Re: Pomp L670 Bios not to destroy more

Similar Questions

• Satellite L100 - cooling fan does not start up more

  Hello

  On my L100 laptop cooling fan doesn't seem to work! It does not start up more and after awhile the laptop shuts down as it is too hot. What can we do?

  See you soon
  Mark

  Hi Mark,

  The fan lights normally the POST process before loading the BIOS. Your laptop will continue to boot normally, I presume that your fan control electronics is still viable, otherwise the MESSAGE would fail. So, it seems likely that the problem is with the fan itself. I suggest you check that the fan will run in fact and it missed upward (try to blow strongly in grids).

  If you laptop is still under warranty, then you must contact an ASP to get the fan replaced.

  Kind regards

• Acer Aspire 5349 began to stop randomly, now can not stay on more than 2 seconds

  Hello world!

  I use my 5349 aspires for more than 4 years now running Windows 7. A few months ago, he began stopping at random - sometimes after an hour of work, other times - after 10-15 minutes.

  It is used mainly for light office work, but given his age, I decided it was due to the accumulation of dust or otherwise overheating due to thermal decomposition paste to the processor and the thermal pads - for the video chip. It is out of warranty, so I disasembled he replaced even if the thermal paste compound and the thermal pad seemed OK. There was no dust important problem as well, in any case seized the opportunity to thoroughly clean.

  After assembling and switching on, it ran stable for 3-4 hours which even helped me put upgraded to Windows 10 (32 bit). He rested for a few days due to the holidays here and then when turned on - again closed in about 10 minutes. After that no matter what I do - perform disassembly, check for loose contacts, CMOS battery, laptop battery, etc.-, he could not run for more than a few minutes from the Windows recovery and then stops again. In the last days it even can't stay for more than a few seconds before stopping again, so I can not even get into the BIOS.

  Laptop battery is good, because it has always been used as a desktop replacement, in all cases tried with battery and battery off nothing works. The power brick is one that came with it originally, even though it says LITEON instead of ACER. Tried another one with the same voltages and amps for an another ACER laptop - the situation didn't improve or change at all.

  Logically, I started reading here and discovered on exactly the same problems with other similar models, so I tried all the suggestions - replaced RAM, HDD, DVD, tried to boot from USB or DVD, tried to remove the build-up of electrostatic charges. I'm very suspicious of the latter, or any electrical problem / might like, because when I completelly demolish the mobile nut, i.e. by removing everything that can be removed and then back - it works for 10-15 minutes before closing.

  So, finally, the question is - is there suggestions that I could follow?

  The easy solution is to replace the MB in case it would help, or the completely portable, but I hate when I don't understand or diagnose a hardware problem and will make every effort to identify and resolve.

  See you soon!

  Google the keywords "5349" "mainboard" or "motherboard". Replacements to run $100 inc shipping, some on ebay U.S. and other China.

  Jack E/NJ

• Motherboard BIOS not installed and not drivers

  I'm closer to the repair of the operating system of the new motherboard I brought on a batch of files common and records in what was another computer I "inherited" and then put on the sidewalk during the upgrade of the RAM went belly, a friend told gave his old ASUS motherboard and installed my old Maxtor IDE on its HARD drive Bay and the first thing he said to do was record Pro (I did that already) XP now I wonder about the speed is as FAST it should be between two GB and

  some on the AMP. I want to know if there is a way before making an operating system R, (I learned about the choice of option NOT R) can I get the hard drive old programs used by the other motherboard? (I have no way to distinguish the old from the new motherboard) programs that are probably no longer necessary or useful with a more sophisticated P4C 800 - e Deluxe. I would like to add another IDE retrieved on another PC which has been using Vista and I kept the OEM for Seagate SATA 250 number but I just want to be able to have additional capacity for as in the course of execution of movies and MUSIC on the Internet. To much work, I have requires a numbers instructions storage and demonstration of confirmation. Any help on these questions would be a BIG help. As yet the second page POST says BIOS not installed. I guess that will take place after I re run the Windows installation. Thank you, winded Alweed

  Hello

  You can try the steps of troubleshooting provided in the below mentioned link and check if they help.

  Your computer stops responding when you restart to complete the installation of Windows XP Service Pack 2 or Microsoft Windows XP Tablet PC Edition 2005

  http://support.Microsoft.com/kb/885626

  Because the problem is with the BIOS, I suggest that get you in touch with the manufacturer for further assistance.

  Note:

  BIOS change / additional settings CMOS (semiconductor) to oxide of metal bad cancause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• Satellite Pro C50-A-153 does not not turn on more - overheat?

  LS,
  A week ago I bought a new laptop, a Toshiba Satellite Pro C50-A-153.

  Last night I was watching some micro-credit (looking for a new holiday) and I noticed that the laptop was overheating.
  I hit the market / stop butten and it turned of... later.
  And now the computer lights no more.

  _Situation: _
  laptop was placed on my table, completely cleared of any blokades for air intake.
  The table was heated. Now after hours of reflection, the computer does not work.
  With or without power line in it.

  What should do?
  Erik

  Hello

  Let's hope that Timox tips might work for you.
  In case of workaround won't help you, I would say that some hardware is dead, and so the laptop does not power and more.

  What part of material likely to be affected? Hmm, in the worst case, your motherboard is faulty.
  But I think first of all that some less expensive parts need to be checked for example RAM modules.

  RAM failure would prevent the laptop to boot and so I would check the modules first.
  I don t think there is something wrong with HARD drive because even if the HARD disk is defective, the device turns on but could not start the system.

  But it's a new laptop... so don't replace anything. The guarantee is valid and in the event of hardware problems, the guarantee must cover the laptop repair.

• I have a 4th generation iPad and the display is damaged. I bought in the States, but I'm not living there more. I live in the Brazil. What should I do to have difficulty here in the Brazil?

  I have a 4th generation iPad and the display is damaged. I bought in the United States, but I'm not living there more. I live in the Brazil. What should I do to have difficulty here in the Brazil?

  damage to the screen is not covered by the warranty - see if this offer your answer > https://www.apple.com/support/ipad/repair/screen-damage/

• iPhoto ' 09 on Snow Leopard does not appear geotags more!

  Suddenly iPhoto ' 09 v8.1.2 (424) on Snow Leopard 10.6.8 does not appear geotags more!

  They have always been correctly posted so far...

  Neihter for old photos (taken by iPod touch 4th generation with iOs 4, but also other cameras to gps), nor to the more recent (taken by the iPhone 4S with iOs 8.3).

  None of my S. O. (OS X and iOs) never improved from those residing at the same time, with the only significant exception of 7.1.2 to 8.3 on the iPhone natively.

  Any advice?

  The contract between Apple and Google for the use of Google maps with iPhoto 9.4.3 and earlier for locations an elderly couple of months expired and was not renewed.

  Now uses Apple its own program for locations maps and too the use you need to run iPhoto 9.5.1 and Mavericks or 9.6.1 and Yosemite El Capitan or Photos and El Capitan.

  However, in order to get iPhoto 9.5 9.6.1 you must have a version of 9.X to Apple iPhoto has purchased and installed.  Because you can not buy Apple iPhoto 9 more your only option is to upgrade to El Capitan (a free update if your Mac supports 10.11.1) which will include pictures.

  Your Macbook model can run El Capitan and should be upgraded to 8 GB of memory from Crucial.com.  If you have the base 2 GB memory which is not sufficient to run El Capitan.  If you have 4 GB which works, but with your old machine upgrade to 8 GB will offer significant performance improvements.

  

• BIOS not taken in charge trying to get Windows 10. Now what.

  Have no idea what it means when I get a "Bios not supported" message when you try to install Windows 10. What I have to do.

  Check with the company that built your PC to see if they have a BIOS update that you install, or if they have an option in their BIOS to change mode (some computers may).  If they say no to these two options, then you should not install Windows 10 on this material.

• My lightroom is missing not connecting no more

  For some reason, is gone to the garbisch container, I was able to return the files to my desktop but now adobe lightroom does not open any more than I can please help me I'm not good in this business, thanks

  Hello

  To retrieve the photos in Lightroom, you will need to recreate a link to them in Lightroom.

  Please see Adobe Lightroom - find folders and files moved or missing

  Concerning

  Assani

• How can I change my plan? im not a student more and I want to change it since is not valid anymo

  I want to have a new plan since im not a student more

  If I want to cancel my plan student how I can do?

  How to cancel a subscription cloud creative

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

  https://helpx.Adobe.com/contact.html?step=CCSN_membership-account-payment_cancel-your-memb ership_stillNeedHelp

• Creative cloud does not automatically start more

  My creative cloud application does not automatically start more. It worked fine for a year and a half.
  But although the box in preferences to start automatically is checked that it does not automatically start more.
  It does not appear in the system tray I must maualy double click the CC (which i put my office op) to start.

  I also had a solution ad put a CC shortcut in the windows startup plan but he strangely disappears each time.

  After I dubble click on the strats of application up normally and everything works fine, so no problems with programs or the application of cc
  It was simply not possible box Autostart to highest upward. I use windows 8.1

  Unfortunately this did not help either. What I did then, I unchecked the box run at startup and put a shortcut in the Windows startup folder. Since then, (3 days ago), he continues to work. Hope it stays like that.

• Equium A60-173 - after update BIOS not boot

  Hi, I have a Toshiba Equium A60 - 173 running Windows XP.

  I just tried to update the BIOS and everything was fine until it stops and does not turn on. I waited and waited and then it turned on myself. The result is a black screen or maybe even screen does not turn on. I left it for about 5 minutes then thought that he had crashed then tried to put out of service to restart. The power button does not respond so I left a little longer, then removed the battery)

  Now, the laptop does not start, I press the power button and get: beeeep beeeep beep beep then it shuts off: S
  I'm lost and I hope that I didn't destroy my girlfriends laptop!

  Any help or tips/steps very appreciated!

  Thank you

  Hello

  Unfortunately, if the BIOS update fails you can do nothing because the ROM module needs to be reflashed to a technician for laptop

  If you need to contact a service partner in your country and ask for help. Guys can you help get rid me of this.

• HP a6720f BIOS not finding not led half the time!

  Yesterday, I noticed a problem with my Pavilion of MP (with Windows 7 Home Edition): first of all, the machine has slowed to a crawl. Each click of the mouse seemed to take 2 minutes (with the small cursor going in a circle). I finally gave up and rebooted. The BIOS could not find readers, burner HD or DVD! After several attempts, the BIOS found the HD, but instead of its name, it was gibberish (and he could not find the OS). Many others and all of a sudden he found both and booted up Windows. Everything worked normally for a while, except that the DVD could not read any disks. I even rebooted several times with success. But then he began to do the same thing again and this time he won't spend more than a few minutes before the mouse clicks take an eternity and then, suddenly, he flashes a blue screen to me (for just a fraction of a second) and goes to this first start screen, which allows you to press F10 to the Setup utility.

  I unplugged the DVD player, in the case that was the problem, but it can not find the HD half the time. If I use the configuration of the BIOS or PC diagnosis, everything works normally. I've never had an accident it! (But PC Doctor usually can't find the HD).

  I tried to connect the HD to another SATA port. No luck. I ordered a new DVD player, to see if I can start from that, but it has yet to come.

  I'm so frustrated! Thank God I didn't throw my old gateway. I use it now, and I can see why I replaced it.

  I wouldn't invest in a new HD if there was a MB problem. And by the way, how HP Bill for a new motherboard, anyway?

  Sign me up 'puzzled in Alabama.

  Well, people, the motherboard has arrived from China, and so far, the computer works fine! (It was 2 days. It never lasts until before long after his bad start.) I put some Arctic Silver on the northbridge chip because the old stuff was dried up. Be careful, there are drivers near the chip and Arctic Silver conducts electricity! The motherboard (from Digital Anny on EBay) is used, but the version of the BIOS is newer than what I had. It seems to be in very good shape. I hope that-, it crashes I won't waste more money on this computer. I realize now that I could buy a new MB (another type) for half what I paid for it.

• RAM Dell XPS one 2710 question does not start with more than 2GB of ram

  Hi, I recently updated to Win10 I've taught it will be easier way for installation after upgrade fees, but the reset button does not work so I decided to return to 8.1. I copied version UEFI victory to USB and restarted the victory while pressing F2, but the computer does not restart "just black screen even no Dell logo" so I turned it off, back on and same story. Then I disassembled the pc and know that no matter what combination I do the computer not start until there are just 2 GB or less ram in slot I have 1 x 4 GB 3x2GB and 2x1GB any variation as possible, you can imagine I tried close up with the same result. If there is more than 2 GB of system ram won't start. No idea where is the problem? for 2 years this computer worked perfectly.

  PS: Does anyone know how to reflash the BIOS I have spin A12 which is the most recent, but I want to just make sure that the BIOS is not messed up. DELL utility allows not only update reflash. Does anyone know how to force the upgrade of BIOS?

  So I found the problem, it's a BIOS. I tried to reset it in PIN on MB and it did not help removed battery no change I found that the BIOS utility can be forced thru cmd. So I did and the finishing of the bios update successful she even seems scary cos for any computer freezes. but that came on and after several early I can again use all the RAM slot with what ram size I want.

  How to force the update of the BIOS...
  Open cmd as administrator
  and run the exe with command extra /forceit in my case "A12.exe /forceit".
  Voila BIOSupdate is running

  Simple but time fly. hope it helps someone too.

• Does not start, need more and more memory, then crashes. It is SOLVED by deleting DB, panacea.dat, foldertree.json CAUSE global messages: uknown

  As a user of Thunderbird long term (currently version 38.2.0 on Win7 x 86 US) today, I caught myself (negatively) by the following problem: at the launch at the start of Thunderbird, the window will appear last closed (and for a short while, I see my files, etc., as left behind, during the last closure of Thunderbird), but then it turns into State "Not responding" (nothing works). When we look in the Task Manager, I see that Thunderbird seizes more and more memory, before this date - after a few seconds - crashing. I really hope that for some help fast, if possible (I desperately need a solution for e-mail job well - ideally the one I had, i.e. Thunderbird with my settings).

  What I tried:
  -Uninstall Thunderbird and install it again (did not help)
  -Uninstall Thunderbird and install an older version (I tried 38.1.0, 38.0.2, and 31.8.0 - nothing has worked)
  -from Thunderbird in SafeMode (same problem)
  -from Thunderbird in safe mode of Windows (same problem)
  -from Thunderbird in offline mode (did not help)

  My main question to know how to solve this problem, includes questions such as
  ? Should I try to delete some files of Thunderbird and try again (which ones?)?
  ? Can I use a command line "tricks" to get Thunderbird started?
  Etc.

  Thanks for your help!

  I think I solved my problem: delete messages from global reach DB and panacea.dat foldertree.json helped - once Thunderbird started again interactively and now I can restore my data files/messages.