HP 23xi problem!

Similar Questions

• MacBook Pro retina connection to HP 23xi problem

  Hello community,

  I was faced with a problem, I bought a 13' Macbook Pro retina. Not quite a cheap machine.

  But when I connect via HDMI to my HP 23xi , the screen becomes blurred and cut (which I was able to fix in the framework). I tried to play with the features, but simply, it won't be better.

  I presume this is because it is the retina, of course. But I bought this monitor, a very nice screen a month ago, and I will not sell it or throw it away.

  I bought this Mac for web design, but this isn't the result I was expecting at all.

  I saw another post on the RGB fix, although I have not tried because it's not very practical, my problem is not the color, but rather the resolution of pixellation that appears on the screen.

  What should I do?

  My sincere greetings,

  Luisvf7

  Looking at the specifications for the MacBook,

  Digital video output Thunderbolt

  • Native of output Mini DisplayPort
  • DVI output Mini DisplayPort to DVI (sold separately)
  • Output VGA Mini DisplayPort to VGA (sold separately)
  • Dual-link DVI output Mini DisplayPort to DVI dual link (sold separately)

  HDMI video output

  • Support for the resolution of 1080 p at 60 Hz
  • Support for the resolution of 3840 by 2160 to 30 Hz
  • Support for the resolution 4096 by 2160 at 24 Hz

  I consider using a Mini DisplayPort adapter to DVI dual digital video link Thunderbolt.

  You will not get the display resolution of 2560 x 1600 that your MacBook Pro is capable of on your HP display because the display is not capable of this. Specifications for display

• HP 23xi monitor calibration

  I own a PC Toshiba laptop p875-7102-i7-3630qm Windows 8 with a brilliant display of 17.3 "1920 x 1080. It uses the integrated graphic chip Intel HD 4000.  I bought the HP 23xi based monitor very there comments.  Here's the thing, though: no matter what I do, I can't seem to get rid of the yellowish, this monitor seems to display.  Using HDMI, and VGA inputs (and BTW, the VGA seems better!), I was not able to get rid of it. Is it because of the on-screen anti-reflection coating? This is an IPS monitor, which I thought was supposed to lead to the best color saturation.  Compared side by side with the Toshiba screen clean laptop screen, the HP monitor is not as bright (painted white Web page especially to look much more yellow-brown).  In fact, it seems that Toshiba display is fresher and brighter. The HP is perhaps actually more precise color-wise-I don't know.  For those of you who own the HP, thanks for posting your picture settings and also if you get a better picture via the VGA input as opposed to HDMI (especially with the text).  On a separate note, I can't get audio when you use the HDMI, but I'll head to the Toshiba forums at this problem.  All my drivers for display, including CV, are up to date.

  I understand that your 23xi monitor does not display the colors as expected.

  It is similar to the question of the wrong colors in this document?

  Some monitors need a driver installed on the system before they work properly.  This driver has been installed?

• My visualization software - pavilion 23xi display

  Hi people, I use a hp pavilion desktop computer, h8-1170 uk, windows 7, beautiful machine, 18 months oldI just bought a Pavilion 23xi screen and loaded the driver and the software 'my view' of the Conference on disarmament what came with the display.
  Seem to have a problem SERIOUSLY, windows system seems corrupt, the bar menu (close, minimize, maximize) windows are all covered in a black bar, colors are corrupted, I tried uninstall and I get a message: description number 0 x error 80004005 Unspecified, Setup will end now.
  Help!

  Hi Miriam,

  I understand that you are having and issue with viewing software on your desktop HP Pavilion HPE h8-1170uk.

  If you follow this document that it should help to restore windows back to known working configuration.

  Please read the entire document on restore Windows to an earlier point before doing anything on your PC.

  http://support.HP.com/us-en/document/c01835735

  Please do not hesitate to contact me if you have any other questions

  Thank you

• HP Pavilion 23xi Underscanning resolution

  I recently bought the 23xi Pavilion and I liked the quality and image clarity, but some games like Crysis Warhead had some image lag issues. I thought that it had to be a way to solve this problem. I went to the HP site and searched the 23xi and found the driver of 23xi Pavilion. After the installation of the monitor underscans now the visible image by about an inch on the top, left and right of the screen. This creates a black border that now spans the length of each side.  I thouhght perhaps was the Catalyst Control Center, but no option of scaling are allowed (other than the GPU scaling to enable/disable). I thought then that maybe my VGA cable is the cause, I tried an HDMI cable without change. I thought then that maybe it was the software, hooked my laptop still no change. My last thought was that perhaps a scaling option had checked on the monitor, I can see an option of scaling for the monitor, but it is not selectable in any form. Also I am running Windows 7 x 64 with a Radeon HD 6970.  Y at - it someobody who can help me to fix this, please?

  I thought about it. It is not underscanning. This is part of the bezel and I never noticed until now lol

• HP Pavilion 23xi stuck button

  Several months ago I had my Pavilion 23xi monitor, and until now, I was happy with it. However, I'm back after about a week, and the source control button seems to be stuck. The control of Source code on the OSD screen is on the display, and the selector is constantly moving upward. I have found I can hold another button to stop it temporarily, but she starts just to the top once again as soon as I release it. Additionally, none of the buttons work except OK. I checked, and the real source control button is not depressed and can be pushed as easily as the other buttons. Does anyone know a fix for this problem?

  Well, apparently it just fixed itself. Alrighty then.

• Unable to Scan to the computer after downloading macOS Sierra. Is this a software problem?

  How can I scan from HP Envy 4500 to computer after downloading macOS Sierra?

  Hello wdemetris,

  Thanks for asking for scanning helps here in the Apple Support communities. I understand how it is important to have access to your scanner and am happy to offer help for this.

  As a precaution, we always recommend that you have backups to make sure that all your data is safe. You can perform a backup using Time Machine and an external hard drive. Use this article to help make a backup of your Mac: use Time Machine to back up or restore your Mac.

  Then, in accordance with article help: printer and scanner for Sierra, El Capitan, Yosemite, and the Mavericks macOS software, the HP Envy 4500 e-all-in-one is supported for printing and scanning. The drivers must be installed, but if not, if it please go to the App Store and check the updates tab to see if there are updates for HP. If there is, please install.

  If you have only general questions about how to get your updated scanner in place or how to scan pictures, please check out these two articles: macOS Sierra: implement a scanner & macOS Sierra: scan images or documents. If everything is configured correctly and you still have problems scanning, please visit this help article: macOS Sierra: scanning troubleshooting.

  Thanks again and have a great rest of your day.

• My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

  Hello brooksm549,
  Thank you for using communities of Apple Support.

  I got your message which, since updating your iPhone 6 to iOS 10.0.2 your iPhone stops when it is 40% and the power to empty very quickly. I understand your concern with the iPhone turn off and drains the battery. I recommend you to review the use of the battery to see what app contributes more to the battery drain. The following article will provide you with steps on how to check the use of the battery:

  On the use of the battery on your iPhone, iPad and iPod touch

  When you know about the soft uses more battery, you can change your settings in order to optimize the battery life:

  Maximize the life of the battery and battery life

  Best regards.

• MacBook Pro display problem

  Hello members of the community.

  As of recently, I have noticed some glitches when feeding on my MacBook or awakened from his sleep.

  The colors are distorted, usually with pink, green, or yellow blobs. Blobs cannot entirely replace the colors, they appear to be contained in a element would normally be. For example. the menu bar will be partially pink and white, but pink does not leave the menu bar in this area, and the Office has green lines on it.

  I tried to take a screenshot, but the problem resolves in about 20 seconds, but it's a recurring problem.

  It happens when I wake up, connection or not. I had also certain powers serious and problems of performance, such that my MagSafe LED would not illuminate when plugged on rare occasions, fan could turn unnecessarily, graphics performance were SUPER slow, and the health of my battery was running out quickly. I actually ran a report on the system at 2 different times and my quality of full load is depleting of 1.2% per charge cycle, which is very worrying. I went from 6281 mAh mAh 6138 maximum capacity after two cycles of load. I'm tracking closely it because at this rate, my battery will survive only at load cycles about 150 instead of the 1000 expected, gives me the idea that this could very well be a bad battery. The computer is also warm to the touch while you sleep, not connected to the power supply. I NAP active but even taking into account should not be hotter my iPhone did the same thing.

  I have reset the SMC, and it solved a couple of problems. The charger works fine now and my performance improved considerably (which made me feel better, either it is a high-performance laptop, a 11-inch MacBook Air should not he surpass), and battery life has improved. I feel even if it uses a lot of power in his sleep. Maybe I need to turn off the NAP and see if that makes a difference. The graphic bug still persists however, and I don't have enough time to see if the max battery is depleting again.

  In regards to the bug, is there something that can be done? Basically, I want to assure you that I took all appropriate measures or if someone else has this problem to see if it can be software related instead of my computer.

  I have the entry level MacBook Pro with the retina, last generation.

  Any constructive contribution welcome!

  See you soon.

  -adreaux

  Hello bernardn753,

  After reviewing your post, it seems that you are having problems with the screen showing strange things on it. Looks like you already have a troubleshooting. I recommend you read this article, as reset NVRAM would be to reset your screen resolution settings that should help.

  How to reset the NVRAM on your Mac.

  Thank you for using communities of Apple Support. Good day.

• with IOS 10.0.2 - 5s iphone Bluetooth problems

  Since upgrading ISO 10.0.2 my M50 from PLT Plantronics (helmet unique headset) do not reliably connects with my iPhone 5 more. I have to go to the settings, activate bluetooth turned off/turned on, touch the device on the bluetooth page, etc. Once it connects successfully, it will reconnect (if I turn off the headset and turn it back on) for a short period. The next day he does not connect itself but I play with bluetooth on the iPhone again.

  It has always worked perfectly before the 10th of IOS.

  And, as I noticed others mentioning, the volume is much lower with IOS 10. The maximum volume is much lower. I can barely hear it now, more normal background noise, while driving.

  I did:

  Forget this device for the PLT M50 and paired again (several times)

  I did a Reset Network Settings

  I don't know what else to do - but it's a 10.0.2 IOS issue.

  Hello AppleUser2k,

  Please ask questions about your problems of connection between your iPhone and your Plantronics headset since you upgraded to iOS 10. I understand how important it is to have your Bluetooth devices connect with your iPhone with reliability. Here's what I recommend.

  The first thing we want to make sure is that all your data is safe. You can perform a backup in iCloud or iTunes using this article: backing up your iPhone, iPad, and iPod touch.

  Once your data is safe, try the troubleshooting steps in this article to help: get help to connect a Bluetooth accessory with your iPhone, iPad or iPod touch device should also check with the manufacturer that the device has all the drivers and firmware to work with the new version of iOS.

  If you have checked everything and that you have installed the latest firmware or driver and always are problems, please be aware of your surroundings when you encounter these problems. If you can isolate the time or location, you see the problems, you can isolate the cause. You can even see this help article to ensure that you are not affected by outside interference: the potential sources of Wi-Fi and Bluetooth.

  Thanks again and have a great rest of your day.

• Problem after update 10.0.2 iOS iPhone touchscreen

  After I have updated to iOS 10.0.2, I noticed a problem with the touch screen. Using the position of the image on the right side, near the corner, the toushscreen does not work.
  For example: when you use the keyboard, I can't type the letter 'P', have trouble typing BACKSPACE. Using the Contacts app, I can't scroll through using the alphabet bar.

  Do what idea of the problem?

  Kind regards!

  Hi fabriciorela,

  Thanks for the upgrade to iOS 10! I understand that the right of your screen is unresponsive to the touch. You can try the steps in this link to fix the problem. If the screen of your iPhone, iPad or iPod touch does not respond to touch

  If it does not help the problem, try to restore the device to factory settings. I would like to backup your important data first.

  The backup of your iPhone, iPad and iPod touch

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  Please use the Apple Support communities to post your question. Let us know how it turns out. Have a great day.

• Bluetooth connection problem iPhone - audio system Nissan after upgrade iOS10

  After iOS10.0.2 iOS9 on iPhone upgrade, I got a cordially problem receive calls raise Nissan car audio.

  I can make a call without any problem. Bluetooth connection is stable. I can download address book e.t.c. But I can't receive a call. I see the incoming call on the radio shows. After pressing the button "answer" on the car Audio System, audio between iPhone and Audio streams car breaks down.

  But the cellular connection remains active. I need to rotate the audio output on the screen of the iPhone car for iPhone and back to the car. After that, I can continue my call via the car radio.

  Thanks in advance

  Hello StasV,

  Thank you for using communities Support from Apple. I know having a problem with calls on your iPhone in your car, it's not what you expect. The good news is that these steps will be useful for your problem of phone calls while using the bluetooth in your car. Go to settings > general > accessibility > routing of Audio calls and the value headset/Bluetooth Headset and retest your question.

  Audio routing call - the iPhone user Guide
  Help to connect your iPhone, iPad or iPod touch with your car radio

  See you soon!

• 2 iphones on one iTunes, problem of photo icloud account

  OK, my brother-in-law just updated its OS on his Iphone. He shared an Apple ID with his wife, who has his own iPhone. They all have two backup only in iCloud. His problem is that his wife photos are now on his phone. How can he fix it?

  Get its own identifier Apple- create and start using a Apple - Apple Support ID

• Problem activation ISO 10 September 2016

  After my Ipad iOS 10.0.2 update I could not activate because it says I am not access with the original Apple journal. Makes no sense. I bought the new Ipad in seven of 2013 Dabs.com. She has been linked to my Apple account 10 days ago (I deleted my profile by own Apple support Web site suggestion as a way to fix my problem, the other restoration/upgrade to the Ipad with ITunes update). I contacted the support of Apple (I have two numbers in case Apple). Asked Apple support to provide a proof of purchase I made. Told me now the reception that I provided does not correspond to my Ipad, but Apple isn't going to help with all the details to help to regularize the situation. The Ipad is mine and well was linked to my account from the date of purchase in September of 2013 until I removed it at the suggestion of site specific help from Apple. I now do not have access to my ipad £460 for more than 10 days and have lost money and time talking to 4 different cooperatives of Apple, after 6 calls and none seem able to deal with a ridiculous situation. Alexandre Vitorino (Apple) seems to have the best handle on weird how this situation is. Please can someone fix this? A software update on an Ipad that I own shouldn't stop me using it and then force me to prove that I admit actually before I use it again! I'm a professional businessman who uses it for meetings of the Council. I have a receipt for my camera and get treated like a kind of criminal.

  My sincere sympathy for those who can't find their original receipt or forget their original log-in Ipad because Apple does not help, you and your Ipad will be also useless mine is currently!

  If you are in the same situation please confirm to this post. I can't be alone, if she feels like it!

  Post edited by: cibble10

  Lock activation occurs when the ID of original Apple blocking it does not match with your current Apple ID.

  Until you can bring a receipt valid from an Apple reseller or authorized, it's nothing you can do.

  BTW, the polling stations in this Apple-owned forums is prohibited. You can review the terms of use.

• Anyone know how to solve my problem? I can't import my photos from Iphone to computer. Sign says: Photos in the camera cannot be imported because the IPhone is locked with a password or read. My phone is unlocked. I've tried everything

  Anyone know how to solve my problem? I can't import my photos from Iphone to computer. Sign says: Photos in the camera cannot be imported because the IPhone is locked with a password or read. My phone is unlocked. I tried everything, every single idea. Without success! Any other idea?

  For example, you specify that the device does not display the lock screen, correct? Do you use Touch IDS? If so, try to put your finger on the device to see if it's what he wants.

  See you soon,.

  GB