MAX CAN identify the third part DAQ modules?

Similar Questions

• How can identify the real space in my SGPT123 Tablet?

  Hello

  How can identify the real space in my Xperia Tablet? I can see only 10.0 GB, if suppose has 16 GB, where's the rest?

  A space is medical, the Android operating system and recovery Partition.

• Is there an API that returns the model number or any other identifier for a module installed, I can use to identify the characteristics of this module?

  For example, I'll call you

  DaqSystem.Local.GetPhysicalChannels (PhysicalChannelTypes.AI, PhysicalChannelAccess.External)

  For a list of connected devices.  The data in the table back looks like this:

  cDAQ1Mod4/ai0 (etc.)

  It tells me that I have a CompactDAQ chassis, which is good, and an analog module in the slot Module4.  What I need to know is not just that there is an analog module in the slot to #4, but also of its ability (voltage, temperature, voltage, etc.) so that I can use the correct DAQmx task for this type of module.  All this has to be discovered during execution.

  Otherwise, I'll have to provide a configuration utility when the user program needs to determine which module is plugged that slot - and will it change by moving it to another location, you must enter these details again.  I want to avoid this by making the material more discoverable as possible.

  I can remember an API - and that is my hope.

  * beep *.

  Hello

  I could understand the syntax for you. It's here.

  Device blah = DaqSystem.Local.LoadDevice ("cDAQ1");
  foreach (String dev in bla. ChassisModuleDeviceNames)
  {
  Label1. Text += "\n" + DaqSystem.Local.LoadDevice (dev). ProductType;
  }

  This displays the model number of all modules of the cDAQ in the chassi. I hope this helps.

  Kind regards

  Perry S.

• How can I prevent third parties not authorized to launch from my browser?

  With all the concern for safety, I can't understand why a third-party program can just open my browser without permission or warning and load any page please. I install a new program or update an old and it opens a thank you page or the implementation. I uninstall a program and it opens an investigation into the reasons for leave. I click on a button in a memory intensive game and Firefox to suck the rest of my RAM and cause a malfunction.
  At least with the combination of Mozilla and my anti-virus protections I worry too much taken to a malicious site or other evil applications of this vulnerability, but it's annoying. The decision to open Firefox (or any program) should not be mine alone?

  OGRastamon wrote:

  I don't understand. If a web browser can't know from whence an application is launched then how could another program.
  

  If your firewall or other security software has this feature, you can configure the rules to deal with that. For example, by default, you can prevent external applications to launch web browsers. You could then define rules for specific applications to allow them to launch web browsers. This way you can always click on links in an email client and open them in a browser, for example.

  OGRastamon wrote:

  Did you mean that Firefox does not currently detect this? That it is not possible to implement?
  

  As far as I know, no navigation software only allows you to ignore links launched by external applications. You can request this feature by submitting a bug enhacement, so relevant report does not already exist.

  • https://developer.Mozilla.org/docs/Mozilla/QA/Bug_writing_guidelines

  OGRastamon wrote:

  If by my "computer's application page" you mean "set program access and computer defaults" then no, it does not work. The only options are any of your installed browsers or your current browser.
  

  You could break the association for HTTP and HTTPS protocols in the registry, but I do not recommend.

  HKEY_CURRENT_USER\Software\Microsoft\Windows\Shell\Associations\UrlAssociations\http\UserChoice
  HKEY_CURRENT_USER\Software\Microsoft\Windows\Shell\Associations\UrlAssociations\https\UserChoice
  

• HP color LaserJet 2550 PCL 6: If anyone can identify the problem of these prints?

  When I print, I get areas white, spots, lines, etc...

  If I print & printing becomes better & better until after 5-10 prints, it's perfect.

  I can print a few pages, then it will begin to fail again... but not as bad as when spends a lot of time and then try to print.

  I typically re - calibrate before printing, but I can't be sure if that is actually help.

  Here the 6 test pages, in order from the top left to bottom-right. It took 6 pages to get a good page.

  All the "ink" is full and there is no error msgs.

  Can someone identify the problem of these prints?   What piece of hardware is a failure.

  http://www.demonsdisks.com/pics/temp/HP-test-pages.jpg

  Thank you very much

  Your backup drum is bad.  Because the lines are now gone which confirms the first keg was bad and the new defect is caused by the backup.

• Help me identify the t61p, part of the MYSTERY - shield MDC support

  I'm puzzled.

  Part is missing my t61p. The IBM Norway are not able to find a part number.

  In the HWMM (HardWare Maintenance Manual FRU 42X3546_3), to remove and replace a FRU, page 72, chapter 1070 Modem daughter card - we have a nice picture of the part in question.

  It is the metal shield that is removed as "step 2".

  This shield should also support the keyboard on my laptop I have a mess around 'e' and 'r' which makes noise and gives the place.

  Can someone help me get this part ordrered? Someone out there who has this part floating around?

  I tried to buy this 3 months - no luck, no part number, not a deal.

  If I look in the parts list , I noticed, that the shield he part 'e' as mentioned andyP.

  in the "'various SPARE PARTS" you will find the "e" part at the bottom of the page: "

  Shield WAN wireless Kit
  Table of contents: (e) support for the MDC, Verizon EMI Shield (e) support for the MDC, Vodafone/Cingular EMI Shield Cushion sheet Nucleus of ferrite for speaker	42 X 4332		R

  The 'f' stand holds the heatsink to the CPU from the low side of the system board.

• Support of the shared Variables in the third part XP embedded based of PTC?

  I sent a request in an embedded XP touch function (third party). The application works very well, but hosted on a RT (sbRIO Board) shared variables are not getting updated in the app on PTC

  1. the PTC is part of the project as a Windows XP Embedded Touch Panel

  2 NI TPC Service has been installed on the PTC and the application can be deployed remotely from the PC development via ethernet. (Where network connections and communications are OK)

  3. using distributed in the development computer systems manager, I can see that the shared variables are getting updates on the network

  I think that the problem can be solved if the following programs are installed on the TPC

  A. Support for variables that are shared for XPembedded

  B. shared Variable engine

  I tried to install the support of variables shared Program Files > National Instruments > Labview 8.6 > PDA > utilities > Variables > x 86 - but I get an installation error "cannot find the application for the Pocket PC applications Manager.

  Shared variable engine was installed from the ve220 folder. The program is installing. But the engine Variable is not start Control Panel > administrative tools > Services, Xpe, the service is stopped and cannot be started. When I try to start the service, I get the following error on PTC

  "Cannot start Service engine of National Instruments Variable on the local computer."

  Error 1053. Service has failed to demand launch or timely control.

  Please suggest solutions to the addresses above or another of the following:

  1. support of variables shared for XP built-in PTC

  2 Installer engine Variable shared.

  Thank you

  Krish

  Problem solved!

  Update for interested people working on XP Embedded PTC

  Just to ensure that shared Variables were indeed accessible to the TPC, I wanted to install Distributed Systems Manager 8.6 on the TPC. However given that the TPC was only 1 GB of DOM (disk on memory) and with all the software that I had tried, there remained only a few megabytes on the system. I had to add an another DOM of 2 GB.

  All products in the Installation went well, with the exception of the Logos NOR (Version 5.0). Logos OR installation has failed repeatedly.  I tried to install NI Logos separately, with the same results. Then I had this intuition that NI Logos had anything to do with the question.

  Then, I downloaded the new version of NI DSM 2009 SP1. Even if it were to settle on any fresh system without Labview, the installation would not proceed beyond the stage of configuration. I tried to install NI Logos of the folder on the download of new products separately and it worked magically!

  Once the new Logos (Ver 5.5) installed, the Shared Variable engine starts automatically and the shared Variables are finally unleashed - free stand up and shine! I thank Almighty God!

  On the lighter side, come to think of it - to run an application about 400 KB, we need NEITHER of Run Time, XP embedded, DSM, Logos...  (around 900 MB). Can make us everything simpler?  Invite your comments...

  Thank you

  Krish

• Lost the cover of the laptop drive - help me to identify the spare part?

  Hey guys,.

  I need to buy a replacement part for the cover of my laptop hard drive.

  Question 1: what is this part?

  Question 2: Where can I buy the part?

  Image of the missing piece! http://img194.imageshack.us/img194/5578/brokencase1.jpg

  Thank you

  Elusefelier

  Should be on the list nr.17: FRU 43Y9743

  http://www-307.IBM.com/PC/support/site.WSS/MIGR-71037.html#17

  Buyable here: $15 and in stock

  http://www-304.IBM.com/shop/Americas/webapp/WCS/stores/servlet/default/PromotionDisplay?promoName=PA...

• Call method or the third part of the application in the Notification bar.

  Hi all!

  I wonder if it's possible to start a third-party application, or call a method in an application in the notification bar if it has an icon shown here?

  My app puts an icon there, without a message and I need to click on it to launch a different application or to call a certain function in my application (which runs in the background).

  I did a lot of research and seem to get that he cannot be but no evidence tangible that it cannot be done. I must add an Inbox and the listener and start an application of third party like this, when a user clicks on a message?

  Thank you.

  You can use
  http://www.BlackBerry.com/developers/docs/7.1.0api/NET/rim/device/API/system/ApplicationManager.html
  to launch other applications.
  to call your own application, I would suggest sending a global event (using the same class)

• Satellite Pro L20 - I can identify the right recovery disk?

  Hi all

  I wonder if there is a way to identify what recovery CD or DVD came with a particular laptop model?

  I have a number of Toshiba laptops and it is that recently that I started to write a note that's CD/DVD with a machine.
  for example
  GMR400788EN0 goes with Satellite Pro A200 PSAE4E-03U017EN

  I'm trying to figure out which CD is going with a Satellite Pro L20, PSL25E-00800CEN

  Thank you
  Ian

  Hello

  Sorry, but I think that there is no way to identify which CD belongs to what laptop.
  If your laptop comes with the recovery disk it should be a CD label or so on it.

  Anyway, it shouldn't be a problem, and you should test if it s the right recovery disk.
  Or you have so many Toshiba laptops? ;)

• The third part of"Windows Media Player" in the App Store allow for DVD playback?

  I know RT of Windows cannot read CD or DVD because there are no programs that recognize the types of media. However, in the app store, I saw third-party 'Windows Media Player'. Those who allow for playback of DVD or CD on windows RT or those only for complete Windows 8?

  See
  http://answers.Microsoft.com/en-us/surface/Forum/surfwinrt-surfdevice/surface-Windows-RT-with-external-DVD-player/18f225d5-fd9c-4eb1-aad7-62ab16908bf5?msgId=010125fc-e3e1-4345-91e7-e6deba23d219
   
   
   
  Barb
   
   
  http://digitalmediaphile.com/
   
  Application Windows 8 Blog Reader of Barb connected world - http://apps.microsoft.com/windows/en-us/app/barbs-connected-world-blog/02f35769-52bf-461c-b1d5-06e54a58d298
   
  Please mark as answer if that answers your question
   
   
   
   

• With the third part hosting how to view statistics?

  If I am hosting to a third party with muse of Adobe. How can I check my static account and view like I did in Adobe Business Catlyst?

  You must use Google Analytics.

• I would like to know how to create a text at the bottom of a cirle logo using the ellipse tool (as in attached photo).  I can create the upper part ("Alambama") but as the background, 'Crimson Tide').

  

  There are plenty of tutorials online. And here's one:

  Photoshop text on a circular path - YouTube

• How can I use the excpeption address in widows debugging to identify the cause?

  Hello

  I have a windows xp machine crashes randomly.

  I did a debug and wonder how I can identify the driver that is the cause using the exception address.

  Dump below:

  Microsoft (R) debugging Version of Windows 6.12.0002.633 X 86
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [E:\Mini072911-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol search path is: SRV * c:\debug-symboles * http://msdl.microsoft.com/download/symbols
  Executable search path is:
  Windows XP Kernel Version 2600 (Service Pack 3) MP (2 processors) free x 86 compatible
  Product: WinNt, suite: TerminalServer SingleUserTS
  By: 2600.xpsp_sp3_gdr.101209 - 1647
  Computer name:
  Kernel base = 0x804d7000 PsLoadedModuleList = 0x8055d720
  The debugging session: 21:08:37.390 Thu Jul 28 2011 (UTC + 01:00)
  System Uptime: 1 day 11:05:14.187
  Loading the kernel symbols
  ...............................................................
  ................................................................
  .................................................
  Loading user symbols
  Loading unloaded module list
  ..................................................
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck 1000007E, {c0000005, 874551ad, ba557b04, ba557800}

  Probably caused by: ntkrpamp.exe (nt! KiSwapContext + 2f)

  Follow-up: MachineOwner
  ---------

  1: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
  It is a very common bugcheck.  Usually the PIN address of exception
  the driver/function that caused the problem.  Always note this address
  and the date of the picture link / driver that contains this address.
  Some common problems are the exception code 0 x 80000003.  This means a hard
  coded breakpoint or assertion was hit, but this system has been started
  / /NODEBUG.  It is not supposed to happen as developers should never have
  breakpoints coded hard in retail code, but...
  In this case, make sure a debugger must be connected and the
  system startup/DEBUG.  This will we will see why this breakpoint is
  happening.
  Arguments:
  Arg1: c0000005, the unhandled exception code
  Arg2: 874551ad, the address that the exception occurred at
  Arg3: ba557b04, address of Exception report
  Arg4: ba557800, address of the context record

  Debugging information:
  ------------------

  EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - the instruction at "0 x % lx 08" referenced memory at "0 x % 08 lx. The memory could not be '%s '.

  FAULTING_IP:
  + 2f
  874551ad f3a4 MOV byte ptr rep are: [edi], byte ptr [esi]

  EXCEPTION_RECORD: ba557b04-(.exr 0xffffffffba557b04)
  ExceptionAddress: 874551ad
  ExceptionCode: c0000005 (access violation)
  ExceptionFlags: 00000000
  NumberParameters: 2
  Parameter [0]: 00000001
  Parameter [1]: 01000000
  Try to write at the address 01000000

  CONTEXT: ba557800-(.cxr 0xffffffffba557800)
  EAX = 00000000 ebx = 875677d ecx 8 = 00000200 edx = 00000000 esi = 8745bb80 edi = 01000000
  EIP = 874551ad esp = ba557bcc ebp = ba557bd4 iopl = 0 nv up ei pl nz na po nc
  CS = 0008 ss = 0010 ds = 0023're = 0023 fs = 0030 gs = 0000 efl = 00010202
  874551ad f3a4 MOV byte ptr rep are: [edi], byte ptr [esi]
  Reset the default scope

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: DRIVER_FAULT

  Nom_processus: System

  Error_code: (NTSTATUS) 0xc0000005 - the instruction at "0 x % lx 08" referenced memory at "0 x % 08 lx. The memory could not be '%s '.

  EXCEPTION_PARAMETER1: 00000001

  EXCEPTION_PARAMETER2: 01000000

  WRITE_ADDRESS: 01000000

  FOLLOWUP_IP:
  NT! KiSwapContext + 2f
  80545a1b 8b2c24 mov ebp, dword ptr [esp]

  FAILED_INSTRUCTION_ADDRESS:
  + 2de2faf01dadfc0
  874551ad f3a4 MOV byte ptr rep are: [edi], byte ptr [esi]

  BUGCHECK_STR: 0X7E

  EXCEPTION_DOESNOT_MATCH_CODE: This indicates a hardware error.
  Instruction to 874551ad does not read/write in 01000000

  LAST_CONTROL_TRANSFER: from 87456682 to 874551ad

  STACK_TEXT:
  WARNING: Frame IP not in any known module. Sequence of images may be wrong.
  ba557bd4 87456682 01000000 00000000 00000010 0x874551ad
  ba557c00 804ef19f 8ad2dd98 87567768 8ad2dd98 0 x 87456682
  ba557c30 80545a1b ba557c88 00000000 00000000 nt! IopfCallDriver + 0 x 31
  ba557c34 ba557c88 00000000 00000000 00000000 nt! KiSwapContext + 0x2f
  00000000 00000000 00000000 00000000 00000000 0xba557c88

  SYMBOL_STACK_INDEX: 3

  SYMBOL_NAME: nt! KiSwapContext + 2f

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: nt

  Nom_image: ntkrpamp.exe

  DEBUG_FLR_IMAGE_TIMESTAMP: 4d00d46f

  STACK_COMMAND: .cxr 0xffffffffba557800; Ko

  FAILURE_BUCKET_ID: 0x7E_CODE_ADDRESS_MISMATCH_BAD_IP_nt! KiSwapContext + 2f

  BUCKET_ID: 0x7E_CODE_ADDRESS_MISMATCH_BAD_IP_nt! KiSwapContext + 2f

  Follow-up: MachineOwner

  See you soon

  KeV

  Hi Kev,

  The issue of Windows XP, you have posted is related to Windows XP in a domain environment. It is better suited for the IT Pro TechNet public. Please ask your question in the TechNet forums for assistance.

  Hope the helps of information.

• Purchased video files can be downloaded from the third-party server

  I want to build an aerial video image bank. The files will be 4 k files pulled a multicopter. I have 500 video files. Each file can be 5-6G in size. I can't store these files in British Colombia because the limit is only 250 MB per file. Therefore, I need to store them on a third party server. When a visitor to the site buys a video file with the shopping cart on the spot (via PayPal), I want to know if my Muse built site can join the video file on the third parter server and call to put at the disposal of the customer to download the purchase email confirmation.

  I used these guys for years:

  Sell downloads | PayLoadz

  It costs a little a month but if you want something, turnkey for the size of the file that you are talking about. The downside is that the payment is not integrated with BC or CRM etc., it should be on the payloadz site (unless you start getting fancy with the two APIs, but that's another debate).