MDB cannot bind to the queue via foreign JNDI

Hi all

I have an MDB (configured with annotations) that I want to connect to a queue on a remote Instance of Weblogic. I made available to the local instance queue foreign using JNDI. I got this job in the previous configurations, but now I get the MDB error messages:

javax.naming.NameNotFoundException: could not resolve ' weblogic.jms.backend.Messaging - Server "." Solved "weblogic.jms.backend"; another name "mail server".

"Mail - server" here is the name of the JMS server on the remote instance and the name is not available in the remote instances JNDI tree, in the local (which should be correct imo).

I had the installation works with the same server configurations when using the same MDB configured manually with set of deployment descriptors. I also had the version of the annotation of work when using local queues to JNDI. And I am able to send messages to the queue for foreign aid JNDI.

The difference that I am aware of so far is with the annotated version, that I was not able to specify the ConnectionFactory JNDI name because I have not found an annotation for her and not examples. But if this is the problem why it works using local queues?

Do I have to specify a foreign JNDI link bearing the name of the e-mail server so it can be accessed on-site? But, if so, why it works with the version without annotations?

Here, the pointers are welcome because I really have no idea what I could check.

Thanks, Chris

Hi Christian,

My guess is that the exception is due to an attempt to use a JMS connection that is connected in the local cluster to communicate with a destination in a WebLogic JMS remote cluster, which of course will not work.

If the destination of the source for an MDB is on a foreign seller or another WebLogic cluster, you need to inject somehow a reference to the remote destination and the factory remote connections. Normally this is done via the following steps (1) set up a Server JMS 'strangers' with the URL/user/pass of the remote JNDI, (2) set up a foreign destination and the name of factory for foreign connections on the foreign JMS server that maps each remote JNDI name in a JNDI name local, installation (3) to the top of the MDB to reference the JNDI local connection factory and the remote JMS destination mappings.

Once you have set up the foreign JMS server, see if it works:

@MessageDriven(mappedName = "MyQ", activationConfig = {
@ActivationConfigProperty(propertyName = "connectionFactoryJndiName", propertyValue = "MyCF")})

I'm not sure if it's necessary, but you might also want to try these:
@ActivationConfigProperty(propertyName = "destinationName", propertyValue ="MyQ")
@ActivationConfigProperty(propertyName = "destinationType", propertyValue = "javax.jms.Queue"),

I did not try it myself, but I think it'll do the trick.

Tom

Tags: Fusion Middleware

Similar Questions

Cannot clean up the queue and print the new document

All of a sudden in trouble with my C6180 all-in-One. It didn't print a document remaining queues. Tried everything to clean up the queue. But nope. Document is in the list. Document status information: deletion. And never remove the ends. Right now my printer is not a printer. Can anyone help?

Hello

In Control Panel, open administrative tools and select abuse. Scroll down to the print spooler service, right click and select Properties, then click the Stop button. Now search for C:\Windows\System32\Spool\PRINTERS, then delete the tasks within this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

Restart the computer and you should find that the documents have been deleted.

Kind regards

DP - K

2009 time capsule cannot connect to the internet via a modem

I had my 2009 Time Capsule or airport works very well with the modem from my ISP for years. I use the TC a hub wireless and backup. The upgrade of the modem: no problem. Over the weekend, there was a failure of the internet that has since been corrected for days. Since my TC failed to connect to the internet via the modem. I can get online via an ethernet cable from the modem to my two computers (one is a janky PC, the other bought a MacBook Pro in 2015), so I know it's not the modem.

I turned off and reset the modem several times. I turned off and reset the TC, repeatedly. I've reconfigured the TC twice per the instructions found in other discussions here. I _may_ not having the latest version of the software installed, but this has never been a problem in the past. Reconfiguration will display a green light, but in the diagnosis of the airport, it shows that it has not Internet even when connected via the Ethernet cable to the modem to work. Icons wireless on my laptop an exclamation or a warning icon.

The cable operator suggested that sometimes the router manufacturers 'close the ports' and must be reopened if the connection is down for awhile. It makes no sense to me, but I'm not very technical.

Any thoughts? Thank you very much

Renee

What is the number and the model of the modem?

There is a connection by Ethernet cable from the modem to time Capsule. The cable is connected to which port of the modem? The cable is connected to which port on the Time Capsule?

If you open AirPort Utility on your Mac... (Finder > Applications > utilities > AirPort Utility)... is displayed the image of the time Capsule? If Yes, when you click on the image, a small window pops up with an edit box... or... an option for installation manual appears at the bottom of the window?

I cannot connect to the Internet via an Ethernet cable but I am able to connect with other devices.

Original title: deleted Ethernet adapter

Hello

All trying to fix my computer run Registry cleaners, I managed to delete my Ethernet adapter, I have taken steps to try to fix this problem and have been advice to visit Microsoft support for help.

I have a Dell Dimension 5100 and am running Windows XP, I am unable to connect to the Internet via an Ethernet cable but I am able to connect with other devices.

First of all, I contacted my Internet provider which forced me to various checks to see why I was getting a message saying acquiring network address and it seemed that I had no IP address and could not connect. He eventually get look in the network adapters Device Manager, he demonstrated Intel PRO/100 VE network connection that is activated in the State shows that it works, but there is no Ethernet adapter shown in this place.

I tried to insert Dell drivers and utilities disk, but that does not change.

I tried to download on an other computer files from dell that look like they are pilots.

I tried to set up a new connection

None of what I tried so far seems to have worked, can anyone suggest what I can do to fix this?

Thank you

Kevin

Hello

1. what you're trying to fix by running registry cleaners?
2. How did you remove Ethernet card?
3. How are you online using other devices?
4. What are the devices are?

Intel PRO/100 VE network connection is the Ethernet adapter on your computer. The following articles may be useful:
How to troubleshoot possible causes of Internet connection problems in Windows XP
http://support.Microsoft.com/kb/314095
Windows wireless and wired network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

Cannot conect to the internet via a wireless connection secure, despite having completed the restoration of the system.

I have a Dell laptop which does not connect to the internet via the wireless connection. I can connect via a line to broadband, but not the wireless. My work PC and iPad are connect. I tried compand repair network and he says that the problem is resolved. I tried a system restore a week before that the problem started.

Any other suggestions? Thank you

Most often when a device is not it's because of a driver. Try reinstalling your.

It works for vista, win 7 & 8

http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

http://captaindbg.com/how-to-update-drivers-on-Windows-7/

EPC2203 modem cannot connect to the Mac via USB?

I searched all threads and you can't find something to solve my problem.

My ISP sold me the modem Scientific Atlanta EPC2203 cable recently. I can't connect it to my Mac (10.5.7) via ethernet no problem at all. But I can't get a connection via a USB port. The modem operating manual mentions for Mac OS X USB connectivity, but does mention all the details on how to establish the connection: we talk about the installation of PC drivers. Supplied with the modem installation CD only applies to the PC, it seems that I have to take extra steps such as installing a Mac driver? I couldn't find the Mac drivers adapted on internet, then I start to think that this modem is not simply done to connect to the Mac via USB?

Any help is very appreciated.

To make your Modem work with USB connectivity, you must install the Modem drivers on your computer. You can try to search for the Drivers that works on the MAC computer or else you can contact the support Tech Atlanta, because they can let you know where you can find the drivers for your Modem. Or well you googled around and you can find the drivers for your Modem which are Compitable MAC.

Cannot return in the queue. AE crashes

Hey,.
I have a really urgent matter. I am currently working on a project with a tight deadline and AE crashes all the time when I put in place a renderqueue with more than one element. AE started the next item in the queue but freezes at frame 0 during rendering.
Then I kill AE, restart and reconnect with my Adobe ID code...
Why should I reconnect with my Adobe ID when AE crashes like that?
In addition, after each rendition. AE throws an error that it could not write the XMP data. This information help?
If I wait for the boot to make it freezed I get a Message 5 minutes which EI could not connect the converter BG.
This also happens if I made one after the other...
(then I tried to make with Media Encoder, but that little * does return on a layer motion blur because the transformation of collapse switch layers is on--in any case, it is another story - but the collapse layer processing has so many bugs in there when it comes to 3d layers)
Really, it drives me crazy
I am currently working with cc14. Is this an upgrade help? Where can I get more problems with this software bug. I was always afraid of an update cc15 because of all the people of bugs reported...
Windows 10
ABO of cloud of CC
Need help. Quick. Please, I beg you!
Thank you guys

Updated cc2015 resolved questions

Cannot connect to the XMLDB via http, ftp, webdav

I can connect to XDB through a DEV instance on the same server, but cannot connect to the instance SCIDEV. The differences are THAT DEV is nls_characterset WE8MSWIN1252. SCIDEV is AL32UTF8. DEV has ports 8080 and 2100. SCIDEV has ports 8089 and 2102. HTTP request continuously a user / password without error. Watch FTP authentication failed. WebDAV continually requires a user name and password. I've tried a few things with no luck yet. What should I do to be able to connect? It is also published in Oracle support as SR 3-3043961271 technique. Please do not share the files downloaded in this forum SR.

Follow the different SQL commands. Running Windows2003 Server and Windows XP SP2 client.

SYSTEM@scidev> select * from v$version;
Oracle Database 11g Release 11.2.0.2.0 - Production
PL/SQL Release 11.2.0.2.0 - Production
CORE    11.2.0.2.0      Production
TNS for 32-bit Windows: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production

5 rows selected.

SYSTEM@scidev> select * from nls_session_parameters;

PARAMETER                                VALUE
---------------------------------------- ---------------------------------------
NLS_LANGUAGE                             AMERICAN
NLS_TERRITORY                            AMERICA
NLS_CURRENCY                             $
NLS_ISO_CURRENCY                         AMERICA
NLS_NUMERIC_CHARACTERS                   .,
NLS_CALENDAR                             GREGORIAN
NLS_DATE_FORMAT                          DD-MON-RR
NLS_DATE_LANGUAGE                        AMERICAN
NLS_SORT                                 BINARY
NLS_TIME_FORMAT                          HH.MI.SSXFF AM
NLS_TIMESTAMP_FORMAT                     DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT                       HH.MI.SSXFF AM TZR
NLS_TIMESTAMP_TZ_FORMAT                  DD-MON-RR HH.MI.SSXFF AM TZR
NLS_DUAL_CURRENCY                        $
NLS_COMP                                 BINARY
NLS_LENGTH_SEMANTICS                     BYTE
NLS_NCHAR_CONV_EXCP                      FALSE

17 rows selected.

SYSTEM@scidev> select * from nls_database_parameters;

PARAMETER                                VALUE
---------------------------------------- ---------------------------------------
NLS_NCHAR_CHARACTERSET                   AL16UTF16
NLS_LANGUAGE                             AMERICAN
NLS_TERRITORY                            AMERICA
NLS_CURRENCY                             $
NLS_ISO_CURRENCY                         AMERICA
NLS_NUMERIC_CHARACTERS                   .,
NLS_CHARACTERSET                         AL32UTF8
NLS_CALENDAR                             GREGORIAN
NLS_DATE_FORMAT                          DD-MON-RR
NLS_DATE_LANGUAGE                        AMERICAN
NLS_SORT                                 BINARY
NLS_TIME_FORMAT                          HH.MI.SSXFF AM
NLS_TIMESTAMP_FORMAT                     DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT                       HH.MI.SSXFF AM TZR
NLS_TIMESTAMP_TZ_FORMAT                  DD-MON-RR HH.MI.SSXFF AM TZR
NLS_DUAL_CURRENCY                        $
NLS_COMP                                 BINARY
NLS_LENGTH_SEMANTICS                     BYTE
NLS_NCHAR_CONV_EXCP                      FALSE
NLS_RDBMS_VERSION                        11.2.0.2.0

20 rows selected.

SYSTEM@scidev> select * from dba_errors;

no rows selected

SYSTEM@scidev> select count(*) from dba_objects
  2  where owner='XDB' and status='INVALID';

       COUNT(*)
---------------
              0

1 row selected.

SYSTEM@scidev> select comp_name, status, version from dba_registry
  2  where comp_name='Oracle XML Database';

COMP_NAME
---------------------------------------------------------------------------------
STATUS                                       VERSION
-------------------------------------------- ------------------------------
Oracle XML Database
VALID                                        11.2.0.2.0


1 row selected.

SYSTEM@scidev> show parameter dispatchers

NAME                                 TYPE        VALUE
------------------------------------ ----------- ------------------------------
dispatchers                          string      (PROTOCOL=TCP) (SERVICE=scidev
                                                 XDB)
max_dispatchers                      integer     NULL
SYSTEM@scidev>

SYSTEM@scidev> select dbms_xdb.gethttpport from dual;

    GETHTTPPORT
---------------
           8089

1 row selected.

  1* SELECT DBMS_XDB.getaclDocument('/home/').getClobVal() FROM DUAL
SYSTEM@scidev> /
<acl description="Public:All privileges to PUBLIC" xmlns="http://xmlns.oracle.com/xdb/acl.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.oracle.com/xdb/acl
.xsd                           http://xmlns.oracle.com/xdb/acl.xsd" shared="true">
  <ace>
    <grant>true</grant>
    <principal>PUBLIC</principal>
    <privilege>
      <all/>
    </privilege>
  </ace>
</acl>


1 row selected.

SYSTEM@scidev> 
  1* SELECT DBMS_XDB.getaclDocument('/home/pharma').getClobVal() FROM DUAL
SYSTEM@scidev> /
<acl description="Private:All privileges to OWNER only and not accessible to others" xmlns="http://xmlns.oracle.com/xdb/acl.xsd" xmlns:dav="DAV:" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://xmlns.oracle.com/xdb/acl.xsd                           http://xmlns.oracle.com/xdb/acl.xsd" shared="true">
  <ace>
    <grant>true</grant>
    <principal>dav:owner</principal>
    <privilege>
      <all/>
    </privilege>
  </ace>
</acl>


1 row selected.

Status of the listener follows

D:\oracle>lsnrctl status

LSNRCTL for 32-bit Windows: Version 11.2.0.2.0 - Production on 02-MAR-2011 12:40:57

Copyright (c) 1991, 2010, Oracle.  All rights reserved.

Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))
STATUS of the LISTENER
------------------------
Alias                     LISTENER
Version                   TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Production
Start Date                21-FEB-2011 22:58:56
Uptime                    8 days 13 hr. 42 min. 2 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   D:\oracle\path\network\admin\listener.ora
Listener Log File         D:\oracle\path\listener\alert\log.xml
Listening Endpoints Summary...
  (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521)))
  (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC0ipc)))
  (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=8089))(Presentation=HTTP)(Session=RAW))
  (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=2102))(Presentation=FTP)(Session=RAW))
  (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=8080))(Presentation=HTTP)(Session=RAW))
  (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=2100))(Presentation=FTP)(Session=RAW))
Services Summary...
Service "DEVXDB.aa.ad.epa.gov" has 1 instance(s).
  Instance "dev", status READY, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
  Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "dev" has 1 instance(s).
  Instance "dev", status UNKNOWN, has 1 handler(s) for this service...
Service "dev.aa.ad.epa.gov" has 1 instance(s).
  Instance "dev", status READY, has 1 handler(s) for this service...
Service "scidev.aa.ad.epa.gov" has 1 instance(s).
  Instance "scidev", status READY, has 1 handler(s) for this service...
Service "scidevXDB.aa.ad.epa.gov" has 1 instance(s).
  Instance "scidev", status READY, has 1 handler(s) for this service...
The command completed successfully

D:\oracle>

Http and ftp to SCIDEV ports are resolved in Enterprise Manager at 8089 and 2102.

FTP log follows. First connect you to DEV successfully. Then connect you to SCIDEV fails.

WINSOCK.DLL: WinSock 2.0
WS_FTP95 LE 4.60 98.03.17, Copyright © 1992-1998 Ipswitch, Inc.
local chdir to c:
- -
connecting to localhost:2100
Connected to localhost port 2100
220- servername
Unauthorised use of this FTP server is prohibited and may be subject to civil and criminal prosecution.
220 servername FTP Server (Oracle XML DB/Oracle Database) ready.
USER xdb
331 pass required for XDB
PASS (hidden)
230 XDB logged in
PWD
257 "/" is current directory.
Host type (I): UNIX (standard)
PORT theIPaddress,15,15
200 PORT Command successful
LIST 
150 ASCII Data Connection
Received 250 bytes in 0.1 secs, (20.00 Kbps), transfer succeeded
226 ASCII Transfer Complete
QUIT
221 QUIT Goodbye.
local chdir to c:
- -
connecting to localhost:2102
Connected to localhost port 2102
220- servername
Unauthorised use of this FTP server is prohibited and may be subject to civil and criminal prosecution.
220 servername FTP Server (Oracle XML DB/Oracle Database) ready.
USER xdb
331 pass required for XDB
PASS (hidden)
530 login error
! Logon failure, so quitting

But I can log in with the same user in sql plus

SYSTEM@scidev> connect xdb@scidev
Enter password: ***********************
Connected.
XDB@scidev> select user, sysdate from dual;

USER                           SYSDATE
------------------------------ ---------
XDB                            02-MAR-11

1 row selected.

XDB@scidev>

This is starting to look like bug 6049194. Please open an S/R with Support of Oracle

Cannot bind to the shared object created with LabVIEW 2009

I have problems referring to a shared library built from a LabVIEW VI under RHEL 5 with LabVIEW 2009.

To illustrate the problem, I created a VI with a digital input and output that corresponds to a certain number. Then, I created a draft specification of build to create a shared library with a feature that makes use of this VI square. The shared object is created successfully (square.so).

When I try to compile a test application written in C, that connects to this library, I get errors in the following link:

cc  -I/usr/local/natinst/nidaqmxbase/include -I/usr/local/natinst/LabVIEW-2009/cintools build/square.so  test.c   -o test/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_istream >& std::basic_istream >::_M_extract(float&)@GLIBCXX_3.4.9'/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_istream >& std::basic_istream >::_M_extract(double&)@GLIBCXX_3.4.9'/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_istream >& std::basic_istream >::_M_extract(double&)@GLIBCXX_3.4.9'/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_ostream >& std::basic_ostream >::_M_insert(double)@GLIBCXX_3.4.9'/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_istream >& std::basic_istream >::_M_extract(float&)@GLIBCXX_3.4.9'/usr/local/lib/liblvrtdark.so.9.0: undefined reference to `std::basic_ostream >& std::basic_ostream >::_M_insert(double)@GLIBCXX_3.4.9'collect2: ld returned 1 exit statusmake: *** [test] Error 1

Running ldd reveals that liblvrtdark.so.9.0 is used for the execution of labview.

In order to investigate on what could be the cause of the problem, I have compiled the nidaqmx basic examples, and I don't have an error. Current running ldd as reveals that he uses liblvrtdark.so.8.2 for the view of laboratory, time of execution.

My suspicion is that some components of labview are being compiled with gcc 3.4 while others are being compiled with gcc 4.1 (which is the default compiler in RHEL 5).

Any ideas how I could fix the build errors?

Thanks in advance for your suggestions.

PS.

I enclose a tar file with the source files and here are the details of the ldd:

ldd build/square.so         linux-gate.so.1 =>  (0x008de000)        liblvrtdark.so.9.0 => /usr/local/lib/liblvrtdark.so.9.0 (0x00b9c000)        libc.so.6 => /lib/libc.so.6 (0x00110000)        libstdc++.so.6 => /usr/local/lib/LabVIEW-2009/patchlib/libstdc++.so.6 (0x009a7000)        libm.so.6 => /lib/libm.so.6 (0x00756000)        libdl.so.2 => /lib/libdl.so.2 (0x00256000)        libpthread.so.0 => /lib/libpthread.so.0 (0x0025a000)        /lib/ld-linux.so.2 (0x00b80000)        libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x00272000)

ldd /usr/local/natinst/nidaqmxbase/lib/libnidaqmxbase.so.3.3.0         linux-gate.so.1 =>  (0x00e50000)        libnidaqmxbaselv.so => /usr/local/lib/libnidaqmxbaselv.so (0x00248000)        libc.so.6 => /lib/libc.so.6 (0x00689000)        /lib/ld-linux.so.2 (0x00b80000)        liblvrtdark.so.8.2 => /usr/local/lib/liblvrtdark.so.8.2 (0x00e51000)        libdl.so.2 => /lib/libdl.so.2 (0x00813000)        libpthread.so.0 => /lib/libpthread.so.0 (0x001b0000)        libstdc++.so.5 => /usr/lib/libstdc++.so.5 (0x009c7000)        libm.so.6 => /lib/libm.so.6 (0x00b0a000)        libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x0050c000)

Hi mimi,

I'm happy to report that I managed to get the code to work. I have included some of the steps I experienced the problem in case it might help improve the documentation or future generations.

In response to your question about the "error 1" reported by do, it's just an indication that detected a compiler error (it probably resembles the return code of the compiler).

The errors ' undefined reference... @GLIBCXX_3.4.9 "have been narrowed down. The generated labview shared library, the square.so, links to /usr/local/lib/LabVIEW-2009/patchlib/libstdc++.so.6 which is a symlink to usr/local/lib/LabVIEW-2009/patchlib/libstdc++.so.6.0.9. I decided to compare this version of libstdc ++ that included with RHEL:

strings /usr/local/lib/LabVIEW-2009/patchlib/libstdc++.so.6 | grep GLIBCXXGLIBCXX_3.4GLIBCXX_3.4.1GLIBCXX_3.4.2GLIBCXX_3.4.3GLIBCXX_3.4.4GLIBCXX_3.4.5GLIBCXX_3.4.6GLIBCXX_3.4.7GLIBCXX_3.4.8GLIBCXX_3.4.9GLIBCXX_FORCE_NEW

strings /usr/lib/libstdc++.so.6 | grep GLIBCXXGLIBCXX_3.4GLIBCXX_3.4.1GLIBCXX_3.4.2GLIBCXX_3.4.3GLIBCXX_3.4.4GLIBCXX_3.4.5GLIBCXX_3.4.6GLIBCXX_3.4.7GLIBCXX_3.4.8GLIBCXX_FORCE_NEW

So libstdc ++ RedHat does not include a string for GLIBCXX_3.4.9.

With this in mind, I was able to get my test application to compile using the version of LabVIEW libstdc ++ using the following makefile:

.PHONY: all cleanCPPFLAGS=-I/usr/local/natinst/nidaqmxbase/include -I/usr/local/natinst/LabVIEW-2009/cintoolsLDFLAGS=build/square.so \        /usr/local/lib/LabVIEW-2009/patchlib/libstdc++.so.6 \        -Wl,--rpath -Wl,/usr/local/lib/LabVIEW-2009/patchlib/

all: test

clean:        rm -f test *.o

When you try to run the application, I got the following error:

./test: error while loading shared libraries: /usr/local/lib/liblvrtdark.so.9.0: cannot restore segment prot after reloc: Permission denied

But apparently, it's because of SELinux prohibiting the use of libraries shared with moving text.
This can be disabled by running /usr/sbin/setenforce 0 as root.

The test application now works!

See you soon,.

Cannot sync to the device via the serial port

I have to read the data with a DSP associated with an EKG. For this I need 5 bytes (0x00 0x80 0x00 0x80 0x00) in a specific order that are sent through the port every second. I followed the data sent via the port and these 5 bytes are actually get received, however I havnt managed to find with my VI. I tried many different ideas without success and maybe Im doing something wrong. My latest attempt uses a waiting on event so I won't miss all the data. Ideas? See what I'm missing?
I'd appreciate any help!

I think you are using the wrong function. You use Match true/false String. Said context-sensitive help "examine beginning of string to see if it matches the true or false string. This function returns a Boolean TRUE or FALSE value in the selection, depending on whether the string is true or false string. "Well, suppose that the string isn't everything at the beginning, but as another byte in front of her? It will not find the search for string. And the wiring of the same search in True and False are strange because if it is found, then it is both true and false at the same time.

You should use search and replace or search/Split string to determine if and where the search string is inside the largest chain. (I would take research/Split). If the string is not found it returns-1, otherwise it returns the location of the string. And it has the advantage of any return after the game you could feed in the shift register for a search on the next iteration.

HP LaserJet MFP M425dw 400 pro: cannot connect to the printer via USB

Hello

My problem is as follows:

Since December 2014, the HP printer has been connected via USB to the desktop (at the time using windows 8.1) and by the network to other computers. The problem is with the 10 windows desktop where it is widely used for double-sided scanning.

Yesterday morning I came only to find out that HP will not work in no case with Office for Windows 10 USB - connected, changed the ports that are 6, the cables, the office will say it is not connected. However, it connects through network for printing but not scan, it gives an error about Scanner HP not connected but will scan with Windows Scanner and fax with the printer using the scanner for the work of network folder - which can not scan two-sided.

I uninstalled the driver, reinstalled with HP Support Assistant / downloaded directly from HP, same thing. The problem is that it be increased to 99% on the screen that shows the connection to the printer (the one detecting the USB cable) when it will say:

"

Error

A Setup operation took too long to run. It is a fatal error, preventing the use of the product.

If please restart your computer and run this installer again. If the problem persists, please visit the web site of product support for your product. »

I tried the original shipped with the printer CD, it gives the same error message.

If anyone can help I will be very grateful. Thank you!

Too bad! Fixed it myself using the Hp Smart Install supplied with the network interface of the printer.

iPhone cannot connect to the Internet via time capsule

I have a current execution capsule 7.7.7 time. IPhones in my house can't get internet service when it is connected to the time capsule. My iPad, I tap on it now, can get internet time capsule service. My Mac can connect. I restarted the capsule of time with my modem cable many times. My passwords are correct.

I also have a smart Vizio TV that does not connect to the Internet. This is true with wifi and also with a wired connection to the time capsule.

I don't know what the cause of the problem. Any help will be appreciated.

He has worked in the past and now could not or never worked?

Apple routers can sometimes decide autonomously switch to bridge mode. If your cable modem is not a router, you MUST have the apple router... TC in your case DHCP and NAT mode.

If you have not done before you reset the TC at the factory and re-do the installation. Here are my recommendations.

Universal factory reset

Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

The installer the TC.

Then redo the configuration of the computer that you want to use for TM using Airport utility.

1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

for example TCgen5 for the base station and the name of the TCwifi wireless.

If the wireless is still an issue defined wireless names like TC24ghz and assigned the 5 GHz other name... eg.TC5ghz.

Finally, use fixed channels in 2.4 ghz... try 11, 9 and 6, in that order.

(leave the security for a few minutes and see if that makes a difference).

For iphone and TV with problems in your Setup program ensure that the TC is NAT and DHCP... try to use a different such as google public DNS 8.8.8.8 and 8.8.4.4

2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

** 3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC.

Ignore this point if you don't understand it... after the return if you drop questions.

4. be sure that IPv6 is set correctly in the computer. IE link-local only for ethernet or wireless depending on whether you are using. Car is not good enough.

Tell us which modem cable, you have, make and model please?

The TC has problems with some popular brands... one of the SB series a modem port is malfunctioning.

Cannot bind to the server. No common cryptoalgoritm

Upgrade to Firefox v.33. While impossible to make a link to the secure server of the Bank. Got the message "ssl_error_no_cypher_overlap". Can be achieved with any other browser.

Here go us. There is no overlap between the cipher suites, the website of your Bank and your Firefox are supported. This is the reason why you get the error.

You have defined
Security.TLS.version.min: 1
in your Firefox preferences, which is good. This mitigates the attack of a POODLE, but it prevents you to access your bank's website.
https://community.Qualys.com/blogs/SecurityLabs/2014/10/15/SSL-3-is-dead-killed-by-the-poodle-attack

I wouldn't do my financial transactions through this site of shit and insecurity.
If you are willing to take the risk, try to temporarily set the pref
Security.TLS.version.min to 0.
http://KB.mozillazine.org/security.TLS.version. *

You can also try with another browser. Note that if another browser can access the site from your bank, it is uncertain.

Satellite P100-286 (PSPAG) cannot connect to the TV via the s-video output

Hello

I'm trying to connect my P100 from my TV using the S-video TV output and the TV is never detected. Even if I try to "force the detection" in the nVidia control panel.

Any ideas?

Hello

Try please to find the high-quality S-video cable. I heard many years ago that some cables are wrong pinout. If you have time visit some TV expert and look for info on the S-video cables.

Computer cannot connect to the printer via the local network

I have two computers sharing a printer, the printer is connected with USB is Vista Home Premium 32-bit. The other which must be connected wireless is old computer Windows 7 Home Premium.My, I suppose his ultimate, I'm not sure tho, that works fine with the printer. This Home Premium one just can not connect to the printer. It keeps saying can't find a print reader, I downloaded a universal driver HP that I learned other positions, and he said that it was not a correct driver.

I asked our technical support to help me. And he told me that Home Premium has this problem. The only way I can solve this is to update my system at least pro. I checked online but I have not seen someone talked about this. Just make sure that is it true? If not, what can do now?

Thank you very much.

Hello

-What is the brand and model of the printer?

This isn't a problem with different versions of Windows support network printer.

I suggest you go through the following links and check if it helps.

Network printer problems

http://Windows.Microsoft.com/en-AU/Windows-Vista/troubleshoot-network-printer-problems

Note: The steps are also applicable to Windows 7.

Install a printer on a home network

http://Windows.Microsoft.com/en-us/Windows7/install-a-printer-on-a-home-network

Let us know the result once you have tried the steps mentioned in the link.

MDB cannot bind to the queue via foreign JNDI

Similar Questions

Maybe you are looking for