MBP Late 2011 not too hot
I got a MBP since its release at the end of 2011, and also installed smcFanControl and using a portable fan under it (without plugin in there, so there is still more hot, I have to connect via a usb power cable directly), every time that I watch videos or play a game on it, it goes really hot, as up to 85 ° c , depending on how long I'm doing it for.
I have not tried swapping to a new fan, but I clean up really well a few times, it gets better after that I have remove dust, but not much difference.
Any ideas on what to do?
TKS in advance
You have enough memory installed for the work that do you with it?
You could the battery be replaced? What measures do you have?
Tags: Notebooks
Similar Questions
-
MacBookPro is not too hot. It's time to change the battery? Can I do it myself?
The Mac runs his fans in a feedback loop, based of the internal temperature measured.
If the temperature goes up and the fans are not speed up to compensate, you probably have a hardware problem.
If the Mac becomes too hot, it will make an uncontrolled emergency power off.
EDIT: Replacing the battery is a completely separable question not related to temperature. Is the Samsung phone batteries that catch fire, not Mac.
-
Update card logic 17-inch MBP (late 2011)
Hello world
I thought pass my MBP 17 inches at the highest setting.
Already installed 2133 mhz HyperX 16 GB RAM and Samsung SSD 850PRO
Now I intend to change a card logic than with Core i7 at 2.5 GHz with 8 MB L3.
Currently I have 2.4 Ci7 GHz with 6 MB.
Where can I find a, and will be, I have better performance?
Any suggestions on how I can make my old toy faster?
See you soon!
You have made a mistake with the highest frequency of RAM. The MBP will support 1600 MHz RAM by OWC but no. MBP today is being RAM with RAM at that speed. If it runs at all, it will be clocked down.
On the advice of logic, look at the iFixit.com and Powerbookmedic.com websites. EBay is another possibility.
I'm probably one of the very few people who has two end 2011 17 "Mbps, with the 2.5 GHz processor and 2.4 GHz processor. Both have 16 GB of RAM installed and both have Crucial SSD from TB 1 installed. We got Mountain Lion OSX another has El Capitan. From a practical point of view, I see no difference in performance between the two. The 4 respective base reference is 10,972 vs 10 350.
If I had a 17" late 2011 MBP with a properly functioning 2.4 GHz CPU, I would not bother to change to the faster CPU for a mere (and mostly theoretical) 5% performance increase. Ciao. -
Problem installing Bootcamp on MBP late 2011
Hello
I have a model of Macbook Pro late 2011 and I wanted to install Windows 8.1. I downloaded the ISO file and installed the file on a flash drive and downloaded the drivers from Microsoft support as well. Boot camp successfully installed the ISO and the files on the flash drive and partitioned my disk and initialized in the flash drive (with success), entered my activation code. However, when it came time to choose my boot camp partition, it repeatedly gives me the error "Windows cannot be installed to this disk. The selected disk is a MBR partition table. On EFI systems, Windows can only be installed on GPT disks. "I also received error messages about it needing to be in format NTFS, but I fixed this problem. I followed other tutorials and guides for the problems of which has involved the partition exFAT and reformatting of the flash player install to put in shape, but it gave me no result. The reason why I chose to burn a key USB and not a DVD is because my computers internal DVD drive seems to be broken. I hope that the hotfix that is required to install windows does not require me replace the internal SuperDrive. Help, please.
Installation of boot EFI (non - MBR) on a Mac 2011 is problematic and many driver issues ensue. You can delete the MBR using GPT Fdisk, but boot EFI, which is allowed on the GPT disk, will cause more pain later.
-
Equium A210 - 17I HDD is not too hot and mobile stops
I seem to have a hard drive because of overheating - the laptop turns off intermittently and actually feels very hot (especially at the top left of the keyboard)
I installed a HDD Temperature monitor and it tells me that the disc is currently at 54 degrees, but was up to 64 degrees. It is clearly way too hot and the cause most likely of Islanding. I have the laptop on a USB, fan support to keep it ventilated but this t/doesn't seem to have much effect.
Everyone knows similar? Can anyone suggest a cause and solution? For what it's worth the drive is a Toshiba MK1637GSX - 160 GB - and the firmware is DL030M.
Thank you!
Jeremy
Hello
A few days ago, I had a similar problem that the laptop was also very hot. So I cleaned up the laptop with a jet of compressed air, and I was very surprised how much dust came out.
I followed the instructions in this FAQ from Toshiba document:
http://APS2.toshiba-tro.de/KB0/HTD7A01ZZ000AR01.htmI hope this can help you and if not, you should go to the authorized service provider nearest. They can check the laptop.
-
PC stops suddenly - could it be not too hot?
PC stops unexpectedly. When I turn back to the bios and ask if I want to start windows normally or in safe mode.
My processors get too hot? The fan seems to be working normally.
door - laptop
Hello
Check with the Technical Support Gateway, their documentation online and driver and diagnostics.
Gateway drivers and downloads
http://support.gateway.com/support/drivers/dlcenter.aspTechnical support Gateway
http://support.gateway.com/support/?cmpid=topNavDoor Documents
http://support.gateway.com/support/SUPINFO/index.asp?cmpid=topNav================================================================
Could be heat related - try using a small fan to blow into the air intakes to see if that helps.
It is just like it loses power or stop it in the normal way? Keep in mind
This associated heat does not always mean too much heat as it is often a part or a component
who is too sensitive to normal levels even heat.Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
in fact, remove and replace - don't do not just tight. Remove the dust bunnies and clean the
air vents. Check that fans are working (before and after opening the case). When your laptop on all the
You can do is to reinstall the memory and clean the vents (still may try to add a small fan as a
test).This sounds like material so if the above does not help you then probably need help
a real computer store (not the leeks and the glances at a Best Buy or other stores) or the
Support of system Maker.===========================================================
Check with these utilities to see if information may be collected: run BlueScreenView
to see if there were any BlueScreens and verify in MyEventViewer at shutdown
(or a few seconds before) See the event log contains useful information.It is an excellent tool for displaying the blue screen error information
-Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
and displays information about all accidents of a table.
http://www.NirSoft.NET/utils/blue_screen_view.html-------------
MyEventViewer can be verified at the time of the blue screen (BSOD) or event within a second
or time of the BSOD or event to provide more information about the possible cause - see TIP.MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
Set it a bit before and after the time of the event or BSOD.
http://www.NirSoft.NET/utils/my_event_viewer.html------------
AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows details
application of all accidents occurred in your system. The information breaks down is extracted from the
.WER files created by the Windows Error Reporting (WER) of the operating system component of each
time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
text/html/csv/xml file.
http://www.NirSoft.NET/utils/app_crash_view.html------------------------------
Also do this so you can see the probable bluescreens. (You may or may not be able to see
them if they occur even after doing this according to the cause.)Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also Windows 7)
http://www.winvistatips.com/disable-automatic-restart-T84.html=========================================
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
MacBook Pro Late 2011 Lion slow after new mem SSD and 16G
I'm under Lion (10.7.5) on a MBP late 2011. Replaced the original 750 GB HDD with a 1 to Samsung SSD 850 EVO and store Crucial 2x8G; to replace the battery with one of Lizone. (Restore own Internet) installation of Lion on the SSD in an external enclosure, software update, then exchanged the SSD for the migration of Bay assistant and used internal drive with the old HARD drive in the external box. OnyX to clear the caches and other cleanup. Basic response (keystrokes, menus, scrolling, select the element and application launch and quit smoking) is stutteringly slow and delay - but sometimes, after a reboot, all right (with dynamic performance, I expected to the SSD upgrade) for awhile. I have disabled Spotlight and invoke TM only manually.
I've ran out of ideas and would appreciate advice on what could be causing the slow response! Thank you.
EtreCheck:
Hardware information: (does that mean?)
MacBook Pro (15 inch, late 2011)
[Click for plug technique]
[Click here for the User Guide]
MacBook Pro - model: MacBookPro8, 2
1 2.5 GHz Intel Core i7 CPU: 4 strands
16 GB OF RAM
BANK 0/DIMM0
OK 8 GB DDR3 1600 MHz
BANK 1/DIMM0
OK 8 GB DDR3 1600 MHz
Bluetooth: Old - transfer/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery: Health = Normal - Cycle count = 2 - SN = 0123456789ABC
Information about this video: (does that mean?)
AMD Radeon HD 6770M - VRAM: 1024 MB
Apple Cinema Display 1680 x 1050
Intel HD Graphics 3000 - VRAM: 512 MB
Software system: (does that mean?)
OS X Lion 10.7.5 (11G 63) - since the starting time: 3 hours
Disk information: (does that mean?)
SAMSUNG SSD 850 EVO 1 to disk0: (1 TB) (Solid State - TRIM: No.)
disk0s1 (disk0s1)
: 210 MB Chapin SSD (disk0s2) /: 999,35 go-go (800,87 free)
HD (disk0s3)
[recovery] recovery: 650 MB HL-DT-ST DVD - RW GS31N)
USB information: (what does this mean?)
Apple Inc. FaceTime HD camera (built-in)
Apple Inc. BRCM2070 hub.
Apple Inc. Bluetooth USB host controller.
Apple Inc. Apple keyboard / Trackpad
Computer, Inc. Apple IR receiver.
Lightning information: (does that mean?)
MacBook Pro from Apple, Inc..
Kernel Extensions: (does that mean?)
/ System/Library/Extensions
com [loading]. Cycling74.driver.Soundflower (1.5.2) [click here to support]
[no charge] com.marvell.kext.USBGenericPrinterClass (1.0.0) [click here for support]
Startup items: (does that mean?)
ChmodBPF: Path: / Library/StartupItems/ChmodBPF
Startup items are obsolete in OS X Yosemite
Demons of launch: (does that mean?)
[loading] com.bombich.ccc.plist [click here for support]
[loading] com.microsoft.office.licensing.helper.plist [click here for support]
Launch User Agents: (does that mean?)
[loading] com.google.keystone.agent.plist [click here for support]
User Login items: (does that mean?)
iTunesHelper hidden Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Other applications: (does that mean?)
[performance] [0 x 0-0 x 25025].com.microsoft.Word
[performance] [0 x 0-0 x 27027].com.microsoft.autoupdate.fba
[performance] [0 x 0-0 x 38038].com.microsoft.Office365Service
[performance] [0 x 0-0 x 39039].com.etresoft.EtreCheck
com.Adobe.fpsaud [loading]
Internet Plug-ins: (does that mean?)
FlashPlayer - 10.6: Version: 19.0.0.245 - 10.6 SDK [click here for support]
net.juniper.DSSafariExtensions: Version: unknown [click here for support]
AdobePDFViewerNPAPI: Version: 10.1.4 [click here for support]
Flash Player: Version: 19.0.0.245 - SDK 10.6 obsolete! Update
AdobePDFViewer: Version: 10.1.4 [click here for support]
LogitechHarmony: Version: 2.0 - SDK 10.7 [click here for support]
QuickTime Plugin: Version: 7.7.1
SharePointBrowserPlugin: Version: 14.4.3 - 10.6 SDK [click here for support]
GarminGpsControl: Version: 4.2.0.0 - 10.8 SDK [click here for support]
Silverlight: Version: 5.1.20513.0 - 10.6 SDK [click here for support]
JavaAppletPlugin: Version: 14.3.0 - version SDK 10.7 check
The internet user Plug-ins: (does that mean?)
ZoomUsPlugIn: Version: 3.5.11039.0317 - SDK 10.10 [click here for support]
WebEx64: Version: 1.0 - 10.6 SDK [click here for support]
WebEx: Version: 1.0 [click here for support]
Safari extensions: (what does this mean?)
UTM Stripper
ClickToFlash
iMedia Converter Deluxe
Ghostery
3rd party sous-fenêtres preferences: (does that mean?)
Flash Player [click here for support]
Time Machine: (what does this mean?)
Information of Time Machine requires OS X 10.8 "Mountain Lion" or later.
Top of page process CPU: (does that mean?)
9% safari
4% WindowServer
1% Microsoft Word
0% process Web
0% of mail
Top of the process of memory: (does that mean?)
Process Web 229 MB
Mail 180 MB
180 MB Safari
98 MB Microsoft Word
WindowServer 82 MB
Virtual memory information: (does that mean?)
13,00 GB of free RAM
Used 2.81 GB RAM
Used Swap 0 B
Diagnostic information: (does that mean?)
December 14, 2015, 15:57:22 self-test - spent
Disk information: (does that mean?)
SAMSUNG SSD 850 EVO 1 to disk0: (1 TB) (Solid State - TRIM: No.)
If you are using an SSD, you use TRIM.
This allows to Spotlight and Time Machine runs automatically will not cripple your Mac. But ignoring the TRIM.
in 10.7.5, you can download the activation free utility TRIM.
-
P30-145 satellite - computer cooling system becomes too hot
Hello
Can someone tell me the speed of maximum ventilation for Satellite P30-145, Im of the problems with the cooling system, because my computer is because cutting as its not too hot, Ive currently had raised by 1 inch on wooden beams to help the circulation of air, and I wanted to know what the speed of the fan is the possibility of an update of fan.
Thanks for your help.
MichaelHello
The fan that was installed in the satellite P100 expected works well and should be able to cool the CPU without any problem.
I recommend you to check the settings in the energy saver. There, you can choose between different modes.
It is also important that the fan grids are free. The air circulation is very important for the cooling of the processor -
Is there a program that indicates whether my laptop is not too hot. I'm in the Philippines without Air conditioning. I have a cooling fan, but he remains feeels hot. My fan seems to work on the laptop. Thanks, Vance
In here are two who make Everest and Aida64. Free to try both.
My preference is everset but they were purchased and the product renamed Aida64.
Check the Lim for the beach safe for your computer.
-
Trackpad MacBook Pro late 2011 does not not after upgrade
I just update the OS in my MacBook Pro (late 2011) which worked perfectly well 'El Capitan' to 'Sierra '. Everything went, smooth and pleasant. but now, the trackpad is completely erratic, is in itself (such as move and open programs like possessed). I tried several suggestions from apple such as checking for updates, check the settings, delete all the gestures, etc. I'm assuming that the material is very well that was perfectly fine yesterday... any suggestions please help. -Note; I have to use an external mouse, and the latter is very well.
Hello Med_,
Thank you for using communities of Apple Support. It is my understanding that after upgrading to Sierra, your MacBook trackpad has become erratic. I know that my trackpad is an important part of my daily use, I can certainly understand your concern. I'm here to help get this resolved with you.
You did an excellent job so far! Then I recommend the system management controller (SMC) reset. This system can solve some unexpected behaviors. Follow the steps below:
- Stop the Mac.
- Unplug the MagSafe from Mac power adapter.
- Remove the battery. (Learn about removing the battery in the MacBook and MacBook Pro computers).
- Press and hold the power button for 5 seconds.
- Reconnect the battery and the MagSafe power adapter.
- Press the power button to turn on the Mac.
The LED on the MagSafe power adapters could change State or temporarily disable when you reset the SMC.
Reset the management system (SCM) controller on your Mac.
If the problem persists, test this problem in safe mode. This will allow you to exclude the software as the cause. To help get started in safe mode and additional steps, use the steps and the link below:
- Start or restart your Mac.
- As soon as you hear the startup tone, hold down the SHIFT key.
- Release the SHIFT key when you see the logo Apple appears on the screen.
After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.
To leave safe mode, restart your computer without pressing any keys during startup.
Try safe mode if your Mac does not end commissioning
See you soon!
-
Can I put OS Lion directly to El Capitan without an intermediate upgrade. I have a MacBook Pro late 2011. Safari no longer works on a lot of web content with this OS not.
Yes.
(143974)
-
I have a Macbook Pro (17-inch late 2011) is fully compatible with El Capitan and Maverick. I'm a little hesitant to upgrade. Tried before with e lCapitan and was NOT successful Please HELP
Why has been upgraded to El Capitan failed before?
The only problem is that some applications require the upgrade and some devices that connect to the computer require updated drivers up-to-date. The problem is that for some devices and applications updates are not available and so they do not work with El Capitan.
-
I have Dell laptop with vista .lately my computer stop to sleep when I close read although the power option have been that he sleeps when the cover is closed. Everytime I open the lid it is message that ' the computer prepares lock ' and in a few seconds, it goes back to the login page. during computer work becomes too hot and the fan runs constantly even if I close the lid.
Hello
Follow these steps:
Step 1: I suggest you to download the latest drivers for the graphics card and install it on the system and check. See the article mentioned below.
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
Step 2: disable the Option "Allow this device to wake the computer" for a devicea. open the control panel.
b. click the Device Manager icon.
c. click on continue in the UAC prompt.
d. right-click on the network adapter and click Properties.
e. click the power management tab.
f. uncheck allow this device to wake the computer.Kind regards
Afzal Taher
Microsoft technical support engineer -
I downloaded photoshop it is not too long and then 1 week later received a new computer, is anyway to put photoshop on the new computer?
of course, simply install and activate. a license entitles you to two simultaneous activations.
If you have already activated on both computers, you will need to disable (help > deactivate), at least one.
-
MBP early 2011 start running slow
Hello
I use MBP early 2011, i7 2.2 Ghz, 8 GB RAM, 750 GB HDD (573 GB free). Its pretty slow operation and initialize the time is more than 3 minutes. I ran EtreCheck and the result is the following.
Several times in a day, MBP stops responding for a few minutes. It was everything beautiful, until it has been upgraded to El Capitan.
Battery back up also seems to be about 2 hours with WiFi on and charging takes about 8 to 9 hours for a full charge. I use the genuine Apple magsafe adapter.
Help, please. Thanks in advance.
EtreCheck version: 2.9.12 (265)
Report generated 2016-06-11 20:59:12
Download https://etrecheck.com EtreCheck
Time 01:38
Performance: Excellent
Click the [Support] links to help with non-Apple products.
Click the [details] links for more information on this line.
Problem: The computer is too slow
Hardware information: ⓘ
MacBook Pro (15 inch, early 2011)
[Technical details] - [User Guide] - [warranty & Service]
MacBook Pro - model: MacBookPro8, 2
1 2.2 GHz Intel Core i7 CPU: 4 strands
8 GB of RAM expandable - [Instructions]
BANK 0/DIMM0
OK 4 GB DDR3 1333 MHz
BANK 1/DIMM0
OK 4 GB DDR3 1333 MHz
Bluetooth: Old - transfer/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery: Health = Normal - Cycle count = 51
Video information: ⓘ
Intel HD Graphics 3000
Color LCD 1440 x 900
AMD Radeon HD 6750M - VRAM: 1024 MB
System software: ⓘ
OS X El Capitan 10.11.5 (15F34) - since the start time: about an hour
Disk information: ⓘ
TOSHIBA MK7559GSXF disk0: (750,16 GB) (rotation)
EFI (disk0s1) < not mounted >: 210 MB
Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB
Untitled (disk1) /: 748,93 go-go (573,38 free)
Storage of carrots: disk0s2 749.30 GB Online
MATSHITADVD-R UJ-898)
USB information: ⓘ
Computer, Inc. Apple IR receiver.
Apple Inc. FaceTime HD camera (built-in)
Apple Inc. Apple keyboard / Trackpad
Apple Inc. BRCM2070 hub.
Apple Inc. Bluetooth USB host controller.
Information crush: ⓘ
Apple Inc. Thunderbolt_bus.
Configuration files: ⓘ
/ etc/hosts - number: 2
Goalkeeper: ⓘ
Mac App Store and identified developers
Kernel Extensions: ⓘ
/ Library/Application Support/Kaspersky Lab/KAV/Bases/Cache
[loading] com.kaspersky.kext.kimul.46 (46 - 2016-06-11) [Support]
[loading] com.kaspersky.kext.mark.1.0.6 (1.0.6 - 2016-06-11) [Support]
/ Library/Extensions
[loading] com.kaspersky.kext.klif (3.4.0a25 - 2016-06-04) [Support]
[loading] com.kaspersky.nke (2.1.0 - 2016-06-04) [Support]
[loading] com.logitech.manager.kernel.driver (5.40.1 - SDK 10.8 - 2016-06-04) [Support]
Launch system officers: ⓘ
[loaded] 8 tasks Apple
[loading] 158 tasks Apple
[operation] 72 tasks Apple
Demons of launch system: ⓘ
[loaded] 47 tasks Apple
[loading] 162 tasks Apple
[operation] 81 tasks Apple
Launch officers: ⓘ
[no charge] com.adobe.AAM.Updater - 1.0.plist (2016-05-12) [Support]
[operation] com.kaspersky.kav.gui.plist (2016-06-11) [Support]
[operation] com.logitech.manager.daemon.plist (2015-11-20) [Support]
[loading] com.oracle.java.Java - Updater.plist (2016-05-12) [Support]
Launch of the demons: ⓘ
[loading] com.adobe.ARMDC.Communicator.plist (2016-04-07) [Support]
[loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-04-07) [Support]
[loading] com.adobe.agsservice.plist (2016-05-12) [Support]
[loading] com.adobe.fpsaud.plist (2016-05-10) [Support]
[operation] com.kaspersky.kav.plist (2016-06-11) [Support]
[loading] com.macpaw.CleanMyMac3.Agent.plist (2016-04-15) [Support]
[loading] com.microsoft.autoupdate.helpertool.plist (2016-06-04) [Support]
[loading] com.microsoft.office.licensing.helper.plist (2014-05-09) [Support]
[loading] com.microsoft.office.licensingV2.helper.plist (2015-08-30) [Support]
[loading] com.oracle.java.Helper - Tool.plist (2016-05-12) [Support]
Launch User Agents: ⓘ
[loading] com.adobe.ARM. [...]. plist (2016-05-12) [Support]
[loading] com.bittorrent.uTorrent.plist (2016-04-07) [Support]
[loading] com.macpaw.CleanMyMac3.Scheduler.plist (06 / 06/2016) [Support]
Other applications: ⓘ
[ongoing] com.etresoft.EtreCheck.171872
[ongoing] com.Google.Android.mtpagent.73632
[loading] 417 tasks Apple
[operation] 175 tasks Apple
Internet Plug-ins: ⓘ
AdobeAAMDetect: AdobeAAMDetect 1.0.0.0 - SDK 10.6 (2016-05-12) [Support]
FlashPlayer - 10.6: 21.0.0.242 - SDK 10.6 (2016-05-30) [Support]
QuickTime Plugin: 7.7.3 (2016-05-19)
AdobePDFViewerNPAPI: 15.007.20033 - SDK 10.8 (2016-05-12) [Support]
AdobePDFViewer: 15.007.20033 - SDK 10.8 (2016-05-12) [Support]
Flash Player: 21.0.0.242 - SDK 10.6 (2016-05-30) [Support]
Default browser: 601 - SDK 10.11 (2016-05-19)
SharePointBrowserPlugin: 14.6.2 - SDK 10.6 (2016-04-10) [Support]
MeetingJoinPlugin: Unknown - SDK 10.2 (2016-04-10) [Support]
JavaAppletPlugin: Java 8 update 92 build 14 version Check (2016-06-06)
The internet user Plug-ins: ⓘ
Folx3Plugin: 5.0 - SDK 10.6 (2016-06-11) [Support]
The Safari Extensions: ⓘ
AdBlock - BetaFish, Inc. - https://getadblock.com (2016-05-13)
3rd party preference panes: ⓘ
Flash Player (2016-05-10) [Support]
Java (06 / 06/2016) [Support]
Logi Options Launcher (2016-04-15) [Support]
Time Machine: ⓘ
Time Machine not configured!
Top of page process CPU: ⓘ
5% WindowServer
1% fontd
1% kernel_task
1% AddressBookSourceSync
1% kav
Top of the process of memory: ⓘ
762 MB kernel_task
KAV 221 MB
WindowServer 98 MB
90 MB mds_stores
Soagent 82 MB
Information about virtual memory: ⓘ
3.59 GB of free RAM
4.41 GB used RAM (2.15 GB being cached)
Used Swap 0 B
Diagnostic information: ⓘ
June 11, 2016, 19:43:41 ~/Library/Logs/DiagnosticReports/firefox_2016-06-11-194341_[redacted].crash
org.mozilla.Firefox - /Applications/Firefox.app/Contents/MacOS/firefox
11 June 2016, 19:05:01 test - passed
June 10, 2016, 09:19:02 /Library/Logs/DiagnosticReports/firefox_2016-06-10-091902_[redacted].cpu_resour ce.diag [details]
Uninstall Kaspersky and CleanMyMac according to their own instructions. Any improvement?
Maybe you are looking for
-
Why delete photos to get more disk space do not work?
Why don't earn any disk space when I delete the 'Photos' photos and the album "recently deleted?
-
Windows phone app...
Where can I find one for my Nokia lumia 520? I understand there was formerly an available but I can't find one in the apple store. I use el Capitan now rather than Yosemite.Thanks
-
Why can I not use my labview controls created dll in labwindow CVI?
I created a DLL in LabVIEW for run of LabWindows/CVI. The DLL is started very well but I have no control on the GUI. Why and how can I use this GUI controls?
-
The sound does not work on my XP system
Hi the sound does not work on my Windows XP Pro system, while they were inspecting it stipulates that at least one of the following services does not work, Windows Audio and Windows Audio Endpoint Builder. How can I solve this problem?Thank you
-
How can I get the ul (code 101-8200) file so I can reinstall my printer?
The printer was working fine until I got the message and the code. I don't know what caused it disappear. I tried to get the file with no luck. Help, please! Thanks Bev1950