Maximum virtual interfaces (VLANS) FWSM latest version

Similar Questions

• Changing the language of the INTERFACE - using the latest version of Skype on Windows Update 8.1

  I was using Skype to chat this AM and keep Skype running. When I looked again the language of the INTERFACE was changed to a (including fonts), that I do not recognise. So I can't use the menus... and begins at the cursor to the right instead of to the left in the chat window.
  
  I reinstalled Skype with English as the language of choice. Skype has always with the same "non-English language. I do not use that language for any other purpose on this laptop.

  https://support.Skype.com/en/FAQ/FA73/how-do-i-change-the-language-used-by-Skype-for-Windows-desktop

  Be aware that in the case of right-left (Hebrew, Arabic) languages, the Tools menu is the next right.

• How to find the latest version of material available for a virtual computer

  Hi, I have a problem to upgrade the hardware of the VMS version.

  My $vm = Vim::find_entity_view (view_type = > 'VirtualMachine', filter = > {'name' = > $vm_name});

  $vm-> UpgradeVM();

  Call to the UpgradeVM method I sometimes get an error saying: compatibility of the virtual machine is already up to date

  I can get the latest version of hardware verification $vm - > config-> version, but I don't know whether it is the latest version of material available. How can I find out who is the latest material available for a virtual machine before you upgrade?

  Thanks in advance.

  You can retrieve the list of configurations of operating systems, virtual material, supported, capabilities, etc. using the http://pubs.vmware.com/vsphere-51/index.jsp?topic=%2Fcom.vmware.wssdk.apiref.doc%2Fvim.EnvironmentBrowser.html EnvironmentalBrowser

  For the version of VTM, take a look at the QueryConfigOptionDescriptor() that returns a list of the ESXi hosts and VTM version, he takes in charge. Joint a screenshot using the vSphere MOB

• I upgraded to latest version firefox 29,0 in windows machine 7. All the user interface looks very good. Undo close tab does not work for me. Is that not been addressed?

  Undo Close tab does not work in windows 7 for firefox latest version 29,0

  You can do this via CTRL + SHIFT + T as well.

  You can try to start Firefox in Mode safe to see if Firefox works correctly without error? You can start Firefox in Mode safe below:

  • Windows/Mac: choose Help > restart with disabled modules
  • Linux: run firefox-safe-mode in the Terminal/Konsole

  If Firefox opens fine with no problems, it is probably one of your extensions that is causing the problem. You can reactivate your modules one by one until you find the one that is causing the problem to be re-activated.

• Deploy the latest version of View Client via Web Interface?

  Hello

  Last week I was given an article ( http://www.networkworld.com/news/2011/021011-windows-fix-vmware-software.html ) and this KB ( http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1034262 ( )

  I wonder if there is an update also the Manager of the view for the latest version of the client will be available for those who connect to the display server?  Or is there a way I can deploy this client within the display server?

  We have many student users who now have connection problems, and the new version of the client solves this problem.  I'm just trying to discover the best deployment mechanism.

  Thanks for your comments!

  There is a downloads.war on connection brokers folder that contains all of the installation of the system.  It's also simple to replace these files with new clients named in the same way.  Here's a write up to someone in another thread.

  http://www.christowles.com/2011/02/VMware-view-45-client-353760.html

• SG300-20 - configure DHCP on the interface VLAN

  I have read the different partners of the discussions on the SG300 and SG500 going on regarding the high setting of VLAN and DHCP on VIRTUAL networks.  For some reason, I could not get even this simple task to work.

  First thing I did was update my version firmware and boot as follows:

  SW version 1.3.7.18 (date of 12 January 2014 time 18:02:59)

  Start the 1.3.5.06 version (dated 21 July 2013 times 15:12:10)

  HW version V02

  When I rebooted the SG300 after the SW/Boot updates the boot configuration has been crushed and I had to configure my switch from scratch.  The intention is to have two VIRTUAL networks:

  VLAN 1: all the devices, servers, etc.

  VLAN 2: subnet basis which distributes DHCP addresses

  The SG300-20 is connected to a router Asus RT-AC66U on the 192.168.1.x subnet and provides access to the internal network and WiFi access (IP address of the router is 192.168.1.1 and the default gateway).  Everything works without any problem.  So my task is simply to create 2 VLANS on 192.168.2.x subnet and use DHCP to assign addresses.  I spent many hours on it and I still can't get it to work.  When I connect a laptop to the port (GI8) assigned to 2 VLANS, I end up finding a few wobbly 169.254.x.x address.  I definitely thought something would not 'easy' that hard to set up, but apparently I was wrong.

  The SG300 is running in mode L3 as shown in my running-config below.

  Someone gets to see something which could prevent my client from the laptop to receive the interface VLAN 2 DHCP IP addresses that are not on the 192.168.2.x subnet?

  Any ideas / suggestions would be greatly appreciated!

  Here's my running-config:

  config-file-header
  MYSTICSW1
  v1.3.7.18 / R750_NIK_1_35_647_358
  CLI v1.0
  router adjustment system mode

  SSD of encrypted file indicator
  @
  SSD-control-start
  config of SSD
  control of password file unrestricted SSD
  no control of the integrity of the file ssd
  SSD-control-end cb0a3fdb1f3a1af4e4430033719968c0
  !
  database of VLAN
  VLAN 2
  output
  Add a voice vlan Yes-table 0001e3 Siemens_AG_phone___
  Add a voice vlan Yes-table 00036 b Cisco_phone___
  Add a voice vlan Yes-table 00096e Avaya___
  Add a voice vlan Yes-table 000fe2 H3C_Aolynk___
  Add a voice vlan Yes-table 0060 b 9 Philips_and_NEC_AG_phone
  Add a voice vlan Yes-table 00d01e Pingtel_phone___
  VLAN voice Yes-table add Polycom/Veritel_phone___ 00e075
  Add a voice vlan Yes-table 00e0bb 3Com_phone___
  Hello interface range vlan 1
  hostname MYSTICSW1
  host 192.168.1.15 record
  logging source hostname id
  username privilege 15 b4a0fcf20b2cd9d80a55b06ab8f83277f9733904 encrypted password cisco
  location of the SNMP-Server Office
  clock timezone ""-5
  DST Web recurring U.S. clock.
  clock source sntp
  unicast SNTP client enable
  unicast SNTP client survey
  survey of 192.168.1.10 SNTP server
  !
  interface vlan 1
  IP 192.168.1.254 255.255.255.0
  no ip address dhcp
  !
  interface vlan 2
  name MysticWAN
  192.168.2.254 IP address 255.255.255.0
  !
  interface gigabitethernet8
  switchport mode access
  switchport access vlan 2
  !
  output
  Default IP gateway 192.168.1.1

  Thanks in advance!

  Clint Lambert

  Clint, please see this post

  https://supportforums.Cisco.com/message/4178990#4178990

  -Tom
  Please mark replied messages useful
  http://blogs.Cisco.com/smallbusiness/

• 3rd interface VLAN does not add properly

  Hello

  I have some difficulty with a switch 300 series running in mode of L3. I created two VLANS each with an interface IP that work well without any problems. The problem I have is when adding a third interface VLAN and IP - for some reason the switch seems not add the subnet in its routing as a directly connected route table.

  The first and second VLAN add correctly. It seems to be the third. I have factory default, the switch and still the same. Version is 1.1.2.0.

  The Setup is as follows:

  VLAN1 - 10.20.2.253/24

  VLAN2 - 192.168.2.253/24

  VLAN3 - 192.168.3.253/24

  Ping results are:

  switch27b42e #ping 10.20.2.253

  Ping 10.20.2.253 with 18 bytes of data:

  18 bytes from 10.20.2.253: icmp_seq = 1. time = 0 ms

  18 bytes from 10.20.2.253: icmp_seq = 2. time = 0 ms

  18 bytes from 10.20.2.253: icmp_seq = 3. time = 0 ms

  18 bytes from 10.20.2.253: icmp_seq = 4. time = 0 ms

  -10.20.2.253 PING Statistics-

  4 packets transmitted, 4 packets received, 0% packet loss

  round-trip (ms) min/avg/max = 0/0/0

  switch27b42e #ping 192.168.2.253

  Ping 192.168.2.253 with 18 bytes of data:

  18 bytes to 192.168.2.253: icmp_seq = 1. time = 0 ms

  18 bytes to 192.168.2.253: icmp_seq = 2. time = 0 ms

  18 bytes to 192.168.2.253: icmp_seq = 3. time = 0 ms

  18 bytes to 192.168.2.253: icmp_seq = 4. time = 0 ms

  -192.168.2.253 PING Statistics-

  4 packets transmitted, 4 packets received, 0% packet loss

  round-trip (ms) min/avg/max = 0/0/0

  switch27b42e #ping 192.168.3.253

  Ping 192.168.3.253 with 18 bytes of data:

  PING: net-unreachable

  PING: net-unreachable

  PING: net-unreachable

  PING: net-unreachable

  -192.168.3.253 PING Statistics-

  4 packets transmitted, 0 packets received, 100% packet loss

  Additional output which can be interesting:

  switch27b42e #show ip int vlan 1

  Type of priority status done IP address

  Broadcast

  ------------------- ----------- ---------- ---------- -----------

  static 10.20.2.253/24 disable invalid

  switch27b42e #show ip int vlan 2

  Type of priority status done IP address

  Broadcast

  ------------------- ----------- ---------- ---------- -----------

  static 192.168.2.253/24 disable invalid

  switch27b42e #show ip int vlan 3

  Type of priority status done IP address

  Broadcast

  ------------------- ----------- ---------- ---------- -----------

  static 192.168.3.253/24 disable invalid

  switch27b42e #show ip route

  Maximum parallel paths: 1 (1 after reset)

  IP routing: enabled

  Code: C - connected, S - static, D - DHCP

  C 10.20.2.0/24 is directly connected vlan 1

  C 192.168.2.0/24 is directly connected vlan 2

  What I am doing wrong?

  Thank you in advance.

  Craig

  Hi Craig,.

  I don't think you're doing anything wrong.

  The command line shows that this IP for VLAN3 interface is not connected, or at least nothing is connected physically VLAN3.

  Connect a PC VLAN3 and see if the interface road happens.

  I guess just that nothing is plugged physically vlan3.

  regards Dave.

• Why the latest version allows only two addressed to be visible?

  Usually, I have send emails to a group diverse in people and wants to be able to see all the people to whom I send e-mail. The latest version has only room to view the two addressed before forcing a made scroll to ensure that all the wanted names are there. WHY IS IT BETTER THAN THE OLD METHOD?

  Bob Rice aka bigears78 (journalist) and anyone else affected, sorry for the inconvenience caused by changes in the latest version TB31 recipient box. and some of the answers here are not accurate.

  (1) prior to TB24, lines of default recipient number is a 4. In TB24, we changed that with my patch in Bug 425451 to become 3, assuming that this will save valuable space vertical for a large number of users, given that the entire header area consumes a lot of screen real estate. For users who regularly use and want see more than 3 recipients at the same time as a default value, there is a hidden pref:

  Tools > Options > advanced > General > Config Editor
  mail.compose.addresswidget.numRowsShownDefault = 3;

  (2) since time immemorial, you can drag to manually enlarge the composition for this specific message header area (not retained, because your next message will be different; use pref by default lines above). Before TB31, drag the splitter under the subject field. TB31 leave, drag the lower border of the header area of composition, i.e. the lower border of the toolbar put formatting in the case of HTML messages.

  3) there is a bug in TB31 (at least on Windows XP theme which I use) that the vertical space of the widget has been calculated too small; Therefore, there is a scroll bar as soon as you start a new message that should not be there. When you add multiple addresses, these few missing pixels can cause the 3rd row to never be visible only IF you expand the widget manually as described in 2) above, or increase the number of default rows, see 1). If you find yourself with a maximum of 2 lines visible at any time, which will be mainly seem to be only 1 row because the empty line account also (for details, see 4). I think that we can turn 1056404 Bug to cover this issue.

  OT: I had notified volunteer developers responsible on this issue via PM in April, in time before the release cycle, but did not answer because they were not happy with my other suggestions, how to make the new a little less strange strange flat header by making at least the header (to, CC,...), the type selectors married in rather that stand out for no reason.

  (4) in TB24, entry in the last line recipient has confirmed this recipient and added a new blank line; Tab would just activate the subject field. In TB31, tab behaves now as input, also creates a new line. There are advantages and disadvantages of this behavior, but we have heard several users that they are not happy with this, so we are coming back that the change to the old behavior in Bug 1043784 .

  That's the news experts.
  I hope this helps.

• What is the latest version of I film? I have the version 10.1.2

  It is the latest version equipped with a detective? If my current version has an inspector, where is he?

  I can't find.

  Am thinking to go to final CUT PRO. Big learning curve, is it useful?

  Ian B

  10.1.2 is the latest version of iMovie. There is no Inspector Windows, most of the items that you normally see in the Inspector is scattered throughout the interface. FCPX is a publisher of pro and offers many more controls (including the Inspector) and features than iMovie. The learning curve is steep, but if you're a serious editor I think you will love it. It costs $300.

• The release of Firefox 8.0.1 hangs ALL THE TIME on MacBook Pro OS x 10.6.8 after installing the latest version of Flash

  For now, Firefox is now virtually unusable on the Mac.

  It is not related to any particular Web site, although Web sites with flash or java script or 'amateur' I / Fs are guaranteed to crash Firefox.

  For example, a minute before, I tried to enter a search phrase in Google (main page) and crashed. I tried to enter a search expression crash and search engine for Netflix. I did not see an accident on the pages of Fox News, however, and they are a rich content.

  Firefox was not doing this before the 8.0.1 update (but I can't distinguish this event to update Flash in 11.1.102)

  I know that Firefox is virtually unusable (and I'm in Safari at the moment).

  I guess its possible that something on the Mac changed (firmware) but why is there not a problem with Safari then?

  It's not like I had time for debugging part of another software application. I don't have (I'M a professional software developer that develops on ALL platforms/OS including OSX versions, Windows back to XP and Linux, most of the flavors and I am an expert in Qt also)

  I've NEVER had this problem before. At the beginning, that I was leaning towards the Flash update. But now, I'm not sure.

  If someone suggests a progression of movements to isolate this problem, I'll only take a long time to resolve this. Absolutely, I can't believe that more people are not having this problem.

  Ok.. I'll start by disable plugins. Then I'll start backup on previous versions, starting with Flash, then Firefox, because they were the last 2 updates.

  So, finally I returned to Firefox 8.0.1
  I reduced my plugins/addons to fully functional minimum.
  This includes using adblock.

  I went DOWN the Flash on Mac to the latest version 10. It was released less than a month ago.

  This seems to have solved my problem.

  So, there's something about the release of the flash 11 version which is causing many accidents of firefox. (versions 7 and 8)

  I'll revise it if I see accidents. But I left a few flash sites to the top and, previously, this finally seemed to crash Firefox and so far so good.

• Latest version of the driver AT/GPIB/TNT built with VAT Statement - 32.h?

  Context: AT-GPIB/TNT card linking 488.2 driver see 1.70 in Win98 TransEra HTBasic 8.3, driver GPIBNI. A device on the bus requires that interrupts is disabled. This allows this device works properly, but other devices hang. For NI Spy restores proper operation, which seems to indicate a timing problem. Technical support TransEra agrees with this assessment. Earlier versions of their software (non-Windows) error-free work. So the problem is their driver interfacing to the pilot of 1.70.

  8.3 is not the current version, they are not too motivated to fix it. However, they did look at history and found this:

  "One of our engineers did some research and I could at least limit change that probably caused the problem. Apparently, our driver GPIBNI was built using the VAT Statement - research online and 32.h include file, this file has been replaced by OR with NI488.h. He was not able to know exactly which version of the software OR it was replaced, but NEITHER are likely to help with this, or you can try just a couple of their older versions. »

  So the question is, what is the latest version of the driver OR card AT-GPIB/TNT for Windows 98 built using the VAT Statement - 32.h include file? And where can I get a copy of it? TransEra suggesting that as the solution.

  Thanks for your help.

  
  

• How to ONLY install directx 3 is the use of video games. Without having to install the latest version of directx?

  I have an old video game of cdrom for windows 95, 98, and a message asking me to click here and there to download directx 3A. I'm going to microsoft for this and only the latest version is available and this download does not work. Msg continues to be the same, even after a few tries.

  Windows 7 already comes with the latest version of DirectX installed. Have you tried to install the game in compatibility mode?

  Right click on the executable file / Installer-> properties and select the Compatibility tab. Click the check box before you run this program in compatibility mode for option, and then select Windows 95/98 from the drop-down list. then try to install the game using run as administrator.

  If this does not work, I suggest buy you an old copy of Windows 95 or 98 license off ebay, download for free SUN Virtual Box and install Windows 95 and 98, and run your game in there.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Dragging my updated firefox to update to the latest version and now the game I play which is a flash based game lag all the time in firefox, but not in Internet Explorer

  OK so I play a game called Emporea on my PC and it uses flash, I've never had a problem then I refreshed firefox as she suggested and it updated to the latest version, I've never had problems with it before on previous versions and now, with this, the lag is so bad that it makes the game almost unplayable. I tried to open it in other browsers such as IE, and it works very well in people. so, the question is somewhere with firefox, I've updated my flash drive and still no change in firefox

  One of the changes in Firefox 48-49 title is e10s, separating the process of browser interface process page content. The performance impact of this can vary a lot between the systems, and it would be useful to know if you have this feature enabled. To check this, either:

  • button '3-bar' menu > '? ' button > Troubleshooting Information
  • (menu bar) Help > troubleshooting information
  • type or paste Subject: support in the address bar and press enter

  In the first table on the page, find the line of Multiprocess Windows and see if the number on the left side of the fraction is greater than zero. If so, you are using e10s.

  If you use e10s:

  To determine if this feature is causing this problem, you can turn off as follows:

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste the cars and make a pause so that the list is filtered

  (3) double-click the preference browser.tabs.remote.autostart.2 to switch the value from true to false

  Note: the exact name of this preference may vary, but it will start by Browser.Tabs.Remote.AutoStart

  On your next startup of Firefox, it must be run in the traditional way. Any difference?

• interface vlan problems addin

  Hello

  I have a problem with my 8164F with 6.1.0.1 powerconnect version

  I create the vlan 643

  then I create an interface vlan

  interface vlan 643
  IP 172.24.64.2 255.255.240.0
  output

  When I ping the ip address of the switch

  ping 172.24.64.2
  Ping 172.24.64.2 with 0 bytes of data:

  4 packets transmitted, 0 packets received, 100% packet loss
  round-trip (MS) min/avg/max =<10><10><>

  in the journal, I have the following line

  <173>11 Jun 14:39:29 172.16.8.100 - 2 TRAPMGR [1206213340]: traputil.c (697) 1604 %% link on Vl643 is down

  show ip interface vlan 643

  State of the routing interface... Down
  Primary IP address... 172.24.64.2/255.255.240.0
  Method......................................... Manual
  Routing mode... Enable
  Administrative mode... Enable
  NET before realized emissions... Disable
  Proxy ARP...................................... Enable
  Local Proxy ARP... Disable
  Statement of assets... Inactive
  MAC address... D067. E595.0B1A
  Type of encapsulation... Ethernet
  IP MTU......................................... 1500
  Bandwidth...................................... 10000 Kbps
  Destination unreachable... Activated
  ICMP redirects... Activated

  that really interested me

  I simplified my config and merge the two portchannel.

  and it works.

  I'll come by later to STDs

• Configuration of several interfaces vlan on a layer 3 switch

  I am trying to incorporate a layer 3 switch in a network. (see figure 1 below). My problem is that in the configuration below, the layer 3 switch seems to offer no additional benefit on a layer 2 switch, because it does not pass packets from Layer 3, instead, it will take an additional router configuration.

  If I set up 2 interfaces like no switchports (diagram2) and create virtual interfaces on the switch of level 3, that is to say 0.1/g0, g0/0.2, 0.3/g0, g0/1.1,g0/1.2, g0/1.3, configure dot1q encapsulation and add ip addresses and subnets on each interface, so I understand that I can use the switch of level 3 as a router.

  However this introduces a new problem now, VLAN 1 is on both interfaces, so devices in VLAN 1 on each interface will have point to the default gateway on this specific interface and features of VLAN 1 on G0/0.1 interface must be configured with a different subnet than those on G0/1.1 interface.

  It does not seem logical, am I missing something?

  Assignment.jpg

  

  Figure 1

  assignment2.jpg

  

  Paul

  On a L3 switch you do not configure subinterfaces (usually).

  You create what's called Lass (Switched Virtual Interfaces) instead of this, and what are your L3 interfaces.

  If your L3 switch ports are ports of L2 or other trunks or assigned to a VLAN specific.

  For each VLAN you want to route you create then a SVI IE. -

  int vlan
  IP x.x.x.x
  No tap

  and the default gateway for clients in this vlan is the IP assigned to the SVI.

  Any other configuration of L3 interface, you add to the SVI.

  The only time wherever you actually use the ports of L3 is when you connect to a router for example.

  Jon