Maximum frequency in resource monitor

Similar Questions

• Serious problem with CPU 'maximum frequency.

  Hello

  I have a problem with my W510.

  I think that this problem has been around since I bought it, or at least for a month or two after I bought it.

  When I plug the power in, or out, it almost always affects maximum frequency of the processor, as seen in the Windows 7 resource monitor, as well as a program called CPU - Z which shows in fact the current speed of the base.

  When things work correctly, the basic speed is slightly more than 3,000 Mhz.

  However, this speed changes whenever I plug the power inside or outside.

  Usually, it changes for the worse when I plug IN power!

  Often, to plug in, the speed drops to about 1 000 Mhz. Then I Plug - and the speed goes back to 3 000 Mhz. Rebranchez_ the - 2 500 Mhz. out Plug - rest on 2 500 Mhz. Plug in French - 1 500 Mhz. out Plug - 2 500 Mhz. Plug in French - 3 000 Mhz. get out - 3,000 Mhz, etc.. Every once in a while, it even drops to 300 Mhz.

  It seems to be arbitrary and random. Sometimes, it takes me 10, 15 and even 20 times connect the power out and back in to run to 3,000 Mhz.

  The machine is new, there is no fan noise, and anyway, the changes are directly correlated to plug and power in and out and that they never occur themselves - is certainly not overheating or something like that.

  Also, I don't think it's a problem with the power itself, as happens to me in different countries and different places, and in any place if I try to re - plug power enough times - it will eventually be resolved (so of course that there is enough power).

  Is there someone who knows this problem? Any suggestions?

  Thank you

  I found that Throttlestop help me with my own problem speedstep. Speed moves much to light use because of speedstep, but when I use a cpu benchmark to load four hearts they set to max speed and do not move. You can give it a try.

  Kind regards

  Fernando

• CPU Maximum frequency never exceeds 31%, even under load.

  Windows 7 x 64 runing. Brand new X 220, less than 24 hours old. All windows updates have been applied, etc.

  Power settings Windows resource monitor reports that the maximum frequency of the processor is 31%, regardless. I plugged on current alternative and have set the profile for maximum performance. I am running Prime95 on all four cores. No effect.

  CPU - ID confirms it, the speed of the CPU to ~ 790 Mhz whatever the load on the CPU of the declaration.

  I searched google and the forums and found a thread on the R/L series forum where people have had the cpu, the opposite problem was always running at max frequency: here it seems that their cause was raised by staff. It worries me...

  Looks like speedstep does not work in win7x64

  Is it just a display issue or is the CPU without limitation correctly?

  Thanks for any help.

  SOLVED

  The adapter using my old thinkpad 90W CA solves the problem. The simultaneous use of the dough and the 60W also solves.

  Apparently, my initial forum search wasn't very good, I found a close a few pages on the forums theme that connects to a long debate which essentially suggested these two things.

  Thanks, sorry for the pointless post.

• When Firefox is running, IP addresses much appear in the resource monitor to the Win7 taskbar including 93.184.215.73 - that could be malicious. How can I block it?

  I noticed a slowdown sometimes in Firefox - checked the Windows 7 Task Manager resource monitor and found a lot of IP addresses - if open only one window of Firefox. So I checked their - most looks legit, but this one certainly has a bad reputation of computer forums: 93.184.215.73. What I want to know is one) how he block in Firefox? It is easy in Internet Explorer. You block just under the protection of personal information and security tabs. (b) why Firefox even running this?
  Thank you.
  M in Oakland

  Moreover, all that promises a free video download or conversion is potentially suspect in my book. As another experiment, you can disable these extensions for a day and see how that affects your traffic. You can do this on the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then, when in doubt, turn off.

  Often, a link will appear above at least an extension disabled to restart Firefox. You can complete your work on the tab and click one of the links in the last step.

  Note the differences?

• Maximum frequency of RAM to Satellite C650-1CC

  Hello

  I want to buy RAMs again, but I know Don t, how is the maximum frequency, which can use my cell phone. If he isn´t no need to buy a RAM with frequency with 1600 MHz for example.
  Now there's the Rams with 1066 MHz frequency.

  Thanks for the reply

  Satellite C650-1CC (PSC08E-03H006CZ)

  According to specification for laptop, your laptop can be upgraded up to 4 GB. For the moment, there must be 3 GB inside and one of the modules is 2 GB. Only thing you can do is to get the same second RAM and use 2 x 2 GB. It must be DDR3 1066 MHz (PC3-8500).

  You must use the identical two Rams and you will have only a few compatibility problems.

• [PX6 - 300 D] Resource monitor - "access is denied. You must be a user admin to access this application. »

  Hello

  I get this error message when I try to open the monitor of resourse

  "Access is denied. You must be a user admin to access this application. »

  I use the admin account. Where could be the problem?

  Thank you very much in advance.

  Hello Steven,

  Thank you for your support. The problem has been resolved by reinstalling the software. It seems that the new version of the software is out - strange here was that my request for resource monitor appeared also to update in the update software tab.

  Thanks again.

• the Task Manager displays only the CPU resource monitor

  Using Ctrl-Alt-Del to bring up the Task Manager appears a little CPU resource monitor.

  .

  Can I fix without reinstalling Windows? Or should I just wait for Windows 8?

  Hello. Try to double-click the gray area (frame) in the resource monitor. Who could return to the version complete.

• Resource Monitor says that my drive is at 100% of the time active

  According to the resource monitor to my HP Vista desktop HD often goes to 100% of the active time. When this happens, my computer of grain to a halt.  I got open and seen this resource monitor.  I searched on the net and I see that a lot of people have this problem but I didn't see all of the possible solutions. One answer was that it was a problem of page fault and that I needed to change the size of Word, I did and it did not help.  Anyone have any ideas?

  Thank you, Ralph

  It is no longer a problem.  I reinstalled the operating system and now all is well

• Insufficient memory errors foul hard in resource monitor

  I have a HP laptop HP G50 with 3 GB 133US memory. Bought with VISTA and Norton 360. After that automatic update to Service Pack 2 start time was about 10 minutes. Try to run something as simple as WORD has been slow and capricious. Looking for problems of slow start I opened the Task Manager to see which application may be the cause of the problem. Seem to be the svchost (from memory here), I chose the performance monitor, and then control of the selected resource. I was surprised to see several thousand hard faults of memory that programs memory access.
  I went to support HP online and got the usual stuff in response to "slow start", I removed everything from the start to the top of the list except the files from Microsoft. Ran disk defrag (Ihave about 178 GB free). The system started in a few minutes. Improved, but when I look at the resource monitor memory hard fouls are still there. I started to NORTON 360 and once again the fly of the hard disk and resource monitor showed errors of memory. I'm guessing that NORTON 360 scans all files for virsus.
  I am currently running without NORTON 360. I watched MICROSOFt Defender and he made scans at a time desired (no good on a system that is not 24 X 7) but I don't see that I could choose Start Up or Power Time.

  Are these true hard memory of flaws? Is this just an invalid display by Microsoft? I found the FL diagnosis on the disk. He was back in August when I bought the system. This newspaper also showed the flaws of memory. Have therefore always been there.

  No reason to believe that memory is really bad, because everything does not work.

  Someone at - it experience with Resource Monitor hard memory defects?

  Test the memory. I think Vista is a memory Tester, but I like Memtest86 + www.memtest.org . Of course, you must obtain the program from a working machine. You will download the .iso image file to create a bootable cd. You will need a third-party burning software such as free ImgBurn , Nero or Roxio. Burn as an image, not in the form of data. Then start with the media that you did (you may need to change the boot priority in your BIOS so that the optical drive is the first boot device). The test runs immediately. The test run for an hour or two--at least that errors are seen immediately. If you get any errors, replace the RAM. MS - MVP - Elephant Boy computers - don't panic!

• Resource monitor blackBerry Smartphones Application

  I have a BB 9810 Torch.  I just got a notice at the top of my screen with a link to the resource monitor Application.  The notice was not a text and was not an email.  I don't know what it was, but it does not open, and the only way I could get rid of it was to reboot.

  Is it a BB publicity stunt, or what?

  Rolyb

  "Stunt" was a bad choice of words on my part.  Rather, I wanted to say something more in the sense of an advertising offer, which I think it was.  You who pointed out as a possibility.

  My first sign of notice has been the opinion of little yellow envelope with the red star icon in the Ribbon at the top of the home screen which means the arrival of one or more new statements (email, calendar, etc.).  Clicking on it shows all messages that have not been opened.  It was the view of Application resource monitor.  It was just a separate title which does not, or delete.

  When I checked my email inbox, there's nothing in it, nor was there any indication of an SMS message, anywhere.

  So I restarted and everythng lightened (and has not returned).

  I think your suggestion of an offer of advertising is what it was, but a strange one that has not worked very well.

  Rolyb

• Windows resource monitor shows only a CPU core when he should have four.

  Windows 7 Home Premium 64-bit, SP1
  Intel Core i3 2330 m-hyperthreading

  Resource monitor normally indicates two nuclei and Hyperthreaded (a total of four graphs) when seen on the tab CPU recently single core (one graph) is displayed. This change is caused by one of the updates of Windows or an indicator of a hardware problem? Is there a recommended KB or a patch that solves it?

  original title: change of resource monitor (?)

  You asked: "what version of Windows 7 do you have?" ... Home Premium x 64, SP1 as indicated at the beginning of my first post.

  As my screen name, incurably curious, says I couldn't let it go. Assistance in the meantime, I searched tirelessly and found a cure. I had to make a change through msconfig. I don't have any idea how the settings have been changed because no one else is using this machine.  [????] (Microsoft Security Essentials and Malwarebytes returns own scans; so I doubt that the cause is associated malware.) The following explains what I've done and the results.

  1. I went into msconfig > startup > advanced options and find the number of processors, set one. The arrow to expand a menu drop-down has also shown that a single processor. Which did not make sense because my processor Intel Core i3 2330 M's two core with hyperthreading.
  2. I unchecked the box and restart the computer.
  3. I returned the number of processors as described in #1 above. Expand the menu gave me the choice of 1, 2, 3 or 4 processors. I chose two and checked the box.
  4. I rebooted the computer again.
  5. I checked the monitor of resources (via the Task Manager) and found multiple graphics, I'm used to the display. The graphics are labeled: Service use of the CPU, CPU 0, 1 parked CPU 2 CPU and CPU3 parked.
  6. Parked CPU1 and CPU3 parked show no activity, which is expected. These show only activity when hyperthreading is active, which is rare with the programs I run. Only programs written specifically to hyperthreading use the feature.
  7. CPU utilization service CPU2 and CPU0 show activity as expected.
  8. Manager tasks shows four graphs still now.

  The reason why I know not what to expect is that I have upgraded RAM and completed cooling there are a few months and one of my tools use resource monitor to control the computer. (I used other means to monitor the internal temperature). I managed to run enough programs to use more than 7 GB, the 8 GB available RAM and CPU usage Dungeon in the range of 75 to 100% for more than an hour during trials. Hyperthreading (CPU1 and CPU3) clearly indicated to be active too. Time CPU ran in the range 165F without additional cooling and order of 125-130 with additional cooling.

  I will wait for return of the answers with explanations and/or questions until I got this mark as resolved.

• sfc/scannow CBS. Corruption, resource monitor error LOG does not, the Preview picture broken, KB2538223 do not install, optional updates IE 10 and 11 unsuccessful.

  I just fixed a major problem I had with a screensaver HBO hogging all my resources. I had to reboot and when it would take place within 2 hours. Now, after cleaning and tweaking, this installation is only a few weeks and I am having some problems.

  1 CBS.log has some corrupted files after doing a sfc/scannow.

  2 resource Monitor works properly and will not load properly not display anything without error message.

  3 image preview does not work on my photos for the thumbnails and will crash after the use of native Photo Viewer after about 5 pictures in the same directory leafing.

  4. Windows Update will not be installed "Security Update for Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package (KB2538243).

  5. then Windows Explorer 10 and 11 will not be installed and the optional updates that tend to bother me even though I know that I don't need them. But also say that they have failed after that reboot although says that she is successful in the history of Windows Update.

  MOD, do not hesitate to break up of my questions on the correct forums, I want to be like Windows stock as possbile.

  Hello

  Follow this link http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/resource-monitor-not-working/5b471988-ead8-47c7-9078-45ac3aa0c981

  At latest

• Resource monitor shows Windows 7 and Windows Vista running different programs

  I followed my programs and other at quite a bit lately since my system hangs and is running more slowly.  I'm trying to understand what might be causing this. I only had Windows 7 loaded on this desktop computer, as I bought it.  However, today I noticed that in the resource monitor to the title of the CPU that Windows 7 is the context of the operating system for some programs and Windows Vista is the context of operating system for other programs (including programs based Apple).  Is this a problem? Could it be added to some of my slowness and crashes?

  This indicates the operating system, the program has been designed to target. If the application does not specify this in its manifesto, it is assigned to a context of Vista. This has been added in Windows 7 that allows new applications to benefit from new features, while older applications continue to work on the former.

  http://social.technet.Microsoft.com/forums/Windows/en-us/cc0740eb-B06A-41a6-98e6-088529bf1f10/what-does-operating-system-context-mean?Forum=w8itprogeneral

  http://msdn.Microsoft.com/en-us/library/Windows/desktop/dd371711.aspx

• Lost in the information resource monitor

  Original title: resource monitor > disk > storage... lost information

  Resource monitor > disk > storage

  does not display an information (storage only)

  But other works correctly

  My OS Windows 7 64 Ultimate

  Western Digital 1 TB hard drive

  Edit: wrong size of the disk

  For anyone having the same problem, I was able to solve my problem as follows:

  1. I noticed 3011 event ID source Microsoft-Windows-LoadPerf
  2. Following the solution a link http://technet.microsoft.com/en-us/library/dd363642%28WS.10%29.aspx I did a reconstruction of the performance counters as follows:

     To rebuild the list of counters in the registry:
     1. click on start, expand all programs, then accessories.
     2 right click on prompt and then click Run as administrator.
     3. at the command prompt, type lodctr /r and press ENTER.

  This solves the problem, disks now appear normally.

  Beat

• THE TASK MANAGER AND RESOURCE MONITOR

  WHEN I OPEN THE TASK UNDER PERFORMANCE MANAGER AND PRESS RESOURCE MONITOR DOES NOT OPEN

  Hello

  You are welcome.
  Let us know if face you any problems with Windows in the future.