May my end 2011 MBP running 10.11.5 El Capitan using Back to My Mac to see my 2006 Mac Mini running Snow Leopard 10.6.8?

Similar Questions

• Comply with the requirements for El Capitan if I have a Mac Mini MTN. Lion and 2 GB of memory running with a 2.4 GHz Core 2 Duo?

  Comply with the requirements for El Capitan if I have a Mac Mini MTN. Lion and 2 GB of memory running with a 2.4 GHz Core 2 Duo and 1.07 GHz and 3 MB of L2 Cache bus speed? Recommend - install you more memory and if so, why?

  1. Yes.

  2. Yes. Any newer version of Mac OS X 10.6.8 is likely to be sluggish on only 2 GB of RAM.

  (141471)

• Running Snow Leopard and Mavericks, MBP 2009

  I have a MacBook Pro mid-2009 (4 GB of RAM, 2.26 GHz, 160 HD) which is running Mavericks (10.9.5). I have problems with iTunes (12.3.1) find my library since I copied the files to my Time Capsule to an HD station. I have researched and followed the instructions, but my library, but cannot be found on the disc, and also he will not find on my Time Capsule or other.

  I thought I would downgrade to Snow Leopard, but opening (3.5.1) should Mavericks. Now I think running two Mavericks for when I need to use Aperture and Snow Leopard for iTunes and most everything else, because it seems to play more enjoyable with my MacBook.

  How would be better in this respect? My Aperture library and iTunes are on a 4TB post HD all is supported with a second to 4 post HD. I'm a newb when it comes to such things. I read that "performing two partitions or drives multiple is the best way to handle this and provide most compatibility as opposed to virtualization". Someone said as I could "boot from the DVD and use disk utility to create a new partition on the internal drive. Install Snow Leopard. You can start and then in what operating system never desired. "I guess that means that two partitions on my hard drive or an OS on my HD and the other on the ext HD.? If so, what would be better? Could I put the Mavericks on the HD Ext. and Snow Leopard on my MacBook HD?

  To complicate matters, I live in America where Macs are rare. I know that in my city of 1 million a Mac tech. My Spanish is good, but I don't speak well, even in English, computers and looking for advice or ideas before you have the tech to do anything, thinking that he can just do everything is faster and more convenient for him. I also wonder if I can do it myself, since I have backups Time Machine going back to before I installed the Mavericks, but would probably have a tech do it anyway. I just want to know what precisely I would ask him to do.

  As you say, your options are either have multiple partitions on your internal drive OR install the OS 2nd on an external drive.

  [EDIT]

  If you have multiple partitions on your internal drive...

  • You can run lack of disk space on one or two partitions according to what you save on partitions
  • It is convenient because you do not have to carry another device with you.
  • If a disk fails, you lose the two partitions

  If you install 2nd OS on an external hard drive...

  • you will have more disk space for the two operating systems work with
  • less convenient, because you will need to have the external drive to use OS 2

• Use two monitors on Mac Mini end of 2012

  Hello

  I am currently using only a single monitor (A Dell S2340M 23 "") with my Mac Mini end of 2012 (with these ports: Mac mini (end of 2012): external ports and connectors - Apple Support), and I am interested in adding a second monitor, something around the same size as my current. How to connect two monitors on my Mac? Thanks in advance.

  The support for the Mac Mini shows article (end of 2012) and details which ports can do.

  So you would probably need to get an adapter Thunderbolt using a second screen, seems.

  See the items listed to connect to the Thunderbolt port in the link you posted. I have the same

  link to my favorites for more than a year...

  I have an i7 Mac Mini end of 2012, using only a screen Apple Cinema (aluminium).

  Another option would also buy a bolt of lightning multiple port dock. Some allow others

  products and ports in double. (Upward to 12 points, USB3.0, Thundebolt, etc) not cheap. A

  A few screens can allow a Garland; Note looks like a bolt of lightning MiniDisplay port but can

  not act like one. Adapters can allow minidisplay run Thunderbolt. See supported

  Article and then see the page of the Apple store in graphics cards.

  http://eShop.MacSales.com/shop/Thunderbolt/

  OWC has also an external optical drive with several ports integrated (with additional HARD disk).

  Good luck!

• New iMac and Macbook Pro to run Snow Leopard?

  Hello, I just record music using Garageband that runs on Snow Leopard. My old 2008 iMac is dying and I need to know: what is the newest iMac or Macbook Pro which will be held in Snow Leopard? Thank you!

  Click here and check; Moreover, any Intel Mac can run Mac OS X Server 10.6 within an emulator such as VirtualBox.

  (143883)

• Best SSD for end 2011 MBP?

  As the title suggests, I'll be in the market to improve the speed of my MBP late 2011. I upgraded the RAM 16 GB, and it made a wonderful difference. I record music on my computer, and I'd appreciate a reliable car with good read/write speeds.

  I looked in the EVO of 850 Samsung 500 GB drive, read some reviews and it seems most often receive positive responses. Are there any problems with it I should know about, or is there a better car for about the same price?

  Also, I read that there are sometimes problems with the implementation of a new drive from a backup. Can someone refer me to a good guide that clearly lists the steps to set up a new drive from a backup? I've stuck with OSX 10.9.5 and want to keep the same configuration, just with a faster drive.

  Thanks in advance for your advice!

  I use Crucial in my MBP in early 2011.  OWC (macsales.com) sells compatible devices.

  Samsungs are actually show several questions in these forums... firmware update is needed to make them fully compatible mac apparently.  Or it could just be that Samsungs sell as much as even small-ccurrence-of-problems appear more often.  But I'd still go to OWC first if my Crucial current failed today (much too early, according to all the life expectancy estimates).  If I wanted just a new smile, I'd be probably Crucial or OWC.

  You can make the transition easier... Download CarbonCopyClone ($40, bombich.com) and an external box or connect the kit to copy your current internal to the new SSD.  Then do the surgery after the SSD will start to your satisfaction.

• Can I run Snow Leopard with the latest version of VMware Fusion on a MacBook Pro for mid-2012?

  I have a Snow Leopard install disc (version 10.6.3), but my MacBook Pro for mid-2012 allow me to install it.  Is this possible using the latest version of VMware Fusion?

  If it is a commercial version of Mac OS X 10.6.3 Snow Leopard Server not Client, then Yes.

• Fusion 5: It runs Snow Leopard Server as a guest operating system?

  Fusion 4 works Snow Leopard Server on my Mac the Lion 10.6.9.  Fusion 5 it will work as well?

  I really look for this before posting.  Thanks in advance!

  With the same requirements for licenses as 4, Yes.

• Fusion running Snow Leopard has invisible virtual ports for wireshark

  Win XP SP3 molten can surf the net through the mac airport to be filled or thin nat mode. the mac has a static ip address. the windows is set to dhcp.

  ifconfig on the poster for the mac

  EN1: inet 192.168.1.43 netmask 0xffffff00 broadcast 192.168.1.255

  VMnet1: inet 172.16.193.1 netmask 0xffffff00 broadcast 172.16.193.255

  VMnet8: inet 172.16.143.1 netmask 0xffffff00 broadcast 172.16.143.255

  ipconfig on windows shows

  The connection-specific DNS suffix. : Home

      IP Address. . . . . . . . . . . . : 192.168.1.42
      Subnet Mask . . . . . . . . . . . : 255.255.255.0
      Default Gateway . . . . . . . . . : 192.168.1.1
  

  When the ipconfig command is released and renewed merger network card settings are replaced by NAT, then ipconfig shows

      Connection-specific DNS Suffix  . : localdomain
      IP Address. . . . . . . . . . . . : 172.16.143.132
      Subnet Mask . . . . . . . . . . . : 255.255.255.0
      Default Gateway . . . . . . . . . : 172.16.143.2
  

  This shows that the virtual machine is now through the subnet of Wireshark vmnet8 however does not reveal vmnet8 and just en0 - en1 and en1 is getting all the traffic. Why no vmnet8? Why vmnet8 receives a routable address? It should not be one of those numbers 192.xxx.xxx.xxx or non-routable 10.xxx.xxx.xxx? And even if windows is bridged and use 192.168.1.42, little snitch on mac keeps asking if vmnet-natd(8) can talk to the net, so I know that it is active.

  I can see the packets destined for the ip address of windows but it is mixed with the traffic destined for the mac (I know because they both use the same airport) but it's all exceed them en1.

  (btw, I don't understand why the gateway in windows is not 172.16.143.1 but plutot.2 - after all the windows box to not talk to vmnet8?)

  Why vmnet8 receives a routable address? It should not be one of those numbers 192.xxx.xxx.xxx or non-routable 10.xxx.xxx.xxx?

  172.16.143.132 is a non-routable address.  Take a look "3. Private address space' in the document RFC 1597 - Address Allocation for Private Internets.

  (btw, I don't understand why the gateway in windows is not 172.16.143.1 but plutot.2 - after all the windows box to not talk to vmnet8?)

  Except for VMnet0, the default value for the last byte is always 1 for all other VMnets on the host and, therefore, the last byte of a IP address of gateway with a VMnet NAT in the default values of comments 2.  These are encoded in the VMware Virtual Network Infrastructure but can be easily changed in the virtual network Editor.  Oh, sorry, it's true that VMware has not provided users of VMware Fusion with a publisher of network virtual as in VMware Workstation or even their free VMware Player!   This means that any changes made to the VMnets must be done manually.

• Can I run the Mavericks and Snow Leopard on my MacBook?

  I have a mid-2009 MacBookPro (4 GB of RAM, 2.26 GHz) running Mavericks 10.9.5. I wish I never upgraded to Snow Leopard and was planning go back from iTunes (12.3.1) is now unable to find my library when I copied the files to my Time Capsule to a new HD post with the intention that the HD Ext. would be the new home for my iTunes library. I researched how to change the location of the library and followed the instructions but no luck. Many people, including my local tech, have suggested that this is because the Mavericks and editions of the latter to iTunes doesn't play well with my old MacBook and it has been suggested that I come back to Snow Leopard. I'm ready, but use the latest version of Aperture requiring (3.5.1) of the Mavericks, and given that Apple no longer supports opening there is no way to get 3.2.4, which is the last version that can run on Snow Leopard.

  I'd be able to keep the Mavericks and use it only if you use Aperture while being able to install Snow Leopard, and use it for everything? My MacBook seems better to work on Snow Leopard but opening works well on the Mavericks.

  I suppose that if I went down to iTunes 10.7 it would automatically get upgraded to the top without asking my permission, so there is no interest in any downgrades iTunes and it works on the Mavericks as a possible solution.

  Boot from the DVD and use disk utility to create a new partition on the internal drive. Install Snow Leopard. You can then start in which operating system never sought.

• The best way to install Windows 7, so I can run on my MBP el Capitan end 2011 calyx Point Software?

  How to install Windows 7 so I can run on my MBP el Capitan end 2011 calyx Point Software?

  Please start the Windows installation using Boot Camp - Apple Support .

  The following links should also be useful.

  Install Windows 7 and earlier Apple Support on your Mac using Boot Camp -

  https://help.Apple.com/Bootcamp/Assistant/6.0/

• I have a MBP end 2011 running yosemite which is dead.  How can I migrate (from Time Machine) on a similar MBP (mid-2012).  I don't mind if I lose data on the MBP of the latter.  Essentially, I want my old MBP to take the newest one.

  My MBP end 2011 died.  I want to migrate its content on Time Machine to a bit newer MBP.  Basically the old MBP return to the most recent.  It doesn't matter if the data on the new MBP are lost.  Any help would be appreciated.

  Hello

  Yes you can do it. Pondini (here) has a few options to do.

  You can also try Migration Wizard. See this article. But I'd go with Pondini, the guru of the Time Machine.

• What windows and Boot Camp for MBP 13 end 2011

  I have a MBP 13 end 2011. I want to install Windows 8.1 to launch my CAD software. I use Boot Camp Assistant 6. I run on OS X and have 4 GB of ram. Is this ok or are there other options recommended?

  Models 13 inches have the GPU from Intel. Your Mac has an Intel HD3K. Older versions of the software may perform better, but more recent versions can be slower on older hardware. What is the possibility of using a dual-GPU MBP? The more RAM, the better it is.

• end of 2011 MBP stops when unplugged

  Hello, my MBP end 2011 (on 10.9.5) was most recently at apple, the logic board has been replaced. shortly after that I came back, he began to stop once unplugged. Re-start works, but only for a minute. system report states that, whatever it is the air out here? Sounds like a battery problem, I'm on the original battery, but I thought battery would just shrink, not just stop working.

  Information model:

  Serial number: D8 * LAZ

  Manufacturer: SMP

  Device name: bq20z451

  Pack Lot Code: 0

  PCB batch number: 0

  Firmware version: 406

  Review of equipment: 2

  Review of cells: 158

  Information on this charge:

  Charge remaining (mAh): 6432

  Fully charged: Yes

  Loading: No.

  Full Charge capacity (mAh): 6433

  Health information:

  Cycle Count: 405

  Condition: Normal

  Battery: Yes

  Amperage (mA): 0

  Voltage (mV): 12484

  Parameters of power system:

  Alternating current:

  System timer (min): 0

  Disk sleep timer (Minutes): 0

  Display sleep timer (Minutes): 30

  Wake up on the evolution of the ca: No.

  Wake up to the opening clamshell: Yes

  Wake on LAN: Yes

  Current generator: Yes

  View Sleep uses Sun: Yes

  GPUSwitch: 2

  PrioritizeNetworkReachabilityOverSleep: 0

  Waiting period: 4200

  Standby mode enabled: 0

  Battery power:

  System timer (min): 15

  Disk sleep timer (Minutes): 10

  Display timer (min): 15

  Wake up on the evolution of the ca: No.

  Wake up to the opening clamshell: Yes

  View Sleep uses Sun: Yes

  GPUSwitch: 2

  Reduce the brightness: Yes

  Waiting period: 4200

  Standby mode enabled: 0

  Hardware configuration:

  UPS installed: No.

  Charger AC/DC Information:

  Connected: Yes

  ID: 0X0100

  Wattage (W): 85

  Review: 0x0000

  Family: 0 x 0085

  Serial number: 0 x * 4bd

  Loading: No.

  < personal information under the direction of the host >

  Hello marc cardwell,.

  If your MacBook Pro stops unexpectedly when you unplug your charger (despite correctly recognizing your installed battery), it can help restore his MSC and NVRAM.

  Reset the management system (SCM) controller on your Mac.
  https://support.Apple.com/en-us/HT201295
  

  How to reset the NVRAM on your Mac.
  https://support.Apple.com/en-us/HT204063

  Sincerely

• Early 2011 MBP 15 "dual SSD - lost with boot camp edition

  Hello community!

  I lost my mind with boot camp troubleshooting during the last week. This is going to be confused reading, but I'm afraid I got worse... So please try to face me.

  Starting point - of course I can install Windows 10 on my MBP 2011 early!

  Material

  Early 2011 MBP 15 "with Intel HD 3000 and AMD Radeon HD 6750M

  and the optical drive, replaced by an other SSD with a caddy

  Of course, I didn't have an optical drive on the spot so I realized that I need to install to get the option to boot from USB - I did find. I managed to make a bootable USB from. ISO with UNETBOOTIN. First of all, I got score of huge problems with that I finally managed to Dodge with diskpart - software on Windows Installer USB after NVRAM reset before each attempt to install with CMD + Option + P + R, I had to also remove the OSX SSD during the installation of VICTORY for everything the world some boring as Windows could not update the configuration to start the computer. Unable to continue installation -problem.

  After all:

  -> I managed to install WIN10 on my MBP education

  -> A lot of festivities fun! < 3

  -> After installing the bootcamp drivers all active windows went to "invisible desktop on the left" (I closed the other workstations...) where I managed to lift one of the windows on the central office with lucky and "move" action (I have no idea...)

  -> after reboot apparently drivers Intel HD 3000 went haywire and I got black screen on black with details in black (black screen Uni)

  Conclusion: I try Windows 8.1 (pro) because at least he is supported by my Mac AND it has same installation and should work.

  At one point I tried to use my old drive via USB to install Windows 7 and 8.1 pro

  -> PROBLEM CDBOOT: couldn't find the BOOTMGR

  -> I moved along back USB and WIN8.1

  8.1 Windows Pro was installed easily, with the same procedure. When running boot camp display drivers turns black during the "Intel - graphic" installation period. I can confirmed that starting mode safe mode when the screen works, but I can't install Catalyst drivers-> so I can not play games that was the only reason for dual boot. In addition, there is no sound. So lack of drivers: no picture, no sound.

  There... I think I forgot to say something. I was hoping just that if someone could help me with this problem. I lose my head here. I have not really direction where to go next, but I have a few options I can try after that I understand my morale of my troops.

  1. Remove my boot OS X SSD, switch my SSD Windows instead of him and put my Superdrive. So I would basically just install windows. Earlier, I had 8 windows work via the DVD and bootcamp.
  2. Try to play with the drivers on Win8.1 more
  3. Reinstall windows. There may be something wrong with my. ISO or USB?
  4. Delete the EFI to correct CDBOOT?

  Thank you in advance!

  You must use Bootcamp Assistant for everything, including the form/partitioning implementation and the removal of partitions...

  I would like to reformat the second SSD (on which should be installed W10) with diskUtility. Then start bootcampassistant on SSD1 and do all this.