McAfee updates - doesn't seem to work

Similar Questions

• Vista & check for box Windows Update doesn't seem to work

  Hello, (Specs: Microcomputer HP/Compaq with Vista Home Premium, SP2)

  The Windows Update control box seems to go nowhere.  Keeps audit and some never... no results.  I run FIX - IT, and he did of bugs.  Then restart and try again CheckUpdates.  Same thing.  And also, the "most recent search for updates" and "updates have been installed" two say '' never. ''  If I seem to have lost everything that was installed or checked in the recent past.

  FIX - IT has deleted the ones?

  I ran also malaware program and the program McAfee (that comes with my subscription to AOL) and clean disk.  Then tried the FIX - IT and re-run check updates.  I have received many downloaded and installed a few of them because so many updates were available at that time.  I'm going to install one or more other, but who has not installed.  Just kept running in mode installation, running and running, nothing happens.  I tried to re-boot, FIX - it again...   So now I'm back on the State 'never '.  Updates Windows to check once more runs from nowhere for the last 4 hours.

  (I even tried before execution with Firewall disabled, just to see what would happen.  I turned back.)

  I noticed that the computer activity light is very minimal (1 flashes every 10 seconds approximately) that check the update is running.  That the light should be blinking a lot?

  I also do not know what to do at this point.  The update service is not running.

  Thank you.

  updated-what precedes has worked once for a small set of downloads. (I had changed and reduced the amount of updates installed to shorten the waiting time for results)  When I went to install several updates, it did not.  I ran the Fix - It again and lost all facilities.  After a few attempts, Fix - It is not helping.

  Then I went through this series (a few ideas from another thread of discussion, rest are mine).

  I cleaned the computer - clean disk, then my regular analysis of McAfee, then tried Malawarebytes program (nothing was found by any program scans, fyi) and then defragment the drive.

  After that, several Windows updates appeared.  I installed Windows, not Microsoft software updates only those related to programming (I think that's what I did.)

  And then install it worked and have stayed.  I'll check for another batch of updates installed as I imagine that there must be more, because I lost all the others who were there before the Fix - It.

  I don't really know what the sequence preceding really helped and enabled the victory. Update service works.  But it's good for now.

  Best of all.

  M

• I've updated my information of payment more than four times, but my annual creative cloud plan doesn't seem to work? It is said that it will update within 24 hours after I update, but it seems to never work.

  I've updated my information of payment more than four times, but my annual creative cloud plan doesn't seem to work? It is said that it will update within 24 hours after I update, but it seems to never work.

  Hi Nick, your prepaid subscription expired more than a month, then I recommend you to buy a new creative.adobe.com/plans plan

  For questions about billing, it is best to contact the Adobe Support first to ensure that we can sort on the side account prior to troubleshooting, etc. Let me know if you have any questions!

• Does anyone know of a version of windows defender that actually works? It doesn't seem to work at all, no matter what you do.

  I have an icon and the laptop says it's there, but it is impossible to turn on - it doesn't seem to work.  Windows Defender seems unnecessary, can we just use Microsoft Security essentials for 8.1 who actually seemed to work.

  Windows Defender is disabled on Win 8 when third-party antimalware software programs are installed on 8 to win.

  Have you deleted any third party antimalware program, run the appropriate removal utility (McAfee removal tool, Norton Removal Tool, etc.) and then the computer restarted?

  Recommend that you completely review

  Windows Defender on Windows 8 - Introduction and frequently asked Questions

  And

  http://www.eightforums.com/tutorials/21962-Windows-Defender-turn-off-Windows-8-a.html

• Simple pass doesn't seem to work with Firefox 12

  HP Pavilion dv7t-6000 CTO

  Windows 7 Home Premium 64-bit

  Simple passage 2012 5.3.1.7

  I installed Firefox 3.x to 12. Simple pass doesn't seem to work with Firefox. I installed the latest version (I think).

  Is there a solution?

  I found the update that works with Firefox 12 AuthenTec site: http://support.authentec.com/Downloads/DownloadManager.aspx?EntryId=26

• oraenv doesn't seem to work

  Version: 11.2.0.3

  Platform: Oracle Linux 6.3

  oraenv doesn't seem to work as shown below. I did not ORACLE_SID in the .bash_profile as this server will have multiple DBs in the future. So, I need to use oraenv script to set the variables to approx.

  Trying to source oraenv file.

  $ . oraenv

  ORACLE_SID = [oracle]?

  Ideally, it should encourage the SID listed in/etc/oratab file. So, in this case it should be something like

  $ . oraenv

  ORACLE_SID = [oracle]? GRCFMS

  Here is my/etc/oratab file content and the .bash_profile

  #

  #

  # su - oracle

  $

  $

  $

  $

  $

  $

  whoami $

  Oracle

  $ pwd

  / home/oracle

  $ cat .bash_profile

  # .bash_profile

  # Get the aliases and functions

  If [~/.bashrc - f]; then

  . ~/.bashrc

  FI

  # Specific programs startup and user environment

  #PATH = $PATH: $HOME/bin

  #export PATH

  export ORACLE_BASE = / u01/app/oracle

  export ORACLE_HOME=/u01/app/oracle/product/11.2.0.3/dbhome_1

  #export LD_LIBRARY_PATH = $ORACLE_HOME/lib

  export PATH = $PATH: $ORACLE_HOME/bin: / usr/bin: / bin

  $

  
  

  My oratab file

  -----------------

  
  

  $ cat/etc/oratab

  #

  # This file is used by ORACLE utilities.  It is created by root.sh

  # update the Configuration Wizard or the other database when creating

  # a database or ASM Configuration Wizard while creating the ASM instance.

  # A colon, ':', is used as the field terminator.  A new line ends

  # entry.  Lines starting with a pound sign, "#", are comments.

  #

  # Entries are of the form:

  # $ORACLE_SID: $ORACLE_HOME: N | Y >:

  #

  # Fields in the first and the second are the identifier system and home

  Directory of # database respectively.  The third filed indicates

  # for the utility dbstart the database must, 'Y', or not,

  # ', Being high at system boot time.

  #

  # Multiple entries with the same $ORACLE_SID are not allowed.

  #

  #

  GRCFMS:/U01/app/Oracle/product/11.2.0.3/dbhome_1:N

  $

  $

  $

  Quoting your post

  Ideally, it should encourage the SID listed in/etc/oratab file.

  Your understanding of the oraenv is incorrect. There is no that. Simply, he looks up to SID and affects ORACLE_BASE ORACLE_HOME and path.

  If you set ORACLE_SID asked, with the user name by default. What you see here is the expected behavior.

  In addition, if you do not ORAENV_ASK set to "N", you will be asked.

  What I often do is the following

  Export DEFSID = "GRCFMS".

  Export ORAENV_ASK = "N" # or NOT, I do not remember

  . oraenv

  Export ORAENV_ASK =""

  Works like a charm

  In other scripts that I use

  ORACLE_SID = ${1:-$DEFSID}

  and call oraenv in the above fashion.

  HTH

  -------------

  Sybrand Bakker

  Senior Oracle DBA

• A command doesn't seem to work more

  With the help of as a shortcut for 'select all' doesn't seem to work more

  Agggghhhh... apparently there was an update, and I had to restart T/B. That seems to have fixed.

• I dropped my iPhone 6s in the bathroom by accident and I was wondering if I could buy a new Apple for $299 if I bring him. However, the phone doesn't seem to work. Also I don't have apple care more.

  I dropped my iPhone 6s in the bathroom by accident and I was wondering if I could buy a new Apple for $299 if I bring him an Apple store. However, the phone doesn't seem to work. Also I don't have apple care more.

  You will pay full price for a new iPhone.

  Apple Care does not damage water still > liquid for iPhone or iPod is not covered by the warranty - Apple support

• How can I remove the button from menu? The custom option doesn't seem to work for this.

  How can I remove the button from menu? [This IChing looking for three line on the toolbar icon].

  The tool bar Customize option doesn't seem to work, and it seems a waste to have a button that duplicates the menus. I would trade on the NoScript icon.

  Hi, I can not recommend that you do, but if you are really determined, this article can help.

• We tried the window. ResizeTo and window. Methods MoveTo using javascript. It doesn't seem to work in version 9.0.1. Please suggest any alternative.

  Hello
  We tried the window. ResizeTo and window. Methods MoveTo using javascript. It doesn't seem to work in version 9.0.1. Please suggest any alternative.

  Thank you
  Avinash

  This is no longer allowed for security reasons (bug 565541).
  
  See https://support.mozilla.org/nl/questions/880032
  
  https://developer.Mozilla.org/en/DOM/window.MoveTo

• I'm used to be able to refresh a page by pressing the F5 key. Which doesn't seem to work. Y at - it a keyboard shortcut for editing, or I can create a?

  I'm used to be able to refresh a page by pressing the F5 key. With 4.0.1 which doesn't seem to work. Y at - it a different keyboard shortcut, or I can create a?

  Try CTRL + R

• The left side of my headphones is stronger than the right side, I tried the L and R slider in the settings, but it doesn't seem to work! Help, please

  On the side of my ear legt is stronger than the right side and I tried the L and R slider in the settings but it doesn't seem to work! Help, please!     BTW, I have the iphone 6 sec more

  Left *.

  earphone *.

• My spellchecker of Firefox doesn't seem to work; in fact I don't know that there is. I have a hotmail account, and when I try to use the spelling corrector for hotmail I get a message saying that I am using a browser with a built-in spellchecker. Where De

  My spellchecker of firefox doesn't seem to work; That's assuming that it exists at all. For example, when I misspell a Word when you compose an email using hotmail and I try to correct using the spell checker of hotmail, I get a message saying that I am using a browser that has of own built-in spellcheck. If it is integrated, how the hell can I find?

  This has happened

  Each time Firefox opened

  Is as far as I know, always

  You must install a spelling dictionary, only the US version comes with a dictionary.
  https://addons.Mozilla.org/en-us/Firefox/language-tools/

• ASSIGNABLE button 6 doesn't seem to work.

  I tried to affect 'assignable button 6' to 'steadyshot' on my FS7, but it doesn't seem to work.

  Countermeasures that I tried:
  Thinking that I might need to reboot the camera, I have it turned on and then turning off. I also tried to unplug and re - connect my connection the handlegrip LANC and swapping of lenses (all the Sony E-mount). I also tried other functions as peaking to assinging but no matter how hard or soft how I push the number 6, he's as dead as a dodo.

  Has anyone else had this problem or is there something that I'm not just doing?

  Sorry everyone. I'm afraid that the culprit was myself. I expected a menu pop up and did not notice that the icon has been change to reflect the State.

  Therefore, the button works very well - it was my brain and eyes (I didn't put my glasses on!) which were defective.

• Satellite M40X-148: Microphone doesn't seem to work

  Hello

  My laptop model is SATELLITE M40X-148.
  My mic has stopped working.

  I changed my microphone.
  It doesn't seem to work. They worked well earlier.

  Could you get it someone please let me know how to solve this problem.

  Thanks in advance.

  Kind regards
  Suresh

  Have you checked the settings of the external microphone?

  Go to the Control Panel-> audio devices & audio and on the Volume tab, click the Advanced button.

  Then a new window should appear and you could see different volume controllers.

  Please check if mute was not activated in micro controller