MAXL scripts to perform the backup of the following

Similar Questions

• El Capitan - mail rules > ' perform the following Actions: "menu drop-down is hidden.

  Here's the problem: after setting up the mail in El Capitan and synchronization iCloud with mail rules (the rules are still intact), I noticed a strange thing trying to adjust my Mail rules to filter emails with a few new subfolders. Rules are still in place and function (i.e. ' if one of the following conditions is met:' of > Contains > E-mail address > (+ other rules), then, "perform the following actions:' such as moving, e-mail message, icon bounce, etc."), but the top drop-down selector below him "perform the following...". "section, which in my case is generally" move message to: (name of the folder here) ", is hidden from view. It's still there, but I can't physically click top because the table/cell/div that contains this selector is compressed or not large enough to display the menu drop down. I know that this is true is because the other rules that make them several "Perform" actions... ' display the actions of second and third, but are hidden one.

  This is a problem because if I add another "' move to ' action, it is in conflict with the first... but I can't delete the first action, because I can't click on it."

  I realize that it is a strange... Anyone have any suggestions on how to fix this?

  Thank you

  Shane

  You may need to scroll down to see all the criteria and actions in a rule.

• Lost mail rules section "perform the following actions.

  Hi-

  Install a new version of El Capitan (10.11.2). Set up Mail for the first time. Adding rules to specific e-mail to selected mailboxes. The more rules, I added more I noticed that the section "Perform the following actions" became smaller until this article is no longer usable (see photo). Any ideas what can be done? Is this a bug?

  Thank you!

  -Dave

  

  Please take these steps to remove the mail folders 'sandbox '.

  Step 1

  Back up all data.

  Triple-click anywhere in the line below on this page to select this option:

  ~/Library/Containers/com.apple.mail

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ Reveal

  the contextual menu.* A Finder window should open up with a folder named "com.apple.mail" selected. If this is the case, move the selected folder - not only its content - on the desktop. Open the window Finder for now.

  Restart the computer. Launch Mail and test. If the problem is resolved, you may have to re-create some of your e-mail settings. Any writing paper custom that you created may be lost. Ask for instructions if you want to keep these data. You can then delete the folder that you moved and close Finder.

  CAUTION: If you change the content of the sandbox, but leave the folder itself in place, Mail may hang or starts any. Remove the tray to sand everything will be rebuilt automatically.

  Step 2

  If step 1 does not resolve the problem, repeat with this line:

  ~/Library/Containers/com.apple.MailServiceAgent

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

• Unable to connect to the wireless network, error message "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.

  Original title: Unable to connect to the wireless network

  Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7.  "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.  Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3.  It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.)  Before that, wireless network worked well.   (So unable to connect to the Internet for updates.)   Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate.  I don't remember what I did to try to solve this problem in the last days.

  I should add that I have tried the solutions of the previous forum on this topic, and none worked.

  Hi Marilynnla,

  Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.

  Read this article and follow the steps. Lets see if it helps in any way.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2 (Works for Windows XP SP3 as well)

• (SOLVED) Windows could not finish repairing the problem because it is impossible to perform the following action: renewing your IP address

  Computer Dell laptop Windows XP SP3 - processor Intel Celeron M 1.40 GHz, 512 MB Ram, ATI MOBILITY RADEON 9000

  The local connection is working fine but my wireless connection does not receive through my laptop. The wireless works since it goes through my PS3 and my sister's laptop perfectly.

  I used the repair, but it will say:
  Windows could not finish repairing the problem because it is impossible to perform the following action: renewing your IP address

  I used in the cmd command:
  ipconfig/renew
  Needless to say a message:
  No operations can be performed on the wireless network connection, although it has its media disconnected.

  Help, please

  Received my solution of another comforter

  Told to go to my router linksy page http://192.168.1.1 setup and change the wireless security mode. It is in mixed mode to WPA2/WPA and I changed it to WPA2 Personal and it worked!
  Thanks for trying to help JW! : D

• MaxL script saved on the server

  Hello
  
  I MaxL script created and save the server to service Regional Administration. I have users who can launch the EAS web, however, it seems to not be able to see my MaxL script. What I gives no specific law, so it can see and run the MaxL script.
  
  I already schedule MaxL, sometimes, it's just users want to run that, on a case by case basis.
  
  Thank you

  Hello

  When you save your script there is a sharing option. Try this.

• Windows could not finish repairing the problem because it is impossible to perform the following action: renewing your IP address

  Last night after doing a reboot of my internet has stopped working.  I get the error indicated in the title, when I click on 'repair' under the Local area connection status window.

  I use a cable modem and going through a wireless router.  I know they work because I'm there access wireless typing to you all.

  When I type "ipconfig" in the cmd program, I get the following (which I thought was weird):

  Suffix the connection-specific DNS: cm

  IP address: 0.0.0.0

  Subnet mask: 0.0.0.0

  It was also strange to me that I could not access my router by typing 192.168.1.1 in my IE window.

  Also, why I type ipconfig/release, I get a message that says "IP address for the connection to the Local network map is already out." and when I type in ipconfig/renew, I get "an error occurred upon renewal of the connection to the Local network interface: the RPC server is unavailable."

  Just another note to add, I did a restore of the system to a point a week before I had the problem and I still have the same issues.

  I hope it is enough detail for each of you experts out there.  Thank you in advance! :)

  PS Sorry if this has already been answered, I was digging through forums for the last two hours.

  Your machine is not getting an IP address from the DHCP server.  Without an IP address, it will not communicate with any device on your network.  The error says "the RPC server is unavailable" or "the RPC service is unavailable"?  Whatever it is, make sure that your DHCP client service and your RPC service is running:

  Start-> Run-> "services.msc".

  In the window that appears, confirm that the "DHCP Client" and "RPC Remote Procedure Call ()" is present and that its status is "started" and its Startup Type is "automatic".  If this isn't the case, double-click top and doing it this way.  Also check your syslog, unusual errors:

  Start-> Run-> "eventvwr.msc".  Check the logs 'System' and 'Application '.

  Hope this helps,
  JW

• Y at - it a free version of Adobe Acrobat to perform the following...

  Is there a free version of Adobe Acrobat I can download to accomplish the following, only: 1) print in PDF format, 2) merge PDF files?  Otherwise, what is the best option (cheaper!) available to purchase these tasks of bases?  Please note that additional options of Acrobat are not necessary.  Thank you.

  Hello

  Yes there is a trial version (free version) available for all versions of Acrobat, but you will have to use the trial for Acrobat DC because this is the last version of Acrobat on the market. He would you allow to run tasks that you mentioned above. I want to tell you that the trial is valid for 30 days only.

  Please see the following link for download Acrobat DC. Once downloaded you would select get an option to choose, to license/purchase-it it or use the trial version, test option so that you can use as a trail one which is free and valid for 30 days only.

  Download Acrobat products | Standard, Pro | DC, XI, X

  Concerning

  Sukrit diallo

• MaxL Script to clear the data between two dates

  Hi all

  I need advice to clear the data between two dates, I have three dimensions in my sketch, 'eno', 'hiredate' and the 'actualamount '.

  Now I need to erase the data between the date range, up to now, I have this script,

  Fix ("HireDate", "Eno")

  Difficulty (@relative ("00:00:00",0),@relative("eno",0)) 2015-07-15 "))

  CLEARDATA "sal."

  endfix

  ENDFIX

  These scripts only clears on a specific day, but I tried to write the script to clear between two dates, I surfed on a few sites, but no clear answers, finaanly came here, kindly help in this regard.

  Thanks in advance.

  Have you not tried the format of "startdate":"enddate" for example "August":"September."

  See you soon

  John

• When you use SEEP (cloud planning), can still develop you MaxL scripts to load the data, metadata, run calc scripts, etc.?

  I'm happy to get my hands on an instance of SEEP, but until then I'm trying to understand some technical details that you cannot learn of Oracle demos.  For example, can I develop MaxL to automate various processes?  Is the utility planning avaialbe (OutlineLoad, PasswordEncryption, etc.) for use?  Thank you!

  I found what I was looking for after some digging.  Thanks Google!

  Administer the data management

• Is it possible to perform the following vmps on cisco sg500 and SG300?

  Hello guys,.

  I hope that all is well. I have a question that I'm not sure about that, the Cisco SG300-500 range can support VMPS.

  Kind regards

  Marcel Smal.

  Not that I know, this feature is generally available in the high range catalyst switches

  You can check if through emulators online for these platforms

  https://supportforums.Cisco.com/community/911/Cisco-small-business-onlin...

  or the admin guides

  http://www.Cisco.com/c/dam/en/us/TD/docs/switches/LAN/CSBMs/Sx500/ADMINI...

• Use a script to update the MaxL substitution variables

  We use the Essbase 11.1.1 version. Can we use MaxL script for updating the substitution variables rather than using the EAS web console? We want to put the MaxL script in a batch file and plan its Windows scheduled task.
  
  Thanks for your help!

  Hello-

  Yes. Here is an example of script maxl-

  connection "Hypadmin" "#" on myessbaseserver.
  spool to 'mymaxl.log ';

  / * Definition of the substitution variable * /.
  ALTER database appname.databasename set variable "CurMonth" "August";

  variable display;

  spool off;
  Disconnection;
  Exit;

  You can call this maxl from a batch file at the request of windows scheduled task.

  Concerning

• Required script - creation of the snapshot, keep for 24 hours, deleted and then repeat

  Looking for a script that will perform the following functions

  (1) create a snapshot of the virtual machine

  (2) keep the snapshot of the machine virtual for a period of 24 hours (or anytime definable)

  (3) remove the snapshot... .Rinse and repeat

  Sort of a "backup" of 24 hours. One of our VMs finance must be able to quickly return to the config of the previous days

  All licensees/aid

  Thanks in advance

  At its very simplest, you could do something in powershell and run every 24 hours on your virtual machine center:

  #Add PowerCLI

  Add-PSSnapin-name 'VMware.VimAutomation.Core '.

  http://Reflection.Assembly: LoadWithPartialName ("vmware.vim")

  $VCServer = "VCServer.

  $VMName = "FinanceVM".

  $SnapName = "NightlyBackupSnap".

  $VM = get-VM-name $VMName

  Remove-Snapshot - Snapshot (Get-Snapshot - name $SnapName - VM $VM) - confirm: $False

  New-Snapshot - VM $VM - name $SnapName - suspend: $True - confirm: $False

• Perform the calculation when the value of the Member is a string

  Hello
  
  I get the following error when I validate the rule.
  
  Details: cannot calculate. Essbase Error (1200354): compilation error formula for [Production calculated revenue] (line 3): type [NUMBER] is [STRING] ([@SUBSTRING]) expected in function [operator @EQ]
  
  The rule is
  
  Fix (Inbound,Outbound,@Attribute (transaction), @Attribute (Transaction_Queue))
  'Calculates Production revenue.
  (IF (@SUBSTRING (@NAME (@CURRMBR ("billing database")), 0, 1) == "Vo"))
  'Calculates the revenue generating' = 'Managed Volume' * 'billing rates;
  ELSE IF (@SUBSTRING (@NAME (@CURRMBR ("billing database")), 0, 1) == 'Mi')
  "Calculates the revenue generating" = 'Minutes for billing' * 'billing rates;
  ENDIF ;)
  ENDFIX
  
  Member of the "basis of Subscriber" is a smartlist. If the value of "foundations of Subscriber" is volume, my "Production calculated revenue' should be 'Managed Volume' * 'billing rates. Otherwise if my 'customer base' minutes my 'Production calculated revenue"should be
  'Minutes to the billing' * 'billing rates.
  
  Can someone please?

  Hi John,.

  Unfortunately you can not compare strings in essbase using operator ==: (.)

  What you need is the CDF string.

  Go to http://samplecode.oracle.com, click on the tab Code examples above, click on the Essbase link and select artifact 5441/String functions.

  Download it - there is a clever .cmd file and MaxL script to save the CDF. I think you have to bounce Essbase to take and EAS as well.

  Don't forget to edit the udf.policy file, although it is actually necessary only if you plan to use the ability of the CDF to write to the disk.

  See you soon... !!!

• script to add the location of the log file

  Hello

  I am having trouble with a script that I wrote a year or two ago for the 5.1 vSphere hosts. Now I'm looking to run on vSphere 5.5 hosts, and I make mistakes.

  # Connection to the ESX host to be configured.
  $a = Read-Host "Please enter ESX FQDN:
  Connect-VIServer-Server "$a" - Credential(Get-Credential) se

  # Set the directory SYSLOG #.
  $hostName = get-VMHost
  $hostName = $hostName.Name.Split(".") [0]
  $logLocation = "[AVH-ESXLogs]" + $hostName
  Game-AdvancedSetting Syslog.global.logDir - value $logLocation

  Disconnect-VIServer $a - confirm: $false

  When I run the script, I get the following error:

  Cannot bind the parameter "AdvancedSetting". Impossible to convert the value of 'Syslog.global.logDir' to type 'System.String' type 'VMware.VimAutomation.ViCore.Types.V1.AdvancedSetting '.

  To: C9: tank: 19

  + Set AdvancedSetting < < < < Syslog.global.logDir - value $logLocation

  I'm guessing it's something stupid, I was messing around with this script for a few hours and it's starting to all look the same.

  Thanks for the help.

  Eric

  You will need to do a Get-AdvancedSetting front, something like that

  Get-AdvancedSetting - $vmhost - name Syslog.global.logDir entity. Game-AdvancedSetting - value $logLocation

  You get the current setting and then redirect to the next cmdlet, which makes the change.

  See also the examples on the Set-AdvancedSetting cmdlet.