Cannot conect to the internet via a wireless connection secure, despite having completed the restoration of the system.

Similar Questions

• NB100 - new user. Unable to connect to the internet via a wireless connection

  * What can someone help please.*

  I bought a NB100 (Ubuntu) yesterday.
  He walks and he finds our Wi - Fi connection and got to the web. Large.

  I then ran "Update Manager" and since then I can not get internet connection.
  In 'Network settings' it shows only "Wired" & "Point to point" as the connection types.

  Also when I now click on 'Firefox Web Browser', 'Update Manager', 'Pilot' or 'Add Remove Programs' the equivalent circular hourglass appears for a few seconds, then disappears. The application does not start.

  Any guidance would be appreciated.
  Thank you.

  Post edited by: ikelsey

  That's exactly what happened here. See my post very recent inquiry about obtaining later to work. Which might be of interest, you can try the latest version to see what you think without having to install.

  With personal advice of an expert, we got the original Toshiba up-to-date and very well with the internet installation, but he still had "problems" with the sharing of files on my Windows network.

• connect to the internet via a wireless connection

  I can't locate my internet connection through the network connection in Control Panel on my secondary computer.  I searched for the connection on my computer main & unable to locate?  How do I add my network & reconnect?

  Thxs
  Nicke

  Set up the connection again

• Unable to access internet via a wireless connection

  original title; Wireless cannot be used. Only the adapter! Help someone

  someone help me please my wireless can't be used but only my adapter can be used my laptop is aspire 4741g

  On many models, there is a hardware switch - check that it has not set to the OFF"" position.

• Computer laptop Windows 7 can see other wired PC via a wireless connection by specifying the box "search programs and files" drive letter in the start menu, but not in the network screen

  My laptop with Windows 7 (64-bit) can not see the other desktop PC running Windows XP via a wireless connection, except if it is plugged into my laptop so only I can see them on the network.
  I checked all the working groups to ensure that all are the same.

  However, when my laptop into Wi - Fi, I could see the other wired desktop PC by specifying the network path in "search programs and files" to the start menu in the Windows 7 laptop, I was able to add network folder by specifying the drive letter for the connection and file I want to connect via a right click on the network to connect a network drive...

  Then, finally I can access any other desktop pc wired to shared folder via the Wi - Fi by this method.

  But I still don't see them on eventhrough network I can access by this method. Please help me solve this problem.

  Hi Hkway,

  • You are able to see the Windows 7 machine Windows XP computer when connected through wireless and if it is accessible through network?

  First of all, check if the NetBIOS protocol is installed on your Windows XP computer. To install the NetBIOS Protocol, follow these steps:

  1. click on start, click on Control Panel and then double-click network connections.

  2. right click on the card that you want to add NetBEUI to and then click Properties.

  3. on the general tab, click on install.

  4. click on Protocol and then click Add.

  5. Click to select NetBIOS protocol in the list, and then click OK.

  6. restart your computer.

  Also make sure that NetBIOS over TCP/IP is enabled in the Windows XP computer. To do this, follow these steps.

  Turn on NetBIOS over TCP/IP

  1. click onStart, click on Control Paneland then click on network connections and Internet.

  2. click onnetwork connections.

  3. right click onLocal area connectionand then click Properties.

  4. click onInternet Protocol (TCP/IP)and then click Properties.

  5. click on the tabgeneral and then click Advanced.

  6. click on theWINS tab.

  7. underNetBIOS setting, click Enable NetBIOS over TCP/IP, and then clickOK twice.

  8. click onclose to close the local area network connection properties dialog box.

  9. close the network connections window.

   

  After following the above steps, check if you can access the computer Windows XP of Windows 7 computer using the wireless connection.

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Desktop PC cannot connect while laptops successfully connect via a wireless connection on the same home network.

  I have a Windows XP desktop PC.  I also have two laptops.  I can connect to the internet via laptops via my wireless router, but I can't connect to internet via desktop even when it is plugged directly into my DSL modem.  I replaced the Ethernet cable, nothing helps.  My status of connection to the Local network on the desktop shows little or no connectivity, but I've done all the troubleshooting procedures, (including / Release ipcong & ipconfig / renew) cause a message saying: unable to contact your DHCP server.  Any thoughts on how to solve this problem?

  What's your DHCP enabled router wireless

  If yes then brand IP automatically defined in properties Office lan yor

  or try set ip next ip address manually your portable computer ip address serial with the same mask of the subnet and the gateway address.

  It can happen when dsektop cannot find the DHCP server

  Concerning

  Hope this will do the needfull

• Windows 7: no internet via an Ethernet connection, wireless is fine

  Look for help here because I'm stuck.

  PC laptop Toshiba 3 year. Ethernet and wireless have both worked fine with XP. Since the upgrade to Windows 7, my without wire is fine, but I can't connect to internet via Ethernet. Other computers in the House are connected to my router and work very well. I have configured an IP address manually (as I have on other computers) with no luck. Auto setting it will not longer work. I use just TCP/IPv4 (v6 is not checked, the old router doesn't support). I've played with just about everything I can think of and still no luck.

  The strange thing is that when I try to load a Web site, the data seem to flow in a second. For example, go to google.com, it will look like its loading but nothing will come. Then comes the text will come after 20 seconds maybe, but not the logo (ie the graphics). It will just hang there and expire. A normal webpage I visit will simply sit on a white screen then Firefox will report it is "done" at the bottom, but nothing appears.

  I also can not log - on to my router, same problem, it won't load the web interface page and any waiting period.

  Under the "Network and sharing" Center, everything seems to be fine. It will say I am connected to my network, and diagnostics will not find something wrong. Yet, no internet.

  Any ideas?

  I would reinstall the driver again, so uninstall in device and then Manager re - download the driver from the website of the manufacturer of your computer, and then install restart your computer, restart your router, and then try again

  Hope I helped...

• Problem connecting to the network via a wireless connection

  Original title: why my knees is not connecting to the internet that she used to...?

  "My automatic connection to my net service simply does not work, when I put the appp problem solving through net wireless configuration, I can see it check adapter, services and ultimately he connects to the internet, but I didn't do it before, it was automatic, another affected is the lower display side right hand that appears when you click on the" internet access "icon". If do you it while he's looking my net service name, it seems empty that a connection broadband which I didn't use before I use the modem provided by INFINITUM... YOU HAVE AND IDEA WHAT UNDERWAY? At the moment I'm connected like I got the app work and conect problems problem but it says that there is the problem; "THE DIGNOSTICS GUIDELINES SERVICE DOES NOT WORK.

  Hello

  1 did you do changes on the computer before the show?

  2. who is the application that you are talking about?

  3. What is brand and model computer?

  Method 1: Update the wireless network drivers

  See the site:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2: Reinstall the application

  See the site:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Method 3: Disable security software

   

  See the site:

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  Method 4: Perform a system restore

   

  See the site:

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.

• How to display PC on TV via a wireless connection

  Discover my computer on my tv

  How can I see my computer on my TV? I use a wireless connection and I have a WII connected to the tv and the network?

  Hi Reddogoh,

  There are two main options that I see in the connection of your television to the computer. One is a hardware solution by getting a TV tuner card, the second would be a software solution by using your internet connection (this should be a high speed / broad effective solution of the band) to stream TV on your PC. Each of these types has its own unique advantages.

  Hardware solutions (TV Tuner):

  First, there is the direct connection method. Examination of the main material here is the tuner TV for your PC card. An example of a vendor for this would be here:http://www.hauppauge.com/. The study in this case is to make sure that you have the right connection from your TV on your PC. There are several types of connections that could potentially work from your TV for PC: coaxial, RCA, S-video and VGA are some of the most common. One of the most interesting types of connection on the site mentioned would be a device which can converts a signal from coaxial cable from the TV to a USB device, which can then be plugged into your computer. One of the benefits of a hardware connection TV is the ability to record live TV, and the software for this feature is often included with the TV tuner. You can use wireless? We can as a type of adapter, but mainly the links are direct.

  Solutions software (Streaming and porn TV on broadband):

  Software solutions can be very economical because it piggy back on your existing broadband connection. Another advantage would be that the shows can be listened to on request.

  Prices can be as low as free, one example beinghttp://www.Hulu.com/ where you can listen to the full episodes of television through a license agreement between the content providers and Hulu.

  An example of a subscription model would be http://www.yourfreetelevision.com/ , which is about $30 every month.

  So, there are a few options and this should certainly point you in the right direction.

  (If this post was helpful ("vote as helpful") orAnswered ("mark as answer") to your question, please click on the corresponding button to help others find the answer more quickly.) Besides, if you feel that someone else has been useful, mark them too. Also, if you have any othercomments please let us know.)

  Hope this helps,

  Steve <> Microsoft Partner

• OfficeJet HP 8600 N911a stopped printing via a wireless connection

  There are about 3-4 weeks our 8600 Pro Officejet stopped printing via wireless connection.  I tried to uninstall and reinstall the software on the site of andf also the HP CD.  I ran the software help HP and everytime it tells me to reinstall the software.

  The printer appears on the Wi - Fi and install it correctly every time.  I can print diagnostic pages, status reports to the printer from my computer without isse.

  Pages of test and all other documents will be not print.  He says that the printer is offline.

  I live in the country and there is no wireless connection close to home that he is recovering.

  Nothing has changed from what I can tell.  the unit is out of warranty now and to get help from HP, I would have to pay $40 to get telephone assistance.

  Is there someone out there who can help?

  Thank you.

  Try the steps in this post to restart the spooler: http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/hp-photosmart-premium-c310-printer-Windows-7-operating/m-p/1118873/highlight/true#M83583

• Cannot back up the system after KB980408 & KB975496 updates

  I was not able to back up my system because these updates are installed. I have a portable hard drive that is only a few months old and was performing perfectly.

  I normally backup with an image of the system and the C drive per week, the image of the backup system fails with the message:

  "The system cannot find the specified file. (0 x 80070002) »

  I am running Windows 7 64 bit on a Compaq Presario CQ61, thank you

  [Duplicate of http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/b660dd16-fb9c-4b21-9780-3588b2faef66] ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot access the internet using a wireless connection via ATT Uverse using laptop computer with Windows XP

  My wireless Internet connection has stopped working when I converted to ATT DSL to ATT Uverse.  My laptop sees the network and says I'm connected with all the green "bars".  However, when I try to connect to the internet I have two things to happen.  Either I get a long period which ends with the message that I can't connect to the network.  Or - I can connect to the internet for a very short period of time - a part of a screen is displayed and then crashes.  I entered the codes of security several times to ensure accuracy.  How to solve this problem?

  Hello, I am an AT & T technician. It is a known problem with the NVG589, Microsoft Vista and XP.

  You can find more information, including possible workarounds for this problem here:

  http://www.att.com/eSupport/article.jsp?SID=KB92052&CV=820#fBid=6vEbMNmgXBq

  If anyone has additional information, I would certainly appreciate it. A tech, the fix for this issue is important.

• cannot update the drivers, cannot conect to the internet with them

  I have a dell laptop that I had to rebuild, it has Windows XP and the installation went great.

  my problems is that I need drivers for ethernet, network, multimedia controller and a PCI Modem.

  I can not find them on the internet with my other PC, all I can find is a scanning software that will find them for me, but the PC I need them can not conect.

  Please someone help me!

  You go to Dell and enter the service tag of the laptop?

  http://support.Dell.com/support/downloads/index.aspx?c=us&CS=19&l=en&s=DHS

• Cannot conect to the internet with vista "dependency service or group could start."

  I saw many people with this problem and don't know how yo fix it. Service dependency group was able to start. Can anyone help

  Hi Mszimmerman1,

  I regret that the issue not resolved with the steps. Try this step. This should hopefully solve the problem.

  1. click on start

  2. type cmd in the start search box

  3. right click on cmd in the upper part of the menu, and choose Run as administrator

  4. at the command prompt, type: netsh winsock reset

  5 ignore all errors, restart the computer and check if the problem persists.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] Marking a post as answer, or relatively useful, you help others find the answer faster

• Unable to connect to the network via a wireless connection.

  cannot connect to a wireless network adapter not connected

  can get Wi - Fi adapters

  Hello

  Do you have any software installed on your computer network monitoring?

  Monitor mode, or RFMON (Radio frequency monitor), allows a computer with a NIC (NIC) to monitor all traffic received from the wireless network. Unlike promiscuous mode, which is also used for packet sniffing, monitor mode allows packets to capture without having to associate with a network access point or ad - hoc first. Surveillance mode applies only to wireless networks, while "Promiscuous" mode can be used on cable networks and wireless. Surveillance mode is one of the six modes of 802.11 wireless cards can function in: Master (acting as an access point), Managed (client, also known as station), Ad - hoc mode, mesh, Repeater, and monitor.

  Limits

  Usually, the wireless adapter is unable to transmit in monitor mode and is limited to a single wireless channel, if it depends on the driver of the wireless card, its firmware and features of all of his chip. In addition, in monitor mode, the adapter does not check to see if the control of cyclic redundancy check (CRC) are correct for packets captured, then some captured packets is maybe damaged.

  If a network monitoring program is running on your computer, the wireless network adapter will be set to follow the fashion, which prevents Windows to connect to wireless networks.

  To connect to a wireless network, close the network monitoring program, or follow the instructions in the program to exit the monitor mode.

  Solve problems, find wireless networks
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Let us know if this helps

  Concerning
  Anthony