MCP61PM-HM REV 2.2 no BIOS don't chip?

where is the chip of the bios on this forum? the place where it is supposed to be next to the ITE Super IO chip next to banks of RAM is just the pads...

where is stored if the chip is not there? all the other chips are for other things... This is an OEM Board.

I need to fix a corrupted bios, bad day and now just a machine that starts with a black screen.

It's in a pavilion elite m9357c

Thank you

I'm going to solve my own son.

My problem: Corrupt BIOS bad flash

Corrections:

-Procurement of the BIOS BootBlock (seen prevented by provider OEM binary encryption and only decryptying in RAM for flash (they see end-users as strikers of course)). This is not documented, but is very obvious by the fact AWDFLASH. EXE launches BootBlock on a dead BIOS and restore a system to assign an image to the ROM is provided.

-Local flashing DIP - 8 or a format PLCC chip shop

-Chip preflashed order (DIP-8 > RE2.0 & PLCC)<>

I also proved my theory, they have plans against their end-users. I'll be on my cause of chip they obscure their ROM with DRM.

Tags: HP Desktops

Similar Questions

  • E550: Packet of BIOS don't have download

    System update says I need to update my bios to 1.26.1.26. However when I try to download, I get the message "package have not downloaded. I tried several times.

    Update the BIOS finally downloaded and installed. The servers were perhaps too busy initially.

  • BIOS don't read not desired speed of ram.

    Hello, I have a problem with my system running my RAM at 1333, when I 1600 installed. The BIOS in my system settings do not have a manual setting.

    I tried to clear the CMOS and that did not help. He came again to 1333.

    I have a HP P7 - 1446 s

    The UPA has been upgraded to the A10 - 5800 k black Bill.

    The ram of the plant has been removed and Corsair XMS3 CMX16GX3M2A1600C11 (2 X 8 GB) installed.

    It's playback the good amount of RAM.

    I checked and the APU and motherboard support speeds of 1800.

    The ram of the plant is also labeled to 1600. With it reinstalled and removed Corsair also works at 1333.

    Any help would be appreciated!

    Thanks in advance!

    Hello

    Usually, the bios is there changes of dimm but the bios is locked.  A very custom motherboard would give you this option.

    You could try a few different memory manufacturers and see if they have DIMM locations with good default value.  You may have to go up to the faster nominal DIMMS for your model of PC to reach the desired speed.  Computers HP can be tricky with the DIMMs.

  • A15 BIOS DON'T SE DOES NOT!

    Sorry, it's all this old stuff, but that's how life is sometimes...

    so, I'm in the process of applying the most recent (and probably last) BIOS update for my OptiPlex 780 SFF faithful, but the new version is not a flash file - it's download, put on a "Startup" disk, and run from there... the problem is there is no "bootable system disk" for windows 7...   This is problem no. 1.

    problem # 2 is, even if I wanted to, how can I make a boot disk?  I even went up to buy one that has a 'guest of the access system' which injects me very politely as x:\ - into a variant of Linux which is be incompatible with BIOS / windows 7 altogether.

    so, I'll give you a big fat cigar to anyone who can solve this one - I can't of course...

    Thank you

    tool_tip

    I agree with you.  I can go with my own experience however in this more modern UEFI/BIOS updates are auto executable.  I will say that if you click on the EXE file and it only unzip that bios file and a readme, then you need to get a bootable flash drive.  You can click here for a Google search on flash bootable drives.

  • After that update notebook bios don't start. It starts for 5 seconds and turns off several times

    Today morning I upodated bios hp Web site, mp model laptop computer is hp pavilion dv4 5009tx, bt after update it does not start. It starts for 5 seconds and turns off, and cela go pass away...

    Please suggest me what I'll do now.

    MY LAPTOP IS IN WARRANTY PERIOD. I bought this month

    Read the paper > HERE on the restoration of the BIOS.

  • I don't know what version of BIOS for update on dv6t-3200 CTO?

    I currently have the version of BIOS F.23 from 21/10/2010, which I believe is the original version that came with my CTO dv6t-3200.

    When I go to the support page for the drivers/updates there are two options for an update of the BIOS:

    2011 11-21, version F.29

    2010-11-25, F.23 Rev A version

    I don't know which is the most recent one and if it includes improvements to the other or if they are separate lines, updates to the BIOS.

    Product number: XZ714AV

    Hello

    The latest version of the bios of your laptop is F.29 - the HP bios updates are cumulative, so the latest version contains all the updates and improvements to previous versions.

    Kind regards

    DP - K

  • Operating system to load BIOS for Satellite Pro A200

    Hello

    I have a PSAE4E - 03300WEN Satellite Pro A200 with V5.30 BIOS and Windows 7 SP1 32 bit.
    I improved the T2330 CPU to T8100 and thought to update the BIOS for increased functionality.
    But in the Toshiba download page, I get the following 3 options:

    2.60 - WIN32 this Bios is only compatible for portable computers with Windows Vista! (32-bit only!)
    2.60 - WIN64 this Bios is only compatible for portable computers with Windows Vista! (64-bit only!)
    5, 60 - WIN this Bios is NOT compatible for notebook computers equipped with Windows Vista!

    And the question is...
    What about Windows 7? I should stick to V5.30 or go to a newer version? :-/

    See you soon!

    > I improved the T2330 CPU to T8100 and thought to update the BIOS for increased functionality.

    First of all laptop manufacturers (any manufacturer it is) don t support CPU updates.
    Of course, you can replace the CPU but it's your own risk.

    But what I mean is that updates of BIOS don't provide additional functionality or improves which would increase the functionality after upgrade CPU and this means that the BIOS update is not necessary to obtain better performance even after upgrade CPU.

    However, certain phrases on your BIOS question:
    5.60 BIOS seems to be released for portable computers running Win XP:

    Other versions of BIOS (v2.60 32-bit and 64-bit) are released for Vista systems I guess that this version should be compatible with Win 7 since its more similar to Vista to Win XP

    However, you changed the processor and consequently the hardware configuration is different now, I can't say for sure if the BIOS update would be the best option in this case

  • Satellite A210 - 17l BIos update to take care of advanced format HARD drive problem

    Hi all

    Really hoping someone can help me with this.

    My old HDD not was not so I cloned the entire disc before it failed. -Just in time, too.

    I ordered a new drive - it's a WD scorpio black - Advanced format.

    Unfortunately I can't get my picture on this new album.

    Also, I am unable to do a reinstall with the original restore also cd because it doesn't have service pack 1 and that means that it can't recognize the HD.

    In any case id prefer to be able to restore my image and not make a re-install when even if possible.

    So my question is this:

    Y at - it an update of the bios I can ask my another pc version 2.00 is available which will include options to change the options of ide drive - ahci?

    It's the only solution I can think of-bearing in mind I do not have an operating system installed, so the alignment tools are not an option as another fix. -Fast technology of storage Intel drivers do not work, because I have an AMD athlon processor.

    So is there any BIOS I can Flash my computer with to activate the options mentioned?

    I have a method to Flash the bios with a BONE, so this isn't a problem.

    Also other suggestions for workaround on this more than welcome.

    Thanks :))

    The_red_pill.

    Hello

    Update BIOS don t help you. To my knowledge, it does not add additional options such as a switch between AHCI and compatible mode.
    In addition, you can use ANY BIOS. You must use the BIOS that came out for the model of laptop. But as I said, this isn't a solution.

    In addition, the image of Toshiba already contains all the drivers in order to install the system. It s any SP1 isn t the image part.

    I guess you're talking about Vista OS, given that the laptop came with pre-installed Vista OS. http://www.Toshiba.co.UK/discontinued-products/Equium-A210-17I/

    I recommend you format the HARD drive first.
    Use a tool called Gparted. You can create a bootable USB key containing this tool.
    This allows to start Notepad in order to format the HARD drive.

    The installation of the system using the recovery disk

  • Need BIOS for Satellite 1100-z17 file

    Can you help me with a bios for toshiba satellite 1100-z17 file because I tried to update the bios with satellite 1100-z1 and my phone is dead!
    Please help me!
    Kind regards
    get

    Post edited by: get

    Hello get them

    Sorry for this, but you must be kidding!

    You know you need to use the good BIOS and the proper procedure upgrade of BIOS, don t you?

    Incorrect BIOS may damage the motherboard and I'm afraid of what happened on your computer laptop m. ;(

    Maybe you are a lucky man and the BISO right will bring the motherboard to life, but it is very questionable.

    I think that in this case only, a technician can help you. Try to contact the ASP in your country.

  • Satellite C850: BIOS CBS - what is it and how to update if necessary?

    Hello world. I have a C850-BMK. Now, I've updated my BIOS of 1.40 to 6.60, but CBS is 1.60.
    What is THIS and what you think update (if it is possible, of course)?

    Hello

    First rule of the BIOS; Don t he touch, unless you need it.
    BIOS is a piece of sensitive computer and should not be touched if you don t have serious problems.

    Second: EC means (on-board controller). This does not mean that the on-board controller firmware would be too updated firmware for the controller BIOS statement and although you will see a new version of the BIOS.

  • Satellite X 200 - 1AA - after recovery, I have the older version of BIOS?

    I've recently updated the BIOS of my Toshiba Satellite X 200 1AA with Windows Vista SP! After a few days, I did a product recovery using the recovery CD. When the recovery is performed, the BIOS back to the previous version?

    Hello!

    No, the BIOS don't go back to the previous version. The Toshiba Recovery disk contains factory settings of software on your laptop and not the BIOS. The BIOS has nothing to do with the software on your laptop.

    So Don t worry, the recovery disk doesn t touch the BIOS and you still have the new version.

    Good bye

  • Re: Pomp L670 Bios not to destroy more

    Hello

    The toshiba L670 BIOS don't no more dash.
    Led turns on but nothing happens.
    There's no way to bring in the bios. On the screen, only a line (feature film) flashing

    Thank you for your help (Assistant)

    Hello

    Could you be more specific?

    Start the laptop to the top or the is happening exactly?

    You can access the BIOS by pressing the F2 key immediately after that the laptop was turned on?

  • Equium A60: BIOS does not recognize the CD-DVD-ROM

    Hi, the CD-DVD-device is not recognized by my Equium A60. It has worked fine for over a year, but now, even if the machine is running and the light comes on and goes off, it is not recognized by the computer.
    It is not in my computer, nor in the list of hardware devices. When you start the computer, the BIOS don't recocgnize it or.

    It seems that it is a hardware problem... Any idea?

    Thank you

    The device appears in the device as an unknown Manager? If the drive is not displayed in Windows Explorer, that the method on this page may help http://support.microsoft.com/default.aspx?scid=kb;en-us;320553

    Try it!

  • Satellite L650 - error while upgrading Bios V1.90

    Hello

    I got a message via the Toshiba Board on my laptop Satelite L650 BIOS update. New version 1.90. So I did it, the download was successful, I then click on install and a screen opens for Insyde Flash, it starts "initializing" and the following error dialog windows while it happens

    Error
    WDM: EC / auto file cannot be opened.

    Ok

    Can you help me to complete this installation?

    Thank you

    Hello

    Please download THE updated BIOS.
    Have you tried to install the same?

    Before you begin to update BIOS don't forget your laptop is connected to AC power, disconnect from the network and close all running applications.

  • Satellite A30 PSA30E - BIOS does not recognize the HARD drive

    Hi all
    I have a Satellite A30 (PSA30E) and I start the computer. When I enter the BIOS it does not recognize the hard drive.
    Does anyone no what I can do?
    Is it possible to restore the BIOS?

    Thank you

    Hello

    You replaced the HARD drive by a new one or the BIOS don't recognize the old HDD?

    Usually if the laptop is not able to start and that the BIOS does not see the old HDD then I guess that the HARD drive is faulty.
    If the BIOS doesn't recognize the inserted new HARD drive and then either you ve bought is not compatible, or the size of the HARD drive is just too big.

    Please provide more info. You see error messages?

Maybe you are looking for

  • You can delete your own post

    If you can, please give me instructions. Please note my operating system and devices.

  • Uses of clone

    I learned that if you create a model (lives) and use the model, each case would be a clone.  However, I used some of the files lives that come with LabVIEW, and I do not get a clone.  When one lives would translate a clone? Is a clone just a regular

  • Send to

    When I click on an object and want to send it to another file on my LT and I click on "send to" the only place that shows is DVD player. On all my other computers he use to tell my Docs, all external office who were connected, is there a way I can ad

  • BlackBerry Smartphones how reset the password in the password Keeper 6.0.0

    Dear members, I recently updated my software to device to v6.0.0. After installation, I can't open my password Keeper 6.0.0. I did not have any password set in the application. Now, I want to reset the password. I'm not worth losing data in the appli

  • Lightroom files deleted (permanently) everything by moving

    Today move some files and by organizing on a regular basis, I noticed one of the files that I had moved just stood as a missing file.  I had looked and worked with these photos before, so I know they were there.  I had not deleted since Lightroom or