Maximum of function

Similar Questions

• Security roles and workflow management groups

  People,

  There is a section on Workflow management groups and security roles in vCloud Request Manager Installation and Configuration Guide - Guide of Directors Chapter 5 and 6. I have difficulty working on the relationship between the two settings.

  My first question is around the goal of the WM default checkbox that the specific guide is used to set the default user workflow management group.

  What would a never used default WM? I mean, what would he ever substitute the other workflow management groups that you define.

  In addition, in the guide, it say cloud Blueprint Admin and Asset Manager security role is a combination of the Admin of Blueprint of cloud and the Asset Manager. Is cloud Blueprint Admin & Asset Manager being the two groups of workflow management, reasonable to assume that a security role is composed of workflow management groups?

  And when I select agent, I do not see a cloud Blueprint Admin and Asset Manager security role listed?

  Finally, is there a way to determine the exact permissions that contains a workflow management group/security role?

  Thank you

  Cormac

  The Group Management (WM) default workflow is largely an artifact of vSM based vRM.

  VSM, a group of WM is a collection of agents used to apply security and route of tasks, among other responsibilities. (For the purpose of vRM, an agent can defined as users who have access to the vRM admin interface).

  vRM mainly use WM groups as a way to deliver relevant communications to users based on their responsibilities for example vCD Admins, Asset Managers etc. vRM does not require other functions related to WM groups.

  For functional reasons, vSM requires that each officer with access to the capabilities of WM belong at least a WM group. In addition, at least one of these groups must be designated the default WM for this officer group. These functional reasons are not immediately relevant to the specific use of vRM rest however case the constraint. Suffice to say for vRM, every WM user must have a WM group by default even if this information must never be used.

  Roles and groups are separate entities. A role defines a set of privileges to access a particular functional area of the admin interface for example a role WM sets permissions to interact with the workflow. of the roles of management (CM) configuration sets permissions to review and modify records in the repository of vRM.

  A special role of WM can be associated with one or more groups WM. When this WM role is assigned to a user, that user inherits groups associated with this role, WM allowing to simplify the administration of groups. An individual user can also have other WM assigned groups to them directly, complementary to those inherited from their role of WM.

  At an abstract level, vRM defines three types of users of the admin interface:

  1 vCD Admins

  2. plan Admins

  3. managers

  However, the security of MSM model requires that each individual user must be implemented with several components. By default, vRM sets a "Asset Managers" WM Group of what assets all managers must belong. However, WM groups cannot be used to give access to the features as well, so a separate from the "Asset Managers" WM role is obliged to grant access to these features asset managers. By default, the role of "Asset Manager" WM is associated with the "Asset Managers" group such that any user who is assigned the role automatically belongs to the Group also. There is also a separate 'Asset Managers' CM role that gives asset managers they need to the repository vRM for example the possibility to add new licenses for software products.

  This model of definitions is repeated for 3 personas above with a group and several roles defined for each. When an administrator assigns a user to one of these characters they should assign the groups and roles appropriate according to the documentation. They should not need to be concerned by the distinctions between each component.

  The role of the "Plan Director Admin and Asset Manager" reflects that a user may need to be asset manager and a Director of Blueprint. Because a user can have a role to the maximum by functional area, vRM provides a compound that provides two sets of permissions. However, a user can belong to several groups WM, so it is never necessary to provide a composite group.

  The role of composite is there; just maybe not where you expect to find. Blueprint Admins do not need to access WM, so there is not a 'Blueprint' Admin or a composite WM role. Blueprint Admins do need access to configuration management so it's an "Admin blueprint" and a role of CM composite.

  The details of the user screen provides:

  • a summary of all groups to which a user belongs

  • provides a 'Détails' button to drill down on each role assigned to the user to inspect the permissions granted by this particular role

  You must be a vCD Admin to see areas of the screen.

• Flex error 1034: has no Type constraint

  I spread the File as AudioFile class.  Only, I added a new property 'category.  I intend to filter the files to a directory structure and to keep the AudioFile objects in a simple indexed array.  I also want to add category information to the AudioFile property object 'category.  The error is thrown after that I called getDirectoryListing, assign the file objects returned to "content: table ', and then I iterate over 'content' assinging each object AudioFile file object.  I thought that the AudioFile is a file extension that is not a problem.  The heart of the issue is how getDirectoryListing returns objects file but I need AudioFile objects.  My next instinct is to override the getDirectoryListing method, but I can't find the class declaration for the file.

  Is it possible to throw objects as objects AudioFile file?  Should I use a different strategy for the assignment of the category for the objects in file info?  Maybe I shouldn't be the extension of class leader at all.  I'm a bit stuck.  Any help would be greatly appreciated.

  Here is my code.  Please note that this is my first flex/air/actionscript I've ever written.  I use Flash Builder 4.5 and my goal is to Office Air.  The AudioFile extended class is AudioFile.as.

  package
  {
  import flash.filesystem.File;

  public class AudioFile extends file
  {
  public void AudioFile()
  {
  }
  
  public var category: String;
  }
  }

  <? XML version = "1.0" encoding = "utf-8"? >
  " < = xmlns:fx s:WindowedApplication ' http://ns.Adobe.com/MXML/2009 "
  xmlns:s = "library://ns.adobe.com/flex/spark".
  xmlns:MX = "library://ns.adobe.com/flex/mx".
  xmlns:samples = "samples.*".
  applicationComplete = "init ()" width = "386" height = "581" "
  Initialize = "initData ()" >
  < s:layout >
  < s:VerticalLayout paddingTop = paddingLeft "6" = "6" paddingRight = paddingBottom "6" = "6" / >
  < / s:layout >

  < fx:Script >
  <! [CDATA]
  import AudioFile;
  
  import flash.events.Event;
  import flash.filesystem.File;
  
  Import mx.collections.ArrayCollection;
  Import mx.controls.Alert;
  
  private var audioObj:AudioFile = new AudioFile();
  
  protected function init (): void
  {
  Main window of app AIR Center on the screen
  nativeWindow.x = (Capabilities.screenResolutionX - nativeWindow.width) / 2;
  nativeWindow.y = (Capabilities.screenResolutionY - nativeWindow.height) / 2;
  Receive messages when minimize/maximize occurs
  addEventListener (NativeWindowDisplayStateEvent.DISPLAY_STATE_CHANGING, onDisplayStateChange);
  }
  Handles when the application is reduced to the minimum and maximum
  protected function onDisplayStateChange(e:NativeWindowDisplayStateEvent):void
  {
  trace ("display status changed from" + e.beforeDisplayState + "" + e.afterDisplayState);
  }
  
  private var masterList:ArrayCollection = new ArrayCollection();
  private var dgArray:Array = new Array();
  
  [Bindable]
  private var initDG:ArrayCollection;
  
  public function initData (): void {}
  var initDG:ArrayCollection = new ArrayCollection (dgArray);
  }
  
  private void parse (): void {}
  ActionScript file
  
  var sourceDir:AudioFile = getSourceDir();
  var fileList:Array = new Array();
  var dirList:Array = new Array();
  
  function transverseDirStructure(sourceDir:AudioFile):Array {}
  var flag: Boolean = false;
  var dirList:Array = new Array();
  var fileList:Array = new Array();
  
  {}
  var content: Array = sourceDir.getDirectoryListing ();
  
  for (var i: int = 0; i < contents.length; i ++) {}
  test for isDirectory
  var file:AudioFile = content [i];
  If (file.isDirectory == true) {}
  dirList.push (file);
  }
  else {}
  fileList.push (file);
  }
  }
  
  If (dirList.length == 0)
  flag = false;
  else {}
  recursion
  fileList = fileList.concat (transverseDirStructure (dirList, fileList));
  }
  } While (flag == false)
  
  Return to the file list;
  }
  
  function filterExtensions(fileList:Array):Array {}
  var cleanExtensionsList:Array = new Array();
  for each {(var i: AudioFile in the list of files)
  If (i.extension == ".wav" |) ".aiff") {}
  cleanExtensionsList.push (i);
  }
  }
  
  Return cleanExtensionsList;
  }
  
  function filterSize(fileList:Array):Array {}
  var cleanSizeList:Array = new Array();
  var maxFileSize:int = 350000;
  for each {(var i: AudioFile in the list of files)
  If (i.size < maxFileSize) {}
  cleanSizeList.push (i);
  }
  }
  
  Return cleanSizeList;
  }
  
  function categorizeAudioFiles(fileList:Array):Array {}
  var masterList:Array = new Array();
  
  var flag: Boolean = true;
  
  var category: Array = new Array();
  Categories.push ("Kick", "Snare", "Hat", "crash", "clap");
  
  for each {(var i: AudioFile in the list of files)
  for each {(var x: String sous catégories)}
  If (i.name.search (x) > 0) {}
  Add category name to the extended property.
  i.Category = x;
  masterList.push (i);
  }
  }
  }
  
  return masterList;
  }
  
  fileList = transverseDirStructure (fileList);
  fileList = filterSize (fileList);
  fileList = filterExtensions (fileList);
  fileList = categorizeAudioFiles (fileList);
  }
  
  private function generateRandom (): void {}
  
  }
  
  private function setDestination (): void {}
  var file:AudioFile = new AudioFile();
  file.addEventListener (Event.SELECT, dirSelected);
  file.browseForDirectory ("select a directory");
  function dirSelected(e:Event):void {}
  txtDestination.text = file.nativePath;
  }
  }
  
  private void getDestination (): {AudioFile
  var destinationDir:AudioFile = new AudioFile();
  txtDestination.text = destinationDir.nativePath;
  
  Return destinationDir;
  }
  
  private void getSourceDir (): {AudioFile
  var sourceDir:AudioFile = new AudioFile();
  sourceDir.nativePath = txtBrowse1.text;
  
  return sourceDir;
  }
  
  private function setSourceDir (): void {}
  var file:AudioFile = new AudioFile();
  file.addEventListener (Event.SELECT, dirSelected);
  file.browseForDirectory ("select a directory");
  function dirSelected(e:Event):void {}
  txtBrowse1.text = file.nativePath;
  }
  }
  
  Control logic
  
  []] >
  < / fx:Script >

  < mx:Form width = "373" height = "113" id = "formChooseDirectory1" >
  < mx:FormHeading label = "1. Width to choose a Source directory... "="315"fontSize ="13"fontFamily ="Verdana"color ="#CF71FF"/ >
  < s:Button Label = fontFamily 'Browse... '. "="Verdana"fontSize ="13"color ="#CF71FF"id ="btnBrowse1"enabled ="true"click ="setSourceDir ()"/ >
  < s:TextInput width = "333" id = "txtBrowse1" active = "false" text = "C:\Users\RokaMic\Bangin Beats" / >
  < / mx:Form >
  < mx:Form width = "373" height = "231" id = "formAnalyze" >
  < mx:FormHeading label = "2. FontFamily to analyze samples... "="Verdana"fontSize ="13"color =" #00D8FF "width ="245"/ >
  < s:Button label = "Analyze" fontFamily = "Verdana" color = "#00D8FF" id = "btnAnalyze" enabled = "true" click = "analyze ()" / >
  < mx:DataGrid editable = "false" enabled = "true" fontFamily = "Verdana" color = "#00D8FF" width = "337" dataProvider = "{initDG}" >
  < mx:columns >
  < mx:DataGridColumn headerText = "File name" dataField = "filename" color = "#00D8FF" fontFamily = "Verdana" / >
  < mx:DataGridColumn headerText = "Category" dataField = "category" color = "#00D8FF" fontFamily = "Verdana" / >
  < / mx:columns >
  < / mx:DataGrid >
  < / mx:Form >
  < mx:Form width = "374" height = "173" id = "formGenerate" >
  < s:Button label = "Generate Drum Kits" width = "342" height = "52" fontSize = "18" = "Verdana" color = fontFamily "#00FF06" id = "btnGenerate1" enabled = "true" click = "generateRandom ()" / >
  < mx:FormItem label fontFamily = "How much?" = "Verdana" fontSize = "13" color = "#00FF00" width = "340" >
  < s:HSlider width = stepSize '206' = value '1' = "1" minimum = "1" maximum = "25" id = "sliderHowMany" liveDragging = "true" / >
  < / mx:FormItem >
  < s:Button label = 'Destination '.... "color =" #00FF00 "id ="btnDestination"enabled ="true"click ="setDestination ()"/ >
  < s:TextInput width = "332" id = "txtDestination" enabled = "false" / >
  < / mx:Form >
  < / s:WindowedApplication >

  browsing a directory structure looks like you're going to go through everything in the directory.  If you encounter another directory (void), I thought you were going to go through everything in that directory (void) etc.  Thus, you might end up not being able to use a properly return statement.  I think that's not the problem, so you don't need to deal with this issue.

• Complete textfield with a greater value to an xml file

  Hi all, I have an actionscript by extracting data from an xml file. As you can see in the code below, I textFields have been created on the fly.

  I need to have the 'resultsField' textfield to be filled by programming with the largest value of 'column1' or 'column2 '.

  Thank you all for the great service!

  --------------------- XML  ------------------------

  <? XML version = "1.0" encoding = "utf-8"? >
  < cat >
  < title >
  USD
  < /title >
  < CAT >
  0.5879
  < / cat >
  < CAT >
  0.9875
  < / cat >
  < / cat >

  -ACTIONSCRIPT 2.0-

  this.createTextField("column1",25,0,50,200,30);
  this.createTextField("column2",25,325,50,200,30);
  this.createTextField("resultsField",20,0,105,200,30);

  Column1.html = true;
  Column2.html = true;
  resultsField.html = true;

  var my_xml = new XML();
  my_xml. OnLoad = {function (success)}

  If (success) {}
  RootNode = my_xml.firstChild;
  Column1.htmlText = RootNode.childNodes [1] .firstChild;
  Column2.htmlText = RootNode.childNodes [2] .firstChild;

  trace (column1. (Text);
  trace (column2. (Text);
  } else {}
  trace ("Buah!");
  }

  };
  my_xml.ignoreWhite = true;
  my_xml. Load ("quotes.xml");

  
  resultsField.htmlText = 'value here ';

  use:

  This.createTextField("hello_txt",0,10,10,100,20) ("column1", this.getNextHighestDepth (), 0,50,200, 30);
  This.createTextField("hello_txt",0,10,10,100,20) ("column2", this.getNextHighestDepth (), 325,50,200, 30);
  This.createTextField("hello_txt",0,10,10,100,20) ("column3", this.getNextHighestDepth (), 0,80,200, 30);
  This.createTextField("hello_txt",0,10,10,100,20) ("column4", this.getNextHighestDepth (), 325,80,200, 30);
  This.createTextField("hello_txt",0,10,10,100,20) ("resultsField", this.getNextHighestDepth (), 200,125,200, 30);

  Column1.html = true;
  Column2.html = true;
  Column3.html = true;
  column4.html = true;
  resultsField.html = true;

  var my_xml = new XML();
  my_xml. OnLoad = {function (success)}

  If (success) {}
  RootNode = my_xml.firstChild;
  Column1.htmlText = RootNode.childNodes [1] .firstChild;
  Column2.htmlText = RootNode.childNodes [2] .firstChild;
  Column3.htmlText = RootNode.childNodes [3] .firstChild;
  column4.htmlText = RootNode.childNodes [4] .firstChild;

  resultsField.htmlText = maxF ([Number (stripF (column1.text)), Number (stripF (column2.text)), number (stripF (column3.tex t)), Number (stripF (column4.text))]);

  trace (column1. (Text);
  trace (column2. (Text);
  } else {}
  trace ("Buah!");
  }

  };
  my_xml.ignoreWhite = true;
  my_xml. Load ("quotes.xml");

  function maxF(a:Array):Number {}
  Max: var number = [0];
  for (var i: Number = 1; i
  If (a [i] > max) {}
  Max = a [i];
  }
  }
  maximum return;
  }
  function stripF(s:String):String {}
  Return s.split("").join("").split("\n").join("").split("\r").join("");
  }

• Is this possible with function xdoxslt:maximum()?

  Hello
  
  I have an xml that contains data for different users like this-
  
  < row >
  < Employee_Full_Name > <! [CDATA [xxx]] > < / Employee_Full_Name >
  < OverallCompetency > <! [CDATA [3]] > < / OverallCompetency >
  < OverallPotential > <! [CDATA [2]] > < / OverallPotential >
  < OverallPerformance > <! [CDATA [3]] > < / OverallPerformance >
  < / row >
  < row >
  < Employee_Full_Name > <! [CDATA [yyy]] > < / Employee_Full_Name >
  < OverallCompetency > <! [CDATA [2]] > < / OverallCompetency >
  < OverallPotential > <! [CDATA [3]] > < / OverallPotential >
  < OverallPerformance > <! [CDATA [3]] > < / OverallPerformance >
  < / row >
  
  I have for employees of group based on their side of OverallPotential and OverallPerformance. I use the count function to find employees in different groups like this-
  
  <? County (. / / row [sysOverallPerformance = "3"] [sysOverallPotential = "3"] [sysOverallCompetency! = "] [sysOverallCompetency! = 'Uncategorized'])? >
  
  Now, I want to find the largest group of employees. By using the xdoxslt:maximum () function, I'm not able to compare these counts for different groups.
  
  <? xdoxslt:maximum (County (. / / row [sysOverallPerformance = "3"] [sysOverallPotential = "3"] [sysOverallCompetency! = "] [sysOverallCompetency! = 'Uncategorized']), count (...))? >
  
  I tried store these numbers in the variable, then compare them, but that does not also as maximum() works for data only xml elements. Is there a way by which it could be done.
  
  Thank you

  
  
   count(current-group()) ?>
  
  
   -- This will give you the maximum count in particular group
  

• Function of loading data - maximum number of columns?

  Hello
  
  I was able to create a page with load data wizard. I used this wizard page before with no problems, but in this case specific I want to load a spreadsheet with a lot of columns (99 to be precise). When I run the page, download the spreadsheet in the appropriate table, but only the first 45 columns. The other 56 columns have null for all rows. In addition, there are 100 rows in the spreadsheet and it does not load them all (it charges 39).
  
  Is there a limit to how many columns it can handle?
  
  
  Also, when I re - download the same file, the results of loading data show that he inserted 0 rows, update of 100 lines, failed 0 zeros. However, there are still only a total of 39 rows in the table.
  
  
  Thoughts?
  
  Steve

  Steve wrote:
  FYI, I understood why he was not load all 100 lines. Basically, I need to put two dependent columns in the definition of charge instead of one; It was see several rows in the spreadsheet and supposed that some were even record based on a single column. If this part is resolved...

  I still would like comments on the number of columns of load data wizard can handle, and if there is a way to manage more than 45.

  The load data wizard can handle a maximum of 46 columns: + {message identifier: = 10107069} +.

• Need help with the analytical function select maximum and minimum of the results of the column

  Hey there OTN.

  I have an interesting application that I was hoping you would be able to help me with. I have a requirement to conditionally select the max and min of a column in bi-editor and since my editor works from an OBIEE analysis, I need store MAX and MIN of the column values in separate columns to match with. See the example below. You will notice that there are 4 stores including today's sales. I must have OBIEE through all the results of the column for sales, then choose the max of the dataset object. I can't use MAX here because he will choose the MAX of the line which will return only sales of this line. Instead, one must analyze all sales results and choose the appropriate column. Any idea on how to do this in OBIEE/publisher? Or is this not possible.

  Day	Store	Sales	Sales of MAX	Sales MIN
  05/11/15	Store 1	5000	8000	1000
  05/11/15	Store 2	7500	8000	1000
  05/11/15	Store 3	1000	8000	1000
  05/11/15	Store 4	8000	8000	1000

  I'm waiting for your answers. Thanks in advance!

  PS: I will always mark messages that are useful and eventually mark it as correct answer if we come to a resolution!

  See you soon.

  You can't do the same thing with RANK ("dirty")?

  Rank ("dirty") = 1: the max value in the result of sales

  RANK (-1 * "Sales") = 1: the min in the result of sales value

  I guess you can and then format the cells based on these values, where a value of 1 is the max or min according to the RANKING formula you used...

• Maximum, Count Distinct functions in the model.

  Hello
  
  I have a set of data that I tried to regroup for a report.
  I need in the report so that I have product code list in a column and Max (Product Code) in another column product code, product code Sub are strings and not numbers.
  
  
  Suppose that my data set has
  
  
  product code:-product-sub-code
  ____________________________
  
  ABC | 1A
  ABC | 1 b
  ABC | 1 c
  def | 1 B
  def | 2B
  def | 2 c
  ...
  ...
  ....
  ...
  ...
  
  I need to report
  
  ABC | 1A
  def | 2B
  
  ..
  
  
  
  I gathered it and I tried to show the Max (product code) for the current group. But it gave me a number instead of text. I tried to select 'text' to the form field. But it is automatically change the number.
  
  
  Also, can you let me know how to write the number (code of separate by-product). I must also add that column.
  
  I can't add in SQL because there are tons of models on this data set. I have to do it in the model.
  
  Any help is greately appreciated.

  Try using this: -substitute your domain under product code name

  Thank you
  Bipuser

• Maximum in the analytic function

  Hi guys
  I need to have a single folder by facility_id (Group of)
  
  I used analytical as oracle below give me all five for a reason any.
  
  SELECT MAX (cost_report_year) on (id_facility score),
  ID_FACILITY,
  total_net_rpt_rev_087/total_days_of_serv_078 AS TOT_NET
  OF cost_resdays_revenue
  where id_facility like '004000';
  
  
  MAX (COST_REPORT_YEAR) OVER (PARTITIONBYID_FACILITY) ID_FACILITY TOT_NET
  ------------------------------------------------- --------------- ----------------------
  2003 004000 111.633090024330900243309002433090024331
  2003 004000 114.30528
  2003 004000 130.434365281875448528825452515748345427
  2003 004000 138.316281676844558515502846859604094758
  2003 004000 147.184335499354261366525316005165909068
  
  
  wherever I don't need only one record with year 2003
  
  Please help me where I am missing
  J

  You do not specify which of these lines is accurate, but I think I know what you're getting...

  The Oracle SQL reference contains an example that might help you:

  SELECT manager_id, last_name, salary
  FROM      (SELECT manager_id, last_name, salary,
       MAX(salary) OVER (PARTITION BY manager_id) AS rmax_sal
       FROM employees)
  WHERE salary = rmax_sal;
  

  So put your current query in a subquery and add a similar condition:

  SELECT cost_report_year, ID_FACILITY, TOT_NET
  FROM     (SELECT MAX(cost_report_year) over (partition by id_facility) AS maxyear,
       ID_FACILITY, cost_report_year,
       total_net_rpt_rev_087/total_days_of_serv_078 AS TOT_NET
       FROM cost_resdays_revenue
       where id_facility like '004000')
  WHERE maxyear = cost_report_year
  ;
  

• Compaq Presario C700: Compaq Presario C700 maximum upgrades. CPU/SODIMM

  Hello

  Please answer suite

  1. how to get the maximum for components upgrades

  CPU / SODIMM given the configuration of the model Compaq Presario C797EE mentioned at the end.

  2. Why is there BIOS ver F.35 for Presario C700 when later offered is the worm F.34 bios on HP web. What is the difference. Where can I find both to be uploaded with the release notes. New BIOS on model C797EE allows processors support Intel Core 2 Duo X 9000 and PC6400 SODIMM for 8 GB?

  3. There is evidence of success update here. Only difference is its Compaq Presario C797EE but C771US not and was able to upgrade CPU Core 2 Duo T9300. Is it possible to upgrade series C700 (C797EE) to Intel C2d Extreme X 9000 processor. If this is not the case, what is the max for the chip set used in C797EE.

  4 NT are different for Intel T9300 and others by 35W 44W or any other factor, will they perform the upgrade, if yes then please provide last possible list compatible CPU my current chip-set

  Comparative analysis of the applications here are showing different results. Please see Sandra chipset readings compare to the results of CPU - Z.

  I will be grateful

  Thank you.

  Current configuration of the system:

  identified by different applications

  CPU - Z:

  Chipset: Mobile Intel (r) 965 Express Chipset Family

  CPU: Intel (r) Core (TM) 2 Duo CPU T5750 @ 2.00 GHz

  Socket P (478)

  Memory: DDR2

  Format of SO-DIMM

  Size 2048 MB

  Bandwidth Max PC2-5300 (333 MHz)

  DMI BIOS

  vendor Hewlett-Packard

  Hello, just let everyone know that my upgrade worked.

  -Processor

  Updated for intel T9300 as reference. probably could support the x 9000, but it was much more expensive is not a value

  -Memory:

  I was skeptical with past more than 4 GB, however, currently functioning 6 GB (2 X 4). foung are not accidents of errors due to modules. Works perfectly.

  . After these updates, I installed small SSD, which added to the startup that gave more boost to the system.

  . Replaced the DVD with Caddy drive through visruth, installed with 1 TB

  http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/dimension-of-DVD-CD-used-in-Compaq-Presario-C700/m-p/4926179

  . Replaced with 12 cells battery

  Conclusion:

  This unit of 8 years demonstrated startup, transformation and loading speeds that could be compared to couple of old machines, 6 GB working memory space that can accommodate witout heavy programs using the file (actually disabled) Exchange and on the storage of Tera bytes to store every necessary thing making the year becomes mordern General phone use. Only thing that is not dealing with it is the graphics card. Besides that all is well, infact it runs more more fees than before.

  Thanks for your advice

• Maximum hard disk on Tecra M4

  I have a Tecra M4, and I think to upgrade the hard drive to a SATA 320 one. Y at - it a maximum size of hard drive for this model? Also the functions of "Safe custody" of HD will still work if you install a new?

  Thank you
  Mark

  Hello

  There is certainly a point HARD drive size limitation is that the BIOS supports not all HARD drive sizes, and to be honest think I don t think the 320 GB HARD drive would go.
  I think it s all just too big

  Unfortunately, Toshiba doesn't provide details about the possible HARD drive s max
  But I think that a 120 GB HDD should t be a problem

• Maximum in a contingency table

  I use this formula in excel, but I can't do the same thing to the numbers:

  = {max (if (c1 = a1:a1000, b1:b1000))}

  This is an array formula, which is a thing of Excel, but not taken in charge by a number. I'm not really clear on what that is. It returns the maximum value in column B of rows where column A = the value in cell C1? In other words, a MAXIF function?

• Get the maximum index of a vector of growth

  Hello

  I'm having a very strange problem. I simulate data with an sine function in a while loop and I keep the values< 0.7="" into="" a="" vector.="" when="" the="" sinus="" values="" are="" over="" 0.7,="" i="" remove="" the="" vector.="">

  I would like to get the maximum index of the vector at each iteration of the loop. However, I get a zero index while the vector has a size > 0.

  It's really strange, because if I put the values of the iteration instead of the values of the sine, the index created is correct (the only difference is that the iteration number is an integer, while the sine is a decimal number).

  To make someone understand something?

  Thanks for your help

  Andrew

  Instead of "delete table", just leave the REAL empty case and 'use default if unwired' on the output of the table tunnel.

  Once the sinuses is once again<0.7, you="" are="" on="" the="" descending="" branch,="" so="" the="" first="" element="" is="" always="" the="" largest="" for="" a="" while.="" nothing="" wrong="" with="">

  I would also put indicators after the case structure so they update in all conditions.

  Table min & Max will give you the index of the element with the highest value. If you want to know the size of the array, use the function "size of array".

• Find the exact index of maximum PNo() local and ChnFind() seem to be problematic

  Good day to all experts DIAdem!

  I am after some help and wonder if what I intend to do is possible, as much as tiara fucntions are concerned.

  I have a few cyclical data (continuous acquired as a set of data), which I am able to identify individual events. Within each of these events, I use the StatBlockCalc, so calculate the minimum and maximum local power (in the range of the specified index). I would then use the calculated maximum, a specific channel, then 'read' effective competition on other channels.

  I tried to use the ChnFind and PNo and both give results that often fall beyond the top and bottom of the index for this event. I believe that this is due to the fact that these search functions for a nearest value of the value in question and NOT the exact value for (rounding errors may also play a role). Please note this is not a criticism of the functions, because I believe that what I am asking is perhaps more by the high-performance computing (as opposed to hunting for the nearest value).

  So my question is - this feasible? To calculate a local maximum, and then use this value index reading on the remaining channels (to determine the values to the maximum).

  I hope that what I am asking is clear, if not so, feel free to ask away.

  Kind regards

  Dan

  Hi Dan,.

  If you want to attack this from the rounded side error, then I suggest to insert the ValEqual() function in your search expression - it has been designed to avoid rounding problems you seem like you're running.  My other recommendataion would be to abandon PNo() and use instead of ChnFind() with the known since your window index the starting index.  This action runs more quickly and find the extremum of right.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• Maximum value such as a number or a string

  Hallo,

  I calculated the maximum value of a channel. The next step is to use this value for further computation. My problem is that I can't use this value as a number. It is just a string. I tried with

  ChnPropGet then I got the number. But I can't use it for calculations. Anyone have an idea how I can fix this problem?

  I've attached a screenshot of my script. I use the German version of 12 DIAdem.

  Thanks for the help...

  Hello LePot,

  the properties. The function returns the property in its native type. If you navigate to the maximum property of a channel, it will return the value as a floating point number. You can check this by running the following script:

  (The script assumes that the dataset example is which has a number of Group 3 with a channel named "Res_Schall_1". But your chains should give you the same result with the message box showing "double."

  Dim Maximum
  Maximum = Data.Root.ChannelGroups (3). Channels ("Res_Schall_1"). Properties ('minimum'). Value
  MsgBox (TypeName (Maximum))

  If you ever want to convert a number represented as a string, be careful when you use "CDbl". This VBScript function assumes that the number is formatted by using the language of oyur BONES, especially the decimal setting (in '. 'or', '). If the setting of the operating system does not match the way the number is converted to a string, you have a problem. That's why the offer DIAdem::Str() to go a certain number to string s and Val() to go the opposite direction. Using CDbl can create rellay average errors that are difficult to detect.

  Andreas