Can I run the Mavericks and Snow Leopard on my MacBook?

Similar Questions

• Can I put the Mountain Lion Snow Leopard?  Where can I download Mountain Lion?

  Can I put the Mountain Lion Snow Leopard?  Where can I download Mountain Lion?  I don't wan to upgrade all the way to El Capitan.  Some of my software may not be compatible.

  http://www.Apple.com/shop/product/D6377Z/A/OS-x-mountain-lion

  You should have a complete backup of your system before performing an upgrade. Given that, we risk minimum trying to El Capitan before adopting it. Instead of spending $20 on the Mountain Lion, when El Capitan is much higher.

  There are not many apps running in Cougar and El Capitan.

  Compatibility lists: http://roaringapps.com/apps

• Can you run the Interface of Inspection VBAI only once and then once more by a guest user?

  Can you run the Interface of Inspection VBAI only once and then once more by a guest user?

  I don't think I understand what you are trying to accomplish. You can connect a button on the front of the smart camera and trigger each acquisition. In VBAI check the triggered Acquisition under the tab trigger for the step to acquire Image (smart camera).

  Your smart camera is hooked up to a monitor? Is there something that you must do in LabVIEW that you can't do in VBAI about the step of user input?

• I can not run any .bat and cannot open the cmd prompt

  I can't run the files .bat and most horrible thing I've ever met is a missing cmd.exe. It's starts with me trying to play Assault Cube, which must run on a .bat instead of .exe like other games. But whenever I try to open a batch file, it keeps gives an error "Windowscannot find"file to the .bat file (directory)". Make sure you typed the name correctly and try again. "Each. Time.

  So, as everyone will do, they search the Internet. I would like to do is short.
  A virus? No, my laptop is clean after scanning with Malwarebytes. You have to open as an Admin? Yes, but I got an error saying "this file does not have a program associated with it for performing this action." Please install a program or, if such is already installed, create an association in the default programs control panel'.» Tried to do? Well I think that it is impossible for the command prompt to be included in the default values list. I tried open the command prompt by typing "cmd" and pressing on enter the Start Menu? So many times I've tried, but it's endless. Whenever I do this, the command prompt displays upward and 0.5 seconds later, it's farm/accidents/output by itself. Now 0.1 second.
  So, I thought on this subject and I typed in the start 'Command Prompt' Menu. When I see the icon, it's like the path or the file is missing of some sort. So I click right on the top that says "Command Prompt" and click on the option "open the file location, which made me feel weird as there should be no such thing as an option for a file that is part of the folder system32." I was directed to ' C:\Users\Acer\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Accessories'.
  I found a shortcut to the command prompt, but I checked the file in "position to open the file", the location of the file is not displayed (opens in a new window as every time it is done). Also the guest who said when every time the .exe is missing is not indicated where we gave options to remove the .lnk. But it shows same either. If the file should be there, but it seems that the cmd is absent when I searched in system32.
  So, I'm at the blunt end to try to do things and to rely on some other cmd work and one question remains to ask with your opinion, are there links to download Microsoft cmd or is it even safe to use the another cmd PCs or by downloading?

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  Hope this information is useful.

• most of my desktop icons present in the form of PDF files and I can't run the shortcut.

  As soon as I install Acrobat Reader DC most of my desktop icons show in the form of PDF files and I can't run the shortcut.  When I hit the icon (shortcut) I get an error msg saying it not good pdf file

  Hi kenc10782958,

  Please see this KB Application, file icons change in Acrobat/Reader icon for the troubleshooting steps.

  Kind regards

  Nicos

• Currently, I run the design and the Web Premium CS6 on a first generation MacBook Air and want to buy a new MacBook Pro. How will I know if I can install my programs on the new Adobe computer? Because I know that there is some sort of limit.

  Currently, I run the design and the Web Premium CS6 on a first generation MacBook Air and want to buy a new MacBook Pro. How will I know if I can install my programs on the new Adobe computer? Because I know that there is some sort of limit.

  Also, I had to install the software twice on my computer before because I had to restart the computer. I don't know if this affects the limit.

  You are allowed to have two facilities activated, so it shouldn't be a problem with facilities to work on both machines.  If by chance you somehow tied up two activations for a machine you can have Adobe support help solve this cat thrue.

  Serial number and activation support (non - CC) chat

  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• break-in Mavericks in Snow Leopard

  In April, I thought I spoke to by phone 6 Fusion vmware to virtualize my macbook 2009 end pro under snow leopard to a whole new macbook pro mavericks running by linking them with an ethernet cable after the installation of vmware.  The idea is that the machine of the snow leopard from 2009, with all its files and programs (so no need to reinstall the programs), virtualized on a brand new macbook pro mavericks, and I still have a 6 vmware fusion bookmark to a page which, in April, showed a diagram to connect two computers with a cable and saying it will now work with Snow Leopard to the Mavericks.  But now the link takes me to 7 merger with no diagram or information. I'm pretty sure that you can virtualize w / vmware an old windows xp pc to a new macbook pro installed Mavericks, but, as I said, since April, I really thought you could w / snow leopard too.  If no, what with snow leopard "Server" in a way that allows me to do what I want, without having to reinstall everything old software on the new macbook pro?

  Thank you.

  Stu22

  Hi Stu,

  SUMMARY:

  I have a number of programs that will not run on anything whatsoever beyond Mac OS X 10.6 Snow Leopard. I need to open old files, data search, etc. These applications include Eudora (e-mail), Microsoft Office 2004 (which can open old Word and Excel files correctly), X (graphic) of the canvas, 4 final (musical notation) and more. I have run these programs to a guest from VMware Fusion running Snow Leopard Server.

  Here are a few thoughts that may help you when you are considering what to do:

  SNOW LEOPARD SERVER ON YOUR CLIENT VMWARE, NOT SNOW LEOPARD "CLIENT":

  Snow Leopard Server is running as a guest virtual machine but not the regular 'customer' of Snow Leopard version. The license for the 'client' (non-server) Snow Leopard version does not allow it. In addition, VMware imposes this restriction and allows only of Snow Leopard Server. There are ways to hack around the restriction, but why bother when Snow Leopard Server is so cheap? (See below).

  BUY SERVER SNOW LEOPARD FROM APPLE FOR $20 TODAY:

  You can always buy Mac OS X Server 10.6. 3 REV 1 (Snow Leopard Server, unlimited clients license). The price is $ 19.99. Order it by calling the Apple Store at (800) 692-7753 and ask for part MC588Z/a number. not all sellers will recognize what you want and will be able to find it, but don't lose heart - try again. I called and checked that it is always available since last night, November 26, 2014. It comes with Installation and Admin Tools DVD.

  ALL YOUR PROGRAMS RUN ON SNOW LEOPARD SERVER:

  Any program that runs on Snow Leopard 'client' will run under Snow Leopard Server. If you ignore the server components, in fact, there is no real difference.

  YOU WILL NOT BE ABLE TO CREATE A HOST SERVER SNOW LEOPARD ON THE NEW MAC:

  Some new Macs have problems installing Snow Leopard Server from the installation DVD in a VMware virtual machine. Basically, the Mac OS X 10.6.3 installer DVD does not contain drivers for the latest Mac hardware. If you have problems, you may need to create the virtual machine of Snow Leopard Server comments in VMware on an older Mac, install the latest Apple updates (for 10.6.8 version), and then copy it to your new computer. You must run the Apple updates first on the old machine, so that your comments of Snow Leopard Server will get the drivers it needs to run on your new MacBook Pro.

  CREATE THE SERVER SNOW LEOPARD ON YOUR OLD MACBOOK PRO CLIENT?

  Maybe you have a copy of VMware Fusion version 5 running on your old MacBook Pro 2009. VMware Fusion version 5 is the latest version of the Fusion that runs under Snow Leopard. Create new comments of Snow Leopard Server on the old MacBook Pro, update the customer newly created to 10.6.8 on the old MacBook Pro version, then copy the .vmwarevm file to the new MacBook Pro. (Do not forget to delete the comments on the old Mac after copy you it to the new Mac, if you plan to use the Migration Wizard).

  WHAT IT TAKES TO RUN ON YOUR NEW SNOW LEOPARD SERVER COMMENTS:

  If it were me, I would first ask myself, ' do I really want my EVERYTHING old 2009 MacBook Pro running in a VMware guest? My answer would be, "certainly not!" I would just install these applications relatively little (and associated data files) that will not work on the new MacBook Pro with the Mavericks (or Yosemite). I named a few examples of applications in my SUMMARY, above. From my own experience, I set up new comments of Snow Leopard Server manually - install the applications 'fresh' and then copy the data files on the accounts on the comments of Snow Leopard Server. Yes, this means the set up the preferences for each application, but it is clean and it works. For the rest of your MacBook Pro 2009 applications, get the current versions and run them on your new MacBook Pro "native". Create VMware Fusion folders shared to move files back and forth between your new MacBook Pro (Mavericks/Yosemite) and guest of Snow Leopard Server as needed.

  MIGRATION-RELATED ISSUES:

  Let's say you want to move the entire 2009 MacBook Pro to a guest of Snow Leopard Server. Frankly, if it were me, I manually install all applications and copy all the data. Certainly, it would take a lot of time and effort, but it's the safest way to give a satisfactory final result.

  An automated approach would be to use the Apple's Migration Assistant. My experience with the Migration Wizard was not good. Whenever I tried Migration Wizard (with real Mac!), there were problems. I hope that your experience will be better; in fact, much better (eeek!).

  FIRST MAKE A BACKUP OF THE FILE NEWLY CREATED SNOW LEOPARD SERVER GUEST!

  If you start over, why go through the hassle of installing Snow Leopard Server and apply all the Apple updates, when you can just copy the file .vmwarevm to a backup first? Hello? (If something is wrong, copy the backup file and try again.)

  A good thing: If you have the time and patience, you can try different approaches to see what works. If something does not work as you like it, remove the VMware client and try something different. Here are a few things to think about...

  HOW TO MIGRATE YOUR MACBOOK PRO 2009?

  Let's say you have decided to migrate your 2009 MacBook Pro set to a Snow Leopard VMware guest. Suppose you have created a guest of Snow Leopard and it works now on your new MacBook Pro. Here are some considerations and approaches:

  * USE CARBON COPY CLONE TO CLONE THE MACBOOK PRO 2009 TO AN EXTERNAL DRIVE?

  It's a good approach, but whatever you do will be VERY slow. Your MacBook Pro 2009 is compatible Firewire and USB 2.0. Your new MacBook Pro supports USB 3.0 (also 2.0) and Thunderbolt.

  FireWire is reasonably fast, but I've never seen an external Firewire drive which also has USB 3.0. External FireWire drives seem to have USB 2.0 only, which would be VERY slow attached to your guest of Snow Leopard Server. You can try to use a Thunderbolt/Firewire interface, but then you would have to treat it as a shared folder in VMware and exploring uncharted territory when it comes to file copy using Migration Wizard.

  In addition, I read complaints about the reliability of the Apple's Thunderbolt/Firewire interface. Maybe the problems have been fixed by now, but I don't know that I would trust that I could get a reliable copy of something far greater than a Mac together.

  * USE CARBON COPY CLONE (OR DISK UTILITY) TO MAKE A DISK IMAGE OF YOUR MACBOOK PRO 2009 FILE?

  An advantages of a disk image, it is that when it is copied to your new MacBook Pro, you can try to get Migration Assistant to work in different ways, based on conservation of the Snow Leopard Server prompt if you want to erase and start over. It will take a lot of disk space, however.

  You still have questions and a few tests before. You could get a Thunderbolt/Firewire interface, put your 2009 MacBook Pro in target disk Mode and use Carbon Copy Cloner or Apple disk utility to create a disk image file of it on your new MacBook Pro. (I would use CCC).

  The disk image and the host VMware files can be very large. You have enough disk space?

  You can create a disk image of the 2009 MacBook Pro on an external drive. Use Carbon Copy Cloner (or disk utility), but keep in mind the performance and reliability issues I described above.

  * RUN ON ETHERNET MIGRATION ASSISTANT?

  You alluded to this approach in your original post. Here is a link to a web page from Apple describing the process. Again, I think you will be pioneer territory unexplored here for the rest of us. Good luck! :-)

  http://support.Apple.com/en-us/HT4413

  If you decide to try the approach of Ethernet, then think about what follows:

  -Use Gigabit ethernet if you can. Otherwise, connect the two Macs. If you do not, copy speeds will be very slow.

  -You will probably need Network Adapter of the client server Snow Leopard VMware (VMware guest settings) in Bridged Networking mode.

  -If you connect the two Macs, you have to give (dedicated) fixed IP addresses on the same "subnet". It's three addresses IP - one for the 2009 MacBook Pro, one for the new MacBook Pro and the other for the Snow Leopard Server prompt. Go to the network settings in their respective system preferences. Don't forget to write their first original settings and put things back once the migration is complete.

  Common example IP set for you to use:

  192.168.0.250, 192.168.0.251 and 192.168.0.252; Subnet mask: 255.255.255.0 router (gateway): 192.168.0.1

  192.168.1.250, 251, 252; Subnet mask: 255.255.255.0 router (gateway): 192.168.1.1

  10.0.1.250, 251, 252; Subnet mask: 255.255.255.0; Router: 10.0.1.1

  I hope you have a lot of time and patience. Happy troubleshooting! Good luck!

  Post edited by: vmxmd
  Re-read the post and fixed the truncated sentence.

• G5 Dual-Core Intel Xeon 2.66 performer 10.6.8 can I upgrade the Mavericks

  I am the owner and working on a Mac G5 Dual-Core Intel Xeon 2.66 GHz running 10.6.8 can I upgrade the Mavericks?

  You need to get your story straight before we can help you.

  There is no such thing as a Mac G5 Intel Xeon.

  It's a Mac G5 which has a PowerPC processor or it's a Mac with an Intel Xeon.

• J6450 will not scan since the upgrade to snow leopard

  My J6450 will not scan since the upgrade to snow leopard. I can print fine but when I try and scan is says sorry, scanner could not be initialized (Scanner not found.)

  You scan the front of the unit?  The software included in Sl does not support that.  Also note the HP Scan Pro included in the 10.5 software will not work with 10.6.  The 10.5 software and delete the print queue.  Make sure your 10.6 is update 10.6.1 and go here to download and install the HP software for 10.6 and Setup for your J6540.  You should be able to scan after that.

• CS4 to new MacBook Pro, running the Mavericks OSX but no disk drive

  I have CS4 installed on a MacBook Pro running OSX Lion; I now have a new MacBook Pro running OSX Mavericks and install - I have the original CD but no disk drive on the new Mac - what do I do?

  Help, please

  You can download from - CS4 products download and you can install it on your Mac.

• Updated to the Mavericks and obtain the following: could not initialize Photoshop because of a program error

  Updated to the Mavericks and obtain the following: could not initialize Photoshop because of a program error

  I tried all will set them on the web that I can find is Trash the Prefs, shift when it is open and plug-ins stop, download Java Update, deleted and reinstalled

  My business is to stop can't find a fix from Apple

  Did you run the vacuum after you have uninstalled and before reinstalling?

  -http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  AND JUST FOR MAC USERS - some links 10.9.x

  the following link tells After Effects, but check YOUR permissions.

  -http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml

  -Mac 10.9.4 and OpenCL number https://forums.adobe.com/thread/1514717

  -Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922

  -more than Mac 10.9.3 https://forums.adobe.com/thread/1491469

  - and https://forums.adobe.com/thread/1507936

• Can I run the Microsoft Windows Malicious Software Removal Tool w / Kaspersky AntiVirus with/without any problems?

  Can I run the Microsoft Windows Malicious Software Removal Tool w / Kaspersky AntiVirus with/without any problems?

  Can I run the Microsoft Windows Malicious Software Removal Tool w / Kaspersky AntiVirus with/without any problems?

  Yes.  It is a tool on demand and not in real time thus creates no problems or conflicts with the other application in real time, including Kaspersky Antivirus.

• I bought a used laptop. How can I clean the computer and only the program that the value of the factory. It's a dv4000 HP clubhouse with windows xp

  I bought a used laptop and the previous ovner couldn't remember his password since it's been more than a year she opened a session.  How can I clean the computer and restore it to that only programs that comes with it when buying or facotry settings.  It's a HP Pavilion dv4000 with windows xp?  I have not all discs.

  Go here: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00006110&tmp_task=useCategory&cc=us&dlc=en&lang=en&lc=en&product=464513 and click on the link that best matches your computer (e.g., Presario, Pavilion and HP Compaq Business PC manufactured and sold in 2006 or later).

  Assuming that your computer is 2006 or later, following the links eventually will lead you to the following directions:

  
  

  Reformatting a hard drive should be considered a last resort to solve a problem with a computer system. The hard drive can be reformatted and reinstalled the operating system, using the system PC Suite hard disk recovery. Reformatting the hard drive will overwrite all data on the disk. To preserve the data, back up the data of the user as; letters, leaves of calculation, graphics and emails to an external storage device before you reformat the disk. If the PC does not work in the Windows operating system, see reformatting since the recovery disks .

  Do the following to reformat the hard drive and reinstall the operating system.

  1. Connect the PC to the power adapter.
  2. Close all programs.
  3. Click Start , click principally made programs , select System Restore and click on the PC recovery .
  4. When the recovery options are offered, select the option to perform the Recovery of PC and click Next .
  5. The PC will restart.
  6. When the recovery of the PC of welcome message, click OK to continue.
  7. In the system recovery Panel, select System Recovery . By default, the system will perform a complete reformat and will destroy all user data.
  8. Restart the PC when prompted.

  As alternative method for the steps above, click Advanced Options , select the destructive recovery option and click Next to begin the reformatting process.

  The PC is in original factory State and all data in the system, such as the place and the date must be reconfigured.

  NOTE: any software "trial offer" has been included in the original factory image, it will be reinstalled, but it won't work (the test period will have expired).  If so any trial software is a security antivirus software or others, before connect you to the Internet, you must uninstall (using an uninstall tool provided by the manufacturer if available antivirus software) and then install your own anti-virus software.  So, you should download the uninstallers necessary and installers (or buy the software on CD) using another machine before starting this project.

  NOTE 2: See the following important tips from MS - MVP PA supporter (once the restore is complete, click Start > run > winver > OK to determine what Service Pack you have):

  HOW TO get WinXP SP1 or SP2 fully patched after a 'clean install': http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  1. download & save the installer for WinXP SP3 on your desktop:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5E7...

  [Yes, you can jump SP2 if you run WinXP SP1.]

  2. read & take into account:
  http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/Windows-XP-SP...

  3 connected as long as administrator, if necessary, double-click the saved file to install WinXP SP3.  Follow the prompts. Be patient and restart twice when the installation ends.

  4. make the resolution method 2 here (believe me):
  http://support.Microsoft.com/kb/943144

  5. go to http://windowsupdate.microsoft.com . Install all required software, and then click CONTINUE. Select CUSTOM and scan | Install the critical updates of security offered. Still, follow all the instructions.

  [I do NOT recommend install IE7 through Windows Update.]

  6. make sure that automatic updates is enabled; FC.
  http://support.Microsoft.com/kb/306525

  Other references:

  Free unlimited installation and compatibility support is available for Windows XP, but only for the Service Pack 3 (SP3), until April 14-09. Chat and e-mail support is available only in the United States and the Canada.

  Go to http://support.microsoft.com/oas/default.aspx?gprid=1173 . Select "Windows".
  XP"and select"Windows XP Service Pack 3 "

  5 steps to help protect your new computer before going online
  [installation clean = new computer]
  http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  Measures to help prevent spyware
  http://www.Microsoft.com/protect/computer/spyware/prevent.mspx

  How TO get Windows XP Gold fully patched: http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  1. download & save the WinXP SP2 installer on your desktop:
  http://www.Microsoft.com/downloads/details.aspx?FamilyID=049c9dbe-3b8...

  [Yes, you can jump SP1]

  1B. download & save the installer for WinXP SP3 on your desktop:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5E7...

  2. read & take into account:
  http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/Windows-XP-SP...

  3. administrator, if necessary, double-click the saved file to install Windows XP * SP2 *.  Follow the prompts. Be patient and restart twice when the installation ends.

  3B. logged on as administrator, if necessary, double-click the saved file to install WinXP SP3.  Follow the prompts. Be patient and restart twice when the installation ends.

  4. make the resolution method 2 here (believe me):
  http://support.Microsoft.com/kb/943144

  5. go to http://windowsupdate.microsoft.com . Install all required software, and then click CONTINUE. Select CUSTOM and scan | Install the critical updates of security offered.  Still, follow all the instructions.

  [I do NOT recommend install IE7 through Windows Update.]

  6. make sure that automatic updates is enabled; FC.
  http://support.Microsoft.com/kb/306525

  References with dubbing:

  Free unlimited installation and compatibility support is available for Windows XP, but only for the Service Pack 3 (SP3), until April 14-09. Chat and e-mail support is available only in the United States and the Canada.  Reach
  http://support.Microsoft.com/OAS/default.aspx?gprid=1173 | Select "Windows".
  XP"and select"Windows XP Service Pack 3 "

  Protect your PC!
  http://www.Microsoft.com/athome/security/computer/default.mspx

  Learn how to protect your PC by taking the three simple steps
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=3AD23728-497...

• I can't run the Microsoft Fix it Center. The message I get "error Troubleshotting Wizard cannot continue.

  I just installed Microsoft Fix it Center. Now I can't run the Troubleshooting Wizard which gives?

  Hello
  I suggest you to follow these steps and check if that helps:

  Method 1:
  Try the running System File Checker and see if it helps:
  http://support.Microsoft.com/kb/310747

  Method 2:
  Try running disk error checking and see if it helps:
  http://support.Microsoft.com/kb/315265

  It will be useful.

• I can't run the exe to my computer files.

  I can't run the exe to my computer files. The exe extension does not appear in the options of folder of my c: drive so I tried to add, but it will not save I tried to do a system restore, and even that won't work. I think it's a virus, but I can't seem to run to anthing that might help to get rid of it. Very frustrating... Help!

  I am running Windows XP with service pack 2 on a Dell computer

  Have you tried restoring system from a command prompt?

  Otherwise, restart the computer and start typing the key F8, select Safe mode with command option. If you are prompted to select an operating system, use the arrow keys to select the right pair and press ENTER. Log in as administrator or with an account that has administrator credentials.

  At the command prompt, type % systemroot%\system32\restore\rstrui.exe, and then press ENTER. Follow the prompts to restore your computer to an earlier date.