MD3000i - Windows Disk Manager fails to initialize the disk

Similar Questions

• Error: Failed to initialize the window when trying to play the game

  Original title: failed to initialize the window

  Due to a virus I had to restart and make my computer cleaned.  I was able to play Iwin games before the clean and since I put everything back in but when I went to go play the game, it is said that the window could not initialize and suggested that I have change the depth of color and display.  What that means and what should these elements will be set to be able to play the game?

   
  Hi duchesszachman,
   
  1 are you play games online using the web browser?
   
  As the error message recommend to change the display settings and color. Try these steps and check the result.
  Step 1: Apply the best display settings
  a. see getting the best display on your monitor
  b. check if the problem persists.
   
  Step 2: Check the updates of Windows to see if there is an update available for the video card
  see automatically get recommended drivers and updates for your hardware .
  b. Once you have applied the update, restart the computer so that the changes take effect.
   
  Step 3: If the problem persists, reinstall the game and check the result.
   
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Failed to initialize the installation program. Error 110. On Windows XP.

  Whenever I try to install LV6.1 or LV6.1 DSC Run-Time system, on my Windows XP machine, I always get the following error message:

  Failed to initialize the installation program. Error 110.

  I think it has something to do with the MSI or "Windows Installer". I tried to uninstall all of THE products of National Instruments, but it did not help. Any ideas?

  Hello. Thank you. I tried, but in fact, it did not help. However, after doing a little research on our, I found a solution by following these steps:

  1. reboot Windows XP in Safe Mode
  2. double-click on the Setup program to start the installation process
  3 cancel the installation process after it starts
  4. restart windows in normal mode

  Now, all my applications of MSI with setup.exe work correctly! Quite strange. Just for the record: this problem was not due to a Virus protection program (as all assumed first that many people) and it kept me from running applications (MSI?) of ANY installer from a CD.

• The CC extensions manager fails to start with a message "failed to initialize the extensions Manager.

  I installed via Adobe Updater CC CC extensions Manager. When I try and launch the CC extensions Manager, a dialog box appears and says: "failed to initialize the extensions Manager. It won't let me open up after I click OK and it closes.

  The CC extensions manager would conflict with Extension Manager CS6? Other possible solutions?

  I tried to restart, all the CC (and CS6 are up-to-date), and I tried to uninstall and reinstall the CC extensions Manager. Nothing has worked so far.

  Let me know... Thank you!

  Solved.

  What worked for me:

  1 remove an installed copy of the CC extensions Manager

  2. disconnect from the corporate network, log in as a local administrator

  3. download Extension Manager CC of Adobe - Exchange: download Adobe Extension Manager

  4 install

  5 kill the synchronization process of basic creative cloud with the Task Manager

  6. go in C:\ProgramData\Adobe\Extension CC\Configuration\DB Manager and remove or rename the ExMan.db file

  7. start Extension Manager and install extensions

• Windows Boot Manager failed error

  NB: I have a very short time. her tomorrow. I have a very glitchy w4 Iconia, who has been with us for a day and night, with several screen flickers and this problem I am submitting. Boot Manager Windows failed to start my iconia, which means I can't even swtich it took off. After two other messages come iup which are almost the same, the message: "Default Boot Device missing or startup failed. Insert the recovery media and press a button, then select "Boot Manager" to choose a new device Boot or Boot Recovery Media. "The two Previos are"1. Windows Boot Manager start failed. "and"failed to initialize the Windows Boot Manager. "I'm experienced in it so I know that something has gone wrong with the boot process, so nothing else running this error start freaking program other some other starnge treats that i have no knowledge of. the next screen that is displayed after the third popup says

  Menu Option to start 1. Manager start Windows ESC to exit

  Bluetooth doesn't seem to be running so im stuck with by clicking on windows boot manager which throws me through this lopp everywhere again. Ive plugged my tablet on my computer but it doent seem to be recognized as a disconnected device.ive it in fear of this charge as the race to the bottom of the stack seemed work very well on my mini ipad when it gopt stuck in a screen.i gel do not think the iconia will start correctly after he sinks since I don't have any medium of recovery and I have a deadline. that is tomorrow morning. knowing that the iconia has a max of 9 hours batterylife, I'm sure the battery rundown will work. Please advice cocoralie knowledge. If you are bored to my typos, please llok in my entry in the welcome forums.

  Hurtling down the battery seems to have solved the problem! Works great! No I don't think that there is a malicious, just stuff software in the code.

• Whenever I connect to my computer I get this message: «assert in LSP...» Failed to initialize the mutex. ERR = 5 "

  original title: everytime I log in I get this message... Assert in LSP... Failed to initialize the mutex. ERR = 5./common/shared_memory_ptr.h:188

  X assert in LSP

  fake

  Failed to initialize the mutex. ERR = 5

  ./Common/shared_memory_ptr.h:188

  Abort retry ignore

  What this means... what should I do to fix this

  If I go to any site... it redirects me to one of the CHOICES... Lost IM really have no computer knowledge

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode with network and check if the same problem occurs:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  It will be useful.

• Failed to initialize the DFX audio enhancer

  original title: DFX audio enhancer and Windows 7 compatibility issues

  DFX audio enhancer was recently released with an upgrade to improve mobile music programs.

  I have a laptop more recent (11/11) with Windows 7 Service Pack 1.
  Update downloaded DFX and now receive an error message stating:
  "Failed to initialize the DFX.
  Please reinstall DFX.
             

  DFX audio enhancer was recently released with an upgrade to improve mobile music programs.

  I have a laptop more recent (11/11) with Windows 7 Service Pack 1.

  Update downloaded DFX and now receive an error message stating:

  "Failed to initialize the DFX.

  Please reinstall DFX.

             

  Hello, Steve.

  See if that helps

  Internet Explorer 9 may stop responding if the DFX Audio Enhancer is installed http://support.Microsoft.com/kb/2727797/en-us?SD=RSS&SPID=15672 Alternatively, you can try to install using compatibility mode. http://social.technet.Microsoft.com/forums/en-us/w7itproappcompat/thread/cdd894f8-1ee2-43e5-952b-d04c25779a7f Contact technical support DFX http://www.FXsound.com/

• Failed to initialize the Application example in Hyperion Planning

  Hello
  
  I'm new on Essbase and Hyperion EPM system 11.1.1.1.0 and I'm trying to test the functionality of planning. I have installed and configured the EPM system, and when I run the Diagnostics of the EPM system, everything is successful unless connecting to Essbase Studio Server (which is a separate issue from another thread).
  
  I'm working with the example of planning application included with the installation. I followed the instructions given here from the blog of John Goodwin, but I encounter an error when I try to initialize the sample application. I also tried creating the application through the workspace, which is documented here. I get the same error during initialization of the sample application.
  
  I get the error message said: "failed to initialize the sample Application. See the log for more details. "Where this journal of planning? I'm running on Tomcat.
  
  When I try to create the database, following the blog of John, through the Administration > manage the database > Create, I also am getting an error on step 18 of 21: [console] verification of member formulas. The error reads as follows:
  
  com.hyperion.planning.olap.HspVerifyOutlineException: check the plan failed with the following errors:
  Error [1200497] discovered in the formula of Member for "411100" members
  Error [1200497] discovered in the formula of Member for "412100" members
  Error [1200497] discovered in the formula of Member for members "412200."
  Error [1200497] discovered in the formula of Member for "451000" members
  Error [1200497] discovered in the formula of Member to Member "501111".
  Error [1200497] discovered in the formula of Member to Member "501112".
  Error [1200497] discovered in the formula of Member to Member '501130.
  Error [1200497] discovered in the formula of Member to Member "501240".
  Error [1200497] discovered in the formula of Member to Member "501250".
  Error [1200497] discovered in the formula of Member to Member '511200.
  Error [1200497] discovered in the formula of Member to Member '511300.
  Error [1200497] discovered in the formula of Member to Member '511400.
  Error [1200497] discovered in the formula of Member to Member "511500".
  Error [1200497] discovered in the formula of Member to Member "511600".
  Error [1200497] discovered in the formula of Member to Member '511700.
  Error [1200497] discovered in the formula of Member to Member '511800.
  
  What should I do to get this application example upwards and running so I can see what he does?
  How to initialize the sample application?
  Why can't create a database correctly (without the above error), so I can then load data into the database of the Consol via the Essbase Administration Services Console? Currently, the outline in environmental assessments do not check (it gives me the same list of members of the above error messages), and so I can't load the sampleapp_data into the database. If someone saw, please help. Thank you.
  
  -Scott

  Hello

  If you remove the application, back, restart schedule, create the sample application again and initialize you should be fine, then you can return the clock to its normal state.

  You always make the changes on the side planning and when you refresh these changes will be pushed to essbase (which you can see with EAS).

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Error "failed to initialize the Viewer...". »

  I am trying to display a CD Microsoft Office Specialist approved courseware for Excel 2003 and I get the following error

  "Failed to initialize the Viewer. If you installed the Viewer to your computer, rerun Setup. If you access the viewer of a server, contact your system administrator.

  General exception. "

  I tried to run the patch as described on this site in 2006 and the command has been executed but I still get the same message, even after reboot. Someone else recommended to rename one of the files windows32 but it won't let me do - it just keeps asking me to try again. It was previously posted in MELL (Microsoft E-learning library).

  It comes with Vista, upgrade install and activate Forum.

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Excel.misc&lang=en&CR=us

  Discussions in Excel General questions.

  They will help you with your questions Excel in the Office discussion groups above.

  At soon Mick Murphy - Microsoft partner

• ORA-01804: failed to initialize the zone in DB11.2.0.4 information

  Dear Experts,

  I installed Oracle DB 11.2.0.4 to upgrade my current DB 11.1.0.7 to 11.2.0.4.

  When I try to connect to the DB I get the following errors

  [oraerp@ebsvm admin] $ sqlplus / as sysdba

  ERROR:

  ORA-01804: failed to initialize the zone information

  SP2-0152: ORACLE does not work properly

  [oraerp@ebsvm admin] $ sqlplus / as sysdba

  ERROR:

  ORA-01804: failed to initialize the zone information

  
  

  SP2-0152: ORACLE does not work properly

  
  

  I use Oracle linux 86 and I installed the R12.1.1 application.

  
  

  Kind regards

  
  

  Ahmad,

  
  

  
  

  
  

  I found the solution in this Doc ID 1562424.1

• MapBuilder.jar: failed to initialize the appearance: null

  When I try to start mapbuilder using java-jar mapbuilder.jar it crashes:
  
  Failed to initialize the appearance: null
  error: java.lang.NullPointerException
  
  Running 64-bit Linux in a VNC session.
  
  Anyone else seen this?
  
  JAVA_HOME is set.

  Try to use a version of bit java32 (minimum jre 1.5 or later), and to give the full path, I don't know a lot of Linux.

  See you soon
  Nico

  Published by: gerardnico on August 26, 2009 22:26 Add jre 1.5 or later

• Failed to initialize the windows contact 0x000FFF

  Hello
  I need help please. My failed to open windows mail.

  The message.

  1. Contact cannot load Windows Mail was not able to start because MSOE. DLL has not been initialized
  2. Windows Mail could not be started. The application failed to initialize windows 0x8000FFF contacts

  Thank you for your attention.

  Kind regards

  WAN

  Hello

  1 have had any changes made on the computer before the show?

  2. when exactly you get error messages?

  3. don't you upgrade the computer from the Windows XP operating system?

  Method 1:

  I suggest you to follow these steps and check if that helps:

  a. navigate to the location of the Contacts folder.

  b. right click on the contacts folder, and then click Properties.

  c. switch to the location tab, and then click restore defaults.

  d. now try to open Windows Mail and see if the contacts are initialized correctly.

  Method 2:

  Check the link and see if it helps:

  Solve problems with Windows Mail

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

• Failed to initialize the library for the assembling and disassembling workstation virtual disks 9

  I am using VMware Workstation 9.0.4 build-1945795 and have a problem with "map of the virtual disks. I tried map a virtual drive on windows server 2008 r2, windows server 2008, windows 7, windows xp, windows 2000, windows 98, and BACK 6.22. I have went to the file - card virtual disks and get 'Could not initialize the library for the Assembly and disassembly of the virtual disks', every time I have try to map any operating system for the virtual machine. Some have snapshot while others do not is a mixture of 64-bit and 32-bit virtual machines. My system is Windows 7 Enterprise 64-bit. What I'm missing here because if a feature is available in the menu you seem to expect it to work actually on something.

  OK the fix for me was that I had to uninstall VMware workstation and now it seems to work very well on all the OS preceding reinstall it.

• Profile Manager - failed to install the remote access profile in the domain environment & multi-Active Network Directory

  Hi all

  I am a COMPUTER administrator for a college and I am trying to fix what seems to be the last hurdle in getting the Profile Manager works correctly.

  I worked for a while now trying to get the Profile Manager capable of pushing the device and profiles for Mac in our group network environment. I was able to operate intermittently, but not often. Most of the time I'm unable to install the remote management profile.

  When you try to install the remote management profile, I give myself one of the two errors-

  The first error is:

  The Installation of the profile failed.

  The «TeleManagement (com.apple.config. » profile (Server.FQDN.mdm:GUID) "could not be installed because of an unexpected error < MDMResponseStatus:500 >

  (Obviously server.fqdn and GUID are placeholders for their actual values)

  

  The second mistake is:

  The Installation of the profile failed.

  Failed to contact the Protocol SCEP server to ""http://server.fqdn: 1640/CEP / "."

  

  The server Mac OS X 10.11.4 works

  OS X Server is version 5.1

  Client Mac is for most running 10.10.4

  Here's a quick run down on the environment and the steps I have already taken to solve the problem.

  • The network is an Active Directory with several networks multi-domain environment. I mainly work with two different networks, each associated with one of the two areas.
  • The Mac server hosting the Profile Manager is a Mac Pro. The two network cards is used, each on one of the two networks. The Mac server is joined to the domain in the primary forest.
  • I opened all the ports and IP ranges for Apple's Push Notification service for two on our firewall and tested networks between the two networks to ensure that the AFN is accessible.
  • I created a static DNS entry for the server in the DNS zone for the main domain. I also have a separate DNS zone for the DNS record for the interface on the secondary network. I also confirmed that Macs see the correct IP address of the Mac server for their network.
  • I tried to change the settings for network access for the Profile Manager. The first error seems to happen when the Profile Manager are restricted to the network the Mac client is not connected. This same error also occurs if I open Manager profile access to "all networks".
  • I have experiemented with the different certificate types. In general, I use the self-signed certificates that are generated automatically. In this scenario, I install the profile Trust first (which works seamlessly regardless of network or domain). I also tried to use a certificate for Code signing signed with our own CA to sign the profile of remote management. The same errors will occur no matter what certificates are used.
  • The second error occurs when the access profile manager is limited to the same network that is connected to the Mac client
  • I ran Wireshark captures on several client computers, as well as on the Mac server interfaces and haven't seen any traffic blocked or rejected that seemed related to the Profile Manager
  • I've deleted and rebuilt my OD master
  • I also scoured newspapers for clues Profile Manager and haven't found much
  • In addition, I have also studied the problem and error codes/etc widely and have not found a lot of useful information
  • I don't know there are any other troubleshooting steps I took as well, but I've been question bout this for awhile and I don't remember everyone.

  That's a strange thing - I had it working for Mac on the main network and the domain. However, I discovered that the Mac on the secondary network and the field was unable to download the profile of remote management. This is when I started to change the Profile Manager, access network, which eventually introduce the problem on Macs connected to the primary/field of experimentation network. Change access return settings in Profile Manager does not restore functionality for pimps who worked.

  Another thing odd in this test scenario all - Mac on the network high school/area would not install remote profile unless management I temporarily moved it to the main network (I do not untie / reassign to one the main domain on these Macs) I could get the profile of remote management to install and then pushing profiles has worked. Even more strange, it's the Mac that I had to move temporarily secondary network to the main network to allow remote management profile install only works always as long as the Profile Manager are restricted to the secondary network and 'the Mac'. However, Macs in the same room, on the same network in the same field, using the exact image even get the errors described above.

  The only thing I have not yet done is delete/reconstruction Profile Manager. I would really like to avoid this if possible. Solutions that involve something like Casper or other software integration AD for Macs are also a non-starter.

  I'm happy to elaborate if necessary. I appreciate the help.

  Okay, I think I can find the root cause.

  Before this discovery, I had completely rebuilt Profile Manager. Now, I managed by pushing the management profile remote for Mac in the two fields/networks. However, many of them still refuse to install remote management profile.

  Macs who encounter the problem are all were imaged using NetRestore using an image captured from an another similar iMac. IMac even that was used to build the image has now been reassigned in a test of Mac. I found that when you attempt to register one of the Mac who had received this image it shows already as "registered" when you go to "mydevices" on my Mac server. I also noticed that they all have the serial number of the test Mac when viewing their "register". Among the issues of Macs, I activated the lock of the device from the page "mydevices" for the so-called problematic Mac registered (showing the serial number of the iMac used to create the image) and it locked the iMac used to create the image - not the Mac issue.

  This tells me that the CID (or Mac equivalent) is set on the Mac CID used to create the image for all of the Mac said image was deployed to. If it's a Windows box I have a sysprep prior to deployment or could perform a rearm after the fact. I am unaware of how to perform similar functions in OS X.

  I tested also since on some Macs that do not have this image, and they are able to register and install the profile of Managing remotely with success.

  If anyone has any suggestions on how to reset the CID (the computer ID) under OS X, I'd appreciate it. Thank you.

• Error scan Dell: failed to initialize the selected paper source

  My Dell Scanner doesn't scan.  error message: failed to initialize selected paper source. Thanks for your help with this.  It's a Dell Photo 926

  Hello

  From my research, I want to suggest to follow the steps mentioned below:

  (a) make sure that you have installed all Windows updates, you can either install update via Windows Update or download it manually. Here I recommend you to install the latest Windows 7 and Windows Server 2008 R2 Application Compatibility Update.

  Windows 7 and Windows Server 2008 R2 Application Compatibility Update

  http://support.Microsoft.com/default.aspx?kbid=974332

  b) unplug the printer.

  c) download Dell Photo all-in-One Printer 926 Patch to completely remove the printer from your computer. You must run this patch until he asked to restart the computer.

  Reference the Dell Photo all-in-One Printer 926

  http://www.Dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats?c=us&l=en&s=BSD&CS=04&DriverID=R166248

  (d) restart your computer.

  (e) to download the compatible driver Windows 7.

  Dell Photo 926 all-in-one printer

  http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Hardware&p=Dell%20Photo%20926%20All-in-One%20Printer&v=Dell&uid=DELL926&pf=0&pi=3&c=Printers%20%26%20Scanners&sc=Multifunction&os=64-bit

  (f) install the driver when connecting the printer (power on) via a USB cable.

  Hope this information helps.