A15 BIOS DON'T SE DOES NOT!

Similar Questions

• Satellite A300D (PSAKCE) - BIOS is damaged and does not start

  I formatted computer after when I put update computer BIOS is frozen and it does not work now. File is true where I download from Toshiba Web site.
  I searched Web of Toshiba sites there was not any producere for recovery of the BIOS for the damged BIOS file. Many start-up models with some keys to the BIOS update but mine is not starting any screen only empty key.

  -Can I do it myself? Is there a procedure for Satellite A300D-17F (psakce)? I don't want to wait for the rear service it 6 months before I bought it.
  -If I send to the service, it is under warranty? I don't know any time service can be a problem. They say problem user but I reformatted the PC after I started the update program and they can not understant that sometimes.

  Thank you...

  Hello!

  In this case, you need help from the ASP. You can do anything and it is possible that the ASP BIOS reset.

  On the Toshiba site, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good bye

• BIOS on Satellite L350 does not recognize devices

  Hello

  I have a Satalite L350 breaking in windows after about 1 min of loading. I thought that maybe the hard drive was defective, so I tried to run a program I called PC test 6. I then discovered that the cd player would not read. I then tried a CD USB player and again it would not start a disc. After resetting the BIOS to default settings, I discovered that the BIOS is not recognizing any device other than the hard drive. I took the hard drive and tested with PC Check via another PC and HD spent.

  Now I want to reinstall windows, but the CD player does not start. I guess that the problem comes my BIOS maybe flashing (InsydeH20 version 1.5) it would work? But... no device USB and CD: S

  Any ideas that I can please?

  Hello

  I don t think that the BIOS is the problem.
  The BIOS recognized HARD drive correctly. Right?
  Well, I think that the CD/DVD drive is faulty if the BIOS cannot recognize what
  Furthermore the L350 BIOS does not support startup from the CD/DVD USB drive.
  It is not possible

  If you want to install the recovery disk operating system, then you need to replace the internal CD/DVD drive because it appears to be defective

  Of course, it's my personal choice and just a suggestion

• After the BIOS update, the light does not work

  I upgraded my BIOS 83ET78WW T420 (1.48), but now my microphone mute button and brightness controls no longer work. When I adjust the brightness, the indicator appears in the display, but it does not actually.

  Are there updates more that I have to apply to get this working? I don't want to install all the additional tools of lenovo to get my screen to work, what is needed. If we need more information on my system, let me know.

  Material: T420

  BIOS: 83ET78WW (1.48)

  OS: Windows 10

  Thank you!

  I found the solution. The Intel HD graphics card drivers have been somehow erased when I upgraded. Enter devmgmt.msc and re-install the drivers solved the problem.

• dv6 7309tx wanted: HP ENVY DV6 7309tx BIOS update after the corrupt bios, SP68425 F.2D does not work

  The problem began with a blue screen after the updated copy on the road on machine of internal to external hard drive...

  After the reboot, the screen went white and CAPS LOCK has 2 flashes

  Device: HP dv6 7309tx envy

  Current BIOS: 22/01/2013 F.24 / 181E

  Downloaded SP68425 with F.2D since 08/2014

  insydehflash.exe in the package on a spare computer (no HP) does not support the extraction to USB, I will need to update the bios on device dead...

  Device is now in HP PC Hardware Diagnostics UEFI, where I can add usb and start to update...

  However, the raw after extraction of sp68425 bin file is not accepted...

  and I can't go any further with the tool insydeh sp682425 because it does not allow me.

  There is no real BIOS option the last update on the HP support who is crazy enugh...

  F.2d

  FTP://FTP.HP.com/pub/SoftPaq/sp68001-68500/sp68425.html download: ftp://ftp.hp.com/pub/softpaq/sp68001-68500/sp68425.exe

  Please help to send me the appropriate files or explaining how I can generate in a different machine than the one update has no boot?

  Thank you

  Hi all

  If the solution was done by a kind shop in Hungary, http://reballing.hu

  and a specialist in firmware http://vinafix.vn

  So apperently my BIOS has been corrupted that CAPS lock sign showed and it could have been rewritten with HP Diagnostics if HP could provide the RSA key for her...

  In this case it is not provided, you don't have that one other solution, to find a nice (as reballing.hu) repair shop, where the guys are nice enough to disassemble your computer, take the chip and write the data without the requirement of RSA software HP Diag using a writer BIOS correctly. You can also buy writers of the bios and the tools, but he could be uite costly and risky for you to do...

  So you have a repair guy, the only other thing that you might need to trust is the dump of the BIOS correct, please note that the supplied with the softpaqs .bin file is encrypted, so it must be decrypted, it is not an easy task, it worked for me too after awhile, but better to find a provider of bios (saves time for you as well and that is why HP is not willing to give it to you, you have two choices: make a work computer, and read the bios in this way (you must have the identical chip and content, so preferabily the same card mother or product)

  Or go to www.vinafix.vn and ask them to provide you with, these people are kind enough to explain how the thing works and what you need to write your own return data.

  So once that you set is not more than 30 minutes for a handy guy and as they work at the time, it is fairly cheap as well, it cost me 25 USD total (10 for bios) and 15 for the actual work done

  It's a shame that yu can not really find information about this threat, and also that it can happen to your computer at any time it seems that, always in waiting to see what caused, and if she came back or not... but as of now, I am pleased that the computer is back on!

• Original image has disappeared I think off the hard drive and the BIOS password set up does not work?

  Someone please help me with this!

  I bought this laptop from a friend (have receipt) who sell it to me because the screen was cracked and spidered all out when you the activated. And everywhere he went to ask to get the screen fixed it is very expensive ($250 - $350) and he said that it would be just a newer laptop. So he sold me this which is a model Probook of HP4420s XT940UT #ABA. About a week after I bought this Probook friend who sold it to died me suddenly. It was sudden and terrible. Some time later, I had the time of the purchase of the LCD for this model, replace it myself (was very easy actually) and booted up the laptop with a new installation of Windows 7 Professional 64-bit Edition. After installing all my software and using the laptop for a while now, I wanted to get into the Bios that I've never done. So when I started the laptop, click ESC, then F10 to enter the BIOS, there were two places to enter a password is different then all Dell I've ever owned. One was mine I guees I put in place using HP protect tools and the other says BIOS/administrator. Well I can do most of the changes with the one I put in place with my password but my password does not work, nor can I get in some very significant changes that I wanted to do using Bios/administrator, as kindling the LoJack, namely the blocking of the hard drive etc. , turning on turbo boost, fan, etc. Well, since the person I bought is no longer with us, there is no one to turn to the answer to this question of administrator/BIOS password / problem.  I tried to take battery Rtype and restore that way, didn't work. Several times, I called HP and they sent me to a BIOS page to download the same BIOS, I have already, would not let me install it. When I bring up the command prompt and do not put anything in BiosConfigureUtility.exe happens, said just a wrong command. When I try to enter the BIOS through the C: file in the files of the SSM, I reach the BiosConfigUtility.exe file, click on it to open it and it just flashes a way small order page to fast to read what it says. I would like to have complete control over my laptop thinking I have a lot of time and money invested in it now. The problem would have something to do with installing the 64 bit version of Windows 7 instead of the 32 bits guess what it initially provided with?  Where can I find the UUID and what tech Department I would ask because if I have to call HP again and what other information should I have ready for them if you know? I have all the manuals and they say that this laptop is compatible with Windows 7 Ultimate 64 bit Pro is what I installed. I'm mixed responses from many different people on this and would like an answer from HP someone who has experience in dealing with the BIOS in the Probooks business models if possible please. I really like this Probook and have since become a big fan of most HP, Dell and Lenovo.  I intend to buy two probooks, one for my wife and one for my daughter because this one is like a MacBook, but better.  Thank you for reading this and I hope someone can help with more than one answer then GET AHOLD OF HP TECHNICAL TEAM. As I said, I did it.

  Model: HP Probook 4420 s

  Type: XT940UT #ABA

  Operating system: Windows 7 Ultimate

  BIOS version: 68AHHH Ver.F.20

  SM BIOS Version: 2.6

  Hardware Extraction layer: Version 6.1.7601.17514

  Jason,

  Sorry to hear about your friend and your problem.  The BIOS password cannot be reset without the help of HP.  They will need some information from your PC and increase your case.  I recommend you give them a call.

  -wes

• the 'c' key don't act does not on the keypad wired iMac

  C on my wired keyboard key does not work. I looked at the keyboard Viewer, and the c button does not illuminate when I look at. The capslock key is staying too dull-lit when not in use, the light becomes brighter when I activate it, but she remains weakly lit when turned off.

  I restarted but also tried to plug into each USB port. (I don't think that the keyboard is broken, as I tested it)

  It's the first day, I had these problems.

  I would blow with compressed air, or reverse & bang softly there.

  In the keyboard Viewer can you click the c button and highlight?

• Satellite L650-16w: BIOS 2.40 fan does not start standby mode after

  I have the toshiba Satellite L650-16w
  the version of the bios is 2.40

  I have a problem: when turning on the pc, the fan speed is still 90%, whatever the pc, and if the computer goes into sleep mode the fan stops and does not restart and I got the message: 'problem with the cooling system, turn to pc immediately '.

  I had this problem also when I got the 2.2 bios, when I upgraded to 2.40 for a few weeks, everything was normal and now the problem again.

  You set the default BIOS?
  Make sure in the BIOS, press F9 and then save the changes by pressing F10.

• Satellite A60-202 after bad BIOS updated the PC does not work

  Hello

  After a very bad my BIOS update, my PC doesn't work and doesn't turn on.
  What to do now?
  It is Toshiba Satellite A60-202 with 512 MB of memory and 40 GB of HD.
  model PSA60E-OLP06TFR SA60-202

  Thank you

  Yves

  HI Yves,

  Unfortunately, if the BIOS update procedure does not work (or fill), then it is likely that the BIOS in the CMOS chip had been corrupt and without it, you will not be able to boot your laptop to fix the problem.

  It will be necessary to bring (or send) your laptop to a repairer authorized to have reflashed BIOS.

  Kind regards

• all-in-one Officejet 6310: officejet 610 all-in-one in offline and don't watch does not reinstall in windows 8

  I have a Wondows 8.1 and a printer portable all-in-one officejet 6310.  I have my printer installed and works fine on my laptop, but out of the blue one day that the printer will be offline and restarting the computer and printer does not correct.  I've uninstalled and reinstalled the computer many times - this helps for about a week before it disconnects again.

  Now when I uninstall my laptop says there is no printer in range and lists no printer for me to install.  When I tried to manually in my printer - doesn't say that there is no such printer available.  Any suggestions?  Apparently this ONLY happens to me on my computer and not someone else in the home on their laptops - we have a total of 4 laptops in the House all on the same router and using the same printer.  Oh how I feel like a fool with windows 8.  Someone at - it helps or good suggestions for me? PLEASE? !!

  Don't worry, it happens to the best of us. I recently became very angry because my iPad was not charging, the end came unplugged from the wall charger! Laughing out loud

  This problem can be caused by outdated closed ware, contradictory I.P within the router, etc. I have worked on a Thread revolving around Windows 8.1 for awhile, check it out for some possible future troubleshooting operations.

  There are steps to add the printer a way, assign a static IP, check that some updates are installed by Microsoft, etc.

  Missing/partial prints & printer offline on Windows 8/8.1<>

• Update the BIOS Alienware x 51 does not start

  After the BIOS level and rebooted the system, now it seems changed the configuration of startup and 10 Windows does not start.

  I checked the boot options and saw that one selected is now Legacy of start and it seems that Windows 10 works with UEFI.

  Should what boot option I set by default in the BIOS so that window 10 restarts automatically?

  Any help would be apreciated.

  Hello

  Boot option should be UEFI. Disable secure boot, and then on the Advanced tab > Integrated devices: change SATA AHCI mode.

  If the problem persists, press F9 to return to the default settings.

  Let me know how it goes!

• N500 bios update Windows 7 does not

  I tried to run the utility of Lenovo support updated winflash v1.10 N500, but it says that it cannot load the driver, once I started flashing. Running as administrator and in compatibility mode does not change it. Is it possible to Flash the bios with a start BACK? The bios is in a wph and bin format not in the package winflash.

  It worked, the bios is now 1.09: http://occamsmonkey.spaces.live.com/Blog/cns! 9531541C7AFAD925! 322.entry? a = 484598270

• -HP Mini 110-1025DX closed by itself while downloading the BIOS driver and now does not turn

  I have reintalled windows xp then download, audio driver gave error when downloading and I read on the internet that unless I have download BIOS, she held in error, so I downloaded "WinFlash for HP NetBook system BIOS - Microsoft Windows-Based" and while it was installing I did something else, and when returned, not e book had closed and now does not turn.

  the specifications are also less

  -HP Mini 110-1025DX PC
  Serial number: CNU9316D45
  Product number: VA723UA -.
  Operating system: Windows XP Home Edition (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.111025 - 1629)
  Language: English (regional setting: English)
  Manufacturer: Hewlett-Packard
  Model: HP Mini 110-1000
  BIOS: KBC Version 02.0 B
  Processor: Intel (r) CPU Atom N270 @ 1.60 GHz (2 CPUs)
  Memory: RAM 1016MB
  Page file: 514MB used, 1927 MB of available space
  Windows Dir: C:\WINDOWS
  DirectX version: DirectX 9 .0c (4.09.0000.0904)
  DX setup parameters: not found
  DxDiag Version: 5.03.2600.5512 32 bit Unicode

  What should I do?        Thank you

  It won't turn? The lights come?

  Let's first, remove the battery and unplug the power adapter and leave without electricity for a minute... then reconnect and see if it is eaten on.

• BIOS rom checksum error does not start

  Compaq

  will not boot at all

  When I turn it on it automatically goes to a black screen that says:

  Award Bios BootBlock v1.0

  Copyright (c) 2000, price Software Inc.

  BIOS Rom checksum error

  keyboard err or no keyboard present

  IDE ATAPI device detection...

  Found CDROM tries to boot from the pass it...

  can anyone tell if this can be fixed if it can and you know I would appreciate it a lot

  Oh and I got a windows vista disc to see if it downloads it, but just on the same screen

  The "boot block" needs to load the rest of the BIOS of a memory chip. Since it doesn't, either the battery on the motherboard (a piece the size of a $0.25 coin silver) has failed, either the content of the memory chip cannot be read.

  Replacing the battery is fairly easy.
  First of all, notice the writing on the top of the battery.
  You will need to put the new battery into the socket,
  with similar writing facing face up into the socket.
  Look on the edge of this battery to a small 'finger' which holds the battery in its socket. Push this "finger" of the Center, and the battery must be able to be raised.
  Remove the accumulator at any computer store and get a replacement.
  Insert it, and then try again.

  If the problem persists, then either he must:
  * Replace the motherboard
  * replace this chip memory (which can be soldered on the motherboard at all times).
  * replace the computer, taking the disc drive of the old computer and its connection as a 'slave' the drive in the new computer.
  * take your computer to an expert technician.

  The attempt to boot from the CDROM is a process "emergency", to use when you have a specially created CD disc that contains a copy of the software to load into the memory of the BIOS chip. It is not a 'normal' start (to load the Vista disc).

• Pavilion 15-e016tx: usb controller not installed or don't display does not correctly

  Two days back, I changed my windows 7 32-bit operating system. Everything is going well except the usb controller.  In the driver manager, it's show marks of yellow color. It is not installed display driver or does not properly. I could not find this driver. I am not able to use my USB. Please suggest a way to get rid of him.

  Hello:

  Download, unzip and run the file setup.exe from the link below...

  https://Downloadcenter.Intel.com/download/21129/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-7-series-C216-chipset-family

  See my blog post on how to get the graphics to work...

  http://h30434.www3.HP.com/T5/notebook-display-and-video/solution-for-getting-HP-notebooks-with-the-Radeon-HD-8670M/TD-p/3601605