-490c-8860-05561226f581#LastReply

  It seems that you have changed some hardware?

  Try the phone Activation and speak to an operator.

  activation by telephone (call of the operator)

  Click the Start button

  in the search box, type

  SLUI 4

  and press the Enter key

  Follow the instructions, but when asked what service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you

• Problems to activate product key please help!

  I recently bought the new hardware to my computer. (mother & Power Supply card) Windows says I have to reactivate, but said that my product key cannot be reused. Why do I need to use my product key? Check the product key spent should not be sufficient?

  I tried checking on product through Control Panel. I called, followed the steps, and the automated call said that I had used before activation code. Duh? !!

  Otherwise, how would I have activated Windows 7 in the first place?

  License status: Notification
  Reason for the notification: 0xC004F00F.

  
  
  This is the code for the material out of tolerance. In simple terms, this means that a significant material change has been made. You must activate by telephone according to the instructions above.

• Help motherboard D10... PLEASE

  I got this motherboard from outside of ebay. I thought he had two 8pin & connector 24 pin for power supply, I now see that the connector next to the main 24pin is a 10pin. I don't have the power supply provided in these systems was ryin to Thermaltake us1000w. I have two 8-pin connectors for power instead of the 10pin used on Delta power supply in these. Also, while looking into obtaining this advice have pulled up, I noticed a few mentions on the power supply diagnostic lights. The absence of this diagnostic configuration would keep the validation jury? When I try to start the system fans spin for about a second and then stops. The power led remains lit, but any other power seems to be cut as wel as the power supply, because the fan is not spinning. I got this power supply used and I know it cuts, but I have not tested under any load. He couldk wellbe my question, but I really am trying find out if there is any reason that this Council would refuse to post without being attached to the PSU oem? Or maybe the absence of another link (such as temperature sensor)? Does anyone have experience with this Board and the PSU afermarket? Or know anythin on the pinout of the psu and weather any deviate son of the game? I have a pair of x 5460, that would be a killer combo with this Council, even if it is a little dated. I did turn them in a poweredge 2950, but I need something with video options that are not only available with this configuration.

  No offense to anyone, but please do not power of basic troubleshooting suggestions. I'm really looking for some information from someone who has had experience working with this material out of the reach of the inaccurate textbooks that are available.

  Well, I went on the Thermaltake PSU for a XFX PSU and it displayed with one x 5460 I had installed. I plugged the connector 24 pin and 2 connectors 8pin to 8pin and 10pin on the motherboard connectors. As other comparable boards use 2 with 24 connector 8pin connectors pins I think it should be safe to ignore account PIN extra 12v on the 10pin connector. I hope this info is useful to someone else, like me, who has met one of these tips for a good price and are already equipped to use.

  The next step is to install Win7 and see if I can run a pair of 260 gtx in sli with HyperSLI. In fact, I intend to get a decent map of Quadro FX to Midway for use with solidworks, etc. and find a better option of game use moderate to replace the gtx 260 with. Suggestions for compatible cards? Bios hacks?

• How can I change the configuration for the output channels analog on a PXI-6704?

  I can't seem to understand how to access the configuration of the channels to the outputs analog (channel 33 and 35) for PXI-6704.

  This piece of test equipment is out of tolerance and must be calibrated.

  I have followed the procedure of calibration http://www.ni.com/pdf/manuals/374081b.pdf, but am getting hung up on step 8, where it is said to repeat steps 4-7 when changing the _cal_ao_current_offset. I can't figure out how to open this channel because it is not listed as a physical channel for step 5.

  I'm using Labview 7.1

  Thank you

  Hello! What you need to do is to add 'Internal channels' to your list of channels, so you can choose the _cal_ao_current_offset or _cal_ao_voltage_offset.  This is done through the drop-down list channel right click and select "I/o name of screening...". ».  There will be a check box that says 'Internal channels' and will provide you with all available internal channels to enter your vi Create Channel.  I have attached some photos illustrating how to do. See you soon!

• black pigmented iP4300 won't print

  Good print head, so the pigmented black cart. They were checked in an another 4300.

  The other four (dye based) colors print ok. There is no error lights or error on Win7. Any ideas? This seems to be unused because purge pads are for the most part still white.

  There was no print to the printer head (the seller was not aware of that).

  Apparently, this is another case of trying to use a print head 'bad' in a good printer causing the Board to sort out.
  Recent experience (read this topic from others and myself), usually the printer dies when this happens (no lights).
  Elsewhere, it was referred to as a 'virus '.

  Trying to replace the logic board (aka the main map) is much easier than trying to replace the purge unit. As someone said it, printers must be the most piece at the disposal of the material out there.

  Of course, it is by design.

• No sound, no new installation of Windows XP Pro SP3

  We had to install Windows XP Pro on a laptop but the sound does not work.  Device Manager displays the details as an "Audio on High Defeinition Bus device" Audio and show details such as HDAUDIO\FUNC_01 & VEN_1106 & DEV_1708 & SUBSYS_15580663 & REV_1007\5 & 2F010DBF & 0 & 0001

  There is a yellow question mark against this material on other devices, Device Manager. The properties indicates it is present, but no drivers were installed with Code 28. Using the results of option to reinstall the drivers in thwe Wizard saying that it cannot install this hardware because the required software is not found by the wizrad!

  I tried some drivers, such as those from Realtek, but with no result.

  Any suggestion please?

  (Note that it worked on Vista professional but which had to be replaced due to graphics card conflicts, solved with XP Pro).

  No version of Windows already had a set of drivers included. There is too much material 'out there' for Microsoft to consider being completely comprehensive installation. In any case what are Microsoft doing about / hardware technology which is backdated by the version of Windows that uses any given individual?

  Out of curiosity, what is the manufacturer of your PC? I've never heard of which did not provide for drivers.

  If they do not respond to emails, http://www.pcidatabase.com/ can be useful. Your ID Fri and dev are respectively of 1106 to 1708. Use the drivers found in this way at your own risk. Set a restore point before installation. Don't let you be guided to use any driver 'detective '. If you use Windows Update.

  As I pointed out, you may be missing other drivers too such as (but not limited to) chipset and LAN.

  Tricky

• Received message that my copy of WIndows is not activated. How can I activate pre-installed software?

  I have XP Pro Version 2002; Service Pack 3.  This software came pre-loaded on my Dell and I used the same computer and software for several years.  I don't have a product key code.  Why is this activation is requested for the moment?  What can I do about it?

  Hi Wyatt33,

  It would be if you changed or added hardware and this pushed Windows XP become out of tolerance.

  You will need to reactivate the copy of Windows XP.

  How to activate Windows XP

  http://support.Microsoft.com/kb/307890

  For more assistance, contact the Microsoft Activation Center.

  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx

• setting up e4200 with wet610n

  I'm moving into a new House.  I bought the E4200 and the WET610N so I can connect between the main house and the carriage house which will be my office.  Carriage House is 60' away from the main house.  I want to place the E4200 in the main house and it will send the signal from cable broadband cable modem.  I'm ethernet cables directly since the E4200 to the DirecTV DVR and will use another outlet to distribute to other computers in the main house through ethernet switch.  I'll place the WET610N in the carriage house and throw out of the WET610N wired ethernet switches it for access to broadband from home.  Will this work?

  Thanks for your comments.

  Then, I'd take a peek at MOCA (Multimedia over coaxial cable).  It seems perfect for you.  You have an adapter to your cable modem that connects to your router and an adapter that connect you to the coaxial cable in the carriage house.  Then the output of this card (in the carriage house) can go in a switch or access point, etc. for multiple uses in your carriage house.  I use this in my house for video streaming between my cable modem and the Roku box in the House and also use it in a room that has a coax, Ethernet plug in this room.  The cable connections are pleasant and reliable.

  Ones I have are Netgear, but there are different manufacturers of MOCA material out there.  When I bought just recently, Netgear adapters were $100 / pair, which was ideal to make a cable connection where I needed.  And they play well with the E4200 I have as well.