MDS Simulator set up the e-mail settings just to send mails

Similar Questions

• Smartphones from blackBerry Bold 9900 set up the e-mail icon does not not :(

  I had to go back to Blackberry Bold 9900 for awhile my Q10 screen is cracked and I sent it to be repaired. I put the new sim card in and try to set up the e-mail account he showed me the mail of size and I knew that something is wrong. I called my network provider and they have implemented my Blackberry data plan and I signed up with blackberry network. I turned my phone market and bb next to the network icon icon appeared which is good. But when I go to set up an email account and click the "email accounts" nothings happens. called my network, they do not know how to help me...

  Hello and welcome to the community!

  With a strong carrier network (for example, not only WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message from your BB... Please wait just before moving on to the next step):

  1) register HRT

  • KB00510 How to register a BlackBerry smartphone with wireless network
  • Please wait a 'registration' message reach your Messages application

  2) Remove and return Service books (pre-BB10 only devices)

  • KB05000 Remove the maintenance book for the BlackBerry Internet Service email account in the BlackBerry smartphone
  • If you do not have access CMIME, continue deleting
  • KB02830 Send the directories for the BlackBerry Internet Service
  • Please wait "the Activation' Messages, one per already configured e-mail account, arrive in your Messages. If you have not already configured email accounts, please wait 1 hour.

  3) restart

  • Pre-BB10 ONLY devices. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes.
  • Peripheral BB10. Hold the top button until the counter reaches zero. Wait for the unit to be completely stopped (for example, nothing appears on the screen, no lights, etc.). Hold the top button until the red light. Wait through the entire boot process. IF this fails, you can try the method of battery-pull above, but it is normally NOT recommended unless nothing else works.
  • See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  I hope that will move things again for you! If this isn't the case, then you can try this link from your BB browser:

  • www.BlackBerry.com/Integrate.

  Otherwise, you should contact your mobile provider for official support... but this time do not let you fob off the coast. You pay for your services, making them responsible for your formal support service, including if necessary climbing to BlackBerry-related.

  Good luck!

• How to set up the e-mail address for Microsoft Office Word (Vista Home)

  I try to send a Word document to me by e-mail. He asks me to configure the pop3 account information. Where would I be able to find this info? (I'll use my gmail account)

  He asks for a default mail client? This may work, but if not, just start a new message, and then attach the document.
   
  How to set your default e-mail to Gmail
  http://www.ehow.com/how_5151392_set-default-email-gmail.html

• BIOS does not detect not hard drive for laptop after the setting of the default BIOS settings.

  I had my 14.04 installed Ubuntu in my laptop in a reader named «Notebook hard drive» a pre-installed Windows 8. Today I put the default BIOS settings in my phone and when I rebooted it and tried to use Ubuntu by pressing 'F9' key and choosing from the menu of the BIOS I found my 'Notbook HDD"option missing. My disk of Ubuntu is still there, but I have no way to access it. Is there a way I can get it to work?

  Try turning off secure in the BIOS and then start by restarting the laptop.

• BlackBerry smartphones set up the e-mail on my 9320

  Hello

  Please bear with me, I need help to set up the service message on my phone, I get the message that there is no message services configured then I am redirected to establishing assistant who shows a PIN and no active account, then ask my email and password activication, where can I find it? I use Vodafone with EA Mobile 4 G Wifi,

  Hello and welcome to the community

  You must enter any of the configuration section 'Enterprise '. Rather use the BB exclusive services (including the ability to Push email, BBM, etc), you must have an adequate data of your carrier plan. Carriers BIS (BlackBerry Internet Service) host for their BB users. In general, BIS is not available through generic data plans. Several ships make stop what is needed the Blackberry data plan. Whatever they call it, it is the carrier that delivers BIS users of BB - contact - the for assistance. Once you have an email Push-enabled compatible BIS data plan on your BB (fees regardless of your carrier will charge, btw), your exclusive services BB will work (for example, you will have a staff/Internet Email added to the email Setup Wizard, your BBM will work, etc.).

  With hundreds of carriers in the world, each with dozens of different data plans it is impossible to say that any plan service could actually expressly provide for. Only carriers can answer this question. The best thing to do is to decide what services you want and then talk to your carrier about obtaining a data plan that allows what you want (to them).

  Good luck!

• Thunderbird connects to servers; will not set up the e-mail account

  PIMs sought after today and found out about THunderbird with lightning add-on. Downloaded TB and installed. After many attempts, web search for troubleshooting and tweaking Google account settings, always impossible to get a gmail account set up. In addition, first account set up window continues to state that TB can't connect to our servers; check the connection.

  Said Zenos

  Firewall and anti-virus are common reasons for connection failures and implementation.

  In addition, Gmail has become more difficult to implement, with their authentication system to two factors. Usually, you can choose the off-putting "lowest security setting" too.

• Impossible to set up the account on the mail application

  I am new to windows 8 and I try to use the app mail mail calendars people trio apart, and am pretty dead on the use rather than other applications. My problem is that my phone is apple so I have an email from icloud I want to put in the icloud app is not available as a type of email, so I select the other option and then select the IMAP type but I can't connect to the server. Please tell me if its possible to add it to the app! I got it to connect with outlook, so I think it should work with this app as well. Help, please! :)

  Hello Megan,

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  Do you receive an error message or a code when you say, 'I can't it to connect to the server?

  Thank you for details on the issue.

  This behavior can occur if the app files or settings are corrupt or missing.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run Troubleshooter app and then try to set up the e-mail account. This tool can automatically identify and fix problems with applications and the Windows store.
  See this link:

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  If this does not help, use method 2.

  Method 2:
  Please refer to this article and check if it helps.
  Reference:
  Messaging app for Windows
  http://Windows.Microsoft.com/en-us/Windows-8/mail-app-tutorial

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Microsoft account check your email to complete the setting of the Microsoft account, just to make sure that this e-mail address is your

  Microsoft account

  Please check your email address

  To complete the setting of the Microsoft account, we just need to make sure that this email address is yours.

  Check xxxxxxxxxx@xxxxxxx,xxx

  If you did not make this request, click here to cancel.

  Thank you

  The team Microsoft account I do not have a Microsoft Email account!  My wife did and when I click on the button check it evokes its address! I just bought a new Dell with Windows 8 and recorded with my separate email address and they send it to my e-mail address for confirmation and it evokes e-mail address of my wife in the cross reference by address or telephone numbers. It is very painful and would like to know what are my options to return to Windows 7

  Hi Patricia,

  Please follow the instructions below:

  How to check an e-mail address in your Microsoft account

  When you use a different e-mail to your Microsoft account, you get a link in an e-mail. Follow the link in that email to verify the address e-mail. If you need a new verification email:

  1. Connect to the Manage aliases for your account page.
  2. Click on validate next to your email address and then click on email.

  If you want to go for verification by phone, you must type the code that appears on the verification page. As soon as you type the phone number and click on "send code", the next page will ask you this code.

  Hope this information was useful.

• Leave messages on the e-mail server

  I want to use Windows Mail and keep messages on my server too. But when I set up the Windows Mail program that all my mail got leave the web e-mail account so that I can not access the server.
  Is there a way to have my messages in both places?

  Yes.  Come on in ' tools | Accouints | (electronic mail). Properties | Advanced' and add a check mark the box "leave a copy of the mail on the server.  You will have to remember to delete messages from your Inbox by using the web interface of the server, or by selecting "delete mail from the server after days (xx)" so it accumulates and you run out of server space.

  HAL

  --

  HAL Hostetler, TCE

  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX

  www.kvoa.com--KVOA TV, Tucson, AZ.

  Concert at the Hot Licks - www.badnewsbluesband.com

• BBM MDS Simulator problem

  I'm developing an application that needs to send something via BBM surveys, so I wanted to try it. The problem is that I can't get the BBM Simulator to run. I followed the instructions found on the Blackberry Messenger page, but when I run run.bat it says the following:

  Error image

  (why can I post the image directly?)

  -Java SE Development Kit 7 installed: C:\jdk1.7.0\

  -Java JRE installed: C:\jdk1.7.0\jre7\

  (Note that there is another folder of jre: C:\jdk1.7.0\jre\) Variable JAVA_HOME points to: C:\jdk1.7.0\

  Added "C:\jdk1.7.0\bin\;" to the front of the path variable.
  Copied files local_policy.jar and US_export_policy.jar both

  • (1) C:\jdk1.7.0\jre\lib\security; and
  • (2) C:\jdk1.7.0\jre7\lib\security

  (I first copied them only in the C:\jdk1.7.0\jre7\lib\security, but it says "have you installed unlimited strength jurisdiction policy files?")

  I have downloaded the SDK, extract the contents of "C:\BBM\", mounted in the MDS Simulator and extract the content as well.

  Running Windows 7 64 bit.

  What I'm missing here?

  Is the JDK 1.7 32-bit?  I have not tried with 1.7, only 1.6.

• BlackBerry Smartphones cannot add the e-mail account on the Bold 9900, the only option in the configuration of e-mail is enterprise activation.

  Security BB9900 husbands suffered for me to use, but I'm unable to set up the e-mail.

  The only option is to set up the email through the activation of the company.

  I have a data plan from my provider Blckberry

  I tried to register it on my carriers BIS activation Web site but got the message that it cannot be done through my camera

  Configuration of e-mail icon only gives the ability to configure one enable a business account

  Have tried blackberry.com/integrate but I get the message "unknown error, please try again" after selecting "launch email configuration".

  Any ideas?

  Hello and welcome to the community!

  With a strong carrier network (for example, not only WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message from your BB... Please wait just before moving on to the next step):

  1) register HRT

  • KB00510 How to register a BlackBerry smartphone with wireless network
  • Please wait a 'registration' message reach your Messages application

  2) books of forwarding Service

  • KB02830 Send the directories for the BlackBerry Internet Service
  • Please wait "the Activation' Messages, one per already configured e-mail account, arrive in your Messages. If you have not already configured email accounts, please wait 1 hour.

  3) restart

  • With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes.
  • See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  I hope that will move things again for you! If this isn't the case, then you should contact your mobile provider for formal support.

  Good luck!

• Not (rightly?) MDS Simulator using rimpublic.property

  I'm testing an application that manages cookies on its own, so I tried to change the rimpublic.property parameter:

  application.handler.http.CookieSupport = false

  but the MDS Simulator still manages cookies.  I then changed the value of WebServer.listen.port to 8010 and the MDS Simulator still load the web server on the default port 8080. This suggests that the MDS Simulator is not correctly read the file rimpublic.property. Initially, I had problems of file with Vista so I changed the permissions on everything under the directory "C:\Program research in Motion\BlackBerry JDE 4.7.0\MDS" so that all users have all permissions. That always has not contributed to the problem though. Anyone has ideas or information, why this is happening?

  I'm v4.7.0 JDE running and modifying this file specifically:

  C:\Program search in Motion\BlackBerry JDE 4.7.0\MDS\config\rimpublic.property

  Thank you

  Joe

  Well well if someone has the same problem, I managed to get this to work finally.

  I reinstalled everything - the JDE, all my simulators and the JDE component Package (this can be unnecessary, given that I didn't tried the next step until after I did - twice). Then in the JDE, I put the directory of MDS Simulator - CS to use the version installed by the Installer component package to 'C:\Program research in Motion\BlackBerry JDE component package 4.7.0\MDS' (Edit-> preferences, tab Simulator MDS - CS). I also had to change the properties of that directory and give total control of the users group. And of course the rimpublic.properties file is now in the directory "C:\Program search component Package Motion\BlackBerry JDE 4.7.0\MDS\config".

  It works, but one of the problems is that the instance of MDS - CS turns off automatically when I close the Simulator. But I can live with that.

• Setting up notification e-mail workflow approvals

  Hello
  
  Are there Metalink notes or blog sites that show how to configure e-mail notification of Workflow approvals (environment is R12.1.3 linux)?
  
  In particular, in my view, there is work that needs doing on the exchange server with regard to the implementation of email and files, etc.
  
  Any help appreciated.
  
  Thank you

  PL see these Docs MOS

  How does one configure Oracle Workflow Notification Mailer Applications and where is the Documentation to do this? [1051562.1 ID]
  Configuration of the envelope of Notification based on Java Oracle Workflow 2.6 with Oracle Applications 11i [ID 231286.1]
  Example of configuration of workflow Java Notification Mailer with Oracle Applications [ID 249957.1]
  How to set up the Java Mailer workflow without an IMAP account (assumes no incoming treatment) [ID 268274.1]
  http://docs.Oracle.com/CD/E18727_01/doc.121/e12903/T319398T319402.htm#T319579

  Please see old nets for doctors, you must refer to that:

  https://forums.Oracle.com/forums/search.jspa?objid=C3&q=workflow+and+R12
  https://forums.Oracle.com/forums/search.jspa?threadID=&q=workflow+and+Setup&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001
  https://forums.Oracle.com/forums/search.jspa?threadID=&q=workflow+and+troubleshooting&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001

  ;) AppsmAsti ;)
  Sharing is supported

• Cannot set the IMAP mail - configuration cannot be verified

  Hello

  I have trouble to set up my work as an Exchange IMAP messaging in a new installation of Thunderbird. Once I put in the address of the server that Thunderbird retrieved all the security settings, which I checked against the supplied parameters that are listed in the webmail. I've also used these parameters to configure mail IMAP on my phone for triple controls everything. However, in the account configuration screen, I still got the message "Configuration cannot be verified - your name of user and password correct? (again, I checked everything I used independently and they have been accepted). Once I came out of the initial configuration screen error replaced by the following:

  "The GSSAPI/Kerberos ticket is not accepted by the < email address > IMAP server. Please check that you are connected to the Kerberos/GSSAPI Kingdom".

  The only possibility I can think is that Thunderbird tries to use my e-mail instead of the server to authenticate the reason why I'm getting the error. The e-mail address is [email protected] while the server is soliscom.uu.nl.

  Any help or suggestions that anyone has would be welcome,
  See you soon.

  Under Tools/account settings /AccountName/Server Settings, check that you have for the authentication method. "Normal password" is not the most common configuration for secure connections, Kerberos/GSSAPI, which seems to be the reason why you get the error message.

  But if you are sure that the Kerberos/GSSAPI authentication is required, see this article for instructions on how to make the necessary changes in the Config. Publisher:

  https://ITServices.Stanford.edu/service/emailcalendar/email/config/thunderbird_imap_kerb

• What should be the port/security settings for Windows Mail with Vista - I think they changed?

  I had to reinstall Vista when my hard drive crashed, and Windows Mail does not work completely correctly. I think remember me an email from Microsoft told me to change the ports/security settings. Could someone tell me what they should be?

  A "error message indicating", what exactly? No error code or the relevant text?
   
  Make sure these settings match exactly.
   
  Set up Windows Mail for E-mail XFINITY/Comcast
  http://customer.Comcast.com/help-and-support/Internet/configuring-Windows-Mail-Xfinity-email
   
  
  Leave messages on the server and it clutter?